Understanding Hydrogen Atom and Hydride Transfer Processes during Electrochemical Alcohol and Aldehyde Oxidation

Electrochemical and Non-Electrochemical Pathways in the Electrocatalytic Oxidation of Monosaccharides and Related Sugar Alcohols into Valuable Products

In this contribution, we review the electrochemical upgrading of saccharides (e.g., glucose) and sugar alcohols (e.g., glycerol) on metal and metal-oxide electrodes by drawing conclusions on common trends and differences between these two important classes of biobased compounds. For this purpose, we critically review the literature on the electrocatalytic oxidation of saccharides and sugar alcohols, seeking trends in the effect of reaction conditions and electrocatalyst design on the selectivity for the oxidation of specific functional groups toward value-added compounds. Importantly, we highlight and discuss the competition between electrochemical and non-electrochemical pathways. This is a crucial and yet often neglected aspect that should be taken into account and optimized for achieving the efficient electrocatalytic conversion of monosaccharides and related sugar alcohols into valuable products, which is a target of growing interest in the context of the electrification of the chemical industry combined with the utilization of renewable feedstock.

Proton-Coupled Electron Transfer in Photoelectrochemical Alcohol Oxidation Enhanced by Nickel-Based Cocatalysts

Using biomass oxidation reactions instead of water oxidation reactions is optimal for accomplishing biomass conversion and effective hydrogen generation. Here, we report that α-Fe2O3 photoanodes with a NiOOH cocatalyst exhibit excellent performance for photoelectrochemical oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA). The conversion efficiency for HMF reaches 98.5 %, while the selectivity for FDCA is 94.2 %. We revealed that HMF is oxidized through a spontaneous proton-coupled electron transfer (PCET) process with the high-valent phase of the Ni-based catalyst. The dangling oxygen and bridging oxygen of the high-valent phase species serve as proton-accepting sites. Furthermore, we pointed out that the deprotonated bond dissociation free energy difference between the catalysts and alcohols is the thermodynamic trigger for the PCET process. This study provides a reasonable explanation for the alcohol oxidation reaction, which is beneficial for designing biomass conversion systems.

Interfacial Science for Electrosynthesis

Interfacial science and electroorganic syntheses are inextricably linked because all electrochemical reactions occur at the interface between the electrode and the solution. Thus, the surface chemistry of the electrode material impacts the organic reaction selectivity. In this short review, we highlight emergent examples of electrode surface chemistries that enable selective electroorganic synthesis in three reaction classes: (1) hydrogenation, (2) oxidation, and (3) reductive C‒C bond formation between two electrophiles. We showcase the breadth of techniques, including materials and in-situ characterization, requisite to establish mechanistic schemes consistent with the observed reactivity patterns. Leveraging an electrode's unique surface chemistry will provide complementary approaches to tune the selectivity of electroorganic syntheses and unlock an electrode's catalytic properties.

Recent Progress in Electrocatalytic Conversion of Lignin: From Monomers, Dimers, to Raw Lignin

Lignin, as the second largest renewable biomass resource in nature, has increasingly received significant interest for its potential to be transformed into valuable chemicals, potentially contributing to carbon neutrality. Among different approaches, renewable electricity-driven biomass conversion holds great promise to substitute a petroleum resource-driven one, owing to its characteristics of environmental friendliness, high energy efficiency, and tunable reactivity. The challenges lie on the polymeric structure and complex functional groups in lignin, requiring the development of efficient electrocatalysts for lignin valorization with enhanced activity and selectivity toward targeted chemicals. In this Review, we focus on the advancement of electrocatalytic valorization of lignin, from monomers, to dimers and to raw lignin, toward various value-added chemicals, with emphasis on catalyst design, reaction innovation, and mechanistic study. The general strategies for catalyst design are also summarized, offering insights into enhancing the activity and selectivity. Finally, challenges and perspectives for the electrocatalytic conversion of lignin are proposed.

Electrosynthesis of adipic acid with high faradaic efficiency within a wide potential window

Electrosynthesis of adipic acid (a precursor for nylon-66) from KA oil (a mixture of cyclohexanone and cyclohexanol) represents a sustainable strategy to replace conventional method that requires harsh conditions. However, its industrial possibility is greatly restricted by the low current density and competitive oxygen evolution reaction. Herein, we modify nickel layered double hydroxide with vanadium to promote current density and maintain high faradaic efficiency (>80%) within a wide potential window (1.5 ~ 1.9 V vs. reversible hydrogen electrode). Experimental and theoretical studies reveal two key roles of V modification, including accelerating catalyst reconstruction and strengthening cyclohexanone adsorption. As a proof-of-the-concept, we construct a membrane electrode assembly, producing adipic acid with high faradaic efficiency (82%) and productivity (1536 μmol cm-2 h-1) at industrially relevant current density (300 mA cm-2), while achieving >50 hours stability. This work demonstrates an efficient catalyst for adipic acid electrosynthesis with high productivity that shows industrial potential.

Selective lactic acid synthesis via ethylene glycol electrooxidation in borate buffer

Efficient and selective oxidation of ethylene glycol is challenging due to uncontrollable C-C bond cleavage. We propose an electrochemical strategy for the selective electrooxidation of ethylene glycol to sythesise lactic acid on a Ni-based electrocatalyst by controlling the pH value of the electrolyte solution.

Electrocatalytic Oxidation of Benzaldehyde on Gold Nanoparticles Supported on Titanium Dioxide

The electrooxidation of organic compounds offers a promising strategy for producing value-added chemicals through environmentally sustainable processes. A key challenge in this field is the development of electrocatalysts that are both effective and durable. In this study, we grow gold nanoparticles (Au NPs) on the surface of various phases of titanium dioxide (TiO2) as highly effective electrooxidation catalysts. Subsequently, the samples are tested for the oxidation of benzaldehyde (BZH) to benzoic acid (BZA) coupled with a hydrogen evolution reaction (HER). We observe the support containing a combination of rutile and anatase phases to provide the highest activity. The excellent electrooxidation performance of this Au-TiO2 sample is correlated with its mixed-phase composition, large surface area, high oxygen vacancy content, and the presence of Lewis acid active sites on its surface. This catalyst demonstrates an overpotential of 0.467 V at 10 mA cm-2 in a 1 M KOH solution containing 20 mM BZH, and 0.387 V in 100 mM BZH, well below the oxygen evolution reaction (OER) overpotential. The electrooxidation of BZH not only serves as OER alternative in applications such as electrochemical hydrogen evolution, enhancing energy efficiency, but simultaneously allows for the generation of high-value byproducts such as BZA.

Visible-Light-Enhanced Hydrogen Evolution through Anodic Furfural Electro-Oxidation Using Nickel Atomically Dispersed Copper Nanoparticles

A novel copper nanoparticle variant, denoted as Cu98Ni2 NPs, which incorporate Ni atoms in an atomically dispersed manner, has been successfully synthesized via a straightforward one-pot electrochemical codeposition process. These nanoparticles were subsequently employed as an anode to facilitate the oxidation of furfural, leading to the production of hydrogen gas. Voltammetric measurements revealed that the inclusion of trace amounts of Ni atoms in the nanoparticles resulted in a pronounced synergistic electronic effect between Cu and Ni. Consequently, a 43% increase in current density at 0.1 V was observed in comparison to pure Cu NPs. Importantly, when the Cu98Ni2 NPs were irradiated with visible light, a remarkable current density enhancement factor of 505% at 0.1 V was achieved relative to that of pure Cu NPs in the absence of light. This enhancement can be attributed to localized surface plasmon resonance induced by visible light, which triggers photothermal and photoelectric effects. These effects collectively contribute to the significant overall improvement in the electrocatalytic oxidation of furfural, leading to enhanced hydrogen evolution.

Defect-Promoted Ni-Based Layer Double Hydroxides with Enhanced Deprotonation Capability for Efficient Biomass Electrooxidation

Ni-based hydroxides are promising electrocatalysts for biomass oxidation reactions, supplanting the oxygen evolution reaction (OER) due to lower overpotentials while producing value-added chemicals. The identification and subsequent engineering of their catalytically active sites are essential to facilitate these anodic reactions. Herein, the proportional relationship between catalysts' deprotonation propensity and Faradic efficiency of 5-hydroxymethylfurfural (5-HMF)-to-2,5 furandicarboxylic acid (FDCA, FEFDCA ) is revealed by thorough density functional theory (DFT) simulations and atomic-scale characterizations, including in situ synchrotron diffraction and spectroscopy methods. The deprotonation capability of ultrathin layer-double hydroxides (UT-LDHs) is regulated by tuning the covalency of metal (M)-oxygen (O) motifs through defect site engineering and selection of M3+ co-chemistry. NiMn UT-LDHs show an ultrahigh FEFDCA of 99% at 1.37 V versus reversible hydrogen electrode (RHE) and retain a high FEFDCA of 92.7% in the OER-operating window at 1.52 V, about 2× that of NiFe UT-LDHs (49.5%) at 1.52 V. Ni-O and Mn-O motifs function as dual active sites for HMF electrooxidation, where the continuous deprotonation of Mn-OH sites plays a dominant role in achieving high selectivity while suppressing OER at high potentials. The results showcase a universal concept of modulating competing anodic reactions in aqueous biomass electrolysis by electronically engineering the deprotonation behavior of metal hydroxides, anticipated to be translatable across various biomass substrates.

Surface Ligand Modification on Ultrathin Ni(OH)2 Nanosheets Enabling Enhanced Alkaline Ethanol Oxidation Kinetics

The ethanol oxidation reaction (EOR) is an economical pathway in many electrochemical systems for clean energy, such as ethanol fuel cells and the anodic reaction in hydrogen generation. Noble metals, such as platinum, are benchmark catalysts for EOR owing to their superb electrochemical capability. To improve sustainability and product selectivity, nickel (Ni)-based electrocatalysts are considered promising alternatives to noble-metal EOR. Although Ni-based electrocatalysts are relieved from intermediate poisoning, their performances are largely limited by their relatively high onset potential. Therefore, the EOR usually competes with the oxygen evolution reaction (OER) at working potentials, resulting in a low EOR efficiency. Here, we demonstrate a strategy to modify the surface ligands on ultrathin Ni(OH)2 nanosheets, which substantially improved their catalytic properties for the alkaline EOR. Chemisorbed octadecylamine ligands could create an alcoholophilic layer at the nanosheet surface to promote alcohol diffusion and adsorption, resulting in outstanding EOR activity and selectivity over the OER at higher potential. These non-noble-metal-based 2D electrocatalysts and surface ligand engineering showcase a promising strategy for achieving high-efficiency electrocatalysis of EOR in many practical electrochemical processes.

Operando Forming of Lattice Vacancy Defect in Ultrathin Crumpled NiVW-Layered Metal Hydroxides Nanosheets for Valorization of Biomass

The 2D layered metal hydroxides (LMHs) have been developed for electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, an effective strategy is proposed to tailor the electronic structure of active sites at the atomic level, which is by introducing defects into the lattice structure. As an example, a series of ultrathin crumpled ternary NiVW-LMH electrocatalysts with abundant lattice vacancies (denoted as NiVW_v -LMH) are prepared in this way. The introduction of tungsten (W) endows the catalyst with a special crumpled structure, which promotes the generation of lattice vacancies and thus exposes more unsaturated Ni activity sites. The NiVW_v -LMH displays superb performance in the electrooxidation of HMF. The Tafel slope for electrodehydrogenation of Ni²⁺ OH bond to Ni(OH)O species is 12.04 mV dec^-1 . The current density at 1.43 V versus reversible hydrogen electrode (RHE) toward the oxidation reaction of HMF reaches about 193 mA cm^-2 , which is better than most of the common electrocatalysts, with an 5.37-fold improvement compared with Ni(OH)₂ electrode. The preparation strategy demonstrates in this work can be useful for developing highly efficient electrocatalysts.

Electrochemical Oxidation of HMF via Hydrogen Atom Transfer and Hydride Transfer on NiOOH and the Impact of NiOOH Composition

A great deal of attention has been directed toward studying the electrochemical oxidation of 5-hydroxymethylfurfural (HMF), a molecule that can be obtained from biomass-derived cellulose and hemicellulose, to 2,5-furandicarboxylic acid (FDCA), a molecule that can replace the petroleum-derived terephthalic acid in the production of widely used polymers such as polyethylene terephthalate. NiOOH is one of the best and most well studied electrocatalysts for achieving this transformation; however, the mechanism by which it does so is still poorly understood. This study quantitatively examines how two different dehydrogenation mechanisms on NiOOH impact the oxidation of HMF and its oxidation intermediates on the way to FDCA. The first mechanism is a well-established indirect oxidation mechanism featuring chemical hydrogen atom transfer to Ni3+ sites while the second mechanism is a newly discovered potential-dependent (PD) oxidation mechanism involving electrochemically induced hydride transfer to Ni4+ sites. The composition of NiOOH was also tuned to shift the potential of the Ni(OH)2 /NiOOH redox couple and to investigate how this affects the rates of indirect and PD oxidation as well as intermediate accumulation during a constant potential electrolysis. The new insights gained by this study will allow for the rational design of more efficient electrochemical dehydrogenation catalysts.

Electrochemical Dehydrogenation Pathways of Amines to Nitriles on NiOOH

Nitriles are highly important synthetic intermediates with applications in a wide variety of organic reactions including production of pharmaceuticals, fine chemicals, and agricultural chemicals. Thus, developing effective green routes to oxidize amines to nitriles is of great interest. One promising method to achieve the oxidation of primary amines to nitriles is through electrochemical oxidation on NiOOH electrodes. This reaction has long been thought to occur through an indirect mechanism consisting of a series of potential independent hydrogen atom transfer steps to catalytic Ni³⁺ sites in NiOOH, which reduces NiOOH to Ni(OH)₂. The role of the applied potential in this mechanism is simply to regenerate NiOOH by oxidizing Ni(OH)₂. In this work, we demonstrate that a second, potential-dependent pathway recently found to apply to alcohol and aldehyde oxidation on NiOOH and consisting of potential-dependent hydride transfer to Ni⁴⁺ sites is the dominant pathway for the oxidation of amines using propylamine and benzylamine as model systems. After qualitatively and quantitatively examining the contributions of indirect and potential-dependent oxidation pathways to amine oxidation on NiOOH, we also examine the effect the amine concentration, solution pH, applied bias, and deuterium substitution have on the two pathways, further clarifying their mechanisms and exploring what factors control their rate. This work provides a comprehensive understanding of the mechanism of primary amine oxidation on NiOOH.