Coadsorption of NRR and HER Intermediates Determines the Performance of Ru-N4 toward Electrocatalytic N2 Reduction

Single Atom Catalysts Based on Earth-Abundant Metals for Energy-Related Applications

Anthropogenic activities related to population growth, economic development, technological advances, and changes in lifestyle and climate patterns result in a continuous increase in energy consumption. At the same time, the rare metal elements frequently deployed as catalysts in energy related processes are not only costly in view of their low natural abundance, but their availability is often further limited due to geopolitical reasons. Thus, electrochemical energy storage and conversion with earth-abundant metals, mainly in the form of single-atom catalysts (SACs), are highly relevant and timely technologies. In this review the application of earth-abundant SACs in electrochemical energy storage and electrocatalytic conversion of chemicals to fuels or products with high energy content is discussed. The oxygen reduction reaction is also appraised, which is primarily harnessed in fuel cell technologies and metal-air batteries. The coordination, active sites, and mechanistic aspects of transition metal SACs are analyzed for two-electron and four-electron reaction pathways. Further, the electrochemical water splitting with SACs toward green hydrogen fuel is discussed in terms of not only hydrogen evolution reaction but also oxygen evolution reaction. Similarly, the production of ammonia as a clean fuel via electrocatalytic nitrogen reduction reaction is portrayed, highlighting the potential of earth-abundant single metal species.

Toward High-Performance Electrochemical Ammonia Synthesis by Circumventing the Surface H-Mediated N2 Reduction

The rapid performance decay with potentials is a significant obstacle to achieving an efficient electrocatalytic N2 reduction reaction (eNRR), which is typically attributed to competition from hydrogen evolution. However, the potential-dependent competitive behavior and reaction mechanism are still under debate. Herein, we theoretically defined N2 adsorption, H mediation, and H2 evolution as three crucial regions along the potentials by revisiting the potential-dependent competitive adsorption between N2 and H on FeN4 and RuN4 catalysts. We revealed that the surface H-mediated mechanism makes eNRR feasible at low potentials but introduces sluggish reaction kinetics, showing a double-edged sword nature. In view of this, we proposed a new possibility to achieve high-performance NH3 synthesis by circumventing the H-mediated mechanism, where the ideal catalyst should have a wide potential interval with N2-dominated adsorption to trigger direct eNRR. Using this mechanistic insight as a new criterion, we proposed a theoretical protocol for eNRR catalyst screening, but almost none of the theoretically reported electrocatalysts passed the assessment. This work not only illustrates the intrinsic mechanism behind the low-performance dilemma of eNRR but also points out a possible direction toward designing promising catalysts with high selectivity and high current density.

Multifunctional Strategies of Advanced Electrocatalysts for Efficient Urea Synthesis

The electrochemical reduction of nitrogenous species (such as N2, NO, NO2 -, and NO3 -) for urea synthesis under ambient conditions has been extensively studied due to their potential to realize carbon/nitrogen neutrality and mitigate environmental pollution, as well as provide a means to store renewable electricity generated from intermittent sources such as wind and solar power. However, the sluggish reaction kinetics and the scarcity of active sites on electrocatalysts have significantly hindered the advancement of their practical applications. Multifunctional engineering of electrocatalysts has been rationally designed and investigated to adjust their electronic structures, increase the density of active sites, and optimize the binding energies to enhance electrocatalytic performance. Here, surface engineering, defect engineering, doping engineering, and heterostructure engineering strategies for efficient nitrogen electro-reduction are comprehensively summarized. The role of each element in engineered electrocatalysts is elucidated at the atomic level, revealing the intrinsic active site, and understanding the relationship between atomic structure and catalytic performance. This review highlights the state-of-the-art progress of electrocatalytic reactions of waste nitrogenous species into urea. Moreover, this review outlines the challenges and opportunities for urea synthesis and aims to facilitate further research into the development of advanced electrocatalysts for a sustainable future.

Covalent Organic Frameworks for Electrocatalysis: Design, Applications, and Perspectives

Covalent organic frameworks (COFs) are an innovative class of crystalline porous polymers composed of light elements such as C, N, O, etc., linked by covalent bonds. The distinctive properties of COFs, including designable building blocks, large specific surface area, tunable pore size, abundant active sites, and remarkable stability, have led their widespread applications in electrocatalysis. In recent years, COF-based electrocatalysts have made remarkable progress in various electrocatalytic fields, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, nitrogen reduction reaction, nitrate reduction reaction, and carbon dioxide reduction reaction. This review begins with an introduction to the design and synthesis strategies employed for COF-based electrocatalysts. These strategies include heteroatom doping, metalation of COF and building monomers, encapsulation of active sites within COF pores, and the development of COF-based derived materials. Subsequently, a systematic overview of the recent advancements in the application of COF-based catalysts in electrocatalysis is presented. Finally, the review discusses the main challenges and outlines possible avenues for the future development of COF-based electrocatalysts.

Exploring Nitrogen Reduction Reaction Mechanisms with Graphyne-Confined Single-Atom Catalysts: A Computational Study Incorporating Electrode Potential and pH

This study reconciles discrepancies between practical electrochemical conditions and theoretical density functional theory (DFT) frameworks, evaluating three graphyne-confined single-atom catalysts (Mo-TEB, Mo@GY, and Mo@GDY). Using both constant charge models in vacuum and constant potential models with continuum implicit solvation, we closely mimic real-world electrochemical environments. Our findings highlight the crucial role of explicitly incorporating electrode potential and pH in the constant potential model, providing enhanced insights into the nitrogen reduction reaction (NRR) mechanisms. Notably, the superior NRR performance of Mo-TEB is attributed to the d-band center's proximity to the Fermi level and enhanced magnetic moments at the atomic center. This research advances our understanding of graphyne-confined single-atom catalysts as effective NRR platforms and underscores the significance of the constant potential model for accurate DFT studies of electrochemical reactions.

Enhanced electrochemical nitrate reduction on copper nitride with moderate intermediates adsorption

Nitrate in surface and underground water caused systematic risk to the ecological environment. The electrochemically reduction of nitrate into ammonia (NO3RR), offering a sustainable route for nitrate containing wastewater treatment and ammonia fertilizer conversion. Exploration of catalyst with improved catalytic activity with lower energy barriers is still challenging. Here, we report a copper nitride (Cu3N) catalyst with moderate *NOx and *H2O intermediates adsorptions showed enhanced NO3RR performance. Density functional theory calculations reveals that the unique electronic structure of Cu3N provides efficient active sites for NO3RR, thus enabled balanced adsorption of *NO3 and *H2O (ΔE descriptor), sufficient active hydrogen, and moderate intermediate (*NO3 → HNO3, *NH2→*NH3) adsorption energy. Notably, the in-situ analysis technology revealed potential-driven reconstruction and rehabilitation of Cu3N, forming possible nitrogen vacancy, thus implied for better mechanism understanding. The NO3RR activity of Cu3N surpasses that of most recent catalysts and demonstrates superior stability and implies the application for NH4+ fertilizer recovery, which maintaining an NH3 Faradaic efficiency of 93.1 % and high yield rate of 2.9 mg cm2h-1 at -0.6 V versus RHE. These findings broaden the application scenarios of Cu3N catalyst for ammonia synthesis and provide strategy on improving NO3RR performance.

Theoretical Investigations of Hydrolysis Mechanisms of N(SiMe3)3

Tris(trimethylsilyl)amine (N(SiMe3)3) is one of the most important intermediate products in the indirect synthesis of ammonia (NH3) from nitrogen (N2), which could be hydrolyzed to NH3 under mild conditions. Herein, the hydrolysis mechanism of N(SiMe3)3 has been systematically investigated using density functional theory (DFT) with explicit combined implicit water models. Under neutral conditions, the active barrier of the hydrolysis of N(SiMe3)3 is 17.6 kcal mol-1 in water solvent. The attacking of proton to N center and OH group to the Si atom from water is decoupled for the stabilization of OH group by solvent water molecules, which lower the hydrolysis energy barriers. Furthermore, under acid conditions, N(SiMe3)3 is easily coordinated with proton to form [NH(SiMe3)3]+, and the energy barrier of the hydrolysis reaction could be reduced to 11.5 kcal mol-1 of the first stage, making it being promoted according to the chemical equilibrium. Thus, the results provide an explanation for the possible mechanism of the quantitative conversion of N(SiMe3)3 to NH3 under mild conditions. The decoupled hydrolysis mechanism may play important role in other hydrolysis processes.

In Situ Characterization Techniques for Electrochemical Nitrogen Reduction Reaction

The electrochemical reduction of nitrogen to produce ammonia is pivotal in modern society due to its environmental friendliness and the substantial influence that ammonia has on food, chemicals, and energy. However, the current electrochemical nitrogen reduction reaction (NRR) mechanism is still imperfect, which seriously impedes the development of NRR. In situ characterization techniques offer insight into the alterations taking place at the electrode/electrolyte interface throughout the NRR process, thereby helping us to explore the NRR mechanism in-depth and ultimately promote the development of efficient catalytic systems for NRR. Herein, we introduce the popular theories and mechanisms of the electrochemical NRR and provide an extensive overview on the application of various in situ characterization approaches for on-site detection of reaction intermediates and catalyst transformations during electrocatalytic NRR processes, including different optical techniques, X-ray-based techniques, electron microscopy, and scanning probe microscopy. Finally, some major challenges and future directions of these in situ techniques are proposed.

Engineered Electron-Deficient Sites at Boron-Doped Strontium Titanate/Electrolyte Interfaces Accelerate the Electrocatalytic Reduction of N2 to NH3: A Combined DFT and Experimental Electrocatalysis Study

The development of an efficient, selective, and durable catalysis system for the electrocatalytic N2 reduction reaction (ENRR) is a promising strategy for the sustainable production of ammonia. The high-performance ENRR is limited by two major challenges: poor adsorption of N2 over the catalyst surface and abysmal N2 solubility in aqueous electrolytes. Herein, with the help of our combined density functional theory (DFT) calculations and experimental electrocatalysis study, we demonstrate that concurrently induced electron-deficient Lewis acid sites in an electrocatalyst and in an electrolyte medium can significantly boost the ENRR performance. The DFT calculations, ex situ X-ray photoelectron and FTIR spectroscopy, electrochemical measurements, and N2-TPD (temperature-programmed desorption) over boron-doped strontium titanate (BSTO) samples reveal that the Lewis acid-base interactions of N2 synergistically enhance the adsorption and activation of N2. Besides, the B-dopant induces the defect sites (oxygen vacancies and Ti3+) that assist in enhanced N2 adsorption and results in suppressed hydrogen evolution due to B-induced electron-deficient sites for H+ adsorption. The insights from the DFT study evince that B prefers the Srtop position (on top of Sr) where N2 adsorbs in an end-on configuration, which favors the associative alternating pathway and suppresses the competitive hydrogen evolution. Thus, our combined experimental and DFT study demonstrates an insight toward enhancing the ENRR performance along with the suppressed hydrogen evolution via concurrently engineered electron-deficient sites at electrode and electrolyte interfaces.

Aqueous alternating electrolysis prolongs electrode lifespans under harsh operation conditions

It is vital to explore effective ways for prolonging electrode lifespans under harsh electrolysis conditions, such as high current densities, acid environment, and impure water source. Here we report alternating electrolysis approaches that realize promptly and regularly repair/maintenance and concurrent bubble evolution. Electrode lifespans are improved by co-action of Fe group elemental ions and alkali metal cations, especially a unique Co2+-Na+ combo. A commercial Ni foam sustains ampere-level current densities alternatingly during continuous electrolysis for 93.8 h in an acidic solution, whereas such a Ni foam is completely dissolved in ~2 h for conventional electrolysis conditions. The work not only explores an alternating electrolysis-based system, alkali metal cation-based catalytic systems, and alkali metal cation-based electrodeposition techniques, and beyond, but demonstrates the possibility of prolonged electrolysis by repeated deposition-dissolution processes. With enough adjustable experimental variables, the upper improvement limit in the electrode lifespan would be high.

Hydrogen Electrode Reactions in Energy-Related Electrocatalysis Systems

Hydrogen electrode reactions, including hydrogen evolution reactions and hydrogen oxidation reactions, are fundamental and crucial within aqueous electrochemistry. Particularly in energy-related electrocatalysis processes, there is a consistent involvement of hydrogen-related electrochemical processes, underscoring the need for in-depth study. This review encompasses significant reports, delving into elementary steps and reaction mechanisms of hydrogen electrode reactions, as well as catalyst design strategies. In addition, we focus on the application of hydrogen electrode reaction mechanism in different energy-related electrocatalytic reactions, and the significance of the promotion and suppression of reaction kinetics in different reaction systems. It thoroughly elucidated the significance of these reactions and the need for a deeper understanding, offering a novel perspective for the future development of this field.

Impact of Vacancy Defects on Electrochemical Nitrogen Reduction Reaction Performance of MXenes

We investigated electrochemical nitrogen reduction reaction (eNRR) on MXenes consisting of the vacancy defects in the functional layer using density functional theory calculations. We considered Mo2C, W2C, Mo2N, and W2N MXenes with F, N, and O functionalization and investigated distal and alternative associative pathways. We analyzed these MXenes for eNRR based on N2 adsorption energy, NH3 desorption energy, NRR selectivity, and electrochemical limiting potential. While we find that most of the considered MXenes surfaces are more favorable for eNRR compared to hydrogen evolution, these surfaces also have strong NH3 binding (>-1.0 eV) and thus will be covered with NH3 during operating conditions. Amongst all considered MXenes, only W2NF2 is found to have a low NH3 desorption energy along with low eNRR overpotential and selectivity towards eNRR. The obtained eNRR overpotential and NH3 desorption energy on W2NF2 are superior to those reported for pristine W2N3 as well as functionalized MXenes.

Synthesis of Rhenium-Doped Copper Twin Boundary for High-Turnover-Frequency Electrochemical Nitrogen Reduction

The precise design and synthesis of active sites to improve catalyst's performance has emerged as a promising tactic for electrochemistry. However, it is challenging to combine different types of active sites and manipulate them simultaneously at atomic resolution. Here, we present a strategy to synthesize Re atom-doped Cu twin boundaries (TBs), through pulsed electrodeposition and boundary segregation. The Re-doped Cu TBs demonstrate a highly efficient nitrogen reduction reaction (NRR) performance. Re-doped Cu TBs showed a turnover frequency of ∼5889 s-1, ∼800 times higher than the pure Cu TB active centers (∼7 s-1). In addition to the "acceptance-donation" activation of N2 molecules, theoretical calculations also reveal that the Re-Re dimer on TB can boost the NRR and impede the hydrogen evolution reaction synchronously, rendering Re-doped Cu TB catalysts with high NRR activity and selectivity.

A novel two-dimensional Janus TiSiGeN4 monolayer with N vacancies for efficient photocatalytic nitrogen reduction

The photocatalytic nitrogen reduction reaction (pNRR) is a clean technology that converts H2O and N2 into NH3 under environmental conditions using inexhaustible sunlight. Herein, we designed a novel two-dimensional (2D) Janus TiSiGeN4 structure and evaluated the pNRR performance of the structure with the presence of nitrogen vacancies at different positions using density functional theory (DFT) calculations. The intrinsic dipoles in the Janus TiSiGeN4 structure generate a built-in electric field, which promotes the migration of photogenerated electrons and holes towards the (001) and (00-1) surfaces, respectively, to achieve efficient charge separation. For the pNRR, the Si atoms exposed after the formation of top N vacancies can realize the efficient activation of N2 through the "acceptance-donation" mechanism, while the presence of middle N vacancies not only suppresses the hydrogen evolution reaction, a competition reaction, but also lowers the reaction barrier for the protonation of N atoms. The limiting potential of TiSiGeN4 with the coexistence of both top and middle N vacancies (TiSiGeN4-VN-mt) is as low as -0.44 V. In addition, the introduction of N vacancies generates defect levels, narrowing the band gap and improving the light response. This work provides theoretical guidance for the design of efficient pNRR photocatalysts under mild conditions.

Design of high performance nitrogen reduction electrocatalysts by doping defective polyoxometalate with a single atom promoter

Single-atom catalysts (SACs) are emerging as promising candidates for electrochemical nitrogen reduction reaction (NRR). Previous studies have shown that the single-atom centers of SACs can not only serve as active sites, but also act as promoters to affect the catalytic properties. However, the use of single metal atoms as promoters in electrocatalysis has rarely been studied. In this work, the defective Keggin-type phosphomolybdic acid (PMA) is used as a substrate to support the single metal atoms. We aim to tune the electronic structures of the exposed molybdenum active sites on defective PMA by using these supported single atoms as promoters for efficient NRR. Firstly, the stability and N2 adsorption capacity were studied to screen for an effective catalyst capable of activating N2. Most of the SACs were found to have good stability and N2 adsorption capacity. Then, we compared the selectivity and NRR activity of the catalysts and found that catalysts with metal atom promoters have improved NRR selectivity and activity. Finally, electronic structure analysis was carried out to understand the promoting effect of the promoter on N2 activation and the activity of the NRR process. This work provides a new strategy for designing efficient catalysts for electrocatalytic reactions by introducing promoters.

Intelligent multifunctional ruthenium monoatomic/ZnAl-LDH photocatalysts for simultaneous detection and rapid degradation of antibiotics

The construction and precise synthesis of materials based on functional and structural orientations have emerged as a pivotal platform in the field of environmental management. In this paper, an efficient and stable catalyst (RuLDH) was constructed to achieve this goal. RuLDH comprises individual Ru atoms that are uniformly dispersed on ZnAl-LDH, achieved by room temperature stirring. Remarkably, RuLDH exhibits exceptional performance under visible light, effectively triggering the photocatalytic degradation of tetracycline hydrochloride (TC) via peroxymonosulfate (PMS) with a remarkable efficiency of 100%, all while avoiding the generation of highly toxic intermediates. In addition, RuLDH0.2 demonstrated its utility in fluorescence detection of TC, showcasing commendable analytical performance characterized by rapid response, low detection limit, and robust resistance to environmental interferences (with a detection limit of 1.0 mg/L). Notably, the RuLDH0.2/PMS/Vis system exhibited remarkable efficacy in treating actual pesticide wastewater, effectively exerting bactericidal and disinfectant effects. This study serves as a source of inspiration for the design of multifunctional single-atom catalysts, thereby pushing the boundaries of "integration of diagnosis and treatment" in environmental management and control.

Jahn-Teller Distortions Induced by in situ Li Migration in λ-MnO2 for Boosting Electrocatalytic Nitrogen Fixation

Lithium-mediated electrochemical nitrogen reduction reaction (Li-NRR) completely eschews the competitive hydrogen evolution reaction (HER) occurred in aqueous system, whereas the continuous deposition of lithium readily blocks the active sites and further reduces the reaction kinetics. Herein, we propose an innovative in situ Li migration strategy to realize that Li substitutes Mn sites in λ-MnO2 instead of evolving into the dead Li. Comprehensive characterizations corroborate that the intercalation of Li+ at high voltage breaks the structural integrity of MnO6 octahedron and further triggers unique Jahn-Teller distortions, which promotes the spin state regulation of Mn sites to generate the ameliorative eg orbital configuration and accelerates N≡N bond cleavage via eg -σ and eg -π* interaction. To this end, the resulted cationic disordered LiMnO4 delivers the recorded highest NH3 yield rate of 220 μg h-1  cm-2 and a Faradaic efficiency (FE) 83.80 % in organic electrolyte.

Aqueous Electroreduction of Nitric Oxide to Ammonia at Low Concentration via Vacancy Engineered FeOCl

Electroreduction of nitric oxide (NO) to NH3 (NORR) has gained extensive attention for the sake of low carbon emission and air pollutant treatment. Unfortunately, NORR is greatly hindered by its sluggish kinetics, especially under low concentrations of NO. Herein, we developed a chlorine (Cl) vacancy strategy to overcome this limitation over FeOCl nanosheets (FeOCl-VCl ). Density functional theory (DFT) calculations revealed that the Cl vacancy resulted in defective Fe with sharp d-states characteristics in FeOCl-VCl to enhance the absorption and activation of NO. In situ X-ray absorption near-edge structure (XANES) and attenuated total reflection-infrared spectroscopy (ATR-IR) verified the lower average oxidation state of defective Fe to enhance the electron transfer for NO adsorption/activation and facilitate the generation of key NHO and NHx intermediates. As a result, the FeOCl-VCl exhibited superior NORR activities with the NH3 Faradaic efficiency up to 91.1 % while maintaining a high NH3 yield rate of 455.4 μg cm-2  h-1 under 1.0 vol % NO concentration, competitive with those of previously reported literatures under higher NO concentration. Further, the assembled Zn-NO battery utilizing FeOCl-VCl as cathode delivered a record peak power density of 6.2 mW cm-2 , offering a new route for simultaneous NO removal, NH3 production, and energy supply.

The Advances, Challenges, and Perspectives on Electrocatalytic Reduction of Nitrogenous Substances to Ammonia: A Review

Ammonia (NH3) is considered to be a critical chemical feedstock in agriculture, industry, and other fields. However, conventional Haber-Bosch (HB) ammonia (NH3) production suffers from high energy consumption, harsh reaction conditions, and large carbon dioxide emissions. Despite the emergence of electrocatalytic reduction of nitrogenous substances to NH3 under ambient conditions as a new frontier, there are several bottleneck problems that impede the commercialization process. These include low catalytic efficiency, competition with the hydrogen evolution reaction, and difficulties in breaking the N≡N triple bond. In this review, we explore the recent advances in electrocatalytic NH3 synthesis, using nitrogen and nitrate as reactants. We focus on the contribution of the catalyst design, specifically based on molecular-catalyst interaction mechanisms, as well as chemical bond breaking and directional coupling mechanisms, to address the aforementioned problems during electrocatalytic NH3 synthesis. Finally, we discuss the relevant opportunities and challenges in this field.

Modeling Single-Atom Catalysis

Electronic structure calculations represent an essential complement of experiments to characterize single-atom catalysts (SACs), consisting of isolated metal atoms stabilized on a support, but also to predict new catalysts. However, simulating SACs with quantum chemistry approaches is not as simple as often assumed. In this work, the essential factors that characterize a reliable simulation of SACs activity are examined. The Perspective focuses on the importance of precise atomistic characterization of the active site, since even small changes in the metal atom's surroundings can result in large changes in reactivity. The dynamical behavior and stability of SACs under working conditions, as well as the importance of adopting appropriate methods to solve the Schrödinger equation for a quantitative evaluation of reaction energies are addressed. The Perspective also focuses on the relevance of the model adopted. For electrocatalysis this must include the effects of the solvent, the presence of electrolytes, the pH, and the external potential. Finally, it is discussed how the similarities between SACs and coordination compounds may result in reaction intermediates that usually are not observed on metal electrodes. When these aspects are not adequately considered, the predictive power of electronic structure calculations is quite limited.

A Readily Achieved Potentiostatic Method in Density Functional Theory Calculation for Improved Prediction of the Performance for Electrocatalytic Nitrogen Reduction Reaction

Accurate prediction of the catalytic performance of nitrogen reduction reaction catalysts based on density functional theory (DFT) calculation is of great significance for developing catalytic materials for nitrogen fixation. However, the applied electrode potential induced the fixation of Fermi level and solvation effect are commonly ignored in the current computational hydrogen electrode method, which leads to the large deviation between the calculation predicted limit potential and the experimentally measured limit potential. In this work, the simple external iteration method is proposed to simulate the Fermi level of the catalysts that are fixed by the applied electrode potential, along with the hybrid solvent model to describe the strong interaction, such as hydrogen bond, between the solvent molecules and the intermediates. This method allowed the theoretical and experimental limit potentials to be in good agreement, indicating the significant effect of the electrode potential and solvation in the DFT calculation. These results will guide the calculation-based prediction of other reaction systems in the field of electrocatalysis.

Continuous electroproduction of formate via CO2 reduction on local symmetry-broken single-atom catalysts

Atomic-level coordination engineering is an efficient strategy for tuning the catalytic performance of single-atom catalysts (SACs). However, their rational design has so far been plagued by the lack of a universal correlation between the coordination symmetry and catalytic properties. Herein, we synthesised planar-symmetry-broken CuN3 (PSB-CuN3) SACs through microwave heating for electrocatalytic CO2 reduction. Remarkably, the as-prepared catalysts exhibited a selectivity of 94.3% towards formate at -0.73 V vs. RHE, surpassing the symmetrical CuN4 catalyst (72.4% at -0.93 V vs. RHE). In a flow cell equipped with a PSB-CuN3 electrode, over 90% formate selectivity was maintained at an average current density of 94.4 mA cm-2 during 100 h operation. By combining definitive structural identification with operando X-ray spectroscopy and theoretical calculations, we revealed that the intrinsic local symmetry breaking from planar D4h configuration induces an unconventional dsp hybridisation, and thus a strong correlation between the catalytic activity and microenvironment of metal centre (i.e., coordination number and distortion), with high preference for formate production in CuN3 moiety. The finding opens an avenue for designing efficient SACs with specific local symmetries for selective electrocatalysis.

Built-in Electric Field-Induced Work Function Reduction in C-Co3O4 for Efficient Electrochemical Nitrogen Reduction

Co3O4 is a highly selective catalyst for the electrochemical conversion of N2 to NH3. However, the large work function (WF) of Co3O4 leads to unsatisfactory activity. To address this issue, a strong built-in electric field (BIEF) was constructed in Co3O4 by doping C atoms (C-Co3O4) to reduce the WF for improving the electrocatalytic performance. C-Co3O4 exhibited a remarkable NH3 yield of 38.5 μg h-1 mgcat-1 and a promoted FE of 15.1% at -0.3 V vs RHE, which were 2.2 and 1.9 times higher than those of pure Co3O4, respectively. Kelvin probe force microscopy (KPFM), zeta potential, and ultraviolet photoelectron spectrometry (UPS) confirmed the formation of strong BIEF and WF reduction in C-Co3O4. Additionally, in situ Raman measurements and density functional theory (DFT) calculations revealed the relationship between BIEF and WF and provided insights into the reaction mechanism. Our work offers valuable guidance for the design and development of more efficient nitrogen reduction catalysts.

Role of Peripheral Coordination Boron in Electrocatalytic Nitrogen Reduction over N-Doped Graphene-Supported Single-Atom Catalysts

In this work, we investigate the effect of peripheral B doping on the electrocatalytic nitrogen reduction reaction (NRR) performance of N-doped graphene-supported single-metal atoms using density functional theory (DFT) calculations. Our results showed that the peripheral coordination of B atoms could improve the stability of the single-atom catalysts (SACs) and weaken the binding of nitrogen to the central atom. Interestingly, it was found that there was a linear correlation between the change in the magnetic moment (μ) of single-metal atoms and the change in the limiting potential (U_L) of the optimum NRR pathway before and after B doping. It was also found that the introduction of the B atom suppressed the hydrogen evolution reaction, thereby enhancing the NRR selectivity of the SACs. This work provides useful insights into the design of efficient SACs for electrocatalytic NRR.

Activating dual atomic electrocatalysts for the nitric oxide reduction reaction through the P/S element

The development of efficient atomic electrocatalysts to resolve the activity and selectivity issues of the nitric oxide reduction reaction (NORR) has increasingly received more attention but is still challenging. The current research on the dual atomic NORR electrocatalyst is exclusively focused on TM atoms. Herein, we propose a novel mechanism of introducing a P/S element, which takes advantage of finite orbitals to active the transition metal (TM) atoms of dual atomic electrocatalysts for NORR. The finite orbitals can hinder the capture of the lone pair electrons of NO but modulate the electronic configurations of the neighboring TM and thus the "donation-backdonation" mechanism can be realized. Through large-scale first-principles calculations, the catalytic performance of a series of P/S-TM biatoms supported by the monolayer CN (P/S-TM@CN) is evaluated. According to a "four-step" screening strategy, P-Cu@CN and S-Ni@CN are successfully screened as promising catalysts with outstanding activity and high selectivity for direct NO-to-NH₃ conversion. Moreover, we identify Δε_d-p as a valid descriptor to evaluate the adsorption of NO on such catalysts, allowing for reducing the number of catalytic candidates. Our work thus provides a new direction for the rational design of dual atomic electrocatalysts.

Synthesis of F-doped materials and applications in catalysis and rechargeable batteries

Elemental doping is one of the most essential techniques for material modification. It is well known that fluorine is considered to be a highly efficient and inexpensive dopant in the field of materials. Fluorine is one of the most reactive elements with the highest electronegativity (χ = 3.98). Compared to cationic doping, anionic doping is another valuable method for improving the properties of materials. Many materials have physicochemical limitations that affect their practical application in the field of catalysis and rechargeable ion batteries. Many researchers have demonstrated that F-doping can significantly improve the performance of materials for practical applications. This paper reviews the applications of various F-doped materials in photocatalysis, electrocatalysis, lithium-ion batteries, and sodium-ion batteries, as well as briefly introducing their preparation methods and mechanisms to provide researchers with more ideas and options for material modification.

Modulating Lewis acidic active sites of Fe doped Bi2MoO6 nanosheets for enhanced electrochemical nitrogen fixation

Electrocatalytic nitrogen reduction reaction (NRR) for artificial ammonia synthesis under mild conditions has been considered as a promising alternative to the conventional Haber-Bosch method. The highly desired efficient NRR still faced with the mulriple challenges of adsorption and activation of N₂ and limited Faraday efficiency. Here, Fe-doped Bi₂MoO₆ nanosheets fabricated by one step synthesis exhibits high NH₃ yield rate of 71.01 μg·h^-1·mg^-1 and Faraday Efficiency of 80.12%. The decreased electron density of Bi in collaboration with Lewis acid active sites on Fe-doped Bi₂MoO₆, jointly enhance the adsorption and activation of Lewis basic N₂. Benefited from surface texture optimization and the superior ability of N₂ adsorption and activation, the increasing density of effective active sites greatly improve the NRR behavior. This work provides new opportunities for developing efficient and highly selective catalysts for NH₃ synthesis via NRR.

Rational Design of Cu-Doped Tetrahedron of Spinel Oxide for High-Performance Nitric Oxide Electrochemical Sensor

The real-time detection of nitric oxide (NO) in living cells is essential to reveal its physiological processes. However, the popular electrochemical detection strategy is limited to the utilization of noble metals. The development of new detection candidates without noble metal species still maintaining excellent catalytic performance has become a big challenge. Herein, we propose a spinel oxide doped with heteroatom-Cu-doped Co₃O₄ (Cu-Co₃O₄) for the sensitive and selective detection of NO release from the living cells. The material is strategically designed with Cu occupying the tetrahedral (T_d) center of Co₃O₄ through the formation of a Cu-O bond. The introduced Cu regulates the local coordination environment and optimizes the electronic structure of Co₃O₄, hybridizing with the N 2p orbital to enhance charge transfer. The Cu_Td site can well inhibit the current response to nitrite (NO₂^-), resulting in a high improvement in the electrochemical oxidation of NO. The selectivity of Cu-Co₃O₄ can be markedly improved by the pore size of the molecular sieve and the negative charge on the surface. The rapid transmission of electrons is due to the fact that Cu-Co₃O₄ can be uniformly and densely in situ grown on Ti foil. The rationally designed Cu-Co₃O₄ sensor displays excellent catalytic activity toward NO oxidation with a low limit of detection of 2.0 nM (S/N = 3) and high sensitivity of 1.9 μA nM^-1 cm^-2 in cell culture medium. The Cu-Co₃O₄ sensor also shows good biocompatibility to monitor the real-time NO release from living cells (human umbilical vein endothelial cells: HUVECs; macrophage: RAW 264.7 cells). It was found that a remarkable response to NO was obtained in different living cells when stimulated by l-arginine (l-Arg). Moreover, the developed biosensor could be used for real-time monitoring of NO released from macrophages polarized to a M1/M2 phenotype. This cheap and convenient doping strategy shows universality and can be used for sensor design of other Cu-doped transition metal materials. The Cu-Co₃O₄ sensor presents an excellent example through the design of proper materials to implement unique sensing requirements and sheds light on the promising strategy for electrochemical sensor fabrication.

Cu2+1O/Ag Heterostructure for Boosting the Electrocatalytic Nitrate Reduction to Ammonia Performance

Electrocatalytic nitrate reduction reaction (ENO₃RR) is an alternative, sustainable, and environmentally friendly value-added NH₃ synthesis method under ambient conditions relative to the traditional Haber-Bosch process; however, its low NH₃ yield, low Faradaic efficiency (FE), low selectivity, and low conversion rate severely restrict the development. In this work, a Cu₂₊₁O/Ag-CC heterostructured electrocatalyst was successfully fabricated by constructing a heterogeneous interface between Cu₂₊₁O and Ag for selective electrochemical nitrate-to-ammonia conversion. The construction of the heterogeneous interface effectively promotes the synergistic effect of the catalytically active components Cu₂₊₁O and Ag, which enhances the material conductivity, accelerates the interfacial electron transfer, and exposes more active sites, thus improving the performance of ENO₃RR. Such Cu₂₊₁O/Ag-CC manifests a high NH₃ yield of 2.2 mg h^-1 cm^-2 and a notable ammonia FE of 85.03% at the optimal applied potential of -0.74 V vs RHE in a relatively low concentration of 0.01 M NO₃^--containing 0.1 M KOH. Moreover, it shows excellent electrochemical stability during the cycle tests. Our study not only provides an efficient catalyst for ammonia electro-synthesis from ENO₃RR but also an effective strategy for the construction of ENO₃RR electrocatalysts for electrocatalytic applications.

Approximating constant potential DFT with canonical DFT and electrostatic corrections

The complexity of electrochemical interfaces has led to the development of several approximate density functional theory (DFT)-based schemes to study reaction thermodynamics and kinetics as a function of electrode potential. While fixed electrode potential conditions can be simulated with grand canonical ensemble DFT (GCE-DFT), various electrostatic corrections on canonical, constant charge DFT are often applied instead. In this work, we present a systematic derivation and analysis of the different electrostatic corrections on canonical DFT to understand their physical validity, implicit assumptions, and scope of applicability. Our work highlights the need to carefully address the suitability of a given model for the problem under study, especially if physical or chemical insight in addition to reaction energetics is sought. In particular, we analytically show that the different corrections cannot differentiate between electrostatic interactions and covalent or charge-transfer interactions. By numerically testing different models for CO₂ adsorption on a single-atom catalyst as a function of the electrode potential, we further show that computed capacitances, dipole moments, and the obtained physical insight depend sensitively on the chosen approximation. These features limit the scope, generality, and physical insight of these corrective schemes despite their proven practicality for specific systems and energetics. Finally, we suggest guidelines for choosing different electrostatic corrections and propose the use of conceptual DFT to develop more general approximations for electrochemical interfaces and reactions using canonical DFT.

Single Ru-N4 Site-Embedded Porous Carbons for Electrocatalytic Nitrogen Reduction

Ammonia is an effective feedstock for chemicals, fertilizers, and energy storage. The electrocatalytic nitrogen reduction reaction (NRR) is an alternative, efficient, and clean technology for ammonia production, relative to the traditional Haber-Bosch method. Single-metal catalysts are widely studied in the field of NRR. However, very limited conclusions have been made on how to precisely modulate the coordination environment of the single-metal-atom sites to boost catalytic NRR performance. Herein, we report a 5,7-membered carbon ring-involved porous carbon (PC) preparation toward single-atom Ru-embedded PCs. As electrocatalysts, such materials exhibit surprisingly promising catalytic NRR properties with an NH₃ yield rate of up to 67.8 ± 4.9 μg h^-1 mg_cat^-1 and a Faradaic efficiency of 19.5 ± 0.6%, exceeding those of most of the reported single-atom NRR catalysts. Extended X-ray absorption fine structure demonstrates that the presence of topological defects increases the Ru-N bond from 1.48 to 1.56 Å, modulating the coordination environment of the single-atom Ru active sites. Density functional theory-calculated results demonstrate that the adsorption of N₂ onto single-atom Ru surrounded by topological defects extends the N≡N bond to 1.146 Å, weakening the strength of N≡N and making it susceptible to the NRR. All in all, this work provides a new design strategy by involving topological defects and corresponding large polarization around the Ru single atom to boost the catalytic NRR performance. Such a concept can also be applied to many other kinds of catalysts for energy storage and conversion.

A High-Throughput Screening toward Efficient Nitrogen Fixation: Transition Metal Single-Atom Catalysts Anchored on an Emerging π-π Conjugated Graphitic Carbon Nitride (g-C10N3) Substrate with Dirac Dispersion

TM-N_x is becoming a comforting catalytic center for sustainable and green ammonia synthesis under ambient conditions, resulting in increasing interest in single-atom catalysts (SACs) for the electrochemical nitrogen reduction reaction (NRR). However, given the poor activity and unsatisfactory selectivity of existing catalysts, it remains a long-standing challenge to design efficient catalysts for nitrogen fixation. Currently, the two-dimensional (2D) graphitic carbon-nitride substrate provides abundant and evenly distributed holes for stably supporting transition-metal atoms, which presents a fascinating prospect for overcoming this challenge and promoting single-atom NRR. An emerging holey graphitic carbon-nitride skeleton with a C₁₀N₃ stoichiometric ratio (g-C₁₀N₃) from a supercell of graphene is constructed, which provides outstanding electric conductivity for achieving high-efficiency NRR due to the Dirac band dispersion. Herein, a high-throughput first-principles calculation is carried out to evaluate the feasibility of π-d conjugated SACs resulting from a single TM atom anchored on g-C₁₀N₃ (TM = Sc-Au) for NRR. We find that W metal embedded in g-C₁₀N₃ (W@g-C₁₀N₃) can compromise the ability to adsorb the key target reaction species (N₂H and NH₂), hence acquiring an optimal NRR behavior among 27 TM-candidates. Our calculations demonstrate that W@g-C₁₀N₃ shows a well-suppressed HER ability and, impressively, a low energy cost of -0.46 V. Additionally, all-around descriptors are proposed to uncover the fundamental mechanism of NRR activity, among which a 3D volcano plot (limiting potential, screening strategy, and electron origin) uncovers the NRR activity trend, achieving a quick and high-efficiency prescreening for numerous candidates. Overall, the strategy of the structure- and activity-based TM-N_x-containing unit design will offer useful insight for further theoretical and experimental attempts.

Electrochemical Generation of Catalytically Active Edge Sites in C2 N-Type Carbon Materials for Artificial Nitrogen Fixation

The electrochemical nitrogen reduction reaction (NRR) to ammonia (NH₃ ) is a potentially carbon-neutral and decentralized supplement to the established Haber-Bosch process. Catalytic activation of the highly stable dinitrogen molecules remains a great challenge. Especially metal-free nitrogen-doped carbon catalysts do not often reach the desired selectivity and ammonia production rates due to their low concentration of NRR active sites and possible instability of heteroatoms under electrochemical potential, which can even contribute to false positive results. In this context, the electrochemical activation of nitrogen-doped carbon electrocatalysts is an attractive, but not yet established method to create NRR catalytic sites. Herein, a metal-free C₂ N material (HAT-700) is electrochemically etched prior to application in NRR to form active edge-sites originating from the removal of terminal nitrile groups. Resulting activated metal-free HAT-700-A shows remarkable catalytic activity in electrochemical nitrogen fixation with a maximum Faradaic efficiency of 11.4% and NH₃ yield of 5.86 µg mg^-1 _cat h^-1 . Experimental results and theoretical calculations are combined, and it is proposed that carbon radicals formed during activation together with adjacent pyridinic nitrogen atoms play a crucial role in nitrogen adsorption and activation. The results demonstrate the possibility to create catalytically active sites on purpose by etching labile functional groups prior to NRR.

Synergistic Interaction of MoS2 Nanoflakes on La2Zr2O7 Nanofibers for Improving Photoelectrochemical Nitrogen Reduction

Ammonia is a suitable hydrogen carrier with each molecule accounting for up to 17.65% of hydrogen by mass. Among various potential ammonia production methods, we adopt the photoelectrochemical (PEC) technique, which uses solar energy as well as electricity to efficiently synthesize ammonia under ambient conditions. In this article, we report MoS₂@La₂Zr₂O₇ heterostructures designed by incorporating two-dimensional (2D)-MoS₂ nanoflakes on La₂Zr₂O₇ nanofibers (MoS₂@LZO) as photoelectrocatalysts. The MoS₂@LZO heterostructures are synthesized by a facile hydrothermal route with electrospun La₂Zr₂O₇ nanofibers and Mo precursors. The MoS₂@LZO heterostructures work synergistically to amend the drawbacks of the individual MoS₂ electrocatalysts. In addition, the harmonious activity of the mixed phase of pyrochlore/defect fluorite-structured La₂Zr₂O₇ nanofibers generates an interface that aids in increased electrocatalytic activity by enriching oxygen vacancies in the system. The MoS₂@LZO electrocatalyst exhibits an enhanced Faradaic efficiency and ammonia yield of approximately 2.25% and 10.4 μg h^-1 cm^-2, respectively, compared to their corresponding pristine samples. Therefore, the mechanism of improving the PEC ammonia production performance by coupling oxygen-vacant sites to the 2D-semiconductor-based electrocatalysts has been achieved. This work provides a facile strategy to improve the activity of PEC catalysts by designing an efficient heterostructure interface for PEC applications.

Lattice-Confined Single-Atom Fe1 Sx on Mesoporous TiO2 for Boosting Ambient Electrocatalytic N2 Reduction Reaction

Mimicking natural nitrogenase to create highly efficient single-atom catalysts (SACs) for ambient N₂ fixation is highly desired, but still challenging. Herein, S-coordinated Fe SACs on mesoporous TiO₂ have been constructed by a lattice-confined strategy. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy spectra demonstrate that Fe atoms are anchored in TiO₂ lattice via the FeS₂ O₂ coordination configuration. Theoretical calculations reveal that FeS₂ O₂ sites are the active centers for electrocatalytic nitrogen reduction reaction (NRR). Moreover, the finite element analysis shows that confinement of opened and ordered mesopores can facilitate the mass transport and offer an enlarged active surface area for NRR. As a result, this catalyst delivers a favorable NH₃ yield rate of 18.3 μg h^-1  mg_cat. ^-1 with a high Faradaic efficiency of 17.3 % at -0.20 V versus a reversible hydrogen electrode. Most importantly, this lattice-confined strategy is universal and can also be applied to Ni₁ S_x @TiO₂ , Co₁ S_x @TiO₂ , Mo₁ S_x @TiO₂ , and Cu₁ S_x @TiO₂ SACs. Our study provides new hints for the design and biomimetic synthesis of highly efficient NRR electrocatalysts.

Computational Insight into Metallated Graphynes as Single Atom Electrocatalysts for Nitrogen Fixation

The electrochemical nitrogen reduction reaction (NRR) is expected to achieve sustainable ammonia synthesis via direct nitrogen fixation; however, the high-quality catalysts that play a crucial role in the NRR are still lacking. The emerging transition metal-1,3,5-triethynylbenzene (TM-TEB) frameworks offer attractive possibilities in the electrochemical catalysis due to the featured atomic and electronic structures. This work presents a comprehensive first-principles study of the TM-TEB systems for TMs from the first three d-block series and systematically explores their potential applications as NRR electrocatalysts. By designing a hierarchical screening strategy, the TM-TEB systems are evaluated based on the NRR catalytic activity as well as the competition from the hydrogen evolution reaction. In addition, in order to have a deeper understanding of the catalytic activities of the TM-TEB systems, diverse possible NRR paths on the TM-TEB surfaces are completely analyzed as well. Our analysis reveals that the TM-TEB systems with TM = V, Mo, Tc, W, and Os are electrocatalysts with a high NRR catalytic activity, while among them, only Mo- and V-TEB show promising NRR selectively. This work demonstrates the great potential of the TM-TEB systems as electrocatalysts in the NRR process, which improves the understanding of the TM-TEB systems and can motivate further exploration of their application in catalysis.