Borrowing Hydrogen Amination Reactions: A Complex Analysis of Trends and Correlations of the Various Reaction Parameters

Ruthenium Complexes with NNN-Pincer Ligands for N-Methylation of Amines Using Methanol

A series of ruthenium complexes (Ru1-Ru4) bearing new NNN-pincer ligands were synthesized in 58-78% yields. All of the complexes are air and moisture stable and were characterized by IR, NMR, and high-resolution mass spectra (HRMS). In addition, the structures of Ru1-Ru3 were confirmed by X-ray crystallographic analysis. These Ru(II) complexes exhibited high catalytic efficiency and broad functional group tolerance in the N-methylation reaction of amines using CH3OH as both the C1 source and solvent. Experimental results indicated that the electronic effect of the substituents on the ligands considerably affects the catalytic reactivity of the complexes in which Ru3 bearing an electron-donating OMe group showed the highest activity. Deuterium labeling and control experiments suggested that the dehydrogenation of methanol to generate ruthenium hydride species was the rate-determining step in the reaction. Furthermore, this protocol also provided a ready approach to versatile trideuterated N-methylamines under mild conditions using CD3OD as a deuterated methylating agent.

Functional group tolerant hydrogen borrowing C-alkylation

Hydrogen borrowing is an attractive and sustainable strategy for carbon-carbon bond formation that enables alcohols to be used as alkylating reagents in place of alkyl halides. However, despite intensive efforts, limited functional group tolerance is observed in this methodology, which we hypothesize is due to the high temperatures and harsh basic conditions often employed. Here we demonstrate that room temperature and functional group tolerant hydrogen borrowing can be achieved with a simple iridium catalyst in the presence of substoichiometric base without an excess of reagents. Achieving high yields necessitates the application of anaerobic conditions to counteract the oxygen sensitivity of the catalytic iridium hydride intermediate, which otherwise leads to catalyst degradation. Substrates containing heteroatoms capable of complexing the catalyst exhibit limited room temperature reactivity, but the application of moderately higher temperatures enables extension to a broad range of medicinally relevant nitrogen rich heterocycles. These newly developed conditions allow alcohols possessing functional groups that were previously incompatible with hydrogen borrowing reactions to be employed.

Carbon-Supported Ru-Ni and Ru-W Catalysts for the Transformation of Hydroxyacetone and Saccharides into Glycol-Derived Primary Amines

Nitrogen-containing molecules are used for the synthesis of polymers, surfactants, agrochemicals, and dyes. In the context of green chemistry, it is important to form such compounds from bioresource. Short-chain primary amines are of interest for the polymer industry, like 2-aminopropanol, 1-aminopropan-2-ol, and 1,2-diaminopropane. These amines can be formed through the amination of oxygenated substrates, preferably in aqueous phase. This is possible with heterogeneous catalysts, however, effective systems that allow reactions under mild conditions are lacking. We report an efficient catalyst Ru-Ni/AC for the reductive amination of hydroxyacetone into 2-aminopropanol. The catalyst has been reused during 3 cycles demonstrating a good stability. As a prospective study, extension to the reactivity of (poly)carbohydrates has been realized. Despite a lesser efficiency, 2-aminopropanol (9 % yield of amines) has been formed from fructose, the first example from a carbohydrate. This was possible using a 7.5 %Ru-36 %WxC/AC catalyst, composition allowing a one-pot retro-aldol cleavage into hydroxyacetone and reductive amination. The transformation of cellulose through sequential reactions with a combination of 30 %W2C/AC and 7.5 %Ru-36 %WxC/AC system gave 2 % of 2-aminopropanol, corresponding to the first example of the formation of this amine from cellulose with heterogeneous catalysts.

Manganese-catalyzed C-C and C-N bond formation with alcohols via borrowing hydrogen or hydrogen auto-transfer

Transition-metal-mediated "borrowing hydrogen" also known as hydrogen auto-transfer reactions allow the sustainable construction of C-C and C-N bonds using alcohols as hydrogen donors. In recent years, manganese complexes have been explored as efficient catalysts in these reactions. This review highlights the significant progress made in manganese-catalyzed C-C and C-N bond-formation reactions via hydrogen auto-transfer, emphasizing the importance of this methodology and manganese catalysts in sustainable synthesis strategies.

Oxygen-Dependent Ligand-Controlled Iron-Catalyzed Chemoselective Synthesis of Olefins and Vinyl Nitriles

An oxygen-dependent ligand-controlled chemoselective synthesis of vinyl nitriles and E-olefins by coupling a variety of alcohols and benzyl cyanides, catalyzed by a well-characterized, air-stable, easy-to-prepare Fe(II) catalyst (1a) bearing a redox-active arylazo pincer (L1a) is reported. The azo-moiety of the ligand backbone acts as an electron and hydrogen reservoir, enabling catalyst 1a to efficiently produce a broad spectrum of vinyl nitriles and E-olefins in moderate to good yields selectively under an oxygen and argon atmosphere, respectively.

Manganese-Catalyzed Mono-N-Methylation of Aliphatic Primary Amines without the Requirement of External High-Hydrogen Pressure

The synthesis of mono-N-methylated aliphatic primary amines has traditionally been challenging, requiring noble metal catalysts and high-pressure H2 for achieving satisfactory yields and selectivity. Herein, we developed an approach for the selective coupling of methanol and aliphatic primary amines, without high-pressure hydrogen, using a manganese-based catalyst. Remarkably, up to 98 % yields with broad substrate scope were achieved at low catalyst loadings. Notably, due to the weak base-catalyzed alcoholysis of formamide intermediates, our novel protocol not only obviates the addition of high-pressure H2 but also prevents side secondary N-methylation, supported by control experiments and density functional theory calculations.

N-Alkylation of aromatic amines with alcohols by using a commercially available Ru complex under mild conditions

An N-alkylation procedure has been developed under very mild conditions using a known commercially available Ru-based catalyst. As a result, a wide range of aromatic primary amines has been selectively alkylated with several primary alcohols, yielding the corresponding secondary amines in high yields. The methodology also enables the methylation of anilines in refluxing methanol and the preparation of a set of heterocycles in a straightforward way.

Metal-organic framework-derived CoNx nanoparticles on N-doped carbon for selective N-alkylation of aniline

N-alkylation of anilines by alcohols can be used as an efficient strategy to synthesise a wide range of secondary amines. In this respect, a hydrogen borrowing methodology has been explored using precious metal-based catalysts. However, the utilisation of cheap and readily available transition metal based catalysts is required for large-scale applications. In this work, we have reported metal-organic framework-derived CoNx@NC catalysts for the selective N-alkylation of anilines with different types of alcohols. The Co-N coordination in CoNx@NC was found to be extremely important to improve the conversion efficiency and yield of the product. As a result, CoNx@NC produced 99% yield of the desired amines, which is far better than that of Co@C (yield = 65%). In addition, CoNx@NC showed remarkable recyclability for six cycles with a minimum drop in the yield of the desired product.

Transition-Metal-Catalyzed C-C Bond Formation from C-C Activation

ConspectusC-C single bonds are ubiquitous in organic compounds. The activation and subsequent functionalization of C-C single bonds provide a unique opportunity to synthesize conventionally inaccessible molecules through the rearrangement of carbon skeletons, often with a favorable atom and step economy. However, the C-C bonds are thermodynamically and kinetically inert. Consequently, the activation of C-C bonds is particularly attractive yet challenging in the field of organic chemistry. In the past decade, we sought to develop efficient strategies to carry out transition-metal-catalyzed diverse C-C cleavage/C-C forming reactions and to obtain some insights into the intrinsic reactivities of different C-C bonds. With our efforts, readily available alcohols, carboxylic acids, and ketones served as suitable substrates for the catalytic C-C coupling reactions, which are reviewed in this Account. In 2009, we observed a Ni-catalyzed cross coupling of aryl nitriles with arylboronic esters through C-CN cleavage. Encouraged by these results, we are interested in transition-metal-catalyzed C-C bond activation. Due to their broad availability, we then turned our attention to C-C cleavage of carboxylic acids. Rhodium-catalyzed decarbonylative coupling of carboxylic acids with (hetero)arenes was then achieved through oxidative addition of in situ formed, more reactive mixed anhydrides to Rh(I) without the need for oxidants that are commonly required for the decarboxylative coupling of carboxylic acids. Subsequently, the decarbonylation of more challenging unstrained aryl ketones was realized under Rh catalysis assisted by N-containing directing groups. Following this work, a group exchange of aryl ketones with carboxylic acids was achieved through 2-fold C-C bond cleavage. By employing the chelation strategy, Rh-catalyzed C-C bond activation of secondary benzyl alcohols was also accomplished through β-carbon elimination of the rhodium alcoholate intermediates. The competing oxidation of secondary alcohols to ketones via β-hydrogen elimination of the same intermediates was suppressed as thermodynamically favorable five-membered rhodacycles are formed after β-carbon elimination. Different types of transformations of alcohols, including the Heck-type reaction with alkenes, cross coupling with arylsilanes, and Grignard-type addition with aldehydes or imines, have been achieved, showing the great potential of secondary alcohols in the formation of C-C bonds. These C-C bond-forming reactions are complementary to traditional cross couplings of aryl halides with organometallic reagents. However, these transformations produce small molecules as byproducts. To improve the atom economy, we then investigated C-C bond transformations of strained-ring cyclic compounds. Ni-catalyzed intermolecular cyclization of benzocyclobutenones with alkynes was recently achieved via the uncommon cleavage of the C1-C8 bond by employing a removable blocking strategy. Rh-catalyzed intramolecular annulation of benzocyclobutenols with alkynes was also achieved. In summary, our developments demonstrate the great potential of transition-metal-catalyzed C-C bond activation for the formation of new C-C bonds. To further expand the synthetic utility of C-C bond activation, more efforts are required to expand the substrate scope and to achieve earth-abundant metal-catalyzed transformations.

Catalytic Amination of Alcohols Using Diazo Compounds under Manganese Catalysis Through Hydrogenative N-Alkylation Reaction

Sustainable chemical production requires fundamentally new types of catalysts and catalytic technologies. The development of coherent and robust catalytic systems based on earth-abundant transition metals is essential, but highly challenging. Herein, we systematically explored a general hydrogenative cleavage/N-alkylation tandem of cyclic and acyclic diazo (N=N) compounds to value-added amines under manganese catalysis. The reaction is catalyzed by a single-site molecular manganese complex and proceeds via tandem dehydrogenation, transfer hydrogenation, and borrowing hydrogenation strategies. Interestingly, the reaction involves abundantly available renewable feedstocks, such as alcohols, that can act as (transfer)hydrogenating and alkylating agents. The synthetic application of our approach in large-scale pharmaceutical synthesis and easy access to highly demanding N-CH3 /CD3 derivatives are also demonstrated. Kinetic studies show that the reaction rate depends on the concentration of alcohol and Mn-catalyst and follows fractional orders. Several selective bond activation/formation reactions occur sequentially via amine-amide metal-ligand cooperation.

An Asymmetric Hydrogenation/N-Alkylation Sequence for a Step-Economical Route to Indolizidines and Quinolizidines

The direct catalytic asymmetric hydrogenation of pyridines for the synthesis of piperidines remains a challenge. Herein, we report a one-pot asymmetric hydrogenation of pyridines with subsequent N-alkylation using a traceless Brønsted acid activation strategy. Catalyzed by an iridium-BINAP complex, the substrates undergo ketone reduction, cyclization and pyridine hydrogenation in sequence to form indolizidines and quinolizidines. The absolute configuration of the stereocenter of the alcohol is retained and influences the formation of the second stereocenter. Experimental and theoretical mechanistic studies reveal that the chloride anion and certain noncovalent interactions govern the stereoselectivity of the cascade reaction throughout the catalytic process.

Using the Colloidal Method to Prepare Au Catalysts for the Alkylation of Aniline by Benzyl Alcohol

Using the colloidal method, attempts were made to deposit Au NPs on seven different material supports (TiO2, α and γ-Al2O3, HFeO2, CeO2, C, and SiO2). The deposition between 0.8 and 1 wt% of Au NPs can be generally achieved, apart for SiO2 (no deposition) and α-alumina (0.3 wt%). The resultant sizes of the Au NPs were dependent on the nature as well as the surface area of the support. The catalytic activity and selectivity of the supported Au catalysts were then compared in the alkylation of aniline by benzyl alcohol. Correlations were made between the nature of the support, the size of the Au NP, and the H-binding energy. A minimum H-binding energy of 1100 μV K-1 was found to be necessary for high selectivity for the secondary amine. Comparisons of the TEM images of the pre- and post-reaction catalysts also revealed the extent of Au NP agglomeration under the reaction conditions.

Benzimidazol-2-ylidene ruthenium complexes for C-N bond formation through alcohol dehydrogenation

A low temperature hydrogen borrowing approach to generate secondary amines using benzimidazole-based N-heterocyclic carbene (BNHC) ruthenium complexes is reported. A series of the piano-stool complexes of the type [(η6-p-cymene)(BNHC)RuCl2] (1a-g) were synthesized via one-pot reaction of the NHC salt precursor, Ag2O, and [RuCl2(p-cymene)]2 and characterized using conventional spectroscopic techniques. The geometry of two precursors, [(η6-p-cymene)(Me4BnMe2BNHCCH2OxMe)RuCl2] (1f) and [(η6-p-cymene)(Me5BnMe2BNHCCH2OxMe)RuCl2] (1g), was studied by single crystal X-ray diffraction. These catalysts were found to dehydrogenate alcohols efficiently at temperatures as low as 50 °C to allow Schiff-base condensation and subsequent imine hydrogenation to afford secondary amines. Notably, this ruthenium-based procedure enables the N-alkylation of aromatic and heteroaromatic primary amines with a wide range of primary alcohols in excellent yields of up to 98%. The present methodology is green and water is liberated as the sole byproduct.

Ionic-Liquid Hydrogen-Bonding Promoted Alcohols Amination over Cobalt Catalyst via Dihydrogen Autotransfer Mechanism

Higher amines are important high-valuable chemicals with wide applications, and amination of alcohols is a green route to them, which however generally suffers from harsh reaction conditions and use of equivalent base. Herein, we report an ionic-liquid (IL) hydrogen-bonding promoted dihydrogen autotransfer strategy for amination of alcohols to higher amines over cobalt catalyst under base-free conditions. Co(BF4 )2  ⋅ 6 H2 O complexed with triphos and IL (e. g., tetrabutylphosphonium tetrafluoroborate, [P4444 ][BF4 ]) shows high performances for the reaction and is tolerant of a wide scope of amines and alcohols, affording higher amines in good to excellent yields. Mechanism investigation indicates that the [BF4 ]- anion activates the alcohol via hydrogen bonding, promoting transfer of both hydroxyl H and α-H atoms of alcohol to the cobalt catalyst to form an aldehyde intermediate and cobalt dihydride complex, which are involved in the subsequent reductive amination. This strategy provides a green and effective route for alcohol amination, which may have promising applications in alcohol-involved alkylation reactions.

Enantioconvergent transformations of secondary alcohols through borrowing hydrogen catalysis

Direct substitution of readily available alcohols is recognized as a key research area in green chemical synthesis. Starting from simple racemic secondary alcohols, the achievement of catalytic enantioconvergent transformations of the substrates will be highly desirable for efficient access to valuable enantiopure compounds. To accomplish such attractive yet challenging transformations, the strategy of the enantioconvergent borrowing hydrogen methodology has proven to be uniquely effective and versatile. This review aims to provide an overview of the impressive progress made on this topic of research that has only thrived in the past decade. In particular, the conversion of racemic secondary alcohols to enantioenriched chiral amines, N-heterocycles, higher-order alcohols and ketones will be discussed in detail.

Ir-Catalyzed Synthesis of Functionalized Pyrrolidines and Piperidines Using the Borrowing Hydrogen Methodology

The Ir(III)-catalyzed synthesis of 3-pyrrolidinols and 4-piperidinols combining 1,2,4-butanetriol or 1,3,5-pentanetriol with primary amines was carried out. This borrowing hydrogen methodology was further extended to the sequential diamination of triols leading to amino-pyrrolidines and amino-piperidines.

N-Alkylation of Amines by C1-C10 Aliphatic Alcohols Using A Well-Defined Ru(II)-Catalyst. A Metal-Ligand Cooperative Approach

A Ru(II)-catalyzed efficient and selective N-alkylation of amines by C1-C10 aliphatic alcohols is reported. The catalyst [Ru(L^1a)(PPh₃)Cl₂] (1a) bearing a tridentate redox-active azo-aromatic pincer, 2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline (L^1a) is air-stable, easy to prepare, and showed wide functional group tolerance requiring only 1.0 mol % (for N-methylation and N-ethylation) and 0.1 mol % of catalyst loading for N-alkylation with C3-C10 alcohols. A wide array of N-methylated, N-ethylated, and N-alkylated amines were prepared in moderate to good yields via direct coupling of amines and alcohols. 1a efficiently catalyzes the N-alkylation of diamines selectively. It is even suitable for synthesizing N-alkylated diamines using (aliphatic) diols producing the tumor-active drug molecule MSX-122 in moderate yield. 1a showed excellent chemo-selectivity during the N-alkylation using oleyl alcohol and monoterpenoid β-citronellol. Control experiments and mechanistic investigations revealed that the 1a-catalyzed N-alkylation reactions proceed via a borrowing hydrogen transfer pathway where the hydrogen removed from the alcohol during the dehydrogenation step is stored in the ligand backbone of 1a, which in the subsequent steps transferred to the in situ formed imine intermediate to produce the N-alkylated amines.

Iridium-Catalyzed Enantioconvergent Borrowing Hydrogen Annulation of Racemic 1,4-Diols with Amines

We present an enantioconvergent access to chiral N-heterocycles directly from simple racemic diols and primary amines, through a highly economical borrowing hydrogen annulation. The identification of a chiral amine-derived iridacycle catalyst was the key for achieving high efficiency and enantioselectivity in the one-step construction of two C-N bonds. This catalytic method enabled a rapid access to a wide range of diversely substituted enantioenriched pyrrolidines including key precursors to valuable drugs such as aticaprant and MSC 2530818.

Zn(II)-Catalyzed Selective N-Alkylation of Amines with Alcohols Using Redox Noninnocent Azo-Aromatic Ligand as Electron and Hydrogen Reservoir

We report a sustainable and eco-friendly approach for selective N-alkylation of various amines by alcohols, catalyzed by a well-defined Zn(II)-catalyst, Zn(L^a)Cl₂ (1a), bearing a tridentate arylazo scaffold. A total of 57 N-alkylated amines were prepared in good to excellent yields, out of which 17 examples are new. The Zn(II)-catalyst shows wide functional group tolerance, is compatible with the synthesis of dialkylated amines via double N-alkylation of diamines, and produces the precursors in high yields for the marketed drugs tripelennamine and thonzonium bromide in gram-scale reactions. Control reactions and DFT studies indicate that electron transfer events occur at the azo-chromophore throughout the catalytic process, which shuttles between neutral azo, one-electron reduced azo-anion radical, and two-electron reduced hydrazo forms acting both as electron and hydrogen reservoir, enabling the Zn(II)-catalyst for N-alkylation reaction.

N-Heterocyclic Carbene-Supported Nickel-Catalyzed Selective (Un)Symmetrical N-Alkylation of Aromatic Diamines with Alcohols

The "borrowing hydrogen" (BH) approach for the N-alkylation of phenylenediamines using alcohols as coupling partners is highly challenging due to the selectivity issue of the generated products. Furthermore, the development of base-metal systems that can potentially substitute precious metals with competitive activity is a major challenge in BH catalysis. We present herein an efficient protocol for the N,N'-di-alkylation of aromatic diamines using an in situ-generated Ni-NHC complex from NiCl₂ and the ligand L1, which gave access to a wide range of N,N'-di-alkylated orthophenylene diamines (rather than the generally observed benzimidazole derivatives), meta- and para-phenylene diamines along with 2,6-diamino pyridine derivatives in good to excellent yields. Moreover, the catalyst system was also successful in the derivatization of a clinically important drug molecule, Dapsone. Notably, the present protocol could be applied effectively to synthesize unsymmetrically substituted N,N'-di-alkylated diamines via sequential alkylation and is the first report in the base-metal system to the best of our knowledge. Diverse control experiments including the deuterium incorporation studies suggest that the present protocol proceeds via a BH sequence.

General Construction of Amine via Reduction of N=X (X = C, O, H) Bonds Mediated by Supported Nickel Boride Nanoclusters

Amines play an important role in synthesizing drugs, pesticides, dyes, etc. Herein, we report on an efficient catalyst for the general construction of amine mediated by nickel boride nanoclusters supported by a TS-1 molecular sieve. Efficient production of amines was achieved via catalytic hydrogenation of N=X (X = C, O, H) bonds. In addition, the catalyst maintains excellent performance upon recycling. Compared with the previous reports, the high activity, simple preparation and reusability of the Ni-B catalyst in this work make it promising for industrial application in the production of amines.

Disarming the alkoxide trap to access a practical FeCl3 system for borrowing-hydrogen N-alkylation

Disarming the alkoxide trap using an in situ reduction strategy to access a practical FeCl3 and N-heterocyclic carbene system for borrowing-hydrogen N-alkylation.