Mediating the Oxidizing Capability of Surface-Bound Hydroxyl Radicals Produced by Photoelectrochemical Water Oxidation to Convert Glycerol into Dihydroxyacetone

Changing Benzoxazole Ring into Nonring Imine Linkages on Covalent Organic Frameworks with Tuning H2O2 Photosynthesis Performance

Two π-conjugated covalent organic frameworks (COFs) with nonring imine or benzoxazole ring linkages were prepared by reacting 3,3'-dihydrooxybenzidine (BDOH) with 3,5-triformylbenzene (Tb) in the presence or absence of benzimidazole (BDOH-Tb-IM and BDOH-Tb-BO). Although two COFs indicated similar composition, crystalline structures, and morphologies, imine-based BDOH-Tb-IM exhibited a photocatalytic H2O2 production rate of 2490 μmol·g-1·h-1 in sacrificial reagent-free pure water, higher than that of benzoxazole-based BDOH-Tb-BO-a (1168 μmol·g-1·h-1). The higher photocatalytic activity of BDOH-Tb-IM was attributed to its more efficient photoinduced charge separation and utilization efficiency and different 2e- ORR active sites over the two COFs. This study demonstrated an available ring effect to adjust photocatalytic performance between π-conjugated COFs.

Solar-driven highly selective conversion of glycerol to dihydroxyacetone using surface atom engineered BiVO4 photoanodes

Dihydroxyacetone is the most desired product in glycerol oxidation reaction because of its highest added value and large market demand among all possible oxidation products. However, selectively oxidative secondary hydroxyl groups of glycerol for highly efficient dihydroxyacetone production still poses a challenge. In this study, we engineer the surface of BiVO4 by introducing bismuth-rich domains and oxygen vacancies (Bi-rich BiVO4-x) to systematically modulate the surface adsorption of secondary hydroxyl groups and enhance photo-induced charge separation for photoelectrochemical glycerol oxidation into dihydroxyacetone conversion. As a result, the Bi-rich BiVO4-x increases the glycerol oxidation photocurrent density of BiVO4 from 1.42 to 4.26 mA cm-2 at 1.23 V vs. reversible hydrogen electrode under AM 1.5 G illumination, as well as the dihydroxyacetone selectivity from 54.0% to 80.3%, finally achieving a dihydroxyacetone production rate of 361.9 mmol m-2 h-1 that outperforms all reported values. The surface atom customization opens a way to regulate the solar-driven organic transformation pathway toward a carbon chain-balanced product.

Frontiers in Photoelectrochemical Catalysis: A Focus on Valuable Product Synthesis

Photoelectrochemical (PEC) catalysis provides the most promising avenue for producing value-added chemicals and consumables from renewable precursors. Over the last decades, PEC catalysis, including reduction of renewable feedstock, oxidation of organics, and activation and functionalization of C─C and C─H bonds, are extensively investigated, opening new opportunities for employing the technology in upgrading readily available resources. However, several challenges still remain unsolved, hindering the commercialization of the process. This review offers an overview of PEC catalysis targeted at the synthesis of high-value chemicals from sustainable precursors. First, the fundamentals of evaluating PEC reactions in the context of value-added product synthesis at both anode and cathode are recalled. Then, the common photoelectrode fabrication methods that have been employed to produce thin-film photoelectrodes are highlighted. Next, the advancements are systematically reviewed and discussed in the PEC conversion of various feedstocks to produce highly valued chemicals. Finally, the challenges and prospects in the field are presented. This review aims at facilitating further development of PEC technology for upgrading several renewable precursors to value-added products and other pharmaceuticals.

Engineering NH2-Cu-NH2 Triple-atom Sites in Defective MOFs for Selective Overall Photoreduction of CO2 into CH3COCH3

Selective photoreduction of CO2 to multicarbon products, is an important but challenging task, due to high CO2 activation barriers and insufficient catalytic sites for C-C coupling. Herein, a defect engineering strategy for incorporating copper sites into the connected nodes of defective metal-organic framework UiO-66-NH2 for selective overall photo-reduction of CO2 into acetone. The Cu2+ site in well-modified CuN2O2 units served as a trapping site to capture electrons via efficient electron-hole separation, forming the active Cu+ site for CO2 reduction. Two NH2 groups in CuN2O2 unit adsorb CO2 and cooperated with copper ion to functionalize as a triple atom catalytic site, each interacting with one CO2 molecule to strengthen the binding of *CO intermediate to the catalytic site. The deoxygenated *CO attached to the Cu site interacted with *CH3 fixed at one amino group to form the key intermediate CO*-CH3, which interacted with the third reduction intermediate on another amino group to produce acetone. Our photocatalyst realizes efficient overall CO2 reduction to C3 product acetone CH3COCH3 with an evolution rate of 70.9 μmol gcat -1 h-1 and a selectivity up to 97 % without any adducts, offering a promising avenue for designing triple-atomic sites to producing C3 product from photosynthesis with water.

Nanoconfinement Enables Photoelectrochemical Selective Oxidation of Glycerol via the Microscale Fluid Effect

The glycerol oxidation reaction (GOR) run with photoelectrochemical cells (PECs) is one of the most promising ways to upgrade biomass because it is thermodynamically favorable, while irreversible overoxidation leads to unsatisfactory product selectivities. Herein, a tunable one-dimensional nanoconfined environment was introduced into the GOR process, which accelerated mass transfer of glycerol via the microscale fluid effect and changed the main oxidation product from formic acid (FA) to glyceraldehyde (GLD), which led to retention of the heavier multicarbon products. The rate of glycerol diffusion in the nanochannels increased by a factor of 4.92 with decreasing inner diameters. The main product from the PEC-selective oxidation of glycerol changed from the C1 product FA to the C3 product GLD with a great selectivity of 60.7%. This work provides a favorable approach for inhibiting further oxidation of multicarbon products and illustrates the importance of microenvironmental regulation in biomass oxidation.

Selective Photoelectrochemical Oxidation of Glycerol to Glyceric Acid on (002) Facets Exposed WO3 Nanosheets

Glycerol is a byproduct of biodiesel production. Selective photoelectrochemical oxidation of glycerol to high value-added chemicals offers an economical and sustainable approach to transform renewable feedstock as well as store green energy at the same time. In this work, we synthesized monoclinic WO3 nanosheets with exposed (002) facets, which could selectively oxidize glycerol to glyceric acid (GLYA) with a photocurrent density of 1.7 mA cm-2 , a 73 % GLYA selectivity and a 39 % GLYA Faradaic efficiency at 0.9 V vs. reversible hydrogen electrode (RHE) under AM 1.5G illumination (100 mW cm-2 ). Compared to (200) facets exposed WO3 , a combination of experiments and theoretical calculations indicates that the superior performance of selective glycerol oxidation mainly originates from the better charge separation and prolonged carrier lifetime resulted from the plenty of surface trapping states, lower energy barrier of the glycerol-to-GLYA reaction pathway, more abundant active sites and stronger oxidative ability of photogenerated holes on the (002) facets exposed WO3 . Our findings show great potential to significantly contribute to the sustainable and environmentally friendly chemical processes via designing high performance photoelectrochemical cell via facet engineering for renewable feedstock transformation.

Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Insight into interface electronic structure of ZnIn2S4/TiO2 heterostructure for enhanced photoelectrochemical glycerol oxidation

Developing a high-efficiency photoelectrochemical (PEC) electrode for the glycerol oxidation reaction (GOR) is important for producing valuable products. The PEC performance could be enhanced by rationally designing heterostructures with inhibited recombination of charge carriers. Nevertheless, the interface electronic structure of heterostructures has not been comprehensively analyzed. In this work, the PEC GOR performance of ZnIn2S4/TiO2 heterostructure photoanode showed 1.7 folds enhancement than that of pure TiO2 photoanode at 1.23 V vs. RHE. The ZnIn2S4/TiO2 heterostructure was simulated by constructing ZnIn2S4 on the TiO2 single crystal, which was beneficial for investigating the interface electronic structure of heterostructure. Single-particle spectroscopy demonstrated a significantly increased lifetime of charge carriers. Combined with the in-situ X-ray photoelectron spectroscopy, Kelvin probe force microscopy, work function, and electron paramagnetic resonance, the interface electronic structure of the ZnIn2S4/TiO2 heterostructure was proposed with a Z-scheme mechanism. This work provides a comprehensive strategy for analyzing the interface electronic structure of heterostructures.

Covalent organic frameworks bearing Ni active sites for free radical-mediated photoelectrochemical organic transformations

Photoelectrochemical (PEC) organic transformations occurring at anodes are a promising strategy for circumventing the sluggish kinetics of the oxygen evolution reaction. Here, we report a free radical-mediated reaction instead of direct hole transfer occurring at the solid/liquid interface for PEC oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) with high selectivity. A bismuth vanadate (BiVO4) photoanode coated with a 2,2'-bipyridine-based covalent organic framework bearing single Ni sites (Ni-TpBpy) was developed to drive the transformation. Experimental studies reveal that the reaction at the Ni-TpBpy/BiVO4 photoanode followed first-order reaction kinetics, boosting the formation of surface-bound ·OH radicals, which suppressed further BAD oxidation and provided a nearly 100% selectivity and a rate of 80.63 μmol hour-1 for the BA-to-BAD conversion. Because alcohol-to-aldehyde conversions are involved in the valorizations of biomass and plastics, this work is expected to open distinct avenues for producing key intermediates of great value.

Surface Engineering of Cu2O Photocathodes via Facile Graphene Oxide Decoration for Improved Photoelectrochemical Water Splitting

Copper oxide (Cu2O) has attracted significant interest as an efficient photocathode for photoelectrochemical (PEC) water splitting owing to its abundance, suitable band gap, and band-edge potential. Nevertheless, a high charge recombination rate restricts its practical photoconversion efficiency and reduces the PEC water-splitting performance. To address this challenge, we present the facile electrodeposition of graphene oxide (GO) on the Cu2O photocathode surface. To determine the effect of varying GO weight percentages on PEC performance, varying amounts of GO were deposited on the Cu2O photocathode surface. The optimally deposited GO-Cu2O photocathode exhibited a photocurrent density of -0.39 to -1.20 mA/cm2, which was three times that of a photocathode composed of pristine Cu2O. The surface decoration of Cu2O with GO reduced charge recombination and improved the PEC water-splitting performance. These composites can be utilized in strategies designed to address the challenges associated with low-efficiency Cu2O photocathodes. The physicochemical properties of the prepared samples were comprehensively characterized by field-emission scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, Raman spectroscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy. We believe that this research will pave the way for developing efficient Cu2O-based photocathodes for PEC water splitting.

Surface Oxygen Species in Metal Oxide Photoanodes for Solar Energy Conversion

Converting and storing solar energy directly as chemical energy through photoelectrochemical devices are promising strategies to replace fossil fuels. Metal oxides are commonly used as photoanode materials, but they still encounter challenges such as limited light absorption, inefficient charge separation, sluggish surface reactions, and insufficient stability. The regulation of surface oxygen species on metal oxide photoanodes has emerged as a critical strategy to modulate molecular and charge dynamics at the reaction interface. However, the precise role of surface oxygen species in metal oxide photoanodes remains ambiguous. The review focuses on elucidating the formation and regulation mechanisms of various surface oxygen species in metal oxides, their advantages and disadvantages in photoelectrochemical reactions, and the characterization methods employed to investigate them. Additionally, the article discusses emerging opportunities and potential hurdles in the regulation of surface oxygen species. By shedding light on the significance of surface oxygen species, this review aims to advance our understanding of their impact on metal oxide photoanodes, paving the way for the design of more efficient and stable photoelectrochemical devices.

Photoelectrochemical Selective Oxidation of Glycerol to Glyceraldehyde with Bi-Based Metal-Organic-Framework-Decorated WO3 Photoanode

The conversion of glycerol to high-value-added products via photoelectrochemical (PEC) oxidation has emerged as a promising approach for utilizing a sustainable and clean energy source with environmental and economic benefits. Moreover, the energy requirement for glycerol to produce hydrogen is lower than that for pure water splitting. In this study, we propose the use of WO₃ nanostructures decorated with Bi-based metal-organic frameworks (Bi-MOFs) as the photoanode for glycerol oxidation with simultaneous hydrogen production. The WO₃-based electrodes selectively converted glycerol to glyceraldehyde, a high-value-added product, with remarkable selectivity. The Bi-MOF-decorated WO₃ nanorods enhanced the surface charge transfer and adsorption properties, thereby improving the photocurrent density and production rate (1.53 mA/cm² and 257 mmol/m²·h at 0.8 V_RHE). The photocurrent was maintained for 10 h, ensuring stable glycerol conversion. Furthermore, at 1.2 V_RHE, the average production rate of glyceraldehyde reached 420 mmol/m²·h, with a selectivity of 93.6% between beneficial oxidized products over the photoelectrode. This study provides a practical approach for the conversion of glycerol to glyceraldehyde via the selective oxidation of WO₃ nanostructures and demonstrates the potential of Bi-MOFs as a promising cocatalyst for PEC biomass valorization.

Photoelectrochemical Epoxidation of Cyclohexene on an α-Fe2O3 Photoanode Using Water as the Oxygen Source

This study developed a safe and sustainable route for the epoxidation of cyclohexene using water as the source of oxygen at room temperature and ambient pressure. Here, we optimized the cyclohexene concentration, volume of solvent/water (CH₃CN, H₂O), time, and potential on the photoelectrochemical (PEC) cyclohexene oxidation reaction of the α-Fe₂O₃ photoanode. The α-Fe₂O₃ photoanode epoxidized cyclohexene to cyclohexene oxide with a 72.4 ± 3.6% yield and a 35.2 ± 1.6% Faradaic efficiency of 0.37 V vs Fc/Fc⁺ (0.8 V_Ag/AgCl) under 100 mW cm^-2. Furthermore, the irradiation of light (PEC) decreased the applied voltage of the electrochemical cell oxidation process by 0.47 V. This work supplies an energy-saving and environment-benign approach for producing value-added chemicals coupled with solar fuel generation. Epoxidation with green solvents via PEC methods has a high potential for different oxidation reactions of value-added and fine chemicals.

Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO4 Photoanode

The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO₄ photoanode, while the PEC performance of most BiVO₄ photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO₄ photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO₄ photoanode results in a photocurrent density of 6.04 mA cm^-2 and a DHA production rate of 325.2 mmol m^-2 h^-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO₄ to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.

Selective Valorization of Glycerol to Formic Acid on a BiVO4 Photoanode through NiFe Phenolic Networks

The integration of the glycerol oxidation reaction (GOR) with the hydrogen evolution reaction in photoelectrochemical (PEC) cells is a desirable alternative to PEC water splitting since a large quantity of glycerol is easily accessible as the byproduct from the biodiesel industry. However, the PEC valorization of glycerol to the value-added products suffers from low Faradaic efficiency and selectivity, especially in acidic conditions, which is beneficial for hydrogen production. Herein, by loading bismuth vanadate (BVO) with a robust catalyst composed of phenolic ligands (tannic acid) coordinated with Ni and Fe ions (TANF), we demonstrate a modified BVO/TANF photoanode for the GOR with a remarkable Faradaic efficiency of over 94% to value-added molecules in a 0.1 M Na₂SO₄/H₂SO₄ (pH = 2) electrolyte. The BVO/TANF photoanode achieved a high photocurrent of 5.26 mA·cm^-2 at 1.23 V versus reversible hydrogen electrode under 100 mW/cm² white light irradiation for formic acid production with 85% selectivity, equivalent to 573 mmol/(m²·h). Transient photocurrent and transient photovoltage techniques and electrochemical impedance spectroscopy along with intensity-modulated photocurrent spectroscopy indicated that the TANF catalyst could accelerate hole transfer kinetics and suppress charge recombination. Comprehensive mechanistic investigations reveal that the GOR is initiated by the photogenerated holes of BVO, while the high selectivity to formic acid is attributed to the selective adsorption of primary hydroxyl groups in glycerol on TANF. This study provides a promising avenue for highly efficient and selective formic acid generation from biomass in acid media via PEC cells.

Efficient 1,3-dihydroxyacetone biosynthesis in Gluconobacter oxydans using metabolic engineering and a fed-batch strategy

1,3-Dihydroxyacetone (DHA) is a commercially important chemical and widely used in cosmetics, pharmaceuticals, and food industries as it prevents excessive water evaporation, and provides anti-ultraviolet radiation protection and antioxidant activity. Currently, the industrial production of DHA is based on a biotechnological synthetic route using Gluconobacter oxydans. However, achieving higher production requires more improvements in the synthetic process. In this study, we compared DHA synthesis levels in five industrial wild-type Gluconobacter strains, after which the G. oxydans WSH-003 strain was selected. Then, 16 dehydrogenase genes, unrelated to DHA synthesis, were individually knocked out, with one strain significantly enhancing DHA production, reaching 89.49 g L-1 and 42.27% higher than the wild-type strain. By optimizing the culture media, including seed culture and fermentation media, DHA production was further enhanced. Finally, using an established fed-batch fermentation system, DHA production reached 198.81 g L-1 in a 5 L bioreactor, with a glycerol conversion rate of 82.84%.

Nanoetching TiO2 nanorod photoanodes to induce high-energy facet exposure for enhanced photoelectrochemical performance

Crystal facet engineering is considered as an effective way to improve photoelectrochemical (PEC) performance. Here, we have developed a nanoetching technology (TiO₂ → TiO₂/Bi₄Ti₃O₁₂ → TiO₂/BiVO₄ → etching-TiO₂) to treat rutile TiO₂ nanorod films. Interestingly, the technology can induce the exposure of a large number of high energy (101) faces, and the etching-TiO₂ film (E-TiO₂) showed a significantly enhanced PEC performance. A dynamic study indicates that charge separation and transfer have been obviously improved by such a nanoetching technology. In particular, the charge transfer efficiency (η_trans) of E-TiO₂ reaches 93.4% at 1.23 V vs. RHE without any loaded cocatalyst. The mechanism of PEC performance enhanced by the strategy is experimentally and theoretically unraveled. The improvement of PEC performance is mainly attributed to the shorter distance between H and the neighboring O-b for the HO* intermediates of the rutile (101) facet, which can reduce the energy barrier for the OER. Besides, the driving force for spatial charge separation between the (110) and (101) facets can promote charge separation. This work offers a new and versatile nanotechnology to induce the exposure of the high energy crystal facets and improve the PEC performance.