Reaction Network of Methanol Synthesis over Cu/ZnO Nanocatalysts

The Enigma of Methanol Synthesis by Cu/ZnO/Al2O3-Based Catalysts

The activity and durability of the Cu/ZnO/Al2O3 (CZA) catalyst formulation for methanol synthesis from CO/CO2/H2 feeds far exceed the sum of its individual components. As such, this ternary catalytic system is a prime example of synergy in catalysis, one that has been employed for the large scale commercial production of methanol since its inception in the mid 1960s with precious little alteration to its original formulation. Methanol is a key building block of the chemical industry. It is also an attractive energy storage molecule, which can also be produced from CO2 and H2 alone, making efficient use of sequestered CO2. As such, this somewhat unusual catalyst formulation has an enormous role to play in the modern chemical industry and the world of global economics, to which the correspondingly voluminous and ongoing research, which began in the 1920s, attests. Yet, despite this commercial success, and while research aimed at understanding how this formulation functions has continued throughout the decades, a comprehensive and universally agreed upon understanding of how this material achieves what it does has yet to be realized. After nigh on a century of research into CZA catalysts, the purpose of this Review is to appraise what has been achieved to date, and to show how, and how far, the field has evolved. To do so, this Review evaluates the research regarding this catalyst formulation in a chronological order and critically assesses the validity and novelty of various hypotheses and claims that have been made over the years. Ultimately, the Review attempts to derive a holistic summary of what the current body of literature tells us about the fundamental sources of the synergies at work within the CZA catalyst and, from this, suggest ways in which the field may yet be further advanced.

Entrapped Molecule-Like Europium-Oxide Clusters in Zinc Oxide with Nearly Unaffected Host Structure

Nanocrystalline ZnO sponges doped with 5 mol% EuO_1.5 are obtained by heating metal-salt complex based precursor pastes at 200-900 °C for 3 min. X-ray diffraction, transmission electron microscopy, and extended X-ray absorption fine structure (EXAFS) show that phase separation into ZnO:Eu and c-Eu₂ O₃ takes place upon heating at 700 °C or higher. The unit cell of the clean oxide made at 600 °C shows only ≈0.4% volume increase versus undoped ZnO, and EXAFS shows a ZnO local structure that is little affected by the Eu-doping and an average Eu³⁺ ion coordination number of ≈5.2. Comparisons of 23 density functional theory-generated structures having differently sized Eu-oxide clusters embedded in ZnO identify three structures with four or eight Eu atoms as the most energetically favorable. These clusters exhibit the smallest volume increase compared to undoped ZnO and Eu coordination numbers of 5.2-5.5, all in excellent agreement with experimental data. ZnO defect states are crucial for efficient Eu³⁺ excitation, while c-Eu₂ O₃ phase separation results in loss of the characteristic Eu³⁺ photoluminescence. The formation of molecule-like Eu-oxide clusters, entrapped in ZnO, proposed here, may help in understanding the nature of the unexpected high doping levels of lanthanide ions in ZnO that occur virtually without significant change in ZnO unit cell dimensions.

Methanol Synthesis from CO2/CO Mixture on Cu-Zn Catalysts from Microkinetics-Guided Machine Learning Pathway Search

Methanol synthesis on industrial Cu/ZnO/Al₂O₃ catalysts via the hydrogenation of CO and CO₂ mixture, despite several decades of research, is still puzzling due to the nature of the active site and the role of CO₂ in the feed gas. Herein, with the large-scale machine learning atomic simulation, we develop a microkinetics-guided machine learning pathway search to explore thousands of reaction pathways for CO₂ and CO hydrogenations on thermodynamically favorable Cu-Zn surface structures, including Cu(111), Cu(211), and Zn-alloyed Cu(211) surfaces, from which the lowest energy pathways are identified. We find that Zn decorates at the step-edge at Cu(211) up to 0.22 ML under reaction conditions with the Zn-Zn dimeric sites being avoided. CO₂ and CO hydrogenations occur exclusively at the step-edge of the (211) surface with up to 0.11 ML Zn coverage, where the low coverage of Zn (0.11 ML) does not much affect the reaction kinetics, but the higher coverages of Zn (0.22 ML) poison the catalyst. It is CO₂ hydrogenation instead of CO hydrogenation that dominates methanol synthesis, agreeing with previous isotope experiments. While metallic steps are identified as the major active site, we show that the [-Zn-OH-Zn-] chains (cationic Zn) can grow on Cu(111) surfaces under reaction conditions, which suggests the critical role of CO in the mixed gas for reducing the cationic Zn and exposing metal sites for methanol synthesis. Our results provide a comprehensive picture on the dynamic coupling of the feed gas composition, the catalyst active site, and the reaction activity in this complex heterogeneous catalytic system.

Dependence of copper particle size and interface on methanol and CO formation in CO2 hydrogenation over Cu@ZnO catalysts

The copper particle size and the interface of Cu and ZnO showed strong impacts on the formation of methanol and CO in CO2 hydrogenation over Cu@ZnO catalysts.

Amin M, Kaneti Y, Suendo V. Role of Urea on Structural, Textural, and Optical Properties of Macroemulsion-assisted Synthesized Holey ZnO Nanosheets for Photocatalytic Applications

Using a macroemulsion-assisted solvothermal method, the present study produces holey ZnO nanosheets exhibiting the hexagonal wurtzite crystal structure. In the synthetic process, urea is employed as a hydrolyzing agent. Its...

The active sites of Cu-ZnO catalysts for water gas shift and CO hydrogenation reactions

Cu–ZnO–Al₂O₃ catalysts are used as the industrial catalysts for water gas shift (WGS) and CO hydrogenation to methanol reactions. Herein, via a comprehensive experimental and theoretical calculation study of a series of ZnO/Cu nanocrystals inverse catalysts with well-defined Cu structures, we report that the ZnO–Cu catalysts undergo Cu structure-dependent and reaction-sensitive in situ restructuring during WGS and CO hydrogenation reactions under typical reaction conditions, forming the active sites of Cu_Cu(100)-hydroxylated ZnO ensemble and Cu_Cu(611)Zn alloy, respectively. These results provide insights into the active sites of Cu–ZnO catalysts for the WGS and CO hydrogenation reactions and reveal the Cu structural effects, and offer the feasible guideline for optimizing the structures of Cu–ZnO–Al₂O₃ catalysts.

Identification of active sites of a catalyst is the Holy Grail in heterogeneous catalysis. Here, the authors successfully identify the Cu_Cu(100)- hydroxylated ZnO ensemble and Cu_Cu(611)Zn alloy as the active sites of Cu-ZnO catalysts for water gas shift and CO hydrogenation reactions, respectively.

Synthesis of Ni2P/CdS and Pt/TiO2 nanocomposite for photoreduction of CO2 into methanol

It is a great challenge to convert thermochemically stable CO₂ into value-added products such as CH₄, CH₃OH, CO via utilizing solar energy. It is also a difficult task to develop an efficient catalyst for the reduction of CO₂. We have designed and synthesized noble metal-free photocatalytic nanostructure Ni₂P/CdS and Pt/TiO₂ for conversion of CO₂ to methanol in the presence of sacrificial donor triethylamine (TEA) and hydrogen peroxide. The synthesised catalysts physicochemical properties were studied by using several spectroscopic techniques like; XRD, UV-DRS, XPS, TEM, SEM and PL. Quantification of methanol by GC–MS showed encouraging results of 1424.8 and 2843 μmol g⁻¹ of catalyst for Pt/TiO₂ and 5 wt% Ni₂P/CdS composites, respectively. Thus, Ni₂P/CdS is a promising catalyst with higher productivity and significant selectivity than in-vogue catalysts.

The Early Steps of Molecule-to-Material Conversion in Chemical Vapor Deposition (CVD): A Case Study

Transition metal complexes with β-diketonate and diamine ligands are valuable precursors for chemical vapor deposition (CVD) of metal oxide nanomaterials, but the metal-ligand bond dissociation mechanism on the growth surface is not yet clarified in detail. We address this question by density functional theory (DFT) and ab initio molecular dynamics (AIMD) in combination with the Blue Moon (BM) statistical sampling approach. AIMD simulations of the Zn β-diketonate-diamine complex Zn(hfa)₂TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N′,N′-tetramethylethylenediamine), an amenable precursor for the CVD of ZnO nanosystems, show that rolling diffusion of this precursor at 500 K on a hydroxylated silica slab leads to an octahedral-to-square pyramidal rearrangement of its molecular geometry. The free energy profile of the octahedral-to-square pyramidal conversion indicates that the process barrier (5.8 kcal/mol) is of the order of magnitude of the thermal energy at the operating temperature. The formation of hydrogen bonds with surface hydroxyl groups plays a key role in aiding the dissociation of a Zn-O bond. In the square-pyramidal complex, the Zn center has a free coordination position, which might promote the interaction with incoming reagents on the deposition surface. These results provide a valuable atomistic insight on the molecule-to-material conversion process which, in perspective, might help to tailor by design the first nucleation stages of the target ZnO-based nanostructures.

Neural Network Sampling of the Free Energy Landscape for Nitrogen Dissociation on Ruthenium

In heterogeneous catalysis, free energy profiles of reactions govern the mechanisms, rates, and equilibria. Energetics are conventionally computed using the harmonic approximation (HA), which requires determination of critical states a priori. Here, we use neural networks to efficiently sample and directly calculate the free energy surface (FES) of a prototypical heterogeneous catalysis reaction-the dissociation of molecular nitrogen on ruthenium-at density-functional-theory-level accuracy. We find that the vibrational entropy of surface atoms, often neglected in HA for transition metal catalysts, contributes significantly to the reaction barrier. The minimum free energy path for dissociation reveals an "on-top" adsorbed molecular state prior to the transition state. While a previously reported flat-lying molecular metastable state can be identified in the potential energy surface, it is absent in the FES at relevant reaction temperatures. These findings demonstrate the importance of identifying critical points self-consistently on the FES for reactions that involve considerable entropic effects.

Size-dependent strong metal–support interaction in Pd/ZnO catalysts for hydrogenation of CO2 to methanol

Size-dependent strong metal–support interactions govern both the activity and selectivity decisively.

Chemical Batteries with CO2

Efforts to obtain raw materials from CO₂ by catalytic reduction as a means of combating greenhouse gas emissions are pushing the boundaries of the chemical industry. The dimensions of modern energy regimes, on the one hand, and the necessary transport and trade of globally produced renewable energy, on the other, will require the use of chemical batteries in conjunction with the local production of renewable electricity. The synthesis of methanol is an important option for chemical batteries and will, for that reason, be described here in detail. It is also shown that the necessary, robust, and fundamental understanding of processes and the material science of catalysts for the hydrogenation of CO₂ does not yet exist.

A DFT study for CO2 hydrogenation on W(111) and Ni-doped W(111) surfaces

The first-step hydrogenation of CO2 to methanol via a HCOO route, COOH route, and RWGS + CO-hydro route on NixW(111) (x = 0, 1, 3) has been studied using density functional theory (DFT) calculations. CO2 and H could be chemically adsorbed on Ni-doped W(111) surfaces with relatively high adsorption energy, due to the synergistic effect of W that helps anchoring CO2 and Ni that facilitates the adsorption of H. The HCOO route is the main path for the first-step hydrogenation of CO2 with lower barriers on all three surfaces. Besides, competition between the HCOO route and RWGS + CO-hydro route could be enhanced with the increase in doped Ni on the W(111) surface. Furthermore, the first-step hydrogenation of CO2 hardly undergoes the COOH pathway because of the higher barriers, although the doping of Ni has slightly reduced the barrier of COOH formation. Our calculated results indicate that the W(111) and Ni-doped W(111) surface are potential candidate surfaces for CO2 hydrogenation to methanol, and Ni doping could influence the selectivity of reduction pathways.

The pathways of the CO2 hydrogenation by NiCu/ZnO from DFT molecular dynamics simulations

Metal nanoparticles supported on semiconductor surfaces have been proposed as promising nanocatalyst candidates of CO₂ conversion to energy carrier molecules such as formic acid or carbon monoxide, which can be used as a feedstock for fuels synthesis. This study is focused on the bimetallic Cu/Ni nanoparticles supported on the ZnO. The respective reaction mechanisms have been studied by means of the Molecular Dynamics with the DFT methodology. The results suggest that on CuNi/ZnO CO₂ hydrogenation to formate pathway is more favorable than carboxyl route. These pathways are competitive with the CO₂ reduction to CO.

Fast, Low-Cost Synthesis of ZnO:Eu Nanosponges and the Nature of Ln Doping in ZnO

A low-cost template-free solution chemical route to highly porous nanocrystalline sponges of ZnO-EuO_1.5 with 0-5 mol % Eu is presented. The process uses Zn- and Eu-acetate-nitrate and triethanolamine as precursors in methanol. After evaporation of the solvent and heating at 200 °C for 3 min, crystalline ZnO:Eu sponges with minor amounts of organic residues were obtained. Heating to 400 °C replaced the organics with carbonate, which in its turn was decomposed at temperatures below 600 °C, forming ZnO:Eu sponges. Samples heated to 200-1000 °C for 3 min were studied with XRD, SEM, TEM, TG, XPS, and IR spectroscopy. The ZnO:Eu crystallite sizes could be tuned from below 10 nm for sponges prepared at 200-500 °C, to over 100 nm range at 900 °C, without sintering of the overall microstructure. XRD showed the presence of hexagonal ZnO:Eu (or at 700-1000 °C, ZnO:Eu and cubic Eu₂O₃) as the only phases present. The ZnO:Eu had slightly larger unit cell dimensions than the literature value of ZnO for samples obtained at 200-600 °C, while the unit cells of samples obtained at higher temperatures were quite close to the value of undoped ZnO. XPS showed that Eu was mainly in its 3+ state and well-distributed within the sponges but segregated at the ZnO sponge surface upon heating at 700-1000 °C, in accordance with XRD studies showing Eu₂O₃ formation.

The unique interplay between copper and zinc during catalytic carbon dioxide hydrogenation to methanol

In spite of numerous works in the field of chemical valorization of carbon dioxide into methanol, the nature of high activity of Cu/ZnO catalysts, including the reaction mechanism and the structure of the catalyst active site, remains the subject of intensive debate. By using high-pressure operando techniques: steady-state isotope transient kinetic analysis coupled with infrared spectroscopy, together with time-resolved X-ray absorption spectroscopy and X-ray powder diffraction, and supported by electron microscopy and theoretical modeling, we present direct evidence that zinc formate is the principal observable reactive intermediate, which in the presence of hydrogen converts into methanol. Our results indicate that the copper–zinc alloy undergoes oxidation under reaction conditions into zinc formate, zinc oxide and metallic copper. The intimate contact between zinc and copper phases facilitates zinc formate formation and its hydrogenation by hydrogen to methanol.

In spite of numerous works, the nature of high activity of Cu/ZnO catalyst in methanol synthesis remains the subject of intensive debate. Here, the authors study the carbon dioxide hydrogenation mechanism using high-pressure operando techniques which allow them to unify different, seemingly contradicting, models.

The Study of Reverse Water Gas Shift Reaction Activity over Different Interfaces: The Design of Cu-Plate ZnO Model Catalysts

CO2 hydrogenation to methanol is one of the main and valuable catalytic reactions applied on Cu/ZnO-based catalysts; the interface formed through Zn migration from ZnO support to the surface of Cu nanoparticle (ZnOx-Cu NP-ZnO) has been reported to account for methanol synthesis from CO2 hydrogenation. However, the accompanied reverse water gas shift (RWGS) reaction significantly decreases methanol selectivity and deactivates catalysts soon. Inhibition of RWGS is thus of great importance to afford high yield of methanol. The clear understanding of the reactivity of RWGS reaction on both the direct contact Cu-ZnO interface and ZnOx-Cu NP-ZnO interface is essential to reveal the low methanol selectivity in CO2 hydrogenation to methanol and look for efficient catalysts for RWGS reaction. Cu doped plate ZnO (ZnO:XCu) model catalysts were prepared through a hydrothermal method to simulate direct contact Cu-ZnO interface and plate ZnO supported 1 wt % Cu (1Cu/ZnO) catalyst was prepared by wet impregnation for comparison in RWGS reaction. Electron paramagnetic resonance (EPR), XRD, SEM, Raman, hydrogen temperature-programmed reduction (H2-TPR) and CO2 temperature-programmed desorption (CO2-TPD) were employed to characterize these catalysts. The characterization results confirmed that Cu incorporated into ZnO lattice and finally formed direct contact Cu-ZnO interface after H2 reduction. The catalytic performance revealed that direct contact Cu-ZnO interface displays inferior RWGS reaction reactivity at reaction temperature lower than 500 °C, compared with the ZnOx-Cu NP-ZnO interface; however, it is more stable at reaction temperature higher than 500 °C, enables ZnO:XCu model catalysts superior catalytic activity to that of 1Cu/ZnO. This finding will facilitate the designing of robust and efficient catalysts for both CO2 hydrogenation to methanol and RWGS reactions.

State of the art and perspectives in heterogeneous catalysis of CO2 hydrogenation to methanol

The ever-increasing amount of anthropogenic carbon dioxide (CO₂) emissions has resulted in great environmental impacts, the heterogeneous catalysis of CO₂ hydrogenation to methanol is of great significance.

CO2 hydrogenation to high-value products via heterogeneous catalysis

Recently, carbon dioxide capture and conversion, along with hydrogen from renewable resources, provide an alternative approach to synthesis of useful fuels and chemicals. People are increasingly interested in developing innovative carbon dioxide hydrogenation catalysts, and the pace of progress in this area is accelerating. Accordingly, this perspective presents current state of the art and outlook in synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols through two leading hydrogenation mechanisms: methanol reaction and Fischer-Tropsch based carbon dioxide hydrogenation. The future research directions for developing new heterogeneous catalysts with transformational technologies, including 3D printing and artificial intelligence, are provided.

Carbon dioxide (CO₂) capture and conversion provide an alternative approach to synthesis of useful fuels and chemicals. Here, Ye et al. give a comprehensive perspective on the current state of the art and outlook of CO₂ catalytic hydrogenation to the synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols.

The Case of Formic Acid on Anatase TiO2 (101): Where is the Acid Proton?

Carboxylic-acid adsorption on anatase TiO₂ is a relevant process in many technological applications. Yet, despite several decades of investigations, the acid-proton localization-either on the molecule or on the surface-is still an open issue. By modeling the adsorption of formic acid on top of anatase(101) surfaces, we highlight the formation of a short strong hydrogen bond. In the 0 K limit, the acid-proton behavior is ruled by quantum delocalization effects in a single potential well, while at ambient conditions, the proton undergoes a rapid classical shuttling in a shallow two-well free-energy profile. This picture, supported by agreement with available experiments, shows that the anatase surface acts like a protecting group for the carboxylic acid functionality. Such a new conceptual insight might help rationalize chemical processes involving carboxylic acids on oxide surfaces.

Towards operando computational modeling in heterogeneous catalysis

An increased synergy between experimental and theoretical investigations in heterogeneous catalysis has become apparent during the last decade. Experimental work has extended from ultra-high vacuum and low temperature towards operando conditions. These developments have motivated the computational community to move from standard descriptive computational models, based on inspection of the potential energy surface at 0 K and low reactant concentrations (0 K/UHV model), to more realistic conditions. The transition from 0 K/UHV to operando models has been backed by significant developments in computer hardware and software over the past few decades. New methodological developments, designed to overcome part of the gap between 0 K/UHV and operando conditions, include (i) global optimization techniques, (ii) ab initio constrained thermodynamics, (iii) biased molecular dynamics, (iv) microkinetic models of reaction networks and (v) machine learning approaches. The importance of the transition is highlighted by discussing how the molecular level picture of catalytic sites and the associated reaction mechanisms changes when the chemical environment, pressure and temperature effects are correctly accounted for in molecular simulations. It is the purpose of this review to discuss each method on an equal footing, and to draw connections between methods, particularly where they may be applied in combination.

Carbon Dioxide Hydrogenation by Means of Plasmonic Resonance Activation in Silica Aerogel Media

Surface Plasmon Resonance can be used to activate zinc oxide/copper catalysts in order to perform the carbon dioxide hydrogenation reaction by means of light energy, avoiding high-temperature processes. The synthesis and impregnation methods have been designed to fill glass microreactors with ZnO/Cu nanoparticles supported on transparent silica aerogels to maximize the light absorbed by the catalyst. A LED device surrounding the glass microreactors provided white light to activate the catalyst homogeneously throughout the reactor. Temperature, pressure, amount of catalyst and gases flow were studied as possible variables to enhance the process trying to maximize CO₂ conversion rates, achieving the best results working at high pressures. The use of transparent SiO₂ Aerogels as supports for photocatalytic gas phase reactions even under high-pressure conditions is demonstrated.

Molecular Modelling for Reactor Design

Chemical reactor modelling based on insights and data on a molecular level has become reality over the last few years. Multiscale models describing elementary reaction steps and full microkinetic schemes, pore structures, multicomponent adsorption and diffusion inside pores, and entire reactors have been presented. Quantum mechanical (QM) approaches, molecular simulations (Monte Carlo and molecular dynamics), and continuum equations have been employed for this purpose. Some recent developments in these approaches are presented, in particular time-dependent QM methods, calculation of van der Waals forces, new approaches for force field generation, automatic setup of reaction schemes, and pore modelling. Multiscale simulations are discussed. Applications of these approaches to heterogeneous catalysis are demonstrated for examples that have found growing interest over the last few years, such as metal-support interactions, influence of pore geometry on reactions, noncovalent bonding, reaction dynamics, dynamic changes in catalyst nanoparticle structure, electrocatalysis, solvent effects in catalysis, and multiscale modelling.

Steric Hindrance in Sulfur Vacancy of Monolayer MoS2 Boosts Electrochemical Reduction of Carbon Monoxide to Methane

The efficient generation of methane by total electroreduction of carbon monoxide (CO) could be of benefit for a more sustainable society. However, a highly efficient and selective catalyst for this process remains to be developed. In this study, density functional theory calculations indicate that steric hindrance in monolayer molybdenum sulfide with 2 S vacancies (DV-MoS₂ ) can facilitate the conversion of CO into CH₄ with high activity and selectivity under electrochemical reduction at a low potential of -0.53 V vs. RHE and ambient conditions. The potential is a significant improvement on the state-of-the-art Cu electrode (-0.74 V vs. RHE), with less electrical energy. Moreover, the results suggest that such steric hindrance effects are important for structure-sensitive catalytic reactions.

Status and prospects in higher alcohols synthesis from syngas

Higher alcohols are important compounds with widespread applications in the chemical, pharmaceutical and energy sectors. Currently, they are mainly produced by sugar fermentation (ethanol and isobutanol) or hydration of petroleum-derived alkenes (heavier alcohols), but their direct synthesis from syngas (CO + H₂) would comprise a more environmentally-friendly, versatile and economical alternative. Research efforts in this reaction, initiated in the 1930s, have fluctuated along with the oil price and have considerably increased in the last decade due to the interest to exploit shale gas and renewable resources to obtain the gaseous feedstock. Nevertheless, no catalytic system reported to date has performed sufficiently well to justify an industrial implementation. Since the design of an efficient catalyst would strongly benefit from the establishment of synthesis-structure-function relationships and a deeper understanding of the reaction mechanism, this review comprehensively overviews syngas-based higher alcohols synthesis in three main sections, highlighting the advances recently made and the challenges that remain open and stimulate upcoming research activities. The first part critically summarises the formulations and methods applied in the preparation of the four main classes of materials, i.e., Rh-based, Mo-based, modified Fischer-Tropsch and modified methanol synthesis catalysts. The second overviews the molecular-level insights derived from microkinetic and theoretical studies, drawing links to the mechanisms of Fischer-Tropsch and methanol syntheses. Finally, concepts proposed to improve the efficiency of reactors and separation units as well as to utilise CO₂ and recycle side-products in the process are described in the third section.

Surface phase diagram prediction from a minimal number of DFT calculations: redox-active adsorbates on zinc oxide

Density functional theory (DFT) is routinely used to calculate the adsorption energies of molecules on solid surfaces, which can be employed to derive surface phase diagrams. Such calculations become computationally expensive if the number of substrate atoms is large, which happens whenever the adsorbate coverage is small. Here, we propose an efficient method for calculating surface phase diagrams for redox-active adsorbates on semiconductors, that we apply to the important example of proton (H⁺) and hydride (H^-) adsorbates on a ZnO surface. We identify the leading cause for the coverage dependence of the adsorption energies to be the filling and depletion of the disperse substrate conduction band. From only four DFT calculations, coupled with an analysis of the substrate electronic band structure and changes in the electrostatic potential within the substrate upon adsorption, we derive a phenomenological model that well describes the coverage-dependent adsorption energies. Moreover, our model allows us to extrapolate to the "infinite" supercell limit, where additional H adsorption leads to an arbitrarily small increase of the surface coverage. With this tool we are able to derive a surface phase diagram containing structures with extremely small H coverages (<0.002 ML), that have so far been unattainable. We expect that such models can be applied to a wide range of semiconductor substrates and redox-active adsorbates.

A highly selective and stable ZnO-ZrO2 solid solution catalyst for CO2 hydrogenation to methanol

Although methanol synthesis via CO hydrogenation has been industrialized, CO₂ hydrogenation to methanol still confronts great obstacles of low methanol selectivity and poor stability, particularly for supported metal catalysts under industrial conditions. We report a binary metal oxide, ZnO-ZrO₂ solid solution catalyst, which can achieve methanol selectivity of up to 86 to 91% with CO₂ single-pass conversion of more than 10% under reaction conditions of 5.0 MPa, 24,000 ml/(g hour), H₂/CO₂ = 3:1 to 4:1, 320° to 315°C. Experimental and theoretical results indicate that the synergetic effect between Zn and Zr sites results in the excellent performance. The ZnO-ZrO₂ solid solution catalyst shows high stability for at least 500 hours on stream and is also resistant to sintering at higher temperatures. Moreover, no deactivation is observed in the presence of 50 ppm SO₂ or H₂S in the reaction stream.