Graphene Oxide: A Convenient Metal-Free Carbocatalyst for Facilitating Aerobic Oxidation of 5-Hydroxymethylfurfural into 2, 5-Diformylfuran

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

A DFT investigation of the catalytic oxidation of benzyl alcohol using graphene oxide

CONTEXT

Metal-free heterogeneous materials have attracted great interest due to their potential to facilitate various organic transformations in line with circular economy and green chemistry principles. Among various 2D materials, graphene oxide (GO) is considered an attractive material for numerous applications in physics, chemistry, biology, material sciences, and catalysis. Furthermore, graphene-based catalysts exhibit good catalytic activity toward the selective oxidation of benzyl alcohol to benzaldehyde or benzoic acid under eco-friendly conditions. In this regard, a theoretical investigation was carried out to study both catalytic oxidation reaction pathways (i.e., benzyl alcohols to aldehyde and to benzoic acid) using GO as an eco-friendly and metal-free catalyst.

METHODS

In this study, we report a theoretical investigation at the B3LYP/6-31G level to better understand the oxidation of benzyl alcohol using GO as a metal-free catalyst. The possible bond formation was investigated using the global and local reactivity indexes derived from Fukui functions. Furthermore, we performed a non-covalent interaction (NCI) analysis to unveil the stability and the interaction nature between both reagents and GO surface. The effect of the solvent on the oxidation efficiency was also performed and the results indicate that the solvent significantly affects the decrease of reactivity by increasing the activation barriers through oxidation reactions of benzyl alcohol. Additionally, the electron localization function (ELF) analysis was performed for all intermediates showing the ionic nature of the studied epoxide structure of GO and rules out any type of covalent interaction during the oxidation reaction of benzyl alcohol. All these obtained results are in good agreement with experimental observations and reveal that the epoxide functions on the graphene surface promote an excellent catalyst turnover.

Advances in Selective Electrochemical Oxidation of 5-Hydroxymethylfurfural to Produce High-Value Chemicals

The conversion of biomass is a favorable alternative to the fossil energy route to solve the energy crisis and environmental pollution. As one of the most versatile platform compounds, 5-hydroxymethylfural (HMF) can be transformed to various value-added chemicals via electrolysis combining with renewable energy. Here, the recent advances in electrochemical oxidation of HMF, from reaction mechanism to reactor design are reviewed. First, the reaction mechanism and pathway are summarized systematically. Second, the parameters easy to be ignored are emphasized and discussed. Then, the electrocatalysts are reviewed comprehensively for different products and the reactors are introduced. Finally, future efforts on exploring reaction mechanism, electrocatalysts, and reactor are prospected. This review provides a deeper understanding of mechanism for electrochemical oxidation of HMF, the design of electrocatalyst and reactor, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications.

Decorating Zn0.5Cd0.5S with C,N Co-Doped CoP: An Efficient Dual-Functional Photocatalyst for H2 Evolution and 2,5-Diformylfuran Oxidation

Photocatalytic H₂ evolution and biomass-derived alcohol oxidation is a cooperative way for improving the utilization of photogenerated charge carriers. Herein, a highly efficient photocatalyst was fabricated by decorating Zn_0.5Cd_0.5S with a C,N codoped CoP polyhedron (referred to as CoP, derived from ZIF-67), and then it was used for H₂ evolution and 5-hydroxymethylfurfural (HMF) oxidation. For the optimized sample (20% CoP/Zn_0.5Cd_0.5S), the generated H₂ rate is significantly enhanced from that of the HMF aqueous solution with 2,5-diformylfuran (DFF) as a concomitant product, about 31.7 times higher than the pristine Zn_0.5Cd_0.5S under visible light irradiation. The separation of photoexcited electrons (e^-) and holes (h⁺) in the process was promoted, as both e^- and h⁺ were involved in the desired conversions. From the results of density functional theory (DFT) calculations and in situ XPS spectra, the utilization of e^- was further improved as a spontaneous transfer from Zn_0.5Cd_0.5S to CoP occurred due to the p-n heterojunction formed between Zn_0.5Cd_0.5S (n type) and CoP (p type). This work provides an efficient method to separate the photoinduced charge carriers and a new way for H₂ evolution accompanied by transformation of HMF to DFF.

MIL-47(V)-derived carbon-doped vanadium oxide for selective oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran

The development and transformation of biomass-derived platform compounds is a sustainable way to deal with the fossil fuel crisis. 5-Hydroxymethylfurfural (HMF) can be reduced or oxidized to produce many high-value compounds; however, it is challenging to effectively produce 2,5-diformylfuran (DFF) due to overoxidation. In this work, a carbon-doped V₂O₅ (C-V₂O₅) material was obtained through pyrolysis of MIL-47(V) nanorods, a typical metal-organic framework material. The X-ray diffraction patterns and X-ray photoelectron spectra showed that the graphitized carbon species were incorporated in C-V₂O₅. High-efficiency HMF oxidation, high specific selectivity for DFF and excellent recycling could be achieved with the C-V₂O₅ catalyst. Fourier-transform infrared spectroscopy combined with density functional theory (DFT) calculation revealed that graphitized carbon weakens the VO bond and promotes the formation of oxygen vacancies in C-V₂O₅, thus improving the catalytic activity in the oxidation of furfuryl alcohols. The V⁴⁺ induced by oxygen vacancies will be oxidized by O₂ to form V⁵⁺, so that the cycle can be realized. It exhibits remarkable selectivity in the oxidation of different alcohols produced from biomass based on the relatively constant active sites in C-V₂O₅.

An Update on Graphene Oxide: Applications and Toxicity

Graphene oxide (GO) has attracted much attention in the past few years because of its interesting and promising electrical, thermal, mechanical, and structural properties. These properties can be altered, as GO can be readily functionalized. Brodie synthesized the GO in 1859 by reacting graphite with KClO3 in the presence of fuming HNO3; the reaction took 3-4 days to complete at 333 K. Since then, various schemes have been developed to reduce the reaction time, increase the yield, and minimize the release of toxic byproducts (NO2 and N2O4). The modified Hummers method has been widely accepted to produce GO in bulk. Due to its versatile characteristics, GO has a wide range of applications in different fields like tissue engineering, photocatalysis, catalysis, and biomedical applications. Its porous structure is considered appropriate for tissue and organ regeneration. Various branches of tissue engineering are being extensively explored, such as bone, neural, dentistry, cartilage, and skin tissue engineering. The band gap of GO can be easily tuned, and therefore it has a wide range of photocatalytic applications as well: the degradation of organic contaminants, hydrogen generation, and CO2 reduction, etc. GO could be a potential nanocarrier in drug delivery systems, gene delivery, biological sensing, and antibacterial nanocomposites due to its large surface area and high density, as it is highly functionalized with oxygen-containing functional groups. GO or its composites are found to be toxic to various biological species and as also discussed in this review. It has been observed that superoxide dismutase (SOD) and reactive oxygen species (ROS) levels gradually increase over a period after GO is introduced in the biological systems. Hence, GO at specific concentrations is toxic for various species like earthworms, Chironomus riparius, Zebrafish, etc.

Metal vs. Metal-Free Catalysts for Oxidation of 5-Hydroxymethylfurfural and Levoglucosenone to Biosourced Chemicals

Lignocellulosic feedstocks, such as forestry biomass and agricultural crop residues, can be utilized to generate biofuels and biochemicals. Converting these organic waste materials into biochemicals is widely regarded as a remedial approach to develop a sustainable, clean, and green energy source. Nevertheless, are these methods sustainable and clean? Prior studies have shown that most such conversions use metals - including heavy metals or noble metals - as catalysts. In addition to the fact that many metals (e. g., aluminum, cobalt, titanium, platinum) have been listed as critical minerals, these methods suffer from high cost, deactivation, and leakage problems and the release of toxic wastes. This Review summarizes catalytic methods using metal and metal-free catalysts for the oxidation of the platform molecules 5-hydroxymethylfurfural and levoglucosenone and demonstrates the potential and effectiveness of metal-free catalysts.

Study and application of graphene oxide in the synthesis of 2,3-disubstituted quinolines via a Povarov multicomponent reaction and subsequent oxidation

The carbocatalyzed synthesis of 2,3-disubstituted quinolines is disclosed. This process involved a three-component Povarov reaction of anilines, aldehydes and electron-enriched enol ethers, which gave the substrate for the subsequent oxidation. Graphene oxide (GO) was exploited as a heterogeneous, metal-free and sustainable catalyst for both transformations. The multicomponent reaction proceeded under simple and mild reaction conditions, exhibited good functional group tolerance, and could be easily scaled up to the gram level. A selection of tetrahydroquinolines obtained was subsequently aromatized to quinolines. The multistep synthesis could also be performed as a one-pot procedure. Investigation of the real active sites of GO was carried out by performing control experiments and a by full characterization of the carbon material by X-ray photoelectron spectroscopy (XPS) and solid-state nuclear magnetic resonance (ssNMR).

Catalytic applications of graphene oxide towards the synthesis of bioactive scaffolds through the formation of carbon–carbon and carbon–heteroatom bonds

During the past several decades, metal-based catalysis is one of the major and direct approaches for the synthesis of organic molecules. Nowadays, materials containing predominantly carbon element which are termed as carbocatalysts, become the most promising area of research to replace transition metal catalysts. In this context of carbocatalysis, the use of graphene oxide (GO) and GO-based materials are under spotlight due to their sustainability, environmental benignity and large scale-availability. The presence of oxygen containing functional groups in GO makes it benign oxidant and slightly acidic catalyst. This chapter provides a broad discussion on graphene oxide (GO) as well as its preparation, properties and vast area of application. The catalytic activity of GO has been explored in different organic transformations and it has been recognized as an oxidation catalyst for various organic reactions.

Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

Graphene-based nanocomposites with inorganic (metal and metal oxide) nanoparticles leads to materials with high catalytic activity for a variety of chemical transformations. Graphene and its derivatives such as graphene oxide, highly reduced graphene oxide, or nitrogen-doped graphene are excellent support materials due to their high surface area, their extended π-system, and variable functionalities for effective chemical interactions to fabricate nanocomposites. The ability to fine-tune the surface composition for desired functionalities enhances the versatility of graphene-based nanocomposites in catalysis. This review summarizes the preparation of graphene/inorganic NPs based nanocomposites and their use in catalytic applications. We discuss the large-scale synthesis of graphene-based nanomaterials. We have also highlighted the interfacial electronic communication between graphene/inorganic nanoparticles and other factors resulting in increased catalytic efficiencies.

Visible-Light-Induced, Graphene Oxide-Promoted C3-Chalcogenylation of Indoles Strategy under Transition-Metal-Free Conditions

An efficient and general method for the synthesis of 3-sulfenylindoles and 3-selenylindoles employing visible-light irradiation with graphene oxide as a promoter at room temperature has been achieved. The reaction features are high yields, simple operation, metal-free and iodine-free conditions, an easy-to-handle oxidant, and gram-scalable synthesis. This simple protocol allows one to access a wide range of 3-arylthioindoles, 3-arylselenylindoles, and even 3-thiocyanatoindoles with good to excellent yields.

Highly Ordered Mesoporous Co3 O4 Electrocatalyst for Efficient, Selective, and Stable Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Electrochemical oxidation of biomass substrates to valuable bio-chemicals is highly attractive. However, the design of efficient, selective, stable, and inexpensive electrocatalysts remains challenging. Here it is reported how a 3D highly ordered mesoporous Co3 O4 /nickel foam (om-Co3 O4 /NF) electrode fulfils those criteria in the electrochemical oxidation of 5-hydroxymethylfurfural (HMF) to value-added 2,5-furandicarboxylic acid (FDCA). Full conversion of HMF and an FDCA yield of >99.8 % are achieved with a faradaic efficiency close to 100 % at a potential of 1.457 V vs. reversible hydrogen electrode. Such activity and selectivity to FDCA are attributed to the fast electron transfer, high electrochemical surface area, and reduced charge transfer resistance. More impressively, remarkable catalyst stability under long-term testing is obtained with 17 catalytic cycles. This work highlights the rational design of metal oxides with ordered meso-structures for electrochemical biomass conversion.

Graphene oxide-catalyzed trifluoromethylation of alkynes with quinoxalinones and Langlois' reagent

The direct C–H trifluoromethylation of alkynes and quinoxalinones has been achieved using a graphene oxide/Langlois' reagent system. This multi-component tandem reaction using graphene oxide as the catalyst and Langlois' reagent as the robust CF₃ radical source results in the formation of olefinic C–CF₃ to access a series of 3-trifluoroalkylated quinoxalin-2(1H)-ones.

The direct C–H trifluoromethylation of alkynes and quinoxalinones using a graphene oxide/Langlois' reagent system.

Cobalt Boride/g-C3N4 Nanosheets-Assisted Electrocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

The electrochemical production of 2,5-furandicarboxylic acid (FDCA) from 5-(hydroxymethyl)furfural (HMF) is receiving growing attention. The FDCA-based polyethylene 2,5-furan dicarboxylate (PEF) polymer is a green candidate for substituting polyethylene terephthalate. This work demonstrated a highly efficient CoB/g-C3N4 nanosheet on the surface of the nickel foam as an electrode for the HMF electrooxidation reaction. Electrolysis at a constant potential combined with liquid chromatography showed the formation of FDCA with a yield of 97% with an excellent faradaic efficiency of near 95%. CoB/g-C3N4 achieved a current density of 20 mA cm−2 for HMF oxidation in 1.0 M KOH with 10 mM HMF at 1.37 V vs. RHE before the competing oxygen evolution reaction. The electrocatalyst was effectively reused up to three times without compromising efficiency. This work demonstrates a cheap and active electrocatalyst material for the electrochemical formation of FDCA from HMF and gives perception into the reaction mechanism.

Convenient one-pot synthesis of 1,2,4-oxadiazoles and 2,4,6-triarylpyridines using graphene oxide (GO) as a metal-free catalyst: importance of dual catalytic activity

A convenient and efficient process for the synthesis of 3,5-disubstituted 1,2,4-oxadiazoles and 2,4,6-triarylpyridines has been described using an inexpensive, environmentally benign, metal-free heterogeneous carbocatalyst, graphene oxide (GO). GO plays a dual role of an oxidizing agent and solid acid catalyst for synthesizing 1,2,4-oxadiazoles and triarylpyridines. This dual catalytic activity of GO is due to the presence of oxygenated functional groups which are distributed on the nanosheets of graphene oxide. A broad scope of substrate applicability and good sustainability is offered in this developed protocol. The results of a few control experiments reveal a plausible mechanism and the role of GO as a catalyst was confirmed by FTIR, XRD, SEM, and HR-TEM analysis.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

Synthesis and characterization of an α-MoO3 nanobelt catalyst and its application in one-step conversion of fructose to 2,5-diformylfuran

α-MoO3 nanobelts have been successfully synthesized and applied as a bifunctional catalyst for one-step conversion of fructose to DFF under atmospheric air.

Efficient photoelectrocatalytic performance of beta-cyclodextrin/graphene composite and effect of Cl− in water: degradation for bromophenol blue as a case study

Photoelectrocatalytic technology has proven to be an efficient way of degrading organic contaminants, including dyes. Graphene (GR) -based catalysts have been frequently used in photoelectrocatalysis, due to their excellent catalytic performances. In this work, the GR/beta-cyclodextrin (GR/β-CD) composite was prepared and used for a widely used triphenylmethane dye (bromophenol blue, BPB) photoelectrocatalytic degradation. The results indicated that the degradation of the prepared GR/β-CD composite for BPB was effective with the combination of external bias voltage and simulated sunlight irradiation. Under optimum conditions, the BPB (10 mg L⁻¹) was completely eliminated by GR/β-CD composite within 120 min. ˙O₂⁻ played a prominent role in the BPB photoelectrocatalytic degradation. The time required for the removal of BPB in water to reach 100% can be reduced to 30 min with the presence of Cl⁻, owing to the generation of ˙Cl. Moreover, the toxicity of the degraded system with Cl⁻, predicted by the QSAR (Quantitative Structure–Activity Relationship) model in ECOSAR (Ecological Structure–Activity Relationships) program, was weaker than that without Cl⁻. The prepared GR/β-CD composite revealed great advantages in photoelectrocatalytic degradation of organic pollutants due to its metal-free, low cost, simplicity, and efficient performance. This work provided new insight into the efficient and safe degradation of organic pollutants in wastewaters.

O₂˙⁻ played a crucial role in the photoelectrocatalytic degradation of BPB by the prepared GR/β-CD. Cl⁻ marginally promoted the degradation of BPB and chlorinated intermediates were generated.

Phosphorus-Doped Carbon Supported Vanadium Phosphate Oxides for Catalytic Oxidation of 5-Hydroxymethylfurfural to 2,5-Diformylfuran

2,5-diformylfuran (DFF) is an important downstream product obtained by selective oxidation of the biomass-based platform compound 5-hydroxymethylfurfural (HMF). In this study, a phosphorus-doped carbon (P-C) supported vanadium phosphate oxide (VPO) catalyst was successfully prepared and showed remarkably high catalytic activity in the selective oxidation of HMF to produce DFF with air as an oxidant. The effects of the reaction temperature, reaction time, solvent, catalyst amount, and VPO loading amount were investigated. The results showed that an HMF conversion rate of 100% and a DFF yield of 97.0% were obtained under suitable conditions, and DMSO was found to be the most suitable solvent under an air atmosphere.

Experimental and DFT Study of Metal-Free Catalyst for Selective Oxidation of Biomass-Derived Molecule (HMF)

Catalytic conversion of biomass or biomass-derived intermediate to value-added chemicals is important for both biomass waste management and production of industrially important chemicals. Oxidation of 5-hydroximethyl furfural (HMF) is considered one of the most important biomass conversion processes, which resulted in many value-added products such as 2,5-diformylfuran (DFF), 2,5-furandicarboxylic acid (FDCA), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), and 5-formyl-2-furancarboxylic acid (FFCA). In this study, the three morphologies of CdS catalyst (nanorod, nanosheet, and nanosphere) with two different crystalline structures are synthesized and characterized by SEM, TEM, and XRD analysis. The oxidation of HMF to FFCA is performed using the synthesized catalysts in the presence of different solvents and oxidizing agents. We find that CdS nanorod provides the selective oxidation of HMF to FFCA in the presence of dimethyl sulfoxide solvent and tert-butyl hydrogen peroxide oxidizing agent. The density functional theory (DFT) simulations are carried out to explain the catalytic activity of the CdS catalyst for oxidation of HMF to FFCA. The DFT simulations show that CdS is an excellent catalyst for binding HMF on the CdS surface. Our findings provide the way of effective oxidation of biomass into value-added products using the cheap CdS catalyst.

Graphene-based carbocatalysts for carbon-carbon bond formation

Organic transformations are usually catalyzed by metal-based catalysts. In contrast, metal-free catalysts have attracted considerable attention from the viewpoint of sustainability and safety. Among the studies in metal-free catalysis, graphene-based materials have been introduced in the reactions that are usually catalyzed by transition metal catalysts. This review covers the literature (up to the beginning of April 2020) on the use of graphene and its derivatives as carbocatalysts for C-C bond-forming reactions, which are one of the fundamental reactions in organic syntheses. Besides, mechanistic studies are included for the rational understanding of the catalysis. Graphene has significant potential in the field of metal-free catalysis because of the fine-tunable potential of the structure, high stability and durability, and no metal contamination, making it a next-generation candidate material in catalysis.

Bio-reduction of Graphene Oxide: Catalytic Applications of (Reduced) GO in Organic Synthesis

This work is based on various bio-reduction of graphene oxide into reduced graphene oxide and their applications in organic synthesis and group transformations. Graphene oxide, with abundant oxygencontaining functional groups on its basal plane, provides potential advantages, including excellent dispersibility in solvents and the good heterogeneous catalyst. This manuscript reviews various methods of synthesis of graphene and graphene oxide and a comparative study on their advantages and disadvantages, how to overcome disadvantages and covers extensive relevant literature review. In the last few years, investigation based on replacing the chemical reduction methods by some bio-compatible, chemical/impurity-free rGO including flash photo reductions, hydrothermal dehydration, solvothermal reduction, electrochemical approach, microwave-assisted reductions, light and radiation-induced reductions has been reported. Particularly, plant extracts have been applied significantly as an efficient reducing agent due to their huge bioavailability and low cost for bio-reduction of graphene oxide. These plant extracts mainly contain polyphenolic compounds, which readily get oxidized to the corresponding unreactive quinone form, which are the driving force for choosing them as bio-compatible catalyst. Currently, efforts are being made to develop biocompatible methods for the reduction of graphene oxide. The reduction abilities of such phytochemicals have been reported in the synthesis and stabilization of various nanoparticles viz. Ag, Au, Fe and Pd. Various part of plant extract has been applied for the green reduction of graphene oxide. Furthermore, the manuscript describes the catalytic applications of graphene oxide and reduced graphene oxide nanosheets as efficient carbo-catalysts for valuable organic transformations. Herein, important works dedicated to exploring graphene-based materials as carbocatalysts, including GO and rGO for organic synthesis including various functional group transformations, oxidation, reduction, coupling reaction and a wide number of multicomponent reactions have been highlighted. Finally, the aim of this study is to provide an outlook on future trends and perspectives for graphene-based materials in metal-free carbo-catalysis in green synthesis of various pharmaceutically important moieties.

A novel hafnium-graphite oxide catalyst for the Meerwein-Ponndorf-Verley reaction and the activation effect of the solvent

Construction and application of novel hydrogenation catalysts is important for the conversion of carbonyl or aldehyde compounds into alcohols in the field of biomass utilization. In this work, a novel, efficient, and easily prepared hafnium-graphite oxide (Hf-GO) catalyst was constructed via the coordination between Hf4+ and the carboxylic groups in GO. The catalyst was applied into the hydrogenation of biomass derived carbonyl compounds via the Meerwein-Ponndorf-Verley (MPV) reaction. The catalyst gave high efficiency under mild conditions. An interesting phenomenon was found whereby the activity of the catalyst increased gradually in the initial stage during reaction. The solvent, isopropanol, was proved to have an activation effect on the catalyst, and the activation effect varied with different alcohols and temperatures. Further characterizations showed that isopropanol played the activation effect via replacing the residual solvent (DMF) in micro- and mesopores during the preparation process, which was hard to be completely removed by common drying process.

Nanocarbon Catalysts: Recent Understanding Regarding the Active Sites

Although carbon itself acts as a catalyst in various reactions, the classical carbon materials (e.g., activated carbons, carbon aerogels, carbon black, carbon fiber, etc.) usually show low activity, stability, and oxidation resistance. With the recent availability of nanocarbon catalysts, the application of carbon materials in catalysis has gained a renewed momentum. The research is concentrated on tailoring the surface chemistry of nanocarbon materials, since the pristine carbons in general are not active for heterogeneous catalysis. Surface functionalization, doping with heteroatoms, and creating defects are the most used strategies to make efficient catalysts. However, the nature of the catalytic active sites and their role in determining the activity and selectivity is still not well understood. Herein, the types of active sites reported for several mainstream nanocarbons, including carbon nanotubes, graphene-based materials, and 3D porous nanocarbons, are summarized. Knowledge about the active sites will be beneficial for the design and synthesis of nanocarbon catalysts with improved activity, selectivity, and stability.

Metal-Free H2 Activation for Highly Selective Hydrogenation of Nitroaromatics Using Phosphorus-Doped Carbon Nanotubes

We reported that phosphorus-doped carbon nanotubes (P-CNTs), showing metal-like properties, can efficiently promote metal-free hydrogenation of nitrobenzene (1a) to aniline (2a) using molecular hydrogen (H₂) as a reducing reagent under very mild conditions with a reaction temperature of only 50 °C. The kinetics of 1a hydrogenation over P-CNT reveals that the hydrogenation rate of 1a is a first-order dependence on the H₂ pressure and the P-CNT loading level, and a zero-order dependence on 1a concentration, demonstrating the rate-determining step of H₂ adsorption and activation over P-CNT. The activation energy of P-CNT-catalyzed 1a hydrogenation is 43 ± 3 kJ mol^-1 with the turnover frequency around 3.60 ± 0.12 h^-1 at 50 °C. In addition to 1a, the general applicability of the P-CNT-promoted metal-free hydrogenation process is further demonstrated by applying various functionalized nitroaromatics with wide industrial interest. The P-CNT shows both excellent yields and selectivities to hydrogenation with respect to reducible, labile, and strong leaving groups on the nitroaromatics molecules. The stability and reusability of the P-CNT demonstrate up to eight-time recycling without evident loss of activity and selectivity. In addition to hydrogenation, metal-free catalytic transfer hydrogenation of 1a is achieved with P-CNT using diverse hydrogen sources, including hydrazine hydrate (N₂H₄·H₂O), carbon monoxide/water (CO/H₂O), and formic acid/triethylamine (HCOOH/Et₃N).

A Z-scheme ZnIn2S4/Nb2O5 nanocomposite: constructed and used as an efficient bifunctional photocatalyst for H2 evolution and oxidation of 5-hydroxymethylfurfural

A bifunctional Z-scheme ZnIn₂S₄/Nb₂O₅ photocatalyst was fabricated, which can be used both for hydrogen evolution and HMF oxidation.

Bifunctional carbon nanoplatelets as metal-free catalysts for direct conversion of fructose to 2,5-diformylfuran

Modified graphitic carbon nanoplatelets were prepared and used as bifunctional metal-free catalysts for the tandem reaction from fructose to DFF.

The direct C3 chalcogenylation of indolines using a graphene-oxide-promoted and visible-light-induced synergistic effect

A green methodology for the construction of carbon–chalcogen (S and Se) bonds via a GO-promoted and metal-free light-induced synergistic effect is demonstrated.

Emerging Trends in the Syntheses of Heterocycles Using Graphene-based Carbocatalysts: An Update

Graphene-based carbocatalysts owing to numerous amazing properties such as large specific surface area, high intrinsic mobility, excellent thermal and electrical conductivities, chemical stability, ease of functionalization, simple method of preparation, effortless recovery and recyclability have gained a superior position amongst the conventional homogeneous and heterogeneous catalysts. In this review, an endeavor has been made to highlight the syntheses of diverse heterocyclic compounds catalyzed by graphene-based catalysts. Further, the study also reveals that all the catalysts could be reused several times without significant loss in their catalytic activity. Additionally, most of the reactions catalyzed by graphene-based carbocatalysts were carried out at ambient temperature and under solvent-free conditions. Thus, the graphene-based catalysts do not merely act as efficient catalysts but also serve as sustainable, green catalysts. This review is divided into various sub-sections, each of which comprehensively describes the preparation of a particular heterocyclic scaffold catalyzed by graphene-derived carbocatalyst in addition to synthesis of graphene oxide and reduced graphene oxide, functionalization, and structural features governing their catalytic properties. Synthesis of heterocycles catalyzed by graphene-based carbocatalysts.

Adjusting the Structure and Electronic Properties of Carbons for Metal-Free Carbocatalysis of Organic Transformations

Carbon nanomaterials doped with some other lightweight elements were recently described as powerful, heterogeneous, metal-free organocatalysts, adding to their high performance in electrocatalysis. Here, recent observations in traditional catalysis are reviewed, and the underlying reaction mechanisms of the catalyzed organic transformations are explored. In some cases, these are due to specific active functional sites, but more generally the catalytic activity relates to collective properties of the conjugated nanocarbon frameworks and the electron transfer from and to the catalytic centers and substrates. It is shown that the learnings are tightly related to those of electrocatalysis; i.e., the search for better electrocatalysts also improves chemocatalysis, and vice versa. Carbon-carbon heterojunction effects and some perspectives on future possibilities are discussed at the end.