From Internal Olefins to Linear Amines: Ruthenium-Catalyzed Domino Water–Gas Shift/Hydroaminomethylation Sequence

Selective and stable tetraphosphite for Rh-catalyzed linear hydroaminomethylation of aliphatic and aromatic terminal olefins

A highly selective and stable tetraphosphite ligand TBTP was reported for Rh-catalyzed linear selective hydroaminomethylation of both aliphatic and aromatic terminal olefins, giving up to 10 000 TON, 99.9% linear amines with isolated yields up to 98.2%.

A Selective and General Cobalt-Catalyzed Hydroaminomethylation of Olefins to Amines

A new cobalt catalyst is presented for the domino hydroformylation-reductive amination reaction of olefins. The optimal Co-tert-BuPy-Xantphos catalyst shows good to excellent linear-to-branched (n/iso) regioselectivity for the reactions of aliphatic alkenes with aromatic amines under mild conditions. This system is far more selective than traditional cobalt(I) catalysts and even better than most known rhodium catalysts.

Copper-catalysed low-temperature water-gas shift reaction for selective deuteration of aryl halides

The introduction of deuterium atoms into organic compounds is of importance for basic chemistry, material sciences, and the development of drugs in the pharmaceutical industry, specifically for identification and quantification of metabolites. Hence, methodologies for the synthesis of selectively labelled compounds continue to be a major area of interest for many scientists. Herein, we present a practical and stable heterogeneous copper catalyst, which permits for dehalogenative deuteration via water–gas shift reaction at comparably low temperature. This novel approach allows deuteration of diverse (hetero)aryl halides with good functional group tolerance, and no reduction of the aromatic rings or other easily reducible formyl and cyano groups. Multi-gram experiments show the potential of this method in organic synthesis and medicinal chemistry.

A practical and stable heterogeneous copper catalyst has been developed for dehalogenative deuteration via water–gas shift reaction at low temperature, allowing deuteration of diverse (hetero)aryl halides with good functional group tolerance.

The first one-pot metathesis–hydroformylation procedure: a straight synthesis of 2-arylpropanals from renewable 1-propenylbenzenes

2-Arylpropanals are synthesised from renewable 1-propenylbenzenes via a two-step, one-pot procedure.

The Mechanism of the Intramolecular Hydrocarbyl Metathesis within a Planar Triruthenium Cluster: Combining Core Flexibility with Hydride Mobility

The transition metal catalysed formation and cleavage of C-C bonds is of utmost importance in synthetic chemistry. While most of the existing homogeneous catalysts are mononuclear, knowledge of the behaviour of polynuclear species is much more limited. By using computational methods, here we shed light into the mechanistic details of the thermally-induced isomerization of Cp*₃ Ru₃ (μ-H)₂ (μ₃ -η² -pentyne)(μ₃ -pentylidyne) (2) into Cp*₃ Ru₃ (μ-H)₂ (μ₃ -η² -octyne)(μ₃ -ethylidyne) (3), a process that involves the migration of a C₃ fragment between the hydrocarbyl ligands and across the plane formed by the three Ru centres. Our results show this to be a complex transformation that comprises of five individual rearrangements in an A→B→A→B→A order. Each so-called rearrangement A consists of the CH migration from the μ₃ -η² -alkyne into the μ₃ -alkylidine ligand in the other side of the Ru₃ plane. This process is facilitated by the cluster's ability to adopt open-core structures in which one Ru-Ru bond is broken and a new C-C bond is formed. In contrast, rearrangements B do not involve the formation or cleavage of C-C bonds, nor do they require the opening of the cluster core. Instead, they consist of the isomerization of the μ₃ -η² -alkyne and μ₃ -alkylidyne ligands on each side of the triruthenium plane into μ₃ -alkylidyne and μ₃ -η² -alkyne, respectively. Such transformation implies the migration of three H atoms within the hydrocarbyl ligands, and in this case, it is aided by the cluster's ability to behave as a H reservoir. All in all, this study highlights the plasticity of these Ru₃ clusters, whereby Ru-Ru, Ru-C, Ru-H, C-C, and C-H bonds are formed and broken with surprising ease.

Architecture and synthesis of P,N-heterocyclic phosphine ligands

Diverse P,N-phosphine ligands reported to date have performed exceptionally well as auxiliary ligands in organometallic catalysis. Phosphines bearing 2-pyridyl moieties prominently feature in literature as compared to phosphines with five-membered N-heterocycles. This discussion seeks to paint a broad picture and consolidate different synthetic protocols and techniques for N-heterocyclic phosphine motifs. The introduction provides an account of P,N-phosphine ligands, and their structural and coordination benefits from combining heteroatoms with different basicity in one ligand. The body discusses the synthetic protocols which focus on P–C, P–N-bond formation, substrate and nucleophile types and different N-heterocycle construction strategies. Selected references are given in relation to the applications of the ligands.

Rh(i) and Ru(ii) phosphaamidine and phosphaguanidine (1,3-P,N) complexes and their activity for CO2 hydrogenation

Phosphaamidine metal complexes Rh₂Cl₂[Ph₂PC(Ph)[double bond, length as m-dash]NPh]₂μ-CO (1), RuCl₂[Ph₂PC(Ph)[double bond, length as m-dash]N(Ph)]₂ (2), [Rh{ⁱPr₂PC(Ph)[double bond, length as m-dash]NⁱPr}(COD)]BF₄ (3), and RuCl₂[ⁱPr₂PC(Ph)[double bond, length as m-dash]NⁱPr](DMSO)₂ (4) are prepared by combining phosphaamidines Ph₂P-C(Ph)[double bond, length as m-dash]NPh and ⁱPr₂P-C(Ph)[double bond, length as m-dash]NⁱPr (1,3-P,N) with their corresponding metal ions. Complexes 1 and 2 are stable in air while 3 and 4 are stable under inert conditions. For further comparison of structure and stability, a Ru(ii) phosphaguanidine complex, RuCl₂[Me₂NC(PPh₂)[double bond, length as m-dash]NⁱPr](DMSO)₂ (6) was prepared. Complex 6 is stable in air and in the presence of water. The structures of the phosphaamidine and phosphaguanidine complexes, determined using single crystal X-ray diffraction, revealed P,N bidentate coordination. While all five complexes have some activity as precatalysts, complex 6 was the most active.

A Multicatalytic Approach to the Hydroaminomethylation of α-Olefins

We report an approach to conducting the hydroaminomethylation of diverse α-olefins with a wide range of alkyl, aryl, and heteroarylamines at relatively low temperatures (70-80 °C) and pressures (1.0-3.4 bar) of synthesis gas. This approach is based on simultaneously using two distinct catalysts that are mutually compatible. The hydroformylation step is catalyzed by a rhodium diphosphine complex, and the reductive amination step, which is conducted as a transfer hydrogenation with aqueous, buffered sodium formate as the reducing agent, is catalyzed by a cyclometallated iridium complex. By adjusting the ratio of CO to H2 , we conducted the reaction at one atmosphere of gas with little change in yield. A diverse array of olefins and amines, including hetreroarylamines that do not react under more conventional conditions with a single catalyst, underwent hydroaminomethylation with this new system, and the pharmaceutical ibutilide was prepared in higher yield and under milder conditions than with a single catalyst.

Unexpected formation and conversion: role of substituents of 1,3-ynones in the reactivity and product distribution during their reactions with Ru3(CO)12

Electronic and steric effects of the substituents in 1,3-ynones play key roles in the product distribution and molecular structures.

Activation reactions of 2-pyridyl and 2-pyrimidinyl alkynes with Ru3(CO)12

The strong coordination ability of nitrogen atoms of N-heterocyclic groups plays key roles in the product distribution and molecular structures.

Reactions in Water - A Greener Approach Using Ruthenium Catalysts

Reactions using transition metals as catalysts have emerged as an efficient method in the recent times. However, the selection of solvent plays a crucial role in this regard. Several solvents used traditionally suffer majorly with problems of toxicity; high boiling point etc. leading to drastic reaction conditions. Water being a non-toxic, non-inflammable and environmentally benign can replace the hazardous organic solvents in laboratory as well as industry. Maintaining a minimum catalyst loading percentage we can advantageously avail high levels of selectivity. Water was found to be a good solvent medium for several metal catalysed reactions. An intramolecular deprotonation mechanism is followed by the ruthenium (II) catalysts in water; thereby, facilitating the catalytic action of the metal. These studies can help the industrial chemists to utilize water as a solvent for their reactions towards improvement of their waste management procedure. This review mainly focuses on the several recent developments in the above direction.

Reaction of FcC[triple bond, length as m-dash]CC(O)R (Fc = ferrocenyl) with Ru3(CO)12 leading to unexpected nitro-group reduced ruthenoles and 1,2-CO-inserted triruthenium clusters

The reaction of Ru₃(CO)₁₂ with ferrocene-containing alkynyl ketones FcC[triple bond, length as m-dash]CC(O)R (Fc = ferrocenyl; R = Ph (1); 2-thienyl (2); 4-CH₃O-Ph (3); 4-NH₂-Ph (4); 4-NO₂-Ph (5); ferrocenyl (6)) proceeds in toluene with the formation of triruthenium clusters (1a-6a), ruthenoles (1b-5b, 5c and 1d-5d) and unexpected 1,2-CO-inserted triruthenium clusters (1c-4c). 1a-6a were isolated from the reaction of Ru₃(CO)₁₂ with one equivalent of 1-6, respectively. Ruthenoles 1b-5b, 5c and 1d-5d were collected by adding 1-5 to the corresponding 1a-5a in a molar ratio of 1 : 1, respectively. Unexpectedly, the nitro group in one of the two phenyl rings in both 5c and 5d molecules was reduced to an amino group, while their ruthenole skeletons are retained. When 1-4 were added to the corresponding 1a-4a in a molar ratio of 1 : 1, respectively, the unusual triruthenium clusters (1c-4c) were isolated, involving 1,2-insertion of a terminal coordinated carbonyl between two C[triple bond, length as m-dash]C units of the ynone molecules. No reaction between 6a and 6 was observed. And the familiar cyclotrimerization products were not found. All new compounds were characterized by NMR, FT-IR, and MS-ESI and most of them were structurally confirmed by single crystal X-ray diffraction. The results suggested that the ferrocenyl groups in the 1,3-ynones exhibit strong electron and steric effects on the reaction process and product distribution during their reactions with Ru₃(CO)₁₂.

An efficient and recyclable ionic diphosphine-based Ir-catalyst for hydroaminomethylation of olefins with H2O as the hydrogen source

One-pot tandem hydroaminomethylation with H₂O as the hydrogen source was accomplished over an ionic diphosphine-based Ir-catalyst with high efficiency and recyclability.

Electronic and steric effects of substituents in 1,3-diphenylprop-2-yn-1-one during its reaction with Ru3(CO)12

Electronic and steric effects of substituents of alkynyl ketones play important roles in regulating reaction pathways.

Harnessing the Power of the Water-Gas Shift Reaction for Organic Synthesis

Since its original discovery over a century ago, the water-gas shift reaction (WGSR) has played a crucial role in industrial chemistry, providing a source of H2 to feed fundamental industrial transformations such as the Haber-Bosch synthesis of ammonia. Although the production of hydrogen remains nowadays the major application of the WGSR, the advent of homogeneous catalysis in the 1970s marked the beginning of a synergy between WGSR and organic chemistry. Thus, the reducing power provided by the CO/H2 O couple has been exploited in the synthesis of fine chemicals; not only hydrogenation-type reactions, but also catalytic processes that require a reductive step for the turnover of the catalytic cycle. Despite the potential and unique features of the WGSR, its applications in organic synthesis remain largely underdeveloped. The topic will be critically reviewed herein, with the expectation that an increased awareness may stimulate new, creative work in the area.