Mechanism of Alkene, Alkane, and Alcohol Oxidation with H2O2 by an in Situ Prepared MnII/Pyridine-2-carboxylic Acid Catalyst

A Ru-porphyrin metal-organic framework with Mn2+ paddlewheel nodes for the selective oxidation of C(sp3)-H bonds

The activation and selective functionalization of inert C(sp3)-H bonds is fundamental for industrial applications and occupies a very important place in industry, but it remains a great challenge in current synthetic chemistry. In this paper, we report an approach for activating reactive tert-butyl peroxyl radicals by modifying Ru-porphyrin into metal-organic frameworks (MOFs) for the activation of inert C(sp3)-H bonds. Under mild conditions, the Ru-porphyrinyl MOF can activate the peroxyl radical, extracting a hydrogen atom from the inert C(sp3)-H bond. Mn2+ paddlewheels with unsaturated coordination sites were introduced into the MOF, and direct oxidative conversion using environmentally friendly oxygen provides a new pathway to activate the inert C(sp3)-H bond.

A manganese-based catalyst system for general oxidation of unactivated olefins, alkanes, and alcohols

Non-noble metal-based catalyst systems consisting of inexpensive manganese salts, picolinic acid and various heterocycles enable epoxidation of the challenging (terminal) unactivated olefins, selective C-H oxidation of unactivated alkanes, and O-H oxidation of secondary alcohols with aqueous hydrogen peroxide. In the presence of the in situ generated optimal manganese catalyst, epoxides are generated with up to 81% yield from alkenes and ketone products with up to 51% yield from unactivated alkanes. This convenient protocol allows the formation of the desired products under ambient conditions (room temperature, 1 bar) by employing only a slight excess of hydrogen peroxide with 2,3-butadione as a sub-stoichiometric additive.

Continuous Flow Epoxidation of Alkenes Using a Homogeneous Manganese Catalyst with Peracetic Acid

Epoxidation of alkenes is a valuable transformation in the synthesis of fine chemicals. Described herein are the design and development of a continuous flow process for carrying out the epoxidation of alkenes with a homogeneous manganese catalyst at metal loadings as low as 0.05 mol%. In this process, peracetic acid is generated in situ and telescoped directly into the epoxidation reaction, thus reducing the risks associated with its handling and storage, which often limit its use at scale. This flow process lessens the safety hazards associated with both the exothermicity of this epoxidation reaction and the use of the highly reactive peracetic acid. Controlling the speciation of manganese/2-picolinic acid mixtures by varying the ligand:manganese ratio was key to the success of the reaction. This continuous flow process offers an inexpensive, sustainable, and scalable route to epoxides.

A Common Active Intermediate in the Oxidation of Alkenes, Alcohols and Alkanes with H2O2 and a Mn(II)/Pyridin-2-Carboxylato Catalyst

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H2O2, catalysed by an in situ prepared mixture of a MnII salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3.5 and shows the reactive species to be selective despite a zero order dependence on substrate concentration, and the high turnover frequencies (up to 30 s-1) observed. Selective 18O labelling identifies the origin of the oxygen atoms transferred to the substrate during oxidation, and is consistent with a highly reactive, e. g., [MnV(O)(OH)] or [MnV(O)2], species rather than an alkylperoxy or hydroperoxy species.

Vanadium(VIV)-Porphyrin-Based Metal-Organic Frameworks for Synergistic Bimetallic Activation of Inert C(sp3)-H Bonds

Activation and selective functionalization of inert C(sp³)-H bonds remain one of the most challenging tasks in current synthetic chemistry. Herein, by decorating vanadium(V^IV)-porphyrin into metal-organic frameworks (MOFs) to stabilize the active tertbutyl peroxide radical, we reported a new approach to accomplish inert C(sp³)-H bond activation by a synergistic bimetallic strategy via a hydrogen atom transfer process under mild conditions. The stabilized peroxide radical by V^IV-porphyrin-based MOFs abstracted a hydrogen atom from the inert C(sp³)-H bonds for direct oxidization transformation utilizing environmentally friendly oxygen. Taking advantage of the high stability of Zr₆ clusters, the new Zr-MOF was recyclable six times without a conversion efficiency decrease. From this foundation, {Mn₃(μ₃-O)} cluster nodes with potential unsaturated coordinated sites were introduced into MOFs to replace Zr₆ clusters, realizing the pre-activation of substrates through the interaction between Mn nodes and substrates. The synergistic bimetallic activation effect of V^IV-porphyrin and Mn nodes dramatically promoted the conversion efficiency and product selectivity for inert C(sp³)-H bond functionalization.

Off-line analysis in the manganese catalysed epoxidation of ethylene-propylene-diene rubber (EPDM) with hydrogen peroxide

The epoxidation of ethylene-propylene-diene rubber (EPDM) with 5-ethylidene-2-norbornene (ENB) as the diene to epoxidized EPDM (eEPDM) creates additional routes to cross-linking and reactive blending, as well as increasing the polarity and thereby the adhesion to polar materials, e.g., mineral fillers such as silica. The low solubility of apolar, high molecular weight polymers in the polar solvents constrains the catalytic method for epoxidation that can be applied. Here we have applied an in situ prepared catalyst comprising a manganese(ii) salt, sodium picolinate and a ketone to the epoxidation of EPDM rubber with hydrogen peroxide (H₂O₂) as the oxidant in a solvent mixture, that balances the need for polymer and catalyst/oxidant miscibility and solubility. Specifically, a mixture of cyclohexane and cyclohexanone is used, where cyclohexanone functions as a co-solvent as well as the ketone reagent. Reaction progress was monitored off-line through a combination of Raman and ATR-FTIR spectroscopies, which revealed that the reaction profile and the dependence on the composition of the catalyst are similar to those observed with low molar mass alkene substrates, under similar reaction conditions. The combination of spectroscopies offers a reliable method for off-line reaction monitoring of both the extent of the conversion of unsaturation (Raman) and the extent of epoxidation (FTIR) as well as determining side reactions, such as epoxide ring opening and further, aerobic oxidation. The epoxidation of EPDM described, in contrast to currently available methods, uses a non-scarce manganese catalyst and H₂O₂, and avoids side reactions, such as those that can occur with peracids.

Epoxidation of ethylene-propylene-diene rubber (EPDM), based on 5-ethylidene-2-norbornene, to epoxidized EPDM (eEPDM) opens routes to cross-linking and reactive blending, with increased polarity aiding adhesion to polar materials such as silica.

Sustainable oxidation of cyclohexane catalyzed by a VO(acac)2-oxalic acid tandem: the electrochemical motive of the process efficiency

Cyclohexane oxidation by H₂O₂ to cyclohexanol, cyclohexanone, and cyclohexylhydroperoxide under mild (40 °C, 1 atm) conditions is significantly enhanced in the system composed of VO(acac)₂ (starting catalyst) and small additives of oxalic acid (process promoter). In corroboration of this, several times higher yield of the desired products was obtained compared to that obtained in the acid-free process. The revealed advantage was addressed to elevate the electrical conductance G (or vice versa, decreasing the resistance, 1/G) of the reaction medium. On the other hand, the content of oxalic acid (20–30 mM) was compulsory to optimize the process parameters. The last value of concentration affords, besides the lowest 1/G, the utmost impact on pH, redox potential, and current–voltage relationships. Exceeding this level leads to an increase in 1/G of the reaction solution, ceases the impact on pH, ORP, and CV profiles, and is detrimental for the product yield. The putative mechanism of the revealed effects has been envisaged.

Cyclohexane oxidation by H₂O₂ to cyclohexanol, cyclohexanone, and cyclohexylhydroperoxide under mild (40 °C, 1 atm) conditions is significantly enhanced in the system composed of VO(acac)₂ (starting catalyst) and small additives of oxalic acid (process promoter).

Pyridine-2-carboxylic acid as an effectual catalyst for rapid multi-component synthesis of pyrazolo[3,4-b]quinolinones

Green synthesis of pyrazolo[3,4-b]quinolinones was designed using bioproduct pyridine-2-carboxylic acid (P2CA) as a green and efficient catalyst. The multi-component reaction of aldehydes, 1,3-cyclodiones and 5-amino-1-phenyl-pyrazoles regioselectively produced pyrazolo[3,4-b]quinolinones in excellent yield (84–98%). Recyclization of the catalyst was also investigated. The electronic effect of the various substituents in aromatic rings indicated that the reaction proceeded through the carbocation intermediate. This newly designed protocol very quickly constructed products conventionally under milder conditions.

Green synthesis of pyrazolo[3,4-b]quinolinones was designed using bioproduct pyridine-2-carboxylic acid (P2CA) as a green and efficient catalyst.

Oxidative Cleavage of Alkene C=C Bonds Using a Manganese Catalyzed Oxidation with H2O2 Combined with Periodate Oxidation

A one‐pot multi‐step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is described as an alternative to ozonolysis. The first step is a highly efficient manganese catalyzed epoxidation/cis‐dihydroxylation of alkenes. This step is followed by an Fe(III) assisted ring opening of the epoxide (where necessary) to a 1,2‐diol. Carbon–carbon bond cleavage is achieved by treatment of the diol with sodium periodate. The conditions used in each step are not only compatible with the subsequent step(s), but also provide for increased conversion compared to the equivalent reactions carried out on the isolated intermediate compounds. The described procedure allows for carbon–carbon bond cleavage in the presence of other alkenes, oxidation sensitive moieties and other functional groups; the mild conditions (r.t.) used in all three steps make this a viable general alternative to ozonolysis and especially for use under flow or continuous batch conditions.

Origins of Catalyst Inhibition in the Manganese-Catalysed Oxidation of Lignin Model Compounds with H2 O2

The upgrading of complex bio-renewable feedstock, such as lignocellulose, through depolymerisation benefits from the selective reactions at key functional groups. Applying homogeneous catalysts developed for selective organic oxidative transformations to complex feedstock such as lignin is challenged by the presence of interfering components. The selection of appropriate model compounds is essential in applying new catalytic systems and identifying such interferences. Here, it was shown by using as an example the oxidation of a model substrate containing a β-O-4 linkage with H2 O2 and an in situ-prepared manganese-based catalyst, capable of efficient oxidation of benzylic alcohols, that interference from compounds liberated during the reaction can prevent its application to lignocellulose depolymerisation.

Efficient and selective oxidation of alcohols to carbonyl compounds at room temperature by a ruthenium complex catalyst and hydrogen peroxide

An efficient system comprising a ruthenium complex and hydrogen peroxide was developed for the oxidation of various primary and secondary alcohols at room temperature.

Pyrazine dicarboxylate-bridged arsenotungstate: synthesis, characterization, and catalytic activities in epoxidation of olefins and oxidation of alcohols

The catalytic properties and polyanionic structure of pyrazine dicarboxylate-bridged arsenotungstate are reported.

Copper(II) Complexes of Arylhydrazone of 1H-Indene-1,3(2H)-dione as Catalysts for the Oxidation of Cyclohexane in Ionic Liquids

The copper(II) complexes [CuL(H2O)2]∙H2O (1) and [CuL(dea)] (2) [L = 2-(2-(1,3-dioxo-1H-inden-2(3H)-ylidene)hydrazinyl)benzenesulfonate, dea = diethanolamine] were applied as catalysts in the peroxidative (with tert-butyl-hydroperoxide or hydrogen peroxide) conversion of cyclohexane to cyclohexanol and cyclohexanone, either in acetonitrile or in any of the ionic liquids [bmim][NTf2] and [hmim][NTf2] [bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, NTf2 = bis(trifluoromethanesulfonyl) imide]. Tert-butyl-hydroperoxide led to better product yields, as compared to H2O2, with a selectivity directed towards cyclohexanone. The ILs showed a better performance than the conventional solvent for the copper complex 1. No catalytic activity was observed for 2 in the presence of an IL.

Oxidation of Vicinal Diols to α-Hydroxy Ketones with H2O2 and a Simple Manganese Catalyst

α-Hydroxy ketones are valuable synthons in organic chemistry. Here we show that oxidation of vic-diols to α-hydroxy ketones with H₂O₂ can be achieved with an in situ prepared catalyst based on manganese salts and pyridine-2-carboxylic acid. Furthermore the same catalyst is effective in alkene epoxidation, and it is shown that alkene oxidation with the Mn^II catalyst and H₂O₂ followed by Lewis acid ring opening of the epoxide and subsequent oxidation of the alkene to α-hydroxy ketones can be achieved under mild (ambient) conditions.

Manganese complex-catalyzed oxidation and oxidative kinetic resolution of secondary alcohols by hydrogen peroxide

The highly efficient catalytic oxidation and oxidative kinetic resolution (OKR) of secondary alcohols has been achieved using a synthetic manganese catalyst with low loading and hydrogen peroxide as an environmentally benign oxidant in the presence of a small amount of sulfuric acid as an additive. The product yields were high (up to 93%) for alcohol oxidation and the enantioselectivity was excellent (>90% ee) for the OKR of secondary alcohols. Mechanistic studies revealed that alcohol oxidation occurs via hydrogen atom (H-atom) abstraction from an α-CH bond of the alcohol substrate and a two-electron process by an electrophilic Mn-oxo species. Density functional theory calculations revealed the difference in reaction energy barriers for H-atom abstraction from the α-CH bonds of R- and S-enantiomers by a chiral high-valent manganese-oxo complex, supporting the experimental result from the OKR of secondary alcohols.

A green and efficient photo-driven route for the selective oxidation of aqueous isopropanol solution to pinacol (C6) with hydrogen peroxide

The proposed strategy provides a green solution for the synthesis of aliphatic pinacol and offers a new design for the construction of C–C bonds with alphatic alcohol.