Simultaneous Reduction of CO2 and Splitting of H2O by a Single Immobilized Cobalt Phthalocyanine Electrocatalyst

Nonidealities in CO2 Electroreduction Mechanisms Revealed by Automation-Assisted Kinetic Analysis

In electrocatalysis, mechanistic analysis of reaction rate data often relies on the linearization of relatively simple rate equations; this is the basis for typical Tafel and reactant order dependence analyses. However, for more complex reaction phenomena, such as surface coverage effects or mixed control, these common linearization strategies will yield incomplete or uninterpretable results. Cohesive kinetic analysis, which is often used in thermocatalysis and involves quantitative model fitting for data collected over a wide range of reaction conditions, requires more data but also provides a more robust strategy for interrogating reaction mechanisms. In this work, we report a robotic system that improves the experimental workflow for collecting electrochemical rate data by automating sequential testing of up to 10 electrochemical cells, where each cell can have a different electrode, electrolyte, gas-phase reactant composition, and applied voltage. We used this system to investigate the mechanism of carbon dioxide electroreduction to carbon monoxide at several immobilized metal tetrapyrroles. Specifically, at cobalt phthalocyanine (CoPc), cobalt tetraphenylporphyrin (CoTPP), and iron phthalocyanine (FePc), we see signatures of complex reaction mechanisms, where observed bicarbonate and CO2 order dependences change with applied potential. We illustrate how phenomena such as electrolyte poisoning and potential-dependent degrees of rate control can explain the observed kinetic behaviors. Our mechanistic analysis suggests that CoPc and CoTPP share a similar reaction mechanism, akin to one previously proposed, whereas the mechanism for FePc likely involves a species later in the catalytic cycle as the most abundant reactive intermediate. Our study illustrates that complex reaction mechanisms that are not amenable to common Tafel and order dependence analyses may be quite prevalent across this class of immobilized metal tetrapyrrole electrocatalysts.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

A replacement strategy for regulating local environment of single-atom Co-SxN4-x catalysts to facilitate CO2 electroreduction

The performances of single-atom catalysts are governed by their local coordination environments. Here, a thermal replacement strategy is developed for the synthesis of single-atom catalysts with precisely controlled and adjustable local coordination environments. A series of Co-SxN4-x (x = 0, 1, 2, 3) single-atom catalysts are successfully synthesized by thermally replacing coordinated N with S at elevated temperature, and a volcano relationship between coordinations and catalytic performances toward electrochemical CO2 reduction is observed. The Co-S1N3 catalyst has the balanced COOH*and CO* bindings, and thus locates at the apex of the volcano with the highest performance toward electrochemical CO2 reduction to CO, with the maximum CO Faradaic efficiency of 98 ± 1.8% and high turnover frequency of 4564 h-1 at an overpotential of 410 mV tested in H-cell with CO2-saturated 0.5 M KHCO3, surpassing most of the reported single-atom catalysts. This work provides a rational approach to control the local coordination environment of the single-atom catalysts, which is important for further fine-tuning the catalytic performance.

Bimetallic synergistic catalysts based on two-dimensional carbon-rich conjugated frameworks for nitrate electrocatalytic reduction to ammonia: catalyst screening and mechanism insights

The discovery of the 'two birds, one stone' electrochemical nitrate reduction reaction (NO3RR) allows for the removal of harmful NO3-pollutants as well as the production of economically beneficial ammonia (NH3). However, current understanding of the catalytic mechanism of NO3RR is not enough, and this research is still challenging. To determine the mechanism needed to create efficient electrocatalysts, we thoroughly examined the catalytic activity of molybdenum-based diatomic catalysts (DACs) anchored on two-dimensional carbon-rich conjugated frameworks (2D CCFs) for NO3RR. Among the 23 candidate materials, after a four-step screening method and detailed mechanism studies, we discovered that NO3RR can efficiently generate NH3by following the N-end pathway on the MoTi-Pc, MoMn-Pc, and MoNb-Pc, with limiting potential of -0.33 V, -0.13 V, and -0.38 V, respectively. The activity of NO3RR can be attributed to the synergistic effect of the TM1-TM2dimer d orbital coupling to the anti-bonding orbital of NO3-. Additionally, high hybridization between the Mo-4d, TM-3d(4d), and NO3--2p orbitals on the MoTMs-Pc DACs can speed up the flow of electrons from the Mo-TM dual-site to NO3-. The research presented here paves the way for the reasonable design of effective NO3RR catalysts and offers a theoretical basis for experimental research.

Revealing a Double-Volcano-Like Structure-Activity Relationship for Substitution-Functionalized Metal-Phthalocyanine Catalysts toward Electrochemical CO2 Reduction

Electron-donating/-withdrawing groups (EDGs/EWGs) substitution is widely used to regulate the catalytic performance of transition-metal phthalocyanine (MPc) toward electrochemical CO2 reduction, but the corresponding structure-activity relationships and regulation mechanisms are still ambiguous. Herein, by investigating a series of substitution-functionalized MPc (MPc-X), this work reveals a double-volcano-like relationship between the electron-donating/-withdrawing abilities of the substituents and the catalytic activities of MPc-X. The weak-EDG/-EWG substitution enhances whereas the strong-EDG/-EWG substitution mostly lowers the CO selectivity of MPc. Experimental and calculation results demonstrate that the electronic properties of the substituents influence the symmetry and energy of the highest occupied molecular orbitals of MPc-X, which in turn determine the CO2 adsorption/activation and lead to diverse CO2 reduction pathways on the EWG or EDG substituted MPc via different CO2 adsorption modes. This work provides mechanism insights that could be guidance for the design and regulation of molecular catalysts.

Integration of Cobalt Phthalocyanine, Acetylene Black and Cu2 O Nanocubes for Efficient Electroreduction of CO2 to C2 H4

Suppressing side reactions and simultaneously enriching key intermediates during CO2 reduction reaction (CO2 RR) has been a challenge. Here, we propose a tandem catalyst (Cu2 O NCs-C-Copc) consisting of acetylene black, cobalt phthalocyanine (Copc) and cuprous oxide nanocubes (Cu2 O NCs) for efficient CO2 -to-ethylene conversion. Density-functional theory (DFT) calculation combined with experimental verification demonstrated that Copc can provide abundant CO to nearby copper sites while acetylene black successfully reduces the formation energies of key intermediates, leading to enhanced C2 H4 selectivity. X-ray photoelectron spectroscopy (XPS) and potentiostatic tests indicated that the catalytic stability of Cu2 O NCs-C-Copc was significantly enhanced compared with Cu2 O NCs. Finally, the industrial application prospect of the catalyst was evaluated using gas diffusion electrolyzers. TheF E C 2 H 4 ${{\rm { F}}{{\rm { E}}}_{{{\rm { C}}}_{{\rm { 2}}}{{\rm { H}}}_{{\rm { 4}}}}}$ of Cu2 O NCs-C-Copc can reach to 58.4 % at -1.1 V vs. RHE in 0.1 M KHCO3 and 70.3 % at -0.76 V vs. RHE in 1.0 M KOH. This study sheds new light on the design and development of highly efficient CO2 RR tandem catalytic systems.

Porosity as a Design Element for Developing Catalytic Molecular Materials for Electrochemical and Photochemical Carbon Dioxide Reduction

The catalytic reduction of carbon dioxide (CO2 ) using sustainable energy inputs is a promising strategy for upcycling of atmospheric carbon into value-added chemical products. This goal has inspired the development of catalysts for selective and efficient CO2 conversion using electrochemical and photochemical methods. Among the diverse array of catalyst systems designed for this purpose, 2D and 3D platforms that feature porosity offer the potential to combine carbon capture and conversion. Included are covalent organic frameworks (COFs), metal-organic frameworks (MOFs), porous molecular cages, and other hybrid molecular materials developed to increase active site exposure, stability, and water compatibility while maintaining precise molecular tunability. This mini-review showcases catalysts for the CO2 reduction reaction (CO2 RR) that incorporate well-defined molecular elements integrated into porous materials structures. Selected examples provide insights into how different approaches to this overall design strategy can augment their electrocatalytic and/or photocatalytic CO2 reduction activity.

Surface passivation for highly active, selective, stable, and scalable CO2 electroreduction

Electrochemical conversion of CO2 to formic acid using Bismuth catalysts is one the most promising pathways for industrialization. However, it is still difficult to achieve high formic acid production at wide voltage intervals and industrial current densities because the Bi catalysts are often poisoned by oxygenated species. Herein, we report a Bi3S2 nanowire-ascorbic acid hybrid catalyst that simultaneously improves formic acid selectivity, activity, and stability at high applied voltages. Specifically, a more than 95% faraday efficiency was achieved for the formate formation over a wide potential range above 1.0 V and at ampere-level current densities. The observed excellent catalytic performance was attributable to a unique reconstruction mechanism to form more defective sites while the ascorbic acid layer further stabilized the defective sites by trapping the poisoning hydroxyl groups. When used in an all-solid-state reactor system, the newly developed catalyst achieved efficient production of pure formic acid over 120 hours at 50 mA cm-2 (200 mA cell current).

Microstructure Design Strategy for Molecularly Dispersed Cobalt Phthalocyanine and Efficient Mass Transport in CO2 Electroreduction

Cobalt phthalocyanine (CoPc) has attracted particular interest owing to its excellent activity during the electrochemical CO₂ conversion to CO. However, the efficient utilization of CoPc at industrially relevant current densities is still a challenge owing to its nonconductive property, agglomeration, and unfavorable conductive substrate design. Here, a microstructure design strategy for dispersing CoPc molecules on a carbon substrate for efficient CO₂ transport during CO₂ electrolysis is proposed and demonstrated. The highly dispersed CoPc is loaded on a macroporous hollow nanocarbon sheet to act as the catalyst (CoPc/CS). The unique interconnected and macroporous structure of the carbon sheet forms a large specific surface area to anchor CoPc with high dispersion and simultaneously boosts the mass transport of reactants in the catalyst layer, significantly improving the electrochemical performance. By employing a zero-gap flow cell, the designed catalyst can mediate CO₂ to CO with a high full-cell energy efficiency of 57% at 200 mA cm^-2 .

Scalable synthesis of coordinatively unsaturated metal-nitrogen sites for large-scale CO2 electrolysis

Practical electrochemical CO₂-to-CO conversion requires a non-precious catalyst to react at high selectivity and high rate. Atomically dispersed, coordinatively unsaturated metal-nitrogen sites have shown great performance in CO₂ electroreduction; however, their controllable and large-scale fabrication still remains a challenge. Herein, we report a general method to fabricate coordinatively unsaturated metal-nitrogen sites doped within carbon nanotubes, among which cobalt single-atom catalysts can mediate efficient CO₂-to-CO formation in a membrane flow configuration, achieving a current density of 200 mA cm^-2 with CO selectivity of 95.4% and high full-cell energy efficiency of 54.1%, outperforming most of CO₂-to-CO conversion electrolyzers. By expanding the cell area to 100 cm², this catalyst sustains a high-current electrolysis at 10 A with 86.8% CO selectivity and the single-pass conversion can reach 40.4% at a high CO₂ flow rate of 150 sccm. This fabrication method can be scaled up with negligible decay in CO₂-to-CO activity. In situ spectroscopy and theoretical results reveal the crucial role of coordinatively unsaturated metal-nitrogen sites, which facilitate CO₂ adsorption and key *COOH intermediate formation.

Catalyst Aggregation Matters for Immobilized Molecular CO2RR Electrocatalysts

Here, we detail how the catalytic behavior of immobilized molecular electrocatalysts for the CO₂ reduction reaction (CO₂RR) can be impacted by catalyst aggregation. Operando Raman spectroscopy was used to study the CO₂RR mediated by a layer of cobalt phthalocyanine (CoPc) immobilized on the cathode of an electrochemical flow reactor. We demonstrate that during electrolysis, the oxidation state of CoPc in the catalyst layer is dependent upon the degree of catalyst aggregation. Our data indicate that immobilized molecular catalysts must be dispersed on conductive supports to mitigate the formation of aggregates and produce meaningful performance data. We leveraged insights from this mechanistic study to engineer an improved CO-forming immobilized molecular catalyst─cobalt octaethoxyphthalocyanine (EtO₈-CoPc)─that exhibited high selectivity (FE_CO ≥ 95%), high partial current density (J_CO ≥ 300 mA/cm²), and high durability (ΔFE_CO < 0.1%/h at 150 mA/cm²) in a flow cell. This work demonstrates how to accurately identify CO₂RR active species of molecular catalysts using operando Raman spectroscopy and how to use this information to implement improved molecular electrocatalysts into flow cells. This work also shows that the active site of CoPc during CO₂RR catalysis in a flow cell is the metal center.

Bio-Inspired Bimetallic Cooperativity Through a Hydrogen Bonding Spacer in CO2 Reduction

At the core of carbon monoxide dehydrogenase (CODH) active site two metal ions together with hydrogen bonding scheme from amino acids orchestrate the interconversion between CO₂ and CO. We have designed a molecular catalyst implementing a bimetallic iron complex with an embarked second coordination sphere with multi-point hydrogen-bonding interactions. We found that, when immobilized on carbon paper electrode, the dinuclear catalyst enhances up to four fold the heterogeneous CO₂ reduction to CO in water with an improved selectivity and stability compared to the mononuclear analogue. Interestingly, quasi-identical catalytic performances are obtained when one of the two iron centers was replaced by a redox inactive Zn metal, questioning the cooperative action of the two metals. Snapshots of X-ray structures indicate that the two metalloporphyrin units tethered by a urea group is a good compromise between rigidity and flexibility to accommodate CO₂ capture, activation, and reduction.

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal-organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from -0.6 V to -1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.

Synergistic Effect in a Metal-Organic Framework Boosting the Electrochemical CO2 Overall Splitting

It is a very important but still challenging task to develop bifunctional electrocatalysts for highly efficient CO₂ overall splitting. Herein, we report a stable metal-organic framework (denoted as PcNi-Co-O), composed of (2,3,9,10,16,17,23,24-octahydroxyphthalocyaninato)nickel(II) (PcNi-(O^-)₈) ligands and the planar CoO₄ nodes, for CO₂ overall splitting. When working as both cathode and anode catalysts (i.e., PcNi-Co-O||PcNi-Co-O), PcNi-Co-O achieved a commercial-scale current density of 123 mA cm^-2 (much higher than the reported values (0.2-12 mA cm^-2)) with a Faradic efficiency (CO) of 98% at a low cell voltage of 4.4 V. Mechanism studies suggested the synergistic effects between two active sites, namely, (i) electron transfer from CoO₄ to PcNi sites under electric fields, resulting in the raised oxidizability/reducibility of CoO₄/PcNi sites, respectively; (ii) the energy-level matching of cathode and anode catalysts can reduce the energy barrier of electron transfer between them and improve the performance of CO₂ overall splitting.

Deciphering the Selectivity of the Electrochemical CO2 Reduction to CO by a Cobalt Porphyrin Catalyst in Neutral Aqueous Solution: Insights from DFT Calculations

Density functional theory (DFT) calculations were conducted to investigate the cobalt porphyrin-catalyzed electro-reduction of CO2 to CO in an aqueous solution. The results suggest that CoII -porphyrin (CoII -L) undertakes a ligand-based reduction to generate the active species CoII -L⋅- , where the CoII center antiferromagnetically interacts with the ligand radical anion. CoII -L⋅- then performs a nucleophilic attack on CO2 , followed by protonation and a reduction to give CoII -L-COOH. An intermolecular proton transfer leads to the heterolytic cleavage of the C-O bond, producing intermediate CoII -L-CO. Subsequently, CO is released from CoII -L-CO, and CoII -L is regenerated to catalyze the next cycle. The rate-determining step of this CO2 RR is the nucleophilic attack on CO2 by CoII -L⋅- , with a total barrier of 20.7 kcal mol-1 . The competing hydrogen evolution reaction is associated with a higher total barrier. A computational investigation regarding the substituent effects of the catalyst indicates that the CoPor-R3 complex is likely to display the highest activity and selectivity as a molecular catalyst.

Two Novel Schiff Base Manganese Complexes as Bifunctional Electrocatalysts for CO2 Reduction and Water Oxidation

One mononuclear Mn(III) complex [Mn^IIIL(H₂O)(MeCN)](ClO₄) (1) and one hetero-binuclear complex [(Cu^IILMn^II(H₂O)₃)(Cu^IIL)₂](ClO₄)₂·CH₃OH (2) have been synthesized with the Schiff base ligand (H₂L = N,N'-bis(3-methoxysalicylidene)-1,2-phenylenediamine). Single crystal X-ray structural analysis manifests that the Mn(III) ion in 1 has an octahedral coordination structure, whereas the Mn(II) ion in 2 possesses a trigonal bipyramidal configuration and the Cu(II) ion in 2 is four-coordinated with a square-planar geometry. Electrochimerical catalytic investigation demonstrates that the two complexes can electrochemically catalyze water oxidation and CO₂ reduction simultaneously. The coordination environments of the Mn(III), Mn(II), and Cu(II) ions in 1 and 2 were provided by the Schiff base ligand (L) and labile solvent molecules. The coordinately unsaturated environment of the Cu(II) center in 2 can perfectly facilitate the catalytic performance of 2. Complexes 1 and 2 display that the over potentials for water oxidation are 728 mV and 216 mV, faradaic efficiencies (FEs) are 88% and 92%, respectively, as well as the turnover frequency (TOF) values for the catalytic reduction of CO₂ to CO are 0.38 s^-1 at -1.65 V and 15.97 s^-1 at -1.60 V, respectively. Complex 2 shows much better catalytic performance for both water oxidation and CO₂ reduction than that of complex 1, which could be owing to a structural reason which is attributed to the synergistic catalytic action of the neighboring Mn(III) and Cu(II) active sites in 2. Complexes 1 and 2 are the first two compounds coordinated with Schiff base ligand for both water oxidation and CO₂ reduction. The finding in this work can offer significant inspiration for the future development of electrocatalysis in this area.

Electrochemical organic reactions: A tutorial review

Although the core of electrochemistry involves simple oxidation and reduction reactions, it can be complicated in real electrochemical organic reactions. The principles used in electrochemical reactions have been derived using physical organic chemistry, which drives other organic/inorganic reactions. This review mainly comprises two themes: the first discusses the factors that help optimize an electrochemical reaction, including electrodes, supporting electrolytes, and electrochemical cell design, and the second outlines studies conducted in the field over a period of 10 years. Electrochemical reactions can be used as a versatile tool for synthetically important reactions by modifying the constant electrolysis current.

Enhanced peroxidase-like activity of 2(3), 9(10), 16(17), 23(24)-octamethoxyphthalocyanine modified CoFe LDH for a sensor array for reducing substances with catechol structure

Improving the catalytic activity of artificial nanozymes to realize the real-time detection of small molecules becomes an important task. Herein, a highly active nanozyme, 2(3), 9(10), 16(17), 23(24)-octamethoxyphthalocyanine (Pc(OH)₈) modified CoFe LDH microspheres (Pc(OH)₈-CoFe LDH) have been prepared by the two-step hydrothermal method. The 3,3',5,5'-tetramylbenzidine (TMB), a chromogenic substrate, was fast oxidized into blue oxTMB by H₂O₂ in the presence of Pc(OH)₈-CoFe LDH, indicating that Pc(OH)₈-CoFe LDH possesses high peroxidase-like activity rather than pure CoFe LDH. The enhancement peroxidase-like activity of the Pc(OH)₈-CoFe LDH is ascribed to the synergistic action between Pc(OH)₈ and CoFe LDH. Experimental results of radical scavenger and fluorescence probe verify that superoxide radical (•O₂^-) plays an important role during the catalytic reaction. Interestingly, the absorption intensity of reaction system has been enhanced largely, due to adding of the reducing substances containing catechol structure. Based on this, the three reducing substances (dopamine, procyanidin B2, catechins) containing catechol structure were distinguished from other reducing substances without catechol structure. Thus, a colorimetric array has been constructed using reaction time as the sensing element to realize the sensitive and selective recognition of catechol structures at a certain concentration.

Cobalt Phthalocyanine Cross-Linked Polypyrrole for Efficient Electroreduction of Low Concentration CO2 To CO

Immobilizing cobalt phthalocyanine (CoPc) onto the electrode surface is a significant approach to performing efficient electrochemical CO₂ reduction reaction (ECO₂ RR). Herein, sulfylphenoxy decorated CoPc cross-linked polypyrrole is prepared by in situ polymerization on the surface of carbon cloth. The synthesized N-rich catalyst exhibits above 95 % Faradaic efficiency toward CO (FE_CO ) at -0.9 V versus reversible hydrogen electrode (RHE) at least for 10 h in aqueous solution and even enables direct electrolysis at low CO₂ concentrations, being potential for coupling ECO₂ RR with CO₂ capture. This facile in situ polymerization strategy would pave the way for developing efficient and practical electrocatalysis for ECO₂ RR.

Potential- and Buffer-Dependent Selectivity for the Conversion of CO2 to CO by a Cobalt Porphyrin-Peptide Electrocatalyst in Water

A semisynthetic electrocatalyst for carbon dioxide reduction to carbon monoxide in water is reported. Cobalt microperoxidase-11 (CoMP11-Ac) is shown to reduce CO₂ to CO with a turnover number of up to 32,000 and a selectivity of up to 88:5 CO:H₂. Higher selectivity for CO production is favored by a less cathodic applied potential and use of a higher pK _a buffer. A mechanistic hypothesis is presented in which avoiding the formation and protonation of a formal Co(I) species favors CO production. These results demonstrate how tuning reaction conditions impact reactivity toward CO₂ reduction for a biocatalyst previously developed for H₂ production.

Theoretical Study on the Electro-Reduction of Carbon Dioxide to Methanol Catalyzed by Cobalt Phthalocyanine

Density functional theory (DFT) calculations have been conducted to investigate the mechanism of cobalt(II) tetraamino phthalocyanine (CoPc-NH₂) catalyzed electro-reduction of CO₂. Computational results show that the catalytically active species 1 (⁴[Co^II(H₄L)]⁰) is formed by a four-electron-four-proton reduction of the initial catalyst CoPc-NH₂. Complex 1 can attack CO₂ after a one-electron reduction to give a [Co^III-CO₂^2-]^- intermediate, followed by a protonation and a one-electron reduction to give intermediate [Co^II-COOH]^- (4). Complex 4 is then protonated on its hydroxyl group by a carbonic acid to generate the critical species 6 (Co^III-L^•--CO), which can release the carbon monoxide as an intermediate (and also as a product). In parallel, complex 6 can go through a successive four-electron-four-proton reduction to produce the targeted product methanol without forming formaldehyde as an intermediate product. The high-lying π orbital and the low-lying π* orbital of the phthalocyanine endow the redox noninnocent nature of the ligand, which could be a dianion, a radical monoanion, or a radical trianion during the catalysis. The calculated results for the hydrogen evolution reaction indicate a higher energy barrier than the carbon dioxide reduction. This is consistent with the product distribution in the experiments. Additionally, the amino group on the phthalocyanine ligand was found to have a minor effect on the barriers of critical steps, and this accounts for the experimentally observed similar activity for these two catalysts, namely, CoPc-NH₂ and CoPc.

Directional Manipulation of Electron Transfer by Energy Level Engineering for Efficient Cathodic Oxygen Reduction

Electron transfer plays an important role in determining the energy conversion efficiency of energy devices. Nitrogen-coordinated single metal sites (M-N₄) materials as electrocatalysts have exhibited great potential in devices. However, there are still great difficulties in how to directionally manipulate electron transfer in M-N₄ catalysts for higher efficiency. Herein, we demonstrated the mechanism of electron transfer being affected by energy level structure based on classical iron phthalocyanine (FePc) molecule/carbon models and proposed an energy level engineering strategy to manipulate electron transfer, preparing high-performance ORR catalysts. Engineering molecular energy level via modulating FePc molecular structure with nitro induces a strong interfacial electronic coupling and efficient charge transfer from carbon to FePc-β-NO₂ molecule. Consequently, the assembled zinc-air battery exhibits ultrahigh performance which is superior to most of M-N₄ catalysts. Energy level engineering provides a universal approach for directionally manipulating electron transfer, bringing a new concept to design efficient and stable M-N₄ electrocatalyst.

Efficient Electrochemical Reduction of CO2 to Formate in Methanol Solutions by Mn-Functionalized Electrodes in the Presence of Amines

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO₂ in methanol solutions. Six different industrial amines are employed as co‐catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO₂ reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO₂ and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO₂ in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO₂ to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TON_HCOO− of 2.8×10⁴ can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO₂ into liquid fuel.

CO2 Electroreduction over Metallic Oxide, Carbon-Based, and Molecular Catalysts: A Mini-Review of the Current Advances

Electrochemical CO2 reduction reaction (CO2RR) is one of the most challenging targets of current energy research. Multi-electron reduction with proton-coupled reactions is more thermodynamically favorable, leading to diverse product distribution. This requires the design of stable electroactive materials having selective product generation and low overpotentials. In this review, we have explored different CO2RR electrocatalysts in the gas phase and H-cell configurations. Five groups of electrocatalysts ranging from metals and metal oxide, single atom, carbon-based, porphyrins, covalent, metal–organic frameworks, and phthalocyanines-based electrocatalysts have been reviewed. Finally, conclusions and prospects have been elaborated.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Immobilization strategies for porphyrin-based molecular catalysts for the electroreduction of CO2

The ever-growing level of carbon dioxide (CO2) in our atmosphere, is at once a threat and an opportunity. The development of sustainable and cost-effective pathways to convert CO2 to value-added chemicals is central to reducing its atmospheric presence. Electrochemical CO2 reduction reactions (CO2RRs) driven by renewable electricity are among the most promising techniques to utilize this abundant resource; however, in order to reach a system viable for industrial implementation, continued improvements to the design of electrocatalysts is essential to improve the economic prospects of the technology. This review summarizes recent developments in heterogeneous porphyrin-based electrocatalysts for CO2 capture and conversion. We specifically discuss the various chemical modifications necessary for different immobilization strategies, and how these choices influence catalytic properties. Although a variety of molecular catalysts have been proposed for CO2RRs, the stability and tunability of porphyrin-based catalysts make their use particularly promising in this field. We discuss the current challenges facing CO2RRs using these catalysts and our own solutions that have been pursued to address these hurdles.

Cobalt Phthalocyanine Supported on Mesoporous CeO2 as an Active Molecular Catalyst for CO Oxidation

Heterogenization of biomolecules by immobilizing on a metal oxide support could greatly enhance their catalytic activity and stability, but their interactions are generally weak. Herein, cobalt phthalocyanine (CoPc) molecules were firmly anchored on a Ce-based metal-organic framework (Ce-BTC) due to π-π stacking interaction between CoPc and aromatic frameworks of the BTC linker, which was followed by a calcination treatment to convert Ce-BTC to mesoporous CeO₂ and realize a molecular-level dispersion of CoPc on the surface of CeO₂. Various characterization results confirm the successful fabrication of molecular-based CoPc/CeO₂ catalysts which exhibited good CO oxidation performance. Importantly, we found that the mixing manner of Ce-BTC and CoPc remarkably affects the physicochemical properties which then determined the catalytic performance of the resultant CoPc/CeO₂ catalysts. In contrast, the direct physical mixing of CoPc and CeO₂ led to poor performance toward CO oxidation, manifesting that the Ce-BTC-mediated CoPc loading strategy is promising for the heterogenization of catalytic biomolecules.

Understanding the local chemical environment of bioelectrocatalysis

Bioelectrochemistry employs an array of high-surface-area meso- and macroporous electrode architectures to increase protein loading and the electrochemical current response. While the local chemical environment has been studied in small-molecule and heterogenous electrocatalysis, conditions in enzyme electrochemistry are still commonly established based on bulk solution assays, without appropriate consideration of the nonequilibrium conditions of the confined electrode space. Here, we apply electrochemical and computational techniques to explore the local environment of fuel-producing oxidoreductases within porous electrode architectures. This improved understanding of the local environment enabled simple manipulation of the electrolyte solution by adjusting the bulk pH and buffer pKa to achieve an optimum local pH for maximal activity of the immobilized enzyme. When applied to macroporous inverse opal electrodes, the benefits of higher loading and increased mass transport were employed, and, consequently, the electrolyte adjusted to reach −8.0 mA ⋅ cm−2 for the H2 evolution reaction and −3.6 mA ⋅ cm−2 for the CO2 reduction reaction (CO2RR), demonstrating an 18-fold improvement on previously reported enzymatic CO2RR systems. This research emphasizes the critical importance of understanding the confined enzymatic chemical environment, thus expanding the known capabilities of enzyme bioelectrocatalysis. These considerations and insights can be directly applied to both bio(photo)electrochemical fuel and chemical synthesis, as well as enzymatic fuel cells, to significantly improve the fundamental understanding of the enzyme–electrode interface as well as device performance.

Efficacious CO2 Adsorption and Activation on Ag Nanoparticles/CuO Mesoporous Nanosheets Heterostructure for CO2 Electroreduction to CO

It is an ongoing pursuit for researchers to precisely control the catalyst's surface for high-performance CO₂ electrochemical reduction (CO₂ER). In this work, CuO mesoporous nanosheets (CuO MNSs) with rough edges decorated by small Ag nanoparticles (Ag NPs) with a tunable amount of Ag were synthesized on a Cu foil at normal atmospheric temperature through two-step solution-phase reactions for CO₂ER to CO. In this special Ag NPs/CuO MNSs heterostructure, the mesoporous CuO NSs with rough edges favored gas infiltration, while decorated Ag NPs expanded the active sites for CO₂ molecule adsorption. Ag NPs endowed Ag NPs/CuO MNSs with good electrical conductivity and promoted the adsorbed CO₂ molecules to obtain electrons from the catalyst. Especially, the Ag-CuO interface stabilized the *COOH intermediate with strong bonding, which is important in boosting CO₂ER to CO. The optimal Ag_1.01%/CuO can catalyze CO₂ER to CO with a Faradaic efficiency of 91.2% and a partial current density of 10.5 mA cm^-2 at -0.7 V. Moreover, it exhibited prominent catalytic stability, retaining 97.8% of the initial current density and 97.6% of the original Faradaic efficiency for CO after 12 h of testing at -0.7 V. Notably, the Faradaic efficiency of CO on Ag_1.01%/CuO can retain over 80% in the potential area from -0.6 to -0.9 V, embodying its high selectivity for CO. This work develops precious metal/metal oxide heterostructures with a low precious metal loading for efficacious CO₂ER to CO and beyond.

Recent advances in electrocatalysis with phthalocyanines

Applications of phthalocyanines (Pcs) in electrocatalysis-including the oxygen reduction reaction (ORR), the carbon dioxide reduction reaction (CO₂RR), the oxygen evolution reaction (OER), and the hydrogen evolution reaction (HER)-have attracted considerable attention recently. Pcs and their derivatives are more attractive than many other macrocycles as electrocatalysts since, although they are structurally related to natural porphyrin complexes, they offer the advantages of low cost, facile synthesis and good chemical stability. Moreover, their high tailorability and structural diversity mean Pcs have great potential for application in electrochemical devices. Here we review the structure and composition of Pcs, methods of synthesis of Pcs and their analogues, as well as applications of Pc-based heterogeneous electrocatalysts. Optimization strategies for Pc-based materials for electrocatalysis of ORR, CO₂RR, OER and HER are proposed, based on the mechanisms of the different electrochemical reactions. We also discuss the structure/composition-catalytic activity relationships for different Pc materials and Pc-based electrocatalysts in order to identify future practical applications. Finally, future opportunities and challenges in the use of molecular Pcs and Pc derivatives as electrocatalysts are discussed.

Wetting-regulated gas-involving (photo)electrocatalysis: biomimetics in energy conversion

(Photo)electrolysis of water or gases with water to species serving as industrial feedstocks and energy carriers, such as hydrogen, ammonia, ethylene, propanol, etc., has drawn tremendous attention. Moreover, these processes can often be driven by renewable energy under ambient conditions as a sustainable alternative to traditional high-temperature and high-pressure synthesis methods. In addition to the extensive studies on catalyst development, increasing attention has been paid to the regulation of gas transport/diffusion behaviors during gas-involving (photo)electrocatalytic reactions towards the goal of creating industrially viable catalytic systems with high reaction rates, excellent long-term stabilities and near-unity selectivities. Biomimetic surfaces and systems with special wetting capabilities and structural advantages can shed light on the future design of (photo)electrodes and address long-standing challenges. This article is dedicated to bridging the fields of wetting and catalysis by reviewing the cutting-edge design methodologies of both gas-evolving and gas-consuming (photo)electrocatalytic systems. We first introduce the fundamentals of various in-air/underwater wetting states and their corresponding bioinspired structural properties. The relationship amongst the bubble transport behavior, wettability, and porosity/tortuosity is also discussed. Next, the latest implementations of wetting-related design principles for gas-evolving reactions (i.e. the hydrogen evolution reaction and oxygen evolution reaction) and gas-consuming reactions (i.e. the oxygen reduction reaction and CO2 reduction reaction) are summarized. For photoelectrode designs, additional factors are taken into account, such as light absorption and the separation, transport and recombination of photoinduced electrons and holes. The influences of wettability and 3D structuring of (photo)electrodes on the catalytic activity, stability and selectivity are analyzed to reveal the underlying mechanisms. Finally, remaining questions and related future perspectives are outlined.

Boosting CO2 Electroreduction via the Synergistic Effect of Tuning Cationic Clusters and Visible-Light Irradiation

Introducing an external light field can increase the intrinsic activity and energy efficiency for electrochemical CO₂ reduction. Herein, a synergistic strategy that introduces photosensitive components and visible light into a stable system is reported to improve the performance for CO₂ reduction. The catalytic kinetics studies indicate that the synergistic effect of implantation of cationic Ti and additional light driving is the primary responsibility for accelerating the first electron transfer to form a *COO^- intermediate. This leads to a satisfactory CO₂ -to-CO conversion for Zr/Ti-NB-Co in terms of high selectivity (Faradaic efficiency of 93.6% at -0.7 V), remarkable catalytic activity (production rate up to 546 mmol g^-1 h^-1 at -1.1 V), excellent long-term stability (without performance decay over 11 h), and large turnover frequency of 1028 h^-1 at -1.1 V under visible light. These results imply that the photodriven Ti-based porphyrin catalyst not only can deliver more electrons, but also can act as a photoswitch to adjust the electron transfer pathway.

Intrinsic Defect-Rich Graphene Coupled Cobalt Phthalocyanine for Robust Electrochemical Reduction of Carbon Dioxide

Carbon-based matrix is known to exert a profound influence on the stability and activity of a supported molecular catalyst for electrochemical CO₂ reduction reaction (eCO₂RR), while regulating the interfacial π-π interaction by designing functional species on the carbon matrix has seldom been explored. Herein, promoted π electron transfer between a graphene substrate and cobalt phthalocyanine (CoPc) is achieved by introducing abundant intrinsic defects into graphene (DrGO), which not only generates more electrochemically active Co sites and leads to a positive shift of the Co²⁺/Co⁺ reduction potential but also enhances the CO₂ chemical adsorption. Consequently, as compared to the defect-free counterpart rGO-CoPc, DrGO-CoPc could yield CO with a Faradaic efficiency (FE_CO) higher than 85% in a wide potential range from -0.53 to -0.88 V, and the largest FE_CO and partial CO current density (J_CO) achieve 90.2% and 73.9 mA cm^-2, respectively. More importantly, both FE_CO and J_CO can be dramatically improved when conducting eCO₂RR in an ionic liquid-based electrolyte, for which FE_CO is higher than 90.0% in a wide potential range of 600 mV, with the peak J_CO of up to 113.6 mA cm^-2 in an H-type cell. The excellent eCO₂RR performance of DrGO-CoPc rates itself as one of the best immobilized molecular catalysts.

Carbon-Supported Single Metal Site Catalysts for Electrochemical CO2 Reduction to CO and Beyond

The electrochemical CO₂ reduction reaction (CO₂ RR) is a promising strategy to achieve electrical-to-chemical energy storage while closing the global carbon cycle. The carbon-supported single-atom catalysts (SACs) have great potential for electrochemical CO₂ RR due to their high efficiency and low cost. The metal centers' performance is related to the local coordination environment and the long-range electronic intercalation from the carbon substrates. This review summarizes the recent progress on the synthesis of carbon-supported SACs and their application toward electrocatalytic CO₂ reduction to CO and other C₁ and C₂ products. Several SACs are involved, including MN_x catalysts, heterogeneous molecular catalysts, and the covalent organic framework (COF) based SACs. The controllable synthesis methods for anchoring single-atom sites on different carbon supports are introduced, focusing on the influence that precursors and synthetic conditions have on the final structure of SACs. For the CO₂ RR performance, the intrinsic activity difference of various metal centers and the corresponding activity enhancement strategies via the modulation of the metal centers' electronic structure are systematically summarized, which may help promote the rational design of active and selective SACs for CO₂ reduction to CO and beyond.