Room-Temperature CO Oxidation Catalyst: Low-Temperature Metal–Support Interaction between Platinum Nanoparticles and Nanosized Ceria

Two decades of ceria nanoparticle research: structure, properties and emerging applications

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Enhanced Catalytic Oxidation Reactivity over Atomically Dispersed Pt/CeO2 Catalysts by CO Activation

The elevation of the low-temperature oxidation activity for Pt/CeO2 catalysts is challenging to meet the increasingly stringent requirements for effectively eliminating carbon monoxide (CO) from automobile exhaust. Although reducing activation is a facile strategy for boosting reactivity, past research has mainly concentrated on applying H2 as the reductant, ignoring the reduction capabilities of CO itself, a prevalent component of automobile exhaust. Herein, atomically dispersed Pt/CeO2 was fabricated and activated by CO, which could lower the 90% conversion temperature (T90) by 256 °C and achieve a 20-fold higher CO consumption rate at 200 °C. The activated Pt/CeO2 catalysts showed exceptional catalytic oxidation activity and robust hydrothermal stability under the simulated working conditions for gasoline or diesel exhausts. Characterization results illustrated that the CO activation triggered the formation of a large portion of Pt0 terrace sites, acting as inherent active sites for CO oxidation. Besides, CO activation weakened the Pt-O-Ce bond strength to generate a surface oxygen vacancy (Vo). It served as the oxygen reservoir to store the dissociated oxygen and convert it into active dioxygen intermediates. Conversely, H2 activation failed to stimulate Vo, but triggered a deactivating transformation of the Pt nanocluster into inactive PtxOy in the presence of oxygen. The present work offers coherent insight into the upsurging effect of CO activation on Pt/CeO2, aiming to set up a valuable avenue in elevating the efficiency of eliminating CO, C3H6, and NH3 from automobile exhaust.

Highly Active Oxidation Catalysts through Confining Pd Clusters on CeO2 Nano-Islands

CeO2-supported noble metal clusters are attractive catalytic materials for several applications. However, their atomic dispersion under oxidizing reaction conditions often leads to catalyst deactivation. In this study, the noble metal cluster formation threshold is rationally adjusted by using a mixed CeO2-Al2O3 support. The preferential location of Pd on CeO2 islands leads to a high local surface noble metal concentration and promotes the in situ formation of small Pd clusters at a rather low noble metal loading (0.5 wt %), which are shown to be the active species for CO conversion at low temperatures. As elucidated by complementary in situ/operando techniques, the spatial separation of CeO2 islands on Al2O3 confines the mobility of Pd, preventing the full redispersion or the formation of larger noble metal particles and maintaining a high CO oxidation activity at low temperatures. In a broader perspective, this approach to more efficiently use the noble metal can be transferred to further systems and reactions in heterogeneous catalysis.

Catalytic reactions of oxalic acid degradation with Pt/SiO2 as a catalyst in nitric acid solutions

Large quantities of solutions containing oxalic acid and nitric acid are produced from nuclear fuel reprocessing, but oxalic acid must be removed before nitric acid and plutonium ions can be recovered in these solutions. The degradation of oxalic acid with Pt/SiO₂ as a catalyst in nitric acid solutions has the characteristics of a fast and stable reaction, recyclable catalyst, and no introduction of impurity ions into the system. This method is one of the preferred alternatives to the currently used reaction of KMnO₄ with oxalic acid but lacks theoretical support. Therefore, this study attempts to clarify the reaction mechanism of the method. First, there was no induction period for this catalytic reaction, and no evidence was found that the nitrous acid produced in the solution could have an effect on oxalic acid degradation. Furthermore, oxidation intermediates (structures of Pt-O) were formed through this reaction between NO₃^- adsorbed on the active sites and Pt on the catalyst surface, but H⁺ greatly promoted the reaction. Additionally, oxalic acid degradation through the oxidative dehydrogenation reaction occurred between oxalic acid molecules (HOOC-COOH) and Pt-O, with ·OOC-COOH, which is easily self-decomposable especially in acidic solution, generated simultaneously, and finally CO₂ was produced.

Activating lattice oxygen of single-layer ZnO for the catalytic oxidation reaction

Tuning an oxide/metal interface is of critical importance for the performance enhancement of many heterogeneous catalytic reactions. However, catalytic oxidation occurring at the interface between non-reducible oxide and metal has been challenging, since non-reducible oxides hardly lose their lattice oxygen (O_L) or dissociate O₂ from the gas phase. In this work, a ZnO monolayer film on Au(111) is used as an inverse catalyst to investigate CO oxidation occurring at the ZnO/Au(111) interface via high pressure scanning tunneling microscopy. Surface science experiments indicate that oxygen intercalation under the ZnO monolayer film, termed ZnO/O/Au(111), can be achieved via a surface reaction with 1 × 10^-6 mbar O₃. Subsequent exposure of the formed ZnO/O/Au(111) surface to mbar CO at room temperature leads to the recovery of the pristine ZnO/Au(111) surface. Theoretical calculations reveal that O_L adjacent to intercalated oxygen (O_int) is activated due to the O_L-Zn-O_int bonding and surface corrugation, which can be directly involved in CO oxidation. Subsequently, O_int migrates to the formed oxygen vacancy from the subsurface resuming the pristine ZnO structure. These results thus reveal that oxygen intercalation underneath single-layer ZnO will strongly boost the oxidation reaction via activating adjacent lattice oxygen atoms.

Fabricating Robust Pt Clusters on Sn-Doped CeO2 for CO Oxidation: A Deep Insight into Support Engineering and Surface Structural Evolution

The size effect on nanoparticles, which affects the catalysis performance in a significant way, is crucial. The tuning of oxygen vacancies on metal-oxide support can help reduce the size of the particles in active clusters of Pt, thus improving catalysis performance of the supported catalyst. Herein, Ce-Sn solid solutions (CSO) with abundant oxygen vacancies have been synthesized. Activated by simple CO reduction after loading Pt species, the catalytic CO oxidation performance of Pt/CSO was significantly better than that of Pt/CeO₂ . The reasons for the elevated activity were further explored regarding ionic Pt single sites being transformed into active Pt clusters after CO reduction. Due to more exposed oxygen vacancies, much smaller Pt clusters were created on CSO (ca. 1.2 nm) than on CeO₂ (ca. 1.8 nm). Consequently, more exposed active Pt clusters significantly improved the ability to activate oxygen and directly translated to the higher catalytic oxidation performance of activated Pt/CSO catalysts in vehicle emission control applications.

Modulating the Coordination of Single Co Atoms to Trigger the Catalytic Oxidation of Formaldehyde at Room Temperature

Designing efficient and stable non-precious metal catalysts remains a significant challenge for formaldehyde (HCHO) oxidation, which is an expected way to replace the employment of noble-metal catalysts. Herein, a series of atomically dispersed Co catalysts are optimized by evaporating nitrogen atoms and exploring their HCHO oxidation catalytic performance. The results show that the prepared temperature can effectively control the coordination regulation of the Co atomic site, which in turn affects the catalytic oxidation activity. Our best catalyst, the Co-N/C prepared at 1000 °C, exhibits superior activity with 92.8% of conversion at room temperature at a gas hourly space velocity (GHSV) of 72,000 mL·g^-1·h^-1. Extensive characterizations combined with theoretical calculations reveal that the high catalytic activity is attributed to the low-coordinated center, which can be tailored by pyrolysis temperature. This work provides an innovative strategy for catalyst design in the catalytic oxidation reaction.

Activity and Thermal Aging Stability of La1-xSrxMnO3 (x = 0.0, 0.3, 0.5, 0.7) and Ir/La1-xSrxMnO3 Catalysts for CO Oxidation with Excess O2

The catalytic oxidation of CO is probably the most investigated reaction in the literature, for decades, because of its extended environmental and fundamental importance. In this paper, the oxidation of CO on La_1-xSr_xMnO₃ perovskites (LSMx), either unloaded or loaded with dispersed Ir nanoparticles (Ir/LSMx), was studied in the temperature range 100-450 °C under excess O₂ conditions (1% CO + 5% O₂). The perovskites, of the type La_1-xSr_xMnO₃ (x = 0.0, 0.3, 0.5 and 0.7), were prepared by the coprecipitation method. The physicochemical and structural properties of both the LSMx and the homologous Ir/LSMx catalysts were evaluated by various techniques (XRD, N₂ sorption-desorption by BET-BJH, H₂-TPR and H₂-Chem), in order to better understand the structure-activity-stability correlations. The effect of preoxidation/prereduction/aging of the catalysts on their activity and stability was also investigated. Results revealed that both LSMx and Ir/LSMx are effective for CO oxidation, with the latter being superior to the former. In both series of materials, increasing the substitution of La by Sr in the composition of the perovskite resulted to a gradual suppression of their CO oxidation activity when these were prereduced; the opposite was true for preoxidized samples. Inverse hysteresis phenomena in activity were observed during heating/cooling cycles on the prereduced Ir/LSMx catalysts with the loop amplitude narrowing with increasing Sr-content in LSMx. Oxidative thermal sintering experiments at high temperatures revealed excellent antisintering behavior of Ir nanoparticles supported on LSMx, resulting from perovskite's favorable antisintering properties of high oxygen storage capacity and surface oxygen vacancies.

In Situ Spectroscopy and Microscopy Insights into the CO Oxidation Mechanism on Au/CeO2(111)

In this work, we prepared and investigated in ultra-high vacuum (UHV) two stoichiometric CeO₂(111) surfaces containing low and high amounts of step edges decorated with 0.05 ML of gold using synchrotron-radiation photoelectron spectroscopy (SRPES) and scanning tunneling microscopy (STM). The UHV study helped to solve the still unresolved puzzle on how the one-monolayer-high ceria step edges affect the metal-substrate interaction between Au and the CeO₂(111) surface. It was found that the concentration of ionic Au⁺ species on the ceria surface increases with increasing number of ceria step edges and is not correlated with the concentration of Ce³⁺ ions that are supposed to form on the surface after its interaction with gold nanoparticles. We associated this with an additional channel of Au⁺ formation on the surface of CeO₂(111) related to the interaction of Au atoms with various peroxo oxygen species formed at the ceria step edges during the film growth. The study of CO oxidation on the highly stepped Au/CeO₂(111) model sample was performed by combining near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), UHV-STM, and near-ambient-pressure STM (NAP-STM). This powerful combination provided comprehensive information on the processes occurring on the Au/CeO₂(111) surface during the interaction with CO, O₂, and CO + O₂ (1:1) mixture at conditions close to the real working conditions of CO oxidation. It was found that the system demonstrates high stability in CO. However, the surface undergoes substantial chemical and morphological changes as the O₂ is added to the reaction cell. Already at 300 K, gold nanoparticles begin to grow using a mechanism that involves the disintegration of small gold nanoparticles in favor of the large ones. With increasing temperature, the model catalyst quickly transforms into a system of primarily large Au particles that contains no ionic gold species.

Photocatalytic Oxidation of Carbon Monoxide Using Synergy of Redox-Separated Photocatalyst and Ozone

Separating the redox centers of photocatalysts is the most promising strategy to enhance photocatalytic oxidation efficiency. Herein, I investigate a site-selective loading of Pt on facet-engineered TiO₂ to achieve carbon monoxide (CO) oxidation at room temperature. Spatially loaded Pt on {101} facets of TiO₂ attracts photoinduced electrons efficiently. Thereby, oxygen dissociation is facilitated on the Pt surface, which is confirmed by enhanced oxidation of CO by 2.4 times compared to the benchmark of Pt/TiO₂. The remaining holes on TiO₂ can be utilized for the oxidation of various gaseous pollutants. Specifically, gaseous ozone, which is present in indoor and ambient air, is converted to a hydroxyl radical by reacting with the hole; thus, the poisoned Pt surface is continuously cleaned during the CO oxidation, as confirmed by in situ diffuse reflectance infrared transform spectroscopy. While randomly loaded Pt can act as recombination center, reducing photocatalytic activity, redox-separated photocatalyst enhances charge separation, boosting CO oxidation and catalyst regeneration via simultaneous ozone decomposition.

Understanding and application of metal-support interactions in catalysts for CO-PROX

Preferential oxidation of carbon monoxide (CO-PROX) plays a vital role in H₂ purification in the upstream systems of proton exchange membrane fuel cells (PEMFCs) for its high efficiency, low cost and practicability. The key to the application of CO-PROX is the design and preparation of catalysts, and the supported metal catalysts have been the mainstay after decades of development. The metal-support interaction (MSI), which acts as a bridge between the design of supported catalysts and atomic-level theoretical research, has triggered increasing attention. There is a growing body of literature that recognizes the importance of the MSI in heterogeneous catalysis. In this review, the impacts of the MSI including strong metal-support interactions and electronic metal-support interactions on the essential characteristics of supported single atom, nanocluster and nanoparticle catalysts, and therefore, on catalytic behaviors were discussed, respectively, primarily focusing on electron transfer, chemical bonding and the encapsulation of active sites induced by the MSI. We also presented an overview of how the MSI can be utilized to rationally design catalysts to meet target requirements such as high activity, selectivity or stability via appropriate selection and modification of support and active species. The perspectives of the future development for comprehensive understanding of the MSI were also proposed.

Room-Temperature Synthesis of 1,3,5-Tri(het)aryl Benzene from Nitroalkenes Using Pd(OAc)2: Complete Mechanistic and Theoretical Studies

Herein, a room-temperature catalytic pathway for 1,3,5-tri(het)aryl derivatives from nitroalkenes using simple Pd(OAc)₂ is presented. This newly developed C-C bond-forming methodology takes place in a cascade manner with the initial pallado-Morita-Baylis-Hillman (MBH) type adduct. The broad substrate scopes, functional group tolerance, and different aryl-substituted benzene derivatives make this methodology more attractive. Furthermore, the mechanistic understanding through isolation of intermediates and DFT studies of the catalytic cycle provide requisite insight into the methodology.

Coupling of photocatalysis and catalysis using an optical fiber textile for room temperature depollution

Herein, we investigate the interplay between a photocatalyst (TiO₂) and a catalyst (Pt/TiO₂ and Pt/CeO₂) for the oxidation of formaldehyde and toluene at room temperature. A luminous textile is used as support and as light source for the photocatalyst. Our results indicate that the presence of the catalyst and the photocatalyst increases the catalytic performance for the oxidation of formaldehyde, while the photocatalytic performance for toluene oxidation decreases. The overall performance (toluene and formaldehyde degradation) of the system can be optimized with respect to the choice of support for the catalyst (e.g. TiO₂ or CeO₂), the quantity of Pt used, and the ratio between the catalyst and photocatalyst. In addition, different configurations of the photocatalyst and the catalyst on the textile are studied: under leaching and flow-through gas streams, catalyst and photocatalyst deposition on the same and opposite site of the textile are tested. The performance of the system can be optimized by adapting a configuration where the gas stream goes through the textile, while the deposition side of the catalyst and/or photocatalyst with respect to the gas stream is of minor importance.

Flower-like Co3O4 Catalysts for Efficient Catalytic Oxidation of Multi-Pollutants from Diesel Exhaust

Nowadays, the oxidation activity at the low-temperature regime for Co3O4 catalysts needs to be improved to meet the stringent regulation of multi-pollutant diesel exhaust. Herein, nanoflower-like Co3O4 diesel oxide catalysts (DOCs) were fabricated with the addition of a low-content Pt to trigger better catalytic activities for oxidizing multi-pollutants (CO, C3H6, and NO) emissions by taking advantage of the strong-metal supporting interaction. Compared to the conventional DOCs based on Pt/Al2O3, the as-synthesized Pt/Co3O4 catalysts not only exhibited better multi-pollutants oxidation activities at the low temperature but also obtained better resistance toward NO inhibition. Moreover, Pt/Co3O4 catalysts showed exceptional hydrothermal durability throughout long-term tests in the presence of water vapor. According to the XPS and H2-TPR results, Pt promoted low-temperature catalytic activity by increasing the active surface oxygen species and reducibility due to the robust synergistic interaction between metallic Pt and supporting Co3O4. Meanwhile, TGA curves confirmed the Pt atoms that facilitated the desorption of surface-active oxygen and hydroxyl radicals in a low-temperature regime. Furthermore, instead of probing the intermediates during CO and C3H6 oxidation for Pt/Co3O4 catalysts, which included carbonates, formate, and acetate species, in situ DRIFTs experiments also revealed C3H6 oxidation mainly took place over metallic Pt sites.

High Pt-mass activity of PtIV1/β-MnO2 surface for low-temperature oxidation of CO under O2-rich conditions

We successfully developed a PtIV single-atom/β-MnO2 composite metal-oxide surface capable of catalyzing CO oxidation with the record reaction rates of 0.676 and 0.206 molCO h−1 gPt−1 at 25 °C and 0 °C, respectively, under the O2-rich conditions.

Tuning Metal-Support Interaction of Pt-CeO2 Catalysts for Enhanced Oxidation Reactivity

Metal-support interaction (MSI) has been widely recognized to be playing a pivotal role in regulating the catalytic activity of various reactions. In this work, the degree of MSI between Pt and CeO₂ support was finely tuned by adjusting the activation condition, and the obtained catalysts were tested for the oxidative abatement of CO and HCHO under ambient conditions. The characterization of catalysts shows that activation of strongly interacting Pt-CeO₂ at higher temperatures by H₂ leads to a weaker MSI with increased electron density of Pt, and this modification of local electronic properties is demonstrated to result in enhanced O₂ adsorption/activation to prevent the CO self-poisoning effect, while it abates the activity of CO adsorption/activation and oxidation of adsorbed CO. The Pt-CeO₂ catalyst with a moderate MSI, which is able to balance each step in the catalytic cycle over Pt and Pt-CeO₂ interface domains, displays the highest activity for CO/HCHO oxidation under ambient conditions.

Brownmillerites CaFeO2.5 and SrFeO2.5 as Catalyst Support for CO Oxidation

The support material can play an important role in oxidation catalysis, notably for CO oxidation. Here, we study two materials of the Brownmillerite family, CaFeO_2.5 and SrFeO_2.5, as one example of a stoichiometric phase (CaFeO_2.5, CFO) and one existing in different modifications (SrFeO_2.75, SrFeO_2.875 and SrFeO₃, SFO). The two materials are synthesized using two synthesis methods, one bottom-up approach via a complexation route and one top-down method (electric arc fusion), allowing to study the impact of the specific surface area on the oxygen mobility and catalytic performance. CO oxidation on ¹⁸O-exchanged materials shows that oxygen from SFO participates in the reaction as soon as the reaction starts, while for CFO, this onset takes place 185 °C after reaction onset. This indicates that the structure of the support material has an impact on the catalytic performance. We report here on significant differences in the catalytic activity linked to long-term stability of CFO and SFO, which is an important parameter not only for possible applications, but equally to better understand the mechanism of the catalytic activity itself.

Recent advances in catalytic systems in the prism of physicochemical properties to remediate toxic CO pollutants: A state-of-the-art review

Carbon monoxide (CO) is the most harmful pollutant in the air, causing environmental issues and adversely affecting humans and the vegetation and then raises global warming indirectly. CO oxidation is one of the most effective methods of reducing CO by converting it into carbon dioxide (CO₂) using a suitable catalytic system, due to its simplicity and great value for pollution control. The CO oxidation reaction has been widely studied in various applications, including proton-exchange membrane fuel cell technology and catalytic converters. CO oxidation has also been of great academic interest over the last few decades as a model reaction. Many review studies have been produced on catalysts development for CO oxidation, emphasizing noble metal catalysts, the configuration of catalysts, process parameter influence, and the deactivation of catalysts. Nevertheless, there is still some gap in a state of the art knowledge devoted exclusively to synergistic interactions between catalytic activity and physicochemical properties. In an effort to fill this gap, this analysis updates and clarifies innovations for various latest developed catalytic CO oxidation systems with contemporary evaluation and the synergistic relationship between oxygen vacancies, strong metal-support interaction, particle size, metal dispersion, chemical composition acidity/basicity, reducibility, porosity, and surface area. This review study is useful for environmentalists, scientists, and experts working on mitigating the harmful effects of CO on both academic and commercial levels in the research and development sectors.

Efficient catalytic combustion of toluene at low temperature by tailoring surficial Pt0 and interfacial Pt-Al(OH)x species

Exploring highly efficient and low-cost supported Pt catalysts is attractive for the application of volatile organic compounds (VOCs) combustion. Herein, efficient catalytic combustion of toluene at low temperature over Pt/γ-Al₂O₃ catalysts has been demonstrated by tailoring active Pt species spatially. Pt/γ-Al₂O₃ catalyst with low Pt-content (0.26 wt%) containing both interfacial Pt-Al(OH)_x and surficial metallic Pt (Pt⁰) species exhibited super activity and water-resistant stability for toluene oxidation. The strong metal-support interaction located at the Al-OH-Pt interfaces elongated the Pt-O bond and contributed to the oxidation of toluene. Meanwhile, the OH group at the Al-OH-Pt interfaces had the strongest adsorption and activation capability for toluene and the derived intermediate species were subsequently oxidized by oxygen species activated by surficial Pt⁰ to yield carbon dioxide and water. This work initiated an inspiring sight to the design of active Pt species for the VOCs combustion.

Insight into the Crystal Structures and Surface Property of Manganese Oxide on CO Catalytic Oxidation Performance

α-MnO₂ nanorods and flower-like γ-MnO₂ microspheres were synthesized by facile and mild methods to illustrate the effect of crystal structures and surface features on catalytic performance with the help of carbon monoxide (CO) oxidation. It is revealed that the flower-like γ-MnO₂ microspheres possess better catalytic oxidation performance (CO complete conversion temperature at 120 °C and long-time stability for 50 h) than α-MnO₂ nanorods, which can be attributed to the obvious differences in the chemical bonds and linking modes of [MnO₆] octahedra due to the different crystal structures. γ-MnO₂ possesses lower Mn-O bond strength that enables γ-MnO₂ to present a large amount of surface lattice oxygen and superior oxygen mobility. The disordered random intergrowth tunnel structure can adsorb effectively CO molecules, resulting in excellent catalytic performance for CO catalytic oxidation. In addition, the MnO₂ catalyst probably occurred via a Mars-van Krevelen mechanism for CO oxidation. This work provides an insight into the effect of crystal structures and surface property of manganese oxide on catalytic oxidation performance, which presents help for the future design of promising catalysts with excellent catalytic performance.

Synergy between Metallic and Oxidized Pt Sites Unravelled during Room Temperature CO Oxidation on Pt/Ceria

Pt-based materials are widely used as heterogeneous catalysts, in particular for pollutant removal applications. The state of Pt has often been proposed to differ depending on experimental conditions, for example, metallic Pt poisoned with CO being present at lower temperature before light-off, while an oxidized Pt surface prevails above light-off temperature. In stark contrast to all previous reports, we show herein that both metallic and oxidized Pt are present in similar proportions under reaction conditions at the surface of ca. 1 nm nanoparticles showing high activity at 30 °C. The simultaneous presence of metallic and oxidized Pt enables a synergy between these phases. The main role of the metallic Pt phase is to provide strong adsorption sites for CO, while that of oxidized Pt supposedly supplies reactive oxygen. Our results emphasize the complex dual oxidic-metallic nature of supported Pt catalysts and platinum's evolving nature under reaction conditions.

Atomically Dispersed Pt-group Catalysts: Reactivity, Uniformity, Structural Evolution, and Paths to Increased Functionality

The development of experimental and computational tools that give accurate and visual active site descriptions has renewed research interest in atomically dispersed metal catalysts. In this perspective, we describe our approach to synthesizing and understanding atomically dispersed Pt-group metals on oxide supports. Using site-specific characterization, we show that these metal species have distinct reactivity from metal clusters. We argue that producing materials where all metal sites have identical local coordination is key to both accurately assessing catalytic properties and achieving single-site behavior. Methods for assessing site uniformity are considered. We show that producing uniform metal species allows us to describe their structure at the atomic scale and understand how this structure evolves under different conditions. Finally, we suggest pathways to increased functionality for atomically dispersed catalysts, through control of their local coordination and steric environment and through cooperativity with different sites.

Infrared Thermography as a Powerful, Versatile, and Elegant Research Tool in Chemistry: Principles and Application to Catalysis and Adsorption

In this Review, diverse chemical problems that have been approached by means of infrared thermography (IRT) are covered in depth. Moreover, some novel steps forward in this field are made, described and discussed. Namely, the latest-generation IRT performance capabilities are harnessed in full; the initial phase of catalytic CO oxidation (called "fast ignition") is presented at the 0.01 s temporal resolution; at the same resolution, the thermal manifestation of the adsorption-desorption wave propagation after the gaseous reactant pulsed (0.6 s) wetting is exhibited. Furthermore, a radical difference in the thermal behavior of differently calcined γ-Al₂ O₃ supported Au catalysts, which underwent successive H₂ O and CO attacks, is demonstrated, and the generally accepted fact that the catalyst temperature reflects the catalytic activity is validated experimentally. It is shown that latest-generation IRT may serve as unique and highly informative research tool in chemistry.

Synergism of Iron and Platinum Species for Low-Temperature CO Oxidation: From Two-Dimensional Surface to Nanoparticle and Single-Atom Catalysts

CO oxidation is one of the most studied reactions in heterogeneous catalysis. It is present in air cleaning and automotive emission control. It also participates in the removal of CO from streams of hydrogen used in fuel cells. Because of the competitive adsorption of CO and O₂ over active sites, the use of Pt-based catalysts for low-temperature CO oxidation remains a challenge. Recently, great progress has been made with catalysts containing Pt-Fe species because of the contribution of Fe species to O₂ activation. The structure-activity relationship and reaction mechanisms have been investigated with various Pt-Fe catalysts. In this Perspective, we give a summary of the recent advances of low-temperature CO oxidation over Pt-Fe catalysts with a focus on the synergistic effect of Pt and Fe species in the CO and O₂ activation of catalytic reactions. Future prospects for the preparation of highly effective Pt-Fe catalysts are also proposed.

Recent Advances on the Rational Design of Non-Precious Metal Oxide Catalysts Exemplified by CuOx/CeO2 Binary System: Implications of Size, Shape and Electronic Effects on Intrinsic Reactivity and Metal-Support Interactions

Catalysis is an indispensable part of our society, massively involved in numerous energy and environmental applications. Although, noble metals (NMs)-based catalysts are routinely employed in catalysis, their limited resources and high cost hinder the widespread practical application. In this regard, the development of NMs-free metal oxides (MOs) with improved catalytic activity, selectivity and durability is currently one of the main research pillars in the area of heterogeneous catalysis. The present review, involving our recent efforts in the field, aims to provide the latest advances—mainly in the last 10 years—on the rational design of MOs, i.e., the general optimization framework followed to fine-tune non-precious metal oxide sites and their surrounding environment by means of appropriate synthetic and promotional/modification routes, exemplified by CuOx/CeO2 binary system. The fine-tuning of size, shape and electronic/chemical state (e.g., through advanced synthetic routes, special pretreatment protocols, alkali promotion, chemical/structural modification by reduced graphene oxide (rGO)) can exert a profound influence not only to the reactivity of metal sites in its own right, but also to metal-support interfacial activity, offering highly active and stable materials for real-life energy and environmental applications. The main implications of size-, shape- and electronic/chemical-adjustment on the catalytic performance of CuOx/CeO2 binary system during some of the most relevant applications in heterogeneous catalysis, such as CO oxidation, N2O decomposition, preferential oxidation of CO (CO-PROX), water gas shift reaction (WGSR), and CO2 hydrogenation to value-added products, are thoroughly discussed. It is clearly revealed that the rational design and tailoring of NMs-free metal oxides can lead to extremely active composites, with comparable or even superior reactivity than that of NMs-based catalysts. The obtained conclusions could provide rationales and design principles towards the development of cost-effective, highly active NMs-free MOs, paving also the way for the decrease of noble metals content in NMs-based catalysts.