Alkene Hydrosilylation Using Tertiary Silanes with α-Diimine Nickel Catalysts. Redox-Active Ligands Promote a Distinct Mechanistic Pathway from Platinum Catalysts

Hydrogen atom abstraction as a synthetic route to a square planar CoII complex with a redox-active tetradentate PNNP ligand

Redox-active ligands improve the reactivity of transition metal complexes by facilitating redox processes independent of the transition metal center. A tetradentate square planar (PNCH2CH2NP)CoII (1) complex was synthesized and the ethylene backbone was dehydrogenated through hydrogen atom abstraction to afford (PNCHCHNP)CoII (2), which now contains a redox-active ligand. The ligand backbone of 2 can be readily hydrogenated with H2 to regenerate 1. Reduction of 1 and 2 with KC8 in the presence of 18-crown-6 results in cobalt-based reductions to afford [(PNCH2CH2NP)CoI][K(18-crown-6)] (3) and [(PNCHCHNP)CoI][K(18-crown-6)] (4), respectively. Cyclic voltammetry revealed two reversible oxidation processes for 2, presumed to be ligand-based. Following treatment of 2 with one equivalent of FcPF6, the one-electron oxidation product {[(PNCHCHNP)CoII(THF)][PF6]}·THF (5) was obtained. Treating 5 with an additional equivalent of FcPF6 affords the two-electron oxidation product [(PNCHCHNP)CoII][PF6]2 (6). Addition of PMe3 to 5 produced [(PNCHCHNP)CoII(PMe3)][PF6] (7). A host of characterization methods including nuclear magnetic resonance (NMR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, cyclic voltammetry, magnetic susceptibility measurements using SQUID magnetometry, single-crystal X-ray diffraction, and density functional theory calculations were used to assign 5 and 6 as ligand-based oxidation products of 2.

Hydrosilylation of Arynes with Silanes and Silicon-Based Polymer

Benzyne derived from hexadehydrogenated Diels Alder (HDDA) reactions was found to be an efficient hydrosilylation acceptors. Various silanes can react smoothly with HDDA-derived benzyne to give the arylation products. Lewis acid such as boron trifluoride etherate can accelerate these hydrosilylation reactions. Polyhydromethylsiloxane (PHMS), a widely used organosilicon polymer, was also successfully modified using our method. About 5 % of Si-H bonds in the polymer were inserted by benzynes, giving a functional PHMS with much more solubility in methanol and with a blue-emitting fluorescence behavior. Mechanism research shows that the insertion of benzyne into the Si-H bond probably undergoes a synergistic pathway, which is quite different from the traditional radical-initiated hydrosilylation or transition-metal-catalyzed hydrosilylation.

Nickel-catalyzed regiodivergent hydrosilylation of α-(fluoroalkyl)styrenes without defluorination

The fluoroalkyl-containing organic molecules are widely used in drug discovery and material science. Herein, we report ligand regulated nickel(0)-catalyzed regiodivergent hydrosilylation of α-(fluoroalkyl)styrenes without defluorination, providing an atom- and step-economical synthesis route of two types of fluoroalkyl substituted silanes with exclusive regioselectivity. The anti-Markovnikov addition products (β-fluoroalkyl substituted silanes) are formed with monodentate phosphine ligand. Noteworthy, the bidentate phosphine ligand promote the generation of the more challenging Markovnikov products (α-fluoroalkyl substituted silanes) with tetrasubstituted saturated carbon centers. This protocol features with easy available starting materials and commercially available nickel catalysis, a wide range of substrates and excellent regioselectivity. The structure divergent products undergo a variety of transformations. Comprehensive mechanistic studies including the inverse kinetic isotope effects demonstrate the regioselectivity controlled by ligand structure through α-CF3 nickel intermediate. DFT calculations reveal a distinctive mechanism involving an open-shell singlet state, which is crucial for generating intricate tetra-substituted Markovnikov products.

DFT Struggles to Predict the Energy Landscape for Iron Pyridine Diimine-Catalyzed [2 + 2] Cycloaddition of Alkenes: Insights into the Problem and Alternative Solutions

In recent years, noninnocent pyridine diimine (PDI) complexes featuring first-row transition metals have emerged as prominent catalysts, demonstrating efficacy in a diverse range of vital organometallic transformations. However, the inherent complexity of the fundamental reactivity paradigm in these systems arises from the presence of a noninnocent ligand and the multispin feasibility of 3d metals. While density functional theory (DFT) has been widely used to unravel mechanistic insights, its limitations as a single-reference method can potentially misrepresent spin-state energetics, compromising our understanding of these intricate systems. In this study, we employ extensive high-level ab initio state averaged-complete active space self-consistent field/N-electron valence state perturbation theory (SA-CASSCF/NEVPT2) calculations in combination with DFT to investigate an iron-PDI-catalyzed [2 + 2] cycloaddition reaction of alkenes. The transformation proceeds through two major steps: oxidative cyclization and reductive elimination. Contrary to the predictions of DFT calculations, which suggest two-state reactivity in the reaction and identify reductive elimination as the turnover-limiting step, SA-CASSCF/NEVPT2-corrected results unequivocally establish a single-state reactivity scenario with oxidative cyclization as the turnover-limiting step. SA-CASSCF/NEVPT2-based insights into electronic ground states and electron distribution elucidate the intriguing interactions between the PDI ligand and the iron center, revealing the highly multiconfigurational nature of these species and providing a precise depiction of metal-ligand cooperativity throughout the transformation. A comparative assessment of several widely recognized DFT functionals against SA-CASSCF/NEVPT2-corrected data indicates that single-point energy calculations using the modern density functional MN15 on TPSSh geometries offer the most reliable density functional methodology, in scenarios where SA-CASSCF/NEVPT2 computational cost is a consideration.

Catalytic Properties of [PSiP] Pincer Cobalt(II) Chlorides Supported by Trimethylphosphine for Alkene Hydrosilylation Reactions

In this paper, six silyl [PSiP] pincer cobalt(II) chlorides 1-6 [(2-Ph2PC6H4)2MeSiCo(Cl)(PMe3)] (1), [(2-Ph2PC6H4)2HSiCo(Cl)(PMe3)] (2), [(2-Ph2PC6H4)2PhSiCo(Cl)(PMe3)] (3), [(2-iPr2PC6H4)2HSiCo(Cl)(PMe3)] (4), [(2-iPr2PC6H4)2MeSiCo(Cl)(PMe3)] (5), and [(2-iPr2PC6H4)2PhSiCo(Cl)(PMe3)] (6)) were prepared from the corresponding [PSiP] pincer preligands (L1-L6), CoCl2 and PMe3 by Si-H bond activation. The catalytic activity of complexes 1-6 for alkene hyrdosilylation was studied. It was confirmed that complex 1 is the best catalyst with excellent regioselectivity among the six complexes. Using 1 as the catalyst, the catalytic reaction was completed within 1 h at 50 °C, predominantly affording Markovnikov products for aryl alkenes and anti-Markovnikov products for aliphatic alkene substrates. During the investigation of the catalytic mechanism, the Co(II) hydrides [(2-Ph2PC6H4)2MeSiCo(H)(PMe3)] (8) and [(2-iPr2PC6H4)2MeSiCo(H)(PMe3)] (9) were obtained from the stoichiometric reactions of complex 1 and 5 with NaBHEt3, respectively. Complexes 8 and 9 could also be obtained by the reactions of preligands L1 and L5 with Co(PMe3)4 via Si-H bond cleavage. More experiments corroborated that complex 8 is the real catalyst for this catalytic system. Under the same catalytic conditions as complex 1, using complex 8 as a catalyst, complete conversion of styrene was also achieved in 1 h, and the selectivity remained unchanged. Based on the experimental results, we propose a plausible mechanism for this catalytic reaction. The addition of B(C6F5)3 to catalyst 1 can reverse the selectivity of styrene hydrosilylation from the Markovnikov product as the main product (b/l = 99:1) to the anti-Markovnikov product as the main product (b/l = 40:60). Further study indicated that using the (CoCl2 + L1) system instead of complex 1, the selectivity was changed from Markovnikov to anti-Markovnikov product (b/l = 1:99.7). Therefore, the selectivity for the substrate styrene is influenced by the presence of a PMe3 ligand. The different selectivities may be caused by different active species. For the system of complex 1, a cobalt(II) hydride is the real catalyst, but for the (CoCl2 + L1) system, a cobalt(I) complex is proposed as active species. The molecular structures of Co(II) compounds 5 and 9 were resolved by single-crystal X-ray diffraction.

Preparation of silyl-terminated branched polyethylenes catalyzed by Brookhart's nickel diimine complex activated with hydrosilane/B(C6F5)3

Brookhart's nickel α-diimine complex [(κ2-N,N-BIAN)NiCl2] (1) (where BIAN = {Ar-NAceN-Ar}, Ace = acenaphthen-1,2-diyl, and Ar = 2,6-(iPr)2-C6H3) activated with a hydrosilane/B(C6F5)3 (SiHB) adduct forms a highly active catalytic system for ethylene polymerization. Under optimal conditions, the activity of the system depends on the nature of hydrosilane and decreases in the order R3SiH > Ph2SiH2 > PhSiH3. The decrease in system activity within the hydrosilane series is correlated with increasing formation of Ni(I) species. In addition to their activation effect, hydrosilanes act as efficient chain termination/chain transfer agents, with the Si/Ni ratio controlling the molecular weight of the resulting polyethylene (PE). The use of Et3SiH generated elastomeric, highly branched polymers with a saturated chain-end, while systems using Ph2SiH2 and PhSiH3 led to branched end-functionalized PEs terminated with the hydrosilyl functionality (i.e. br-PE-SiPh2H or br-PE-SiPhH2).

Simply accessible platinum(II) complexes enabling alkene hydrosilylation at ppm catalyst loadings

An efficient olefin hydrosilylation protocol utilising Pt(II)-thioether-based pre-catalysts is reported. These simple and readily available complexes exhibit excellent catalytic performance and offer significant advantages over existing alternatives, enabling rapid and high conversions at ppm-level catalyst loadings.

Multielectron Redox Afforded by a Pincer Ligand Promoting Kumada Cross-Coupling Reactions

The redox-active nature of a pincer has been exploited to conduct C-C cross-coupling reactions under mild conditions. A nickel complex with a NNN pincer was dimeric in the solid state, and the structure displayed a Ni2 N2 diamond core. In the dimeric structure, both ligand backbones house an electron, in the iminosemiquinonate form, to keep the metal's oxidation state at +2. In the presence of an aryl Grignard reagent, only 3 mol % loading the nickel complex generates a Kumada cross-coupled product in good yield from a wide variety of aryl-X (X= I, Br, Cl) substrates. That the ligand-based radical remains responsible for promoting such a coupling reaction following a radical pathway is suggested by TEMPO quenching. Furthermore, a radical-clock experiment along with tracing product distribution unambiguously supported the radical's involvement through the catalytic cycle. A series of thorough mechanistic probation, including computational DFT analysis, disclosed the cooperative action of both redox-active pincer ligand and the metal centre to drive the reaction.

Generation and Stabilization of a Dinickel Catalyst in a Metal-Organic Framework for Selective Hydrogenation Reactions

Although many monometallic active sites have been installed in metal-organic frameworks (MOFs) for catalytic reactions, there are no effective strategies to generate bimetallic catalysts in MOFs. Here we report the synthesis of a robust, efficient, and reusable MOF catalyst, MOF-NiH, by adaptively generating and stabilizing dinickel active sites using the bipyridine groups in MOF-253 with the formula of Al(OH)(2,2'-bipyridine-5,5'-dicarboxylate) for Z-selective semihydrogenation of alkynes and selective hydrogenation of C=C bonds in α,β-unsaturated aldehydes and ketones. Spectroscopic studies established the dinickel complex (bpy⋅- )NiII (μ2 -H)2 NiII (bpy⋅- ) as the active catalyst. MOF-NiH efficiently catalyzed selective hydrogenation reactions with turnover numbers of up to 192 and could be used in five cycles of hydrogenation reactions without catalyst leaching or significant decrease of catalytic activities. The present work uncovers a synthetic strategy toward solution-inaccessible Earth-abundant bimetallic MOF catalysts for sustainable catalysis.

New Ni(II)-Ni(II) Dinuclear Complex, a Resting State of the (α-diimine)NiBr2/AlMe3 Catalyst System for Ethylene Polymerization

A novel room-temperature stable diamagnetic nickel complex 2 was detected upon activation of Brookhart-type ethylene polymerization pre-catalyst LNiBr2 (1, L = 1,4-bis-2,4,6-trimethylphenyl-2,3-dimethyl-1,4-diazabuta-1,3-diene) with AlMe3. Using in situ 1H, 2H, and 13C NMR spectroscopy, as well as DFT calculations, this species has been identified as an antiferromagnetically coupled homodinuclear complex [LNiII(μ-Me)(μ-CH2)NiIIL]+Br−. Its behavior in the reaction solution is characteristic of the resting state of nickel catalyzed ethylene polymerization.

Sustainable Synthesis of Silicon Precursors Coupled with Hydrogen Delivery Based on Circular Economy via Molecular Cobalt-Based Catalysts

The development of a circular economy is a key target to reduce our dependence on fossil fuels and create more sustainable processes. Concerning hydrogen as an energy vector, the use of liquid organic hydrogen carriers is a promising strategy, but most of them present limitations for hydrogen release, such as harsh reaction conditions, poor recyclability, and low-value byproducts. Herein, we present a novel sustainable methodology to produce value-added silicon precursors and concomitant hydrogen via dehydrogenative coupling by using an air- and water-stable cobalt-based catalyst synthesized from cheap and commercially available starting materials. This methodology is applied to the one-pot synthesis of a wide range of alkoxy-substituted silanes using different hydrosilanes and terminal alkenes as reactants in alcohols as green solvents under mild reaction conditions (room temperature and 0.1 mol % cobalt loading). We also demonstrate that the selectivity toward hydrosilylation/hydroalkoxysilylation can be fully controlled by varying the alcohol/water ratio. This implies the development of a circular approach for hydrosilylation/hydroalkoxysilylation reactions, which is unprecedented in this research field up to date. Kinetic and in situ spectroscopic studies (electron paramagnetic resonance, nuclear magnetic resonance, and electrospray ionization mass spectrometry), together with density functional theory simulations, further provide a detailed mechanistic picture of the dehydrogenative coupling and subsequent hydrosilylation. Finally, we illustrate the application of our catalytic system in the synthesis of an industrially relevant polymer precursor coupled with the production of green hydrogen on demand.

Research on inorganic activators of dibromo Co-terpyridine complex precatalyst for hydrosilylation

The search for a stable, inexpensive, and easy-to-handle activator toward the catalyst precursor [Co(tpy)Br₂] in the hydrosilylation of olefins with hydrosilane revealed that K₂CO₃ is an effective activator. This inorganic salt is available on substrates with some functional groups and can be readily removed by simple filtration or centrifugation after the reaction. After examining and comparing the activator abilities of various salts, it was proposed that low MX lattice energy, high X-nucleophilicity, and a strong Si-X bond are necessary for an inorganic salt (MX) to be an excellent activator.

Control over Selectivity in Alkene Hydrosilylation Catalyzed by Cobalt(III) Hydride Complexes

Two new bisphosphine [PCP] pincer cobalt(III) hydrides, [(L¹)Co(PMe₃)(H)(Cl)] (^L11, L¹ = 2,6-((Ph₂P)(Et)N)₂C₆H₃) and [(L²)Co(PMe₃)(H)(Cl)] (^L21, L² = 2,6-((ⁱPr₂P)(Et)N)₂C₆H₃), as well as one new bissilylene [SiCSi] pincer cobalt(III) hydride, [(L³)Co(PMe₃)(H)(Cl)] (^L31, L³ = 1,3-((PhC(^tBuN)₂Si)(Et)N)₂C₆H₃), were synthesized by reaction of the corresponding protic [PCP] or [SiCSi] pincer ligands L¹H, L²H, and L³H with CoCl(PMe₃)₃. Despite the similarities in the ligand scaffolds, the three cobalt(III) hydrides show remarkably different performance as catalysts in alkene hydrosilylation. Among the PCP pincer complexes, ^L11 has higher catalytic activity than complex ^L21, and both catalysts afford anti-Markovnikov selectivity for both aliphatic and aromatic alkenes. In contrast, the catalytic activity for alkene hydrosilylation of silylene complex ^L31 is comparable to phosphine complex ^L11, but a dependence of regioselectivity on the substrates was observed: While aliphatic alkenes are converted in an anti-Markovnikov fashion, the hydrosilylation of aromatic alkenes affords Markovnikov products. The substrate scope was explored with 28 examples. Additional experiments were conducted to elucidate these mechanisms of hydrosilylation. The synthesis of cobalt(I) complex (L¹)Co(PMe₃)₂ (^L17) and its catalytic properties for alkene hydrosilylation allowed for the proposal of the mechanistic variations that occur in dependence of reaction conditions and substrates.

A General and Efficient Solution to Monofluoroalkylation: Divergent Synthesis of Aliphatic Monofluorides with Modular Synthetic Scaffolds

Monofluoroalkanes are important in many pharmaceuticals, agrochemicals and functional materials. However, the lack of easily available and transformable monofluoroalkylating reagents that facilitate a broad array of transformations has hampered the application of monofluoroalkylation. Herein, we report a general and efficient method of preparing diverse aliphatic monofluorides with monofluoroalkyl triflate as the synthetic scaffold. Using both nickel-catalyzed hydromonofluoroalkylation of unactivated alkenes and copper-catalyzed C-C bond formation, the general diversification of the monofluoroalkylating scaffold has been exhibited. The broad utility of this monofluoroalkylating reagent is shown by concise conversion into various conventional fluoroalkylating reagents and construction of monofluoro-alkoxy, -alkylamino motifs with commercially available heteroatom-based coupling partners.

Nickel-Catalyzed Regio- and Enantioselective Hydroamination of Unactivated Alkenes Using Carbonyl Directing Groups

The asymmetric addition of an N-H bond to various alkenes via a direct catalytic method is a powerful way of synthesizing value-added chiral amines. Therefore, the enantio- and regioselective hydroamination of unactivated alkenes remains an appealing goal. Here, we report the highly enantio- and regioselective Ni-catalyzed hydroamination of readily available unactivated alkenes bearing weakly coordinating native amides or esters. This method succeeds for both terminal and internal unactivated alkenes and has a broad amine coupling partner scope. The mild reaction process is well suited for the late-stage functionalization of complex molecules and has the potential to gain modular access to enantioenriched β- or γ-amino acid derivatives and 1,2- or 1,3-diamines. Mechanistic studies reveal that a chiral bisoxazoline-bound Ni specie effectively leverages carbonyl coordination to achieve enantio- and regioselective NiH insertion into alkenes.

Copper-Catalyzed Highly Selective Hydrosilylation of Silyl or Boryl Alkene: A Method for Preparing Chiral Geminated Disilyl and Borylsilyl Reagents

The copper-catalyzed highly selective hydrosilylation of silyl or boryl alkene has been developed. This chemistry could afford a practical method for preparing chiral geminated disilyl and borylsilyl reagents, which are useful organosilanes and versatile synthons for organic synthesis. The experimental data suggested that this reaction could be compatible with a variety of functional groups. Furthermore, the utility of the gem-dimetal compounds, which could be prepared by this chemistry, has been well illustrated by further transformations.

Mn2(CO)10 and UV light: a promising combination for regioselective alkene hydrosilylation at low temperature

The low temperature regioselective hydrosilylation of various alkenes with (1,1,1,3,5,5,5-heptamethyltrisiloxane) MD^HM is described using Mn₂(CO)₁₀ under UV irradiation with Mn loadings as low as 1 mol%, in the absence of additives and with excellent selectivity and yields. The generation of a manganese radical allowed the anti-Markovnikov hydrosilylation products to be selectively obtained in yields up to 99%.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)-carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)-metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM-E and TM-H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid-hydrogen and metalloid-metalloid bonds to unsaturated compounds; activation and functionalization of C-H bonds and C-X bonds with hydrometalloids and bismetalloids; activation and functionalization of C-H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

Regiodivergent hydrosilylation in the nickel(0)-catalyzed cyclization of 1,6-enynes

The divergent nickel(0)-catalyzed hydrosilylation/cyclization of 1,6-enynes has been developed, providing an efficient synthetic route for vinyl silanes or alkyl silanes from the same starting materials.

Oxime ester-enabled anti-Markovnikov hydrosilylation of alkenes

An oxime ester-enabled anti-Markovnikov hydrosilylation of alkenes is developed.

Synthesis of aryl cobalt and iron complexes and their catalytic activity on hydrosilylation of alkenes

Four aryl Co and Fe complexes, (F4C5N)CoCl(PMe3)3 (1), (F4C5N)Fe(PMe3)4 (2), (F5C6)CoCl(PMe3)3 (3) and (F4C5)FeCl(PMe3)3 (4), were synthesized from the reactions of 3-chloro-2,4,5,6-tetrafluoro-pyridine and chloropentafluorobenzene with Co(PMe3)4 and Fe(PMe3)4, respectively.

Highly Regio- and Enantioselective Hydrosilylation of gem-Difluoroalkenes via Nickel Catalysis

The synthesis of small organic molecules with a difluoromethylated stereocenter is particularly attractive in drug discovery. Herein, we developed an efficient method for the direct generation of difluoromethylated stereocenters through Ni(0)-catalyzed regio - and enantioselective hydrosilylation of gem -difluoroalkenes. The reaction also represents the enantioselective construction of carbon(sp 3 )-silicon bonds with nickel catalysis, which provides an atom- and step-economical synthesis route of high-value optically active α-difluoromethylsilanes. This protocol features with readily available starting materials and commercial chiral catalysis, broad substrates spanning a range of functional groups with high yield (up to 99% yield) and excellent enantioselectivity (up to 96% ee). The enantioenriched products undergo a variety of stereospecific transformations. Preliminary mechanistic studies were performed.

Extensive Redox Non-Innocence in Iron Bipyridine-Diimine Complexes: a Combined Spectroscopic and Computational Study

Metal-ligand cooperation is an important aspect in earth-abundant metal catalysis. Utilizing ligands as electron reservoirs to supplement the redox chemistry of the metal has resulted in many new exciting discoveries. Here, we demonstrate that iron bipyridine-diimine (BDI) complexes exhibit an extensive electron-transfer series that spans a total of five oxidation states, ranging from the trication [Fe(BDI)]3+ to the monoanion [Fe(BDI]-1. Structural characterization by X-ray crystallography revealed the multifaceted redox noninnocence of the BDI ligand, while spectroscopic (e.g., 57Fe Mössbauer and EPR spectroscopy) and computational studies were employed to elucidate the electronic structure of the isolated complexes, which are further discussed in this report.

Ni-Catalyzed Regioselective Hydroarylation of 1-Aryl-1,3-Butadienes with Aryl Halides

An efficient nickel-catalyzed regioselective hydroarylation of 1,3-dienes with aryl halides and a silane has been developed, affording a range of allylic arenes in good to excellent yields under mild conditions. This method exhibits broad substrate scope, and excellent functional group tolerance. Late-stage modification of complex architectures was demonstrated.

Phosphorous-substituted redox-active ligands in base metal hydrosilylation catalysis

This article highlights the utilization of phosphine-containing redox-active ligands for efficient hydrosilylation catalysis. Manganese, iron, cobalt, and nickel precatalysts featuring these chelates have been described and leading activities for carbonyl, carboxylate, and ester C-O bond hydrosilylation have been achieved. Mechanistic studies have provided insight into the importance of phosphine hemilability.

Facile Synthesis of Chiral Arylamines, Alkylamines and Amides by Enantioselective NiH-Catalyzed Hydroamination

Regio- and enantioselective hydroarylamination, hydroalkylamination and hydroamidation of styrenes have been developed by NiH catalysis with a simple bioxazoline ligand under mild conditions. A wide range of enantioenriched benzylic arylamines, alkylamines and amides can be easily accessed by nitroarenes, hydroxylamines and dioxazolones, respectively as amination reagents. The chiral induction in these reactions is proposed to proceed through an enantiodifferentiating syn-hydronickellation step.

Nickel-catalysed migratory hydroalkynylation and enantioselective hydroalkynylation of olefins with bromoalkynes

α-Chiral alkyne is a key structural element of many bioactive compounds, chemical probes, and functional materials, and is a valuable synthon in organic synthesis. Here we report a NiH-catalysed reductive migratory hydroalkynylation of olefins with bromoalkynes that delivers the corresponding benzylic alkynylation products in high yields with excellent regioselectivities. Catalytic enantioselective hydroalkynylation of styrenes has also been realized using a simple chiral PyrOx ligand. The obtained enantioenriched benzylic alkynes are versatile synthetic intermediates and can be readily transformed into synthetically useful chiral synthons.

Oxidation of Pd(II) with disilane in a palladium-catalyzed disilylation of aryl halides: a theoretical view

Density functional theory (DFT) calculation has been used to reveal the mechanism of the Pd-catalyzed disilylation reaction of aryl halides. The DFT calculations indicate that the reaction starts with the oxidative addition of the C-I bond to the Pd(0) catalyst. Concerted metalation-deprotonation (CMD) can then generate a five-membered palladacycle. Insertion of Pd(ii) into the Si-Si bond in disilane followed by two sequential steps of reductive eliminations yields the disilylation product and regenerates the Pd(0) catalyst. According to the NPA charge analysis along the reaction coordinates, the formal oxidative addition of the Si-Si bond to palladium could be considered as the insertion of palladium into the Si-Si bond. However, the conventional oxidative addition of the C-I bond to palladium is exactly an oxidation process with the electron transfer from the palladium atom to the C-I bond. Therefore, electron rich Pd(0) is beneficial for the oxidation process, and Pd(ii) prone to acquire electrons is beneficial for the insertion process.

Regio- and Stereoselective Functionalization Enabled by Bidentate Directing Groups

Chelation-assisted C-H bond and alkene functionalization using bidentate directing groups offers an elegant and versatile approach to overcome regiocontrol issues by allowing the catalyst to come into close proximity with the targeted sites. In this personal account, we highlight our recent works in developing regio- and stereocontrolled functionalizations through transition-metal catalysis enabled by bidentate directing groups. We classify our results into two categories: (1) regioselective alkene functionalization using bidentate directing groups, and (2) asymmetric C-H functionalization using chiral bidentate directing groups. Furthermore, density functional theory studies to elucidate the origin of the regio- and stereoselectivity exerted by bidentate directing groups are discussed.

Ruthenium-Catalyzed Dehydrogenation Through an Intermolecular Hydrogen Atom Transfer Mechanism

The direct dehydrogenation of alkanes is among the most efficient ways to access valuable alkene products. Although several catalysts have been designed to promote this transformation, they have unfortunately found limited applications in fine chemical synthesis. Here, we report a conceptually novel strategy for the catalytic, intermolecular dehydrogenation of alkanes using a ruthenium catalyst. The combination of a redox-active ligand and a sterically hindered aryl radical intermediate has unleashed this novel strategy. Importantly, mechanistic investigations have been performed to provide a conceptual framework for the further development of this new catalytic dehydrogenation system.