Synthesis−Structure–Function Relationships of Silica-Supported Niobium(V) Catalysts for Alkene Epoxidation with H2O2

Generation of Amorphous Silica Surfaces with Controlled Roughness

Amorphous silica (a-SiO2) surfaces, when grafted with select metals on the active sites of the functionalized surfaces, can act as useful heterogeneous catalysts. From a molecular modeling perspective, one challenge has been generating a-SiO2 slab models with controllable surface roughness to facilitate the study of the effect of surface morphology on the material properties. Previous computational methods either generate relatively flat surfaces or periodically corrugated surfaces that do not mimic the full range of potential surface roughness of the amorphous silica material. In this work, we present a new method, inspired by the capillary fluctuation theory of interfaces, in which rough silica slabs are generated by cleaving a bulk amorphous sample using a cleaving plane with Fourier components randomly generated from a Gaussian distribution. The width of this Gaussian distribution (and thus the degree of surface roughness) can be tuned by varying the surface roughness parameter α. Using the van Beest, Kramer, and van Santen (BKS) force field, we create a large number of silica slabs using cleaving surfaces of varying roughness (α) and using two different system sizes. These surfaces are then characterized to determine their roughness (mean-squared displacement), density profile, and ring size distribution. This analysis shows a higher concentration of surface defects (under-/overcoordinated atoms and strained rings) as the surface roughness increases. To examine the effect of the roughness on surface reactivity, we re-equilibriate a subset of these slabs using the reactive force field ReaxFF and then expose the slabs to water and observe the formation of surface silanols. We observe that the rougher surfaces exhibit higher silanol concentrations as well as bimodal acidity.

Site-Averaged Ab Initio Kinetics: Importance Learning for Multistep Reactions on Amorphous Supports

Single-atom centers on amorphous supports include catalysts for polymerization, partial oxidation, metathesis, hydrogenolysis, and more. The disordered environment makes each site different, and the kinetics exponentially magnifies these differences to make ab initio site-averaged kinetics calculations extremely difficult. This work extends the importance learning algorithm for efficient and precise site-averaged kinetics estimates to ab initio calculations and multistep reaction mechanisms. Specifically, we calculate site-averaged proton transfer relaxation rates on an ensemble of cluster models representing Brønsted acid sites on silica-alumina. We include direct and water-assisted proton transfer pathways and simultaneously estimate the water adsorption and activation enthalpies for forward and backward proton transfers. We use density functional theory (DFT) to obtain a site-averaged rate, somewhat like a turnover frequency, for the proton transfer relaxation rate. Finally, we show that importance learning can provide orders-of-magnitude acceleration over standard sampling methods for site-averaged rate calculations in cases where the rate is dominated by a few highly active sites.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Methyltrioxorhenium (MTO) catalysis in the epoxidation of alkenes: a synthetic overview

Epoxides are biologically important moiety that is also used as synthetic intermediates. This review aims to present the up-to-date advancements in methyltrioxorhenium (MTO)-catalyzed epoxidation of alkenes using diverse oxidizing agents.

Metal Organic Frameworks as Heterogeneous Catalysts in Olefin Epoxidation and Carbon Dioxide Cycloaddition

Metal–organic frameworks (MOFs) are a family of porous crystalline materials that serve in some cases as versatile platforms for catalysis. In this review, we overview the recent developments about the use of these species as heterogeneous catalysts in olefin epoxidation and carbon dioxide cycloaddition. We report the most important results obtained in this field relating them to the presence of specific organic linkers, metal nodes or clusters and mixed-metal species. Recent advances obtained with MOF nanocomposites were also described. Finally we compare the results and summarize the major insights in specific Tables, outlining the major challenges for this emerging field. This work could promote new research aimed at producing coordination polymers and MOFs able to catalyse a broader range of CO2 consuming reactions.

Role of Organic Fluoride Salts in Stabilizing Niobium Oxo-Clusters Catalyzing Epoxidation

We present here that easily available organic salts can stabilize/modify niobium (Nb) oxo-clusters. The as-synthesized Nb oxo-clusters have been characterized by various methods. These Nb oxo-clusters were catalytically active for the epoxidation of allylic alcohols and olefins with H₂O₂ as an oxidant. Notably, Nb-OC@TBAF-0.5 appeared as highly dispersed nanosized particles and showed the highest catalytic activity, which can be attributed to the following reasons on the basis of characterization. First, the strong coordination of fluorine ions with Nb sites and the steric protection with bulky organic cations led to high stabilization and dispersion of the oxo-clusters in the course of the reaction. Second, a hydrogen-bond interaction between the coordinated fluorine atom and the -OH group of allylic alcohol favored the epoxidation reaction. Third, the electron density of Nb sites decreased due to the strong electron-withdrawing ability of F^- adjacent to Nb sites, thus promoting the electrophilic oxygen transfer to the C═C bond.

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

A new heterogeneous catalytic system consisting of cobalt nanoparticles (CoNPs) supported on MgO and tert-butyl hydroperoxide (TBHP) as oxidant is presented. This CoNPs@MgO/t-BuOOH catalytic combination allowed the epoxidation of a variety of olefins with good to excellent yield and high selectivity. The catalyst preparation is simple and straightforward from commercially available starting materials and it could be recovered and reused maintaining its unaltered high activity.

Vapor-Phase Cyclohexene Epoxidation by Single-Ion Fe(III) Sites in Metal-Organic Frameworks

Heterogeneous catalysts supported on metal-organic frameworks (MOFs), which possess uniform porosity and crystallinity, have attracted significant interest for recent years due to the ease of active-site characterization via X-ray diffraction and the subsequent relation of the active site structure to the catalytic activity. We report the syntheses, structures, and oxidation catalytic activities of single-ion iron catalysts incorporated into the zirconium MOF NU-1000. Single-ion iron catalysts with different counteranions were anchored onto the Zr node through postsynthetic solvothermal deposition. Crystallographic characterization of the resulting MOFs (NU-1000-Fe-Cl and NU-1000-Fe-NO₃) revealed that, while both frameworks have similar Fe coordination, the distance between Fe and the Zr₆ node differs significantly between the two. The product rate profiles of the two catalysts for vapor-phase cyclohexene epoxidation demonstrate different initial rates and product formations, likely originating from the different Fe-O distances.

Towards Atomically Precise Supported Catalysts from Monolayer-Protected Clusters: The Critical Role of the Support

Controlling the size and uniformity of metal clusters with atomic precision is essential for fine-tuning their catalytic properties, however for clusters deposited on supports, such control is challenging. Here, by combining X-ray absorption spectroscopy and density functional theory calculations, it is shown that supports play a crucial role in the evolution of monolayer-protected clusters into catalysts. Based on the acidic nature of the support, cluster-support interactions lead either to fragmentation of the cluster into isolated Au-ligand species or ligand-free metallic Au⁰ clusters. On Lewis acidic supports that bind metals strongly, the latter transformation occurs while preserving the original size of the metal cluster, as demonstrated for various Au_n sizes. These findings underline the role of the support in the design of supported catalysts and represent an important step toward the synthesis of atomically precise supported nanomaterials with tailored physico-chemical properties.

Highly pure MgO2 nanoparticles as robust solid oxidant for enhanced Fenton-like degradation of organic contaminants

In typical Fenton/Fenton-like reactions, H₂O₂ was usually used as an oxidant to degrade organic contaminants. However, liquid H₂O₂ is unstable, easy to decompose and has high biological toxicity especially at high concentration. Herein, highly pure magnesium peroxide (MgO₂) nanoparticles were first synthesized and used instead of H₂O₂ to degrade organic dyes. The structure and morphology of as-prepared products were confirmed by XRD, SEM, TEM and FTIR techniques. The active oxygen content of MgO₂ nanoparticles reached up to 26.93 wt%, suggesting a high purity of the as-prepared sample. The degradation performance of MgO₂ nanoparticles towards organic contaminants was systematically investigated in the terms of the molar ratio of Fe³⁺ to MgO₂, the dosage of MgO₂, initial solution pH and different organic dyes. The results indicated the as-prepared MgO₂ exhibited excellent degradation ability to various types of organic dyes. 10 mg of MgO₂ nanoparticles could almost completely degrade 200 mL of 20 mg/L methylene blue (MB) in 30 min with a TOC removal rate of 70.2%. The efficient degradation performance was ascribed to the generation of hydroxyl radicals in the MgO₂/Fe³⁺ system. The pathways of MB degradation were also proposed based on the determination of the reaction intermediates.

Epoxidation of Karanja (Millettia pinnata) Oil Methyl Esters in the Presence of Hydrogen Peroxide over a Simple Niobium-Containing Catalyst

The synthesis, characterization and catalytic performance of a conceptually simple, novel NbOx-SiO2 catalyst are here described. The niobium(V)-silica catalyst was prepared starting from cheap and viable reactants, by alkaline deposition of NH4Nb(C2O4)2·H2O in the presence of fructose as a stabilizer and subsequent calcination. The NbOx-SiO2 solid (0.95 Nb wt.%) was tested in the liquid-phase epoxidation with aqueous hydrogen peroxide of methyl oleate, as a model substrate. It was then tested in the epoxidation of a mixture of methyl esters (FAMEs) obtained by transesterification with methanol and purification of karanja oil, extracted from the autochthonous Indian variety of Millettia pinnata tree. The catalyst showed a promising performance in terms of methyl oleate conversion (up to 75%) and selectivity to epoxide (up to 82%). It was then tested on the FAME mixture from karanja oil, where interesting conversion values were attained (up to 70%), although with lower selectivities and yields to the mixture of desired epoxidized FAMEs. The solid withstood four catalytic cycles overall, during which a non-negligible surface reorganization of the Nb(V) sites was observed. However, this restructuring did not negatively affect the performance of the catalysts in terms of conversion or selectivity.

Selective Hydrogenation of CO2 to CH3 OH on Supported Cu Nanoparticles Promoted by Isolated TiIV Surface Sites on SiO2

Small and narrowly distributed Cu nanoparticles, supported on SiO₂ decorated with isolated Ti^IV sites, prepared through surface organometallic chemistry, showed significantly improved CO₂ hydrogenation activity and CH₃ OH selectivity compared to the corresponding Cu nanoparticles supported on SiO₂ . These isolated Lewis acid Ti^IV sites, evidenced by UV/Vis spectroscopy, are proposed to stabilize surface intermediates at the interface between Cu nanoparticles and the support.

Morphology-maintaining synthesis of NbN and its catalytic performance in epoxidation

A strategy for the synthesis of NbN with different morphologies was provided and the reactivity for epoxidation was investigated.

Toward Exploiting the Behavior of Niobium-Containing Mesoporous Silicates vs. Polyoxometalates in Catalysis

Classification of polyoxometalates (POMs) is based on their chemical composition, basically represented by two general formulae: a) [MmOy]p- b) [XxMmOy]q-, where M is the main transition metal, O is the oxygen atom and X can be a non-metal atom such as Si. Additionally, in the most cases, the structure of the polyoxometalates is derived from a combination of octahedral units MO6 with a central metal atom M and the oxygen atoms placed at their corners. In such octahedra, oxygen atoms allow the condensation between two octahedral units, while one oxygen atom (or max. two atoms) makes double bond with the central metal atom and is not shared with other metal atoms within the complex (terminal oxygens). On the other hand, niobium-containing mesoporous silicates contain mainly MO4 tetrahedra and reveal superior activity in heterogeneous catalysis. Thus, the proper coordination of niobium is crucial for the catalytic activity and will be deeply discussed. The similarity in the catalytic behavior of niobium-polyoxometalates and heterogeneous niobium single-site catalysts in selective oxidations will be demonstrated.

Surface organometallic chemistry in heterogeneous catalysis

Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO₂conversion, oxidation).

Periodic Trends in Olefin Epoxidation over Group IV and V Framework-Substituted Zeolite Catalysts: A Kinetic and Spectroscopic Study

Group IV and V framework-substituted zeolites have been used for olefin epoxidation reactions for decades, yet the underlying properties that determine the selectivities and turnover rates of these catalysts have not yet been elucidated. Here, a combination of kinetic, thermodynamic, and in situ spectroscopic measurements show that when group IV (i.e., Ti, Zr, and Hf) or V (i.e., Nb and Ta) transition metals are substituted into zeolite *BEA, the metals that form stronger Lewis acids give greater selectivities and rates for the desired epoxidation pathway and present smaller enthalpic barriers for both epoxidation and H₂O₂ decomposition reactions. In situ UV-vis spectroscopy shows that these group IV and V materials activate H₂O₂ to form pools of hydroperoxide, peroxide, and superoxide intermediates. Time-resolved UV-vis measurements and the isomeric distributions of Z-stilbene epoxidation products demonstrate that the active species for epoxidations on group IV and V transition metals are only M-OOH/-(O₂)^2- and M-(O₂)^- species, respectively. Mechanistic interpretations of kinetic data suggest that these group IV and V materials catalyze cyclohexene epoxidation and H₂O₂ decomposition through largely identical Eley-Rideal mechanisms that involve the irreversible activation of coordinated H₂O₂ followed by reaction with an olefin or H₂O₂. Epoxidation rates and selectivities vary over five- and two-orders of magnitude, respectively, among these catalysts and depend exponentially on the energy for ligand-to-metal charge transfer (LMCT) and the functional Lewis acid strength of the metal centers. Together, these observations show that more electrophilic active-oxygen species (i.e., lower-energy LMCT) are more reactive and selective for epoxidations of electron-rich olefins and explain why Ti-based catalysts have been identified as the most active among early transition metals for these reactions. Further, H₂O₂ decomposition (the undesirable reaction pathway) possesses a weaker dependence on Lewis acidity than epoxidation, which suggests that the design of catalysts with increased Lewis acid strength will simultaneously increase the reactivity and selectivity of olefin epoxidation.