Bifunctional N-Doped Co@C Catalysts for Base-Free Transfer Hydrogenations of Nitriles: Controllable Selectivity to Primary Amines vs Imines

Highly efficient selective hydrogenation of adiponitrile to hexamethylene diamine over barium and melamine formaldehyde resin-modified nickel-cobalt-based zeolitic imidazolate framework-derived catalyst

In the present study, the catalyst modified with alkaline oxide can enhance the selectivity to primary amines. However, the addition of alkaline oxide inevitably reduces catalytic activity. In this study, NiCo-NC@BaO-MFC catalyst derived from zeolitic imidazolate framework-67, Ba(CH3COO)2, and melamine formaldehyde (MF) resin was prepared and used for the hydrogenation of adiponitrile (ADN) to hexamethylene diamine (HDMA). The carbon layer obtained from the MF resin effectively prevents the interaction between barium (Ba) and the active center, thus improving target product selectivity without decreasing catalytic activity. The results of the density functional theory (DFT) calculation and characterization indicated that the effect of synergy between nickel (Ni) and cobalt (Co) bimetals induces an electron density growth on the Ni surface, bringing the d-band center toward the Fermi surface. Meanwhile, the high electron density of the active center compensates for the electron-deficient state of the carbon atom in -CN, thus improving the catalytic activity. Furthermore, it was found that the introduction of Ba promotes the formation of nucleophilic hydrogen anions, which facilitates the hydrogenation of 6-aminohexylimine (AHIM) to HDMA and inhibits the intramolecular condensation of AHIM, hence improving the selectivity to HDMA. The NiCo-NC@BaO-MFC catalyst gives 98.6 % ADN conversion and 97.2 % selectivity to HDMA in an alkali-free system.

Synthesis and Characterization of MOF-Derived Structures: Recent Advances and Future Perspectives

Due to their facile tunability, metal-organic frameworks (MOFs) are employed as precursors and templates to construct advanced functional materials with unique and desired chemical, physical, mechanical, and morphological properties. By tuning MOF precursor composition and manipulating conversion processes, various MOF-derived materials commonly known as MOF derivatives can be constructed. The possibility of controlled and predictable properties makes MOF derivatives a preferred choice for numerous advanced technological applications. The innovative synthetic designs besides the plethora of interdisciplinary characterization approaches applicable to MOF derivatives provide the opportunity to perform a myriad of experiments to explore the performance and offer key insight to develop the next generation of advanced materials. Though there are many published works of literature describing various synthesis and characterization techniques of MOF derivatives, it is still not clear how the synthesis mechanism works and what are the best techniques to characterize these materials to probe their properties accurately. In this review, the recent development in synthesis techniques and mechanisms for a variety of MOF derivates such as MOF-derived metal oxides, porous carbon, composites/hybrids, and sulfides is summarized. Furthermore, the details of characterization techniques and fundamental working principles are summarized to probe the structural, mechanical, physiochemical, electrochemical, and electronic properties of MOF and MOF derivatives. The future trends and some remaining challenges in the synthesis and characterization of MOF derivatives are also discussed.

Photo-thermal Catalytic Hydrogenation of Halogenated Nitrobenzenes over Ni/P25 Catalyst

As haloanilines (HANs) are important organic intermediates and fine chemicals, their preparation over non-noble-metal-based catalysts by catalytic hydrogenation has attracted wide attention. However, the reaction suffers from relatively harsh conditions. Herein, we found that a 3.5%Ni/P25 catalyst exhibited superior photo-thermal catalytic activity with a TOFs of 5207 h-1 for hydrogenation of p-chloronitrobenzene (p-CNB) to p-chloroaniline under a 300 W full spectrum, which was much higher than that of photo- and thermal catalysis alone. Moreover, the 3.5%Ni/P25 catalyst could be recycled 4 times and was effective for the hydrogenation of various halonitrobenzenes (HNBs) with superior selectivity. Furthermore, the kinetic research showed that the excellent catalytic performance could be attributed to the better activation and dissociation of H2 by photo-thermal catalysis and the hydrogenation of p-CNB obeyed the condensation routine by ionic hydrogenation over 3.5%Ni/P25.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

Nitrogen-doped ordered mesoporous carbon supported ruthenium metallic nanoparticles: Opportunity for efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran by catalytic transfer hydrogenation

One of the most promising solutions to the current energy crisis is an efficient catalytic transformation of abundant low-cost renewable raw biomass into high-quality biofuel. Herein, a highly effective catalyst was constructed systematically for the selective synthesis of 2,5-dimethylfuran (DMF) biofuel from biomass-derived 5-hydroxymethylfurfural (HMF) via green catalytic transfer hydrogenolysis (CTH) using a nitrogen-doped ordered mesoporous carbon (N-CMK-1) decorated ruthenium (Ru)-based catalyst in i-propanol as hydrogen source. The structures and properties of different catalysts were characterized by different characterization techniques such as FTIR, XRD, N2-sorption, CO2-sorption, TGA, TEM, ICP-AES, CHNO analysis, and acid-base back titration. A complete HMF conversion with a high DMF yield of 88% was achieved under optimized reaction conditions. Regarding substrate conversion and product yield, the influence of reaction temperature, time, and hydrogen donors was thoroughly investigated. The nitrogen-promoted carbon support enhanced the dispersion of Ru due to the formation of appropriate basic site density which could efficiently promote the activation of alcohol hydroxyl in i-propanol and subsequent release of active hydrogen species. In the meantime, highly dispersed surface Ru nanoparticles (NPs) were beneficial for hydrogen transfer and activation of both carbonyl and hydroxyl groups in HMF. Moreover, Arrhenius kinetic analysis was studied by identifying 5-methyl furfural (5-MF) and 2,5-bishydroxymethylfuran (BHMF) as two key intermediates that dominate a distinct reaction pathway during hydrogenolysis of HMF to DMF via CTH. Furthermore, high stability without obvious loss of activity after three consecutive cycles was observed in a fabricated N-CMK-1 decorated Ru-based catalyst as a result of superior metal-support interaction and the mesoporous framework nature of the catalyst. These findings would not only offer a robust catalyst synthetic approach but also open a new avenue for the exploitation of biomass to specialty chemicals and advanced biofuels.

Cobalt Encapsulated in Nitrogen-Doped Graphite-like Shells as Efficient Catalyst for Selective Oxidation of Arylalkanes

Selective oxidation of ethylbenzene to acetophenne is an important process in both organic synthesis and fine chemicals diligence. The cobalt-based catalysts combined with nitrogen-doped carbon have received great attention in ethylbenzene (EB) oxidation. Here, a series of cobalt catalysts with metallic cobalt nanoparticles (NPs) encapsulated in nitrogen-doped graphite-like carbon shells (Co@NC) have been constructed through the one-pot pyrolysis method in the presence of different nitrogen-containing compounds (urea, dicyandiamide and melamine), and their catalytic performance in solvent-free oxidation of EB with tert-butyl hydrogen peroxide (TBHP) as an oxidant was investigated. Under optimized conditions, the UCo@NC (urea as nitrogen source) could afford 95.2% conversion of EB and 96.0% selectivity to acetophenone, and the substrate scalability was remarkable. Kinetics show that UCo@NC contributes to EB oxidation with an apparent activation energy of 32.3 kJ/mol. The synergistic effect between metallic cobalt NPs and nitrogen-doped graphite-like carbon layers was obviously observed and, especially, the graphitic N species plays a key role during the oxidation reaction. The structure-performance relationship illustrated that EB oxidation was a free radical reaction through 1-phenylethanol as an intermediate, and the possible reaction mechanistic has been proposed.

Preparation of mesoporous chitosan iron supported nano-catalyst for the catalyzed oxidation of primary amine to imine

Supported nano-catalysts with environmental sustainability and high catalytic performance are of great research interest for sustainable catalysis. In this article, a supported nano-catalyst, FeA-NC, with high catalytic performance was prepared by anchoring the transition metal iron onto nitrogen-doped porous carbon materials using chitosan as a raw material. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) measurement results demonstrated that the obtained catalyst has an excellent mesoporous structure, and that the element Fe is evenly distributed. The support contains abundant N atoms, which can provide sufficient anchoring points for Fe and form Fe-Nx groups with Fe, improving the catalytic activity of the catalyst. Additionally, the FeA-NC with a porous structure can also enhance the mass transfer of reactants to improve the reaction efficiency. In addition, the prepared catalyst was used to catalyze the conversion of primary amines to the corresponding imines. The results showed that the direct oxidation of primary amines to the corresponding imines can be catalyzed by using air as an oxygen source and distilled H2O as a solvent under atmospheric pressure at 90 °C. Finally, the selectivity and stability of the as-prepared catalyst were also verified.

New Insights into N-Doped Porous Carbons as Both Heterogeneous Catalysts and Catalyst Supports: Opportunities for the Catalytic Synthesis of Valuable Compounds

Among the vast class of porous carbon materials, N-doped porous carbons have emerged as promising materials in catalysis due to their unique properties. The introduction of nitrogen into the carbonaceous matrix can lead to the creation of new sites on the carbon surface, often associated with pyridinic or pyrrolic nitrogen functionalities, which can facilitate various catalytic reactions with increased selectivity. Furthermore, the presence of N dopants exerts a significant influence on the properties of the supported metal or metal oxide nanoparticles, including the metal dispersion, interactions between the metal and support, and stability of the metal nanoparticles. These effects play a crucial role in enhancing the catalytic performance of the N-doped carbon-supported catalysts. Thus, N-doped carbons and metals supported on N-doped carbons have been revealed to be interesting heterogeneous catalysts for relevant synthesis processes of valuable compounds. This review presents a concise overview of various methods employed to produce N-doped porous carbons with distinct structures, starting from diverse precursors, and showcases their potential in various catalytic processes, particularly in fine chemical synthesis.

Opportunities from Metal Organic Frameworks to Develop Porous Carbons Catalysts Involved in Fine Chemical Synthesis

In the last decade, MOFs have been proposed as precursors of functional porous carbons with enhanced catalytic performances by comparison with other traditional carbonaceous catalysts. This area is rapidly growing mainly because of the great structural diversity of MOFs offering almost infinite possibilities. MOFs can be considered as ideal platforms to prepare porous carbons with highly dispersed metallic species or even single-metal atoms under strictly controlled thermal conditions. This review briefly summarizes synthetic strategies to prepare MOFs and MOF-derived porous carbons. The main focus relies on the application of the MOF-derived porous carbons to fine chemical synthesis. Among the most explored reactions, the oxidation and reduction reactions are highlighted, although some examples of coupling and multicomponent reactions are also presented. However, the application of this type of catalyst in the green synthesis of biologically active heterocyclic compounds through cascade reactions is still a challenge.

Activation of sulfite by metal-organic framework-derived cobalt nanoparticles for organic pollutants removal

Sulfite (SO₃^2-) activation is one of the most potential sulfate-radical-based advanced oxidation processes, and the catalysts with high efficiency and low-cost are greatly desired. In this study, the cobalt nanoparticles embedded in nitrogen-doped graphite layers (Co@NC), were used to activate SO₃^2- for removal of Methyl Orange in aqueous solution. The Co@NC catalysts were synthesized via pyrolysis of Co²⁺-based metal-organic framework (Co-MOF), where CoO was firstly formed at 400℃ and then partially reduced to Co nanoparticles embedded in carbon layers at 800℃. The Co@NC catalysts were more active than other cobalt-based catalysts such as Co²⁺, Co₃O₄ and CoFe₂O₄, due to the synergistic effect of metallic Co and Co_xO_y. A series of chain reaction between Co species and dissolved oxygen was established, with the production and transformation of SO₃^•-, SO₅^2-, and subsequent active radicals SO₄^•- and HO•. In addition, HCO₃^- was found to play a key role in the reaction by complexing with Co species on the surface of the catalysts. The results provide a new promising strategy by using the Co@NC catalyst for SO₃^2- oxidation to promote organic pollutants degradation.

Hydrogen spillover effects in the Fischer–Tropsch reaction over carbon nanotube supported cobalt catalysts

Support (CNTs) surface defect-induced hydrogen spillover significantly impacted the catalytic activity (turnover frequency, TOF) and methane selectivity evolution in cobalt-based Fischer–Tropsch synthesis.

Metal-organic frameworks as a good platform for the fabrication of multi-metal nanomaterials: design strategies, electrocatalytic applications and prospective

MOF-derived multi-metal nanomaterials are attracting numerous attentions in widespread applications such as catalysis, sensors, energy storage and conversion, and environmental remediation. Compared to the monometallic counterparts, the presence of foreign metal is expected to bring new physicochemical properties, thus exhibiting synergistic effect for enhanced performance. MOFs have been proved as a good platform for the fabrication of polymetallic nanomaterials with requisite features. Herein, various design strategies related to constructing multi-metallic nanomaterials from MOFs are summarized for the first time, involving metal nodal substitution, seed epitaxial growth, ion-exchange strategy, guest species encapsulation, solution impregnation and combination with extraneous substrate. Afterwards, the recent advances of multi-metallic nanomaterials for electrocatalytic applications, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), are systematically discussed. Finally, a personal outlook on the future trends and challenges are also presented with hope to enlighten deeper understanding and new thoughts for the development of multi-metal nanomaterials from MOFs.

Formation of Interfacial Cu-[OX ]-Ce Structures with Oxygen Vacancies for Enhanced Electrocatalytic Nitrogen Reduction

Electrochemical nitrogen reduction powered by renewable electricity is a promising strategy to produce ammonia. However, the lack of efficient yet cheap electrocatalysts remains the biggest challenge. Herein, hybrid Cu₂ O-CeO₂ -C nanorods are prepared on copper mesh through a metal-organic framework template route. The Cu-loaded Ce-MOF is thermally converted to Cu₂ O-CeO₂ heterojunctions with interfacial Cu-[O_X ]-Ce structures embedded in carbon. Theoretical calculations reveal the lower formation energy of oxygen vacancies in Cu-[O_X ]-Ce structures than in the Cu₂ O or CeO₂ phase. The Cu-[O_X ]-Ce structures with oxygen vacancies enable the formation of interfacial electron-rich Cu(I) species which show significantly enhanced performance toward electrocatalytic nitrogen reduction with an NH₃ yield of 6.37 × 10^-3  µg s^-1 cm^-2 and a Faradaic efficiency of 18.21% in 0.10 m KOH at -0.3 V versus reversible hydrogen electrode. This work highlights the importance of modulation of charge distribution of Cu-based electrocatalysts to boost the activity toward nitrogen reduction.

Applications of catalysis in hydroboration of imines, nitriles, and carbodiimides

The catalytic hydroboration of imines, nitriles, and carbodiimides is a powerful method of preparing amines which are key synthetic intermediates in the synthesis of many value-added products. Imine hydroboration has perennially featured in notable reports while nitrile and carbodiimide hydroboration have gained attention recently. Initial developments in catalytic hydroboration of imines and nitriles employed precious metals and typically required harsh reaction conditions. More recent advances have shifted toward the use of base metal and main group element catalysis and milder reaction conditions. In this survey, we review metal and nonmetal catalyzed hydroboration of these unsaturated organic molecules and group them into three distinct categories: precious metals, base metals, and main group catalysts. The TON and TOF of imine hydroboration catalysts are reported and summarized with a brief overview of recent advances in the field. Mechanistic and kinetic studies of some of these protocols are also presented.

Advances in the Catalytic Reductive Amination of Furfural to Furfural Amine: The Momentous Role of Active Metal Sites

One-pot synthesis of sustainable primary amines by catalytic reductive amination of bio-based carbonyl compounds with NH₃ and H₂ is emerging as a promising and robust approach. The primary amines, especially furfuryl amine (FUA) derived from furfural (FUR), with a wide range of applications from pharmaceuticals to agrochemicals, have attracted much attention due to their versatility. This Review is majorly comprised of two segments on the reductive amination of FUR to FUA, one with precious (Ru, Pd, Rh) and the other with non-precious (Co, Ni) metals on different supports and in various solvent systems in the presence of NH₃ and H₂ . The active metal sites generated on multiple supports are accentuated with experimental evidence based on CO-diffuse reflectance infrared Fourier-transform spectroscopy, H₂ temperature-programmed reduction, X-ray photoelectron spectroscopy, and calorimetry. Moreover, this Review comprehensively describes the role of acidic and basic support for the metal on the yield of FUA. Overall, this Review provides an insight into how to design and develop an efficiently robust catalyst for the selective reductive amination of a broad spectrum of carbonyl compounds to corresponding amines.

ZIF-Derived Metal/N-Doped Porous Carbon Nanocomposites: Efficient Catalysts for Organic Transformations

Recently, zeolitic imidazolate framework (ZIF)-derived metal/N-doped porous carbon nanocomposites (M@NCs) have emerged as a class of appealing heterogeneous catalysts applied in organic synthesis, and the striking features mainly involve low-cost...

Modulated electronic structure of Pd nanoparticles on Mg(OH)2 for selective benzonitrile hydrogenation into benzylamine at a low temperature

Pd nanoparticles with enriched electronic density anchored on Mg(OH)2 realize selective benzonitrile hydrogenation to benzylamine at low temperature in the absence of additives, in an atom-economical and green approach for synthesis of highly value-added primary amines.

CoCe/N–C hybrids constructed via Ce–O–Co solid solution for the deoxygenation of sulfoxide

CeO2-promoted Co–N–C hybrids were prepared by the strategy of solid solution construction for the deoxygenation of sulfoxide.

Novel bimetallic MOF derived N-doped carbon supported Ru nanoparticles for efficient reduction of nitro aromatic compounds and rhodamine B

N-doped carbon enables Ru-NC-15 to exhibit extremely high catalytic activity towards 4-nitrophenol and rhodamine B reduction.

MOF-Directed Construction of Cu-Carbon and Cu@N-Doped Carbon as Superior Supports of Metal Nanoparticles toward Efficient Hydrogen Generation

The modulation of electronic behavior of metal-based catalysts is vital to optimize their catalytic performance. Herein, metal-organic frameworks (MOFs) are pyrolyzed to afford a series of different-structured Cu-carbon composites and Cu@N-doped carbon composites. Then a series of CO-resistant catalysts, namely, Co or Ni nanoparticles supported by the Cu-based composites, are synthesized for the hydrogen generation from aqueous NH3BH3. Their catalytic activities are boosted under light irradiation and regulated by the compositions and the fine structures of doped N species with pyridine, pyrrole, and graphitic configurations in the composite supports. Particularly, the optimized Co-based catalyst with the highest graphitic N content exhibits a high activity, achieving a total turnover frequency (TOF) value of 210 min-1, which is higher than all the reported unprecious catalysts. Further investigations verify that the light-driven synergistic electron effect of plasmonic Cu-based composites and Co nanoparticles accounts for the high-performance hydrogen generation.

Tuning the selectivity of catalytic nitriles hydrogenation by structure regulation in atomically dispersed Pd catalysts

The product selectivity in catalytic hydrogenation of nitriles is strongly correlated with the structure of the catalyst. In this work, two types of atomically dispersed Pd species stabilized on the defect-rich nanodiamond-graphene (ND@G) hybrid support: single Pd atoms (Pd₁/ND@G) and fully exposed Pd clusters with average three Pd atoms (Pd_n/ND@G), were fabricated. The two catalysts show distinct difference in the catalytic transfer hydrogenation of nitriles. The Pd₁/ND@G catalyst preferentially generates secondary amines (Turnover frequency (TOF@333 K 709 h⁻¹, selectivity >98%), while the Pd_n/ND@G catalyst exhibits high selectivity towards primary amines (TOF@313 K 543 h⁻¹, selectivity >98%) under mild reaction conditions. Detailed characterizations and density functional theory (DFT) calculations show that the structure of atomically dispersed Pd catalysts governs the dissociative adsorption pattern of H₂ and also the hydrogenation pathway of the benzylideneimine (BI) intermediate, resulting in different product selectivity over Pd₁/ND@G and Pd_n/ND@G, respectively. The structure-performance relationship established over atomically dispersed Pd catalysts provides valuable insights for designing catalysts with tunable selectivity.

The selective hydrogenation of nitriles to prepare corresponding amines is highly desired in chemistry industry. Here, the authors selectively obtained secondary amines and primary amines over two types of atomically dispersed Pd catalysts supported on the nanodiamond-graphene hybrid support.

Step by Step Construction of Multifunctional Hollow Double Shell MNPs@MOF as a Powerful Tandem/Cascade Catalyst

The development of efficient heterogeneous catalysts for one-pot tandem/cascade synthesis of imines remains meaningful and challenging. Herein, we constructed an Au/MOF catalyst featured hollow and double MOF shell nanostructure. Owing to its structural merits and acid-basic nature, the as-synthesized Void|(Au)ZIF-8|ZIF-8 catalyst exhibited an enhanced synergistically catalytic performance for tandem catalytic synthesis of imines from benzyl alcohol and aniline under air atmosphere and solvent-free condition. Its 170.16 h⁻¹ of turnover frequency (TOF) was 2.5 times higher than that of the reported catalyst with the highest TOF value.

Construction of a PCN/Fe2O3/CdS double Z-type heterojunction photocatalyst and its application in the oxidative coupling reaction of benzylamine

In this work, a PCN/Fe2O3/CdS ternary heterojuction photocatalyst was constructed by introducing an appropriate amount of ferric oxide (Fe2O3) and cadmium sulfide (CdS) onto porous carbon nitride (PCN), denoted as PCN/Fe2O3/CdS. In the presence of PCN/Fe2O3/CdS, the turnover frequency value and selectivity of the oxidative coupling reaction of benzylamine were 6740 μmol g-1 h-1 and 99.4%, respectively. The excellent catalytic performance of the PCN/Fe2O3/CdS photocatalyst is attributed to fully exposed active sites due to the porous structure of PCN, improved light utilization efficiency by introduction of Fe2O3 and CdS, and increased mobility of e--h+ pairs by construction of a ternary heterostructure, and was proved by the analysis of its structural and optical properties. According to the substrate scope study and Hammett diagram analysis, the rate determining step of the benzylamine self-coupling reaction photocatalyzed by PCN/Fe2O3/CdS was the condensation of imine and benzylamine into N-benzylidenebenzylamine. The results of the free radical quenching experiment and electron spin resonance tests showed that h+ played a major role in the photoreaction process, followed by ˙O2- and ˙OH. After four photocatalytic reaction cycles, the catalytic performance of the PCN/Fe2O3/CdS heterojunction composite material remained good. Finally, combined with the free radical trapping experiment and energy band structure analysis, a possible double Z-type reaction mechanism was proposed.

An Efficient Catalyst Derived from Carboxylated Lignin-Anchored Iron Nanoparticle Compounds for Carbon Monoxide Hydrogenation Application

Catalytic activity and target product selectivity are strongly correlated to the size, crystallographic phase, and morphology of nanoparticles. In this study, waste lignin from paper pulp industry is employed as the carbon source, which is modified with carboxyl groups at the molecular level to facilitate anchoring of metals, and a new type of carbon-based catalyst was obtained after carbonization. As a result, the size of the metal particles is effectively controlled by the chelation between -COO- and Fe3+. Furthermore, Fe/CM-CL with a particle size of 1.5-2.5 nm shows excellent catalytic performance, the conversion of carbon monoxide reaches 82.3%, and the selectivity of methane reaches 73.2%.

Selective Hydrogenation of Furfural over the Co-Based Catalyst: A Subtle Synergy with Ni and Zn Dopants

A multimetal doping strategy has aroused extensive attention in promoting a non-noble catalyst for selective hydrogenation reaction. Herein, a multimetallic catalyst (NiCoZn@CN) with excellent catalytic performance for hydrogenation of furfural (FAL) to furfuryl alcohol (FOL) is prepared through a facile, inexpensive, and efficient pyrolysis method. Using H₂ as a H donor, extremely high selectivity (>99%) with 100% conversion is attained over the optimal NiCoZn@CN-600 catalyst. The subtle synergy between Co and Ni, Zn dopants, which remarkably promotes the performance of the Co-based catalyst, is revealed. In the NiCoZn@CN system, Co⁰ is proven to be the main active site, whose content is greatly improved by Ni and Co dopants. Additionally, the Ni dopant could also benefit activation of H₂ and the Zn dopant could enhance metal nanoparticle dispersion and the porous structure of the catalyst. In situ FTIR indicates that the vertical adsorption mode of FAL with the O_aldehyde terminal on NiCoZn@CN-600 ensures a selective hydrogenation process. With a N-doped carbon matrix, NiCoZn@CN-600 shows good cycling stability in five times run. NiCoZn@CN-600 is also competent in the catalytic transfer hydrogenation (CTH) of FOL, affording >99% yield with 2-propanol as a H donor. This study opens an avenue toward rational design of multimetallic doping catalysts with high selectivity for challenging reactions in the conversion of biomass-derived compounds.

CoPd Nanoalloys with Metal-Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal-organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.

Two Isostructural URJC-4 Materials: From Hydrogen Physisorption to Heterogeneous Reductive Amination through Hydrogen Molecule Activation at Low Pressure

Herein, two novel isostructural metal-organic frameworks (MOFs) M-URJC-4 (M = Co, Ni; URJC = "Universidad Rey Juan Carlos") with open metal sites, permanent microposity, and large surface areas and pore volumes have been developed. These novel MOFs, with polyhedral morphology, crystallize in the monoclinic P2₁/c space group, exhibiting a three-dimensional structure with microporous channels along the c axis. Initially, they were fully characterized and tested in hydrogen (H₂) adsorption at different conditions of temperature and pressure. The physisorption capacities of both materials surpassed the gravimetric H₂ uptake shown by most MOF materials under the same conditions. On the basis of the outstanding adsorption properties, the Ni-URJC-4 material was used as a catalyst in a one-pot reductive amination reaction using various carbonyl compounds and primary amines. A possible chemical pathway to obtain secondary amines was proposed via imine formation, and remarkable performances were accomplished. This work evidences the dual ability of M-URJC-4 materials to be used as a H₂ adsorbent and a catalyst in reductive amination reactions, activating molecular H₂ at low pressures for the reduction of C═N double bonds and providing reference structural features for the design of new versatile heterogeneous materials for industrial application.

Selective Acceptorless Dehydrogenation of Primary Amines to Imines by Core-Shell Cobalt Nanoparticles

Core-shell nanocatalysts are attractive due to their versatility and stability. Here, we describe cobalt nanoparticles encapsulated within graphitic shells prepared via the pyrolysis of a cationic poly-ionic liquid (PIL) with a cobalt(II) chloride anion. The resulting material has a core-shell structure that displays excellent activity and selectivity in the self-dehydrogenation and hetero-dehydrogenation of primary amines to their corresponding imines. Furthermore, the catalyst exhibits excellent activity in the synthesis of secondary imines from substrates with various reducible functional groups (C=C, C≡C and C≡N) and amino acid derivatives.

A rational design of efficient trifunctional electrocatalysts derived from tailored Co2+-functionalized anionic metal-organic frameworks

Strategies for developing efficient energy conversion and storage devices that have been optimized by designing electrode materials is a critical challenge for researchers. Herein, we report the design and synthesis of a series of Co@NC trifunctional electrocatalysts derived from rationally designed cobalt-added anion MOF precursors and preliminarily reveal the relationship between the precursor and corresponding efficient electrocatalysts. Benefiting from the special composition of Co²⁺-doped anion MOFs involving Co²⁺ chelates as the Co²⁺ sources, the resulting CoT@NC electrocatalyst possesses abundant Co/Co-N_x/Co-O_x and multiple active nitrogen sites that are evenly distributed. As expected, the rich variety of active species and hierarchical pore structures endow CoT@NC with excellent performances toward ORR, HER, and OER, including a high half-wave potential value of 0.86 V for ORR and low overpotential values for OER (350 mV) and HER (209 mV) at 10 mA cm^-2 in an alkaline solution. Moreover, we assembled a conventional Zn-air battery with CoT@NC as the air-cathode catalyst, which exhibited excellent rechargeable performance and ultrahigh durability. Moreover, CoT@NC coated on Ni foam was used as both anode and cathode for the overall water-splitting process, which needed a bias voltage of 1.70 V to achieve a current density of 10 mA cm^-2. This study sheds light on the design, fabrication, and regulation of highly active cobalt-based electrocatalysts with abundant active sites and tunable pore structures for electrocatalysis and other applications.

Metal organic frameworks for biomass conversion

This review narrates the recent developments on the catalytic applications of pristine metal–organic frameworks (MOFs), functionalized MOFs, guests embedded over MOFs and MOFs derived carbon composites for biomass conversion into platform chemicals.