Anatase TiO2 Activated by Gold Nanoparticles for Selective Hydrodeoxygenation of Guaiacol to Phenolics

Selective C(aryl)-O bond cleavage in biorenewable phenolics

Biorefining of lignocellulosic biomass via a lignin first approach delivers a range of products with high oxygen content. Besides pulp, a lignin oil rich in guaiacols and syringols is obtained bearing multiple C(aryl)-OH and C(aryl)-OMe groups, typically named phenolics. Similarly, technical lignin can be used but is generally more difficult to process providing lower yields of monomers. Removal of the hydroxy and methoxy groups in these oxygenated arenes is challenging due to the inherently strong C-O bonds, in addition to the steric and electronic deactivation by adjacent -OH or -OMe groups. Moreover, chemoselective removal of a specific group in the presence of other similar functionalities is non-trivial. Other side-reactions such as ring saturation and transalkylation further complicate the desired reduction process. In this overview, three different selective reduction reactions are considered. Complete hydrodeoxygenation removes both hydroxy and methoxy groups resulting in benzene and alkylated derivatives (BTX type products) which is often complicated by overreduction of the arene ring. Hydrodemethoxylation selectively removes methoxy groups in the presence of hydroxy groups leading to phenol products, while hydrodehydroxylation only removes hydroxy groups without cleavage of methoxy groups giving anisole products. Instead of defunctionalization via reduction transformation of C(aryl)-OH, albeit via an initial derivatization into C(aryl)-OX, into other functionalities is possible and also discussed. In addition to methods applying guaiacols and syringols present in lignin oil as model substrates, special attention is given to methods using mixtures of these compounds obtained from wood/technical lignin. Finally, other important aspects of C-O bond activation with respect to green chemistry are discussed.

Advancements and Perspectives toward Lignin Valorization via O-Demethylation

Lignin represents the largest aromatic carbon resource in plants, holding significant promise as a renewable feedstock for bioaromatics and other cyclic hydrocarbons in the context of the circular bioeconomy. However, the methoxy groups of aryl methyl ethers, abundantly found in technical lignins and lignin-derived chemicals, limit their pertinent chemical reactivity and broader applicability. Unlocking the phenolic hydroxyl functionality through O-demethylation (ODM) has emerged as a valuable approach to mitigate this need and enables further applications. In this review, we provide a comprehensive summary of the progress in the valorization of technical lignin and lignin-derived chemicals via ODM, both catalytic and non-catalytic reactions. Furthermore, a detailed analysis of the properties and potential applications of the O-demethylated products is presented, accompanied by a systematic overview of available ODM reactions. This review primarily focuses on enhancing the phenolic hydroxyl content in lignin-derived species through ODM, showcasing its potential in the catalytic funneling of lignin and value-added applications. A comprehensive synopsis and future outlook are included in the concluding section of this review.

Hydrodeoxygenation of Oxygenates Derived from Biomass Pyrolysis Using Titanium Dioxide-Supported Cobalt Catalysts

Bio-oil upgrading to produce biofuels and chemicals has become an attractive topic over the past decade. However, the design of cost- and performance-effective catalysts for commercial-scale production remains a challenge. Herein, commercial titania (TiO2) was used as the support of cobalt (Co)-based catalysts (Co/TiO2) due to its low cost, high availability, and practicability for commercialization in the future. The Co/TiO2 catalysts were made with two different forms of TiO2 (anatase [TiO2-A] and rutile [TiO2-R]) and comparatively evaluated in the hydrodeoxygenation (HDO) of 4-propylguaicol (4PG), a lignin-derived model compound. Both Co/TiO2 catalysts promoted the HDO of 4PG following a similar pathway, but the Co/TiO2-R catalyst exhibited a higher activity in the early stages of the reaction due to the formation of abundant Ti3+ species, as detected by X-ray photoelectron spectroscopy (XPS) and hydrogen-temperature programed reduction (H2-TPR) analyses. On the other hand, the Co/TiO2-A catalyst possessed a higher acidity that enhanced propylcyclohexane production at prolonged reaction times. In terms of reusability, the Co/TiO2-A catalyst showed a higher stability (less Co leaching) and reusability compared to Co/TiO2-R, as confirmed by transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analyses. The HDO of the real bio-oil derived from pyrolysis of Leucaena leucocephala revealed that the Co/TiO2-A catalyst could convert high oxygenated aromatics (methoxyphenols, dimethoxyphenols, and benzenediols) to phenols and enhanced the phenols content, hinting at its potential to produce green chemicals from bio-feedstock.

Selective nucleophilic α-C alkylation of phenols with alcohols via Ti=Cα intermediate on anatase TiO2 surface

C-C bond forming reaction by alkylation of aryl rings is a main pillar of chemistry in the production of broad portfolios of chemical products. The dominant mechanism proceeds via electrophilic substitution of secondary and tertiary carbocations over acid catalysts, forming multiple aryl alkylation products non-selectively through all secondary and tertiary carbons in the alkyl chains but producing little α-C alkylation products because primary carbocations are poorly stable. Herein, we report that anatase TiO2 (TiO2-A) catalyzes nucleophilic α-C alkylation of phenols with alcohols in high selectivity to simply linear alkylphenols. Experimental and computational studies reveal the formation of Ti=C- bond with the α-carbon of the alkyl group at oxygen vacancies of the TiO2-A surface. The subsequent α-C alkylation by selective substitution of phenol ortho-C-H bond is verified by deuterium exchanged substrate and DFT calculations.

Crystal-Plane-Dependent Guaiacol Hydrodeoxygenation Performance of Au on Anatase TiO2

TiO2-supported catalysts have been widely used for a range of both liquid-phase and gas-phase hydrogenation reactions. However, little is known about the effect of their different crystalline surfaces on their activity during the hydrodeoxygenation process. In this work, Au supported on anatase TiO2, mainly exposing 101 or 001 facets, was investigated for the hydrodeoxygenation (HDO) of guaiacol. At 300 °C, the strong interaction between the Au and TiO2-101 surface resulted in the facile reduction of the TiO2-101 surface with concomitant formation of oxygen vacancies, as shown by the H2-TPR and H2-TPD profiles. Meanwhile, the formation of Auδ−, as determined by CO-DRIFT spectra and in situ XPS, was found to promote the demethylation of guaiacol producing methane. However, this strong interaction was absent on the Au/TiO2-001 catalyst since TiO2-001 was relatively difficult to be reduced compared with TiO2-101. The Au on TiO2-001 just served as the active site for the dissociation of hydrogen without the formation of Auδ−. The hydrogen atoms spilled over to the surface of TiO2-001 to form a small amount of oxygen vacancies, which resulted in lower activity than that over Au/TiO2-101. The catalytic activity of the Au/TiO2 catalyst for hydrodeoxygenation will be controlled by tuning the crystal plane of the TiO2 support.

Size-Dependent Strong Metal–Support Interactions of Rutile TiO2-Supported Ni Catalysts for Hydrodeoxygenation of m-Cresol

A series of rutile TiO2-supported Ni catalysts with varying Ni sizes were prepared and reduced at 650 °C to explore the effect of Ni size on the strong metal–support interactions (SMSI) and its consequences on the hydrodeoxygenation (HDO) of m-cresol at 350 °C and atmospheric pressure. When the Ni size increases from 4 to 29.1 nm, the SMSI becomes stronger, e.g., the thickness of the TiOx overlayer and the coverage extent of TiOx on the Ni particle surface increase. Direct deoxygenation to toluene is the dominant pathway on Ni/TiO2 catalysts with varying Ni loadings, with almost no CH4 being formed. These results indicate that the TiOx overlayer significantly alters the property of Ni. That is, the C-C hydrogenolysis activity on bare Ni is completely inhibited due to SMSI, while the deoxygenation activity is improved at the Ni-TiOx interfacial perimeter sites. Meanwhile, the turnover frequency of HDO on small Ni particles of 4 nm is > 2 times higher than that on large Ni particles of 29.1 nm, indicating that the small Ni particle with moderate SMSI appears to be optimal for the direct deoxygenation of m-cresol to toluene. The results suggest HDO activity may be enhanced by tuning the metal particle size and SMSI degree.

A unified view on catalytic conversion of biomass and waste plastics

Originating from the desire to improve sustainability, producing fuels and chemicals from the conversion of biomass and waste plastic has become an important research topic in the twenty-first century. Although biomass is natural and plastic synthetic, the chemical nature of the two are not as distinct as they first appear. They share substantial structural similarities in terms of their polymeric nature and the types of bonds linking their monomeric units, resulting in close relationships between the two materials and their conversions. Previously, their transformations were mostly studied and reviewed separately in the literature. Here, we summarize the catalytic conversion of biomass and waste plastics, with a focus on bond activation chemistry and catalyst design. By tracking the historical and more recent developments, it becomes clear that biomass and plastic have not only evolved their unique conversion pathways but have also started to cross paths with each other, with each influencing the landscape of the other. As a result, this Review on the catalytic conversion of biomass and waste plastic in a unified angle offers improved insights into existing technologies, and more importantly, may enable new opportunities for future advances.

Biomass and plastic share structural similarities in their composition and types of bond linkage between their monomeric units. Reviewing their catalytic conversion technologies in a unified angle provides new insights and opportunities for future advances.

One-Pot Synthesis of Al-P-O Catalysts and Their Catalytic Properties for O-Methylation of Catechol and Methanol

A series of Al-P-O catalysts (Al-xP-O) were prepared using a P123-assisted one-pot method at different P/Al molar ratios and used for O-methylation of catechol and methanol. The influences of the P/Al molar ratio and P123 addition on catalyst structure and surface acid-base characteristics were investigated in detail. Increasing the P/Al molar ratio more favored crystalline aluminophosphate. The P123-assisted Al³⁺ and PO₄³⁻ are known to be stabilized through weak steric force so that the formation of crystalline aluminophosphate could be inhibited at higher P/Al molar ratios. The results showed that the prepared Al-P-O catalysts possessed appropriate weak acid and weak base sites, which was beneficial to the reaction of catechol and methanol. The Al-1.1P-O catalyst synthesized with the assistance of P123 exhibited superior catalytic performances, with 52.5% catechol conversion and higher guaiacol selectivity of 97.6%.

Recovery of Arenes from Polyethylene Terephthalate (PET) over a Co/TiO2 Catalyst

Upcycling of spent plastics has become a more emergent topic than ever before due to the rapid generation of plastic waste associated with the change of lifestyles of the human society. Polyethylene terephthalate (PET) is a major aromatic plastic and herein, the conversion of PET back into arenes was demonstrated in a one-pot reaction combining depolymerization and hydrodeoxygenation (HDO) over a Co/TiO₂ catalyst. The effectiveness of the Co/TiO₂ catalyst in HDO and the underlining reaction pathway were established using the PET monomer terephthalic acid (TPA) as the substrate. Quantitative TPA conversion together with 75.2 mol% xylene and toluene selectivity under 30 bar initial H₂ pressure at 340 °C was achieved after 4 h reaction. More encouragingly, the catalyst induced both depolymerization and HDO reaction via C-O bond cleavage when PET was used as a substrate. 78.9 mol% arenes (toluene and xylene) was obtained under optimized conditions.

The Effect of Pristine and Hydroxylated Oxide Surfaces on the Guaiacol HDO Process: A DFT Study

The acid‐base character of oxide supports is crucial for catalytic reactions. In this work, the acid‐base properties of five oxide surfaces common in heterogeneous catalysis were investigated and related to their interaction with monolignol compounds derived from lignin. We have used density functional theory simulations also to understand the role of the surfaces’ hydroxylation state. The results show that moderate hydroxyl coverage on the amphoteric γ‐Al₂O₃ (110) slightly strengthens the oxy‐compounds’ adsorption due to an increase in Lewis acidity. Similarly, low hydroxyl coverage on the reducible TiO₂ (101) enlarges its adsorption capacity by up to 42 % compared with its clean surface. The higher affinity is attributed to the more favourable interaction between the surface‐OH groups and the aromatic rings. Overall, the results indicate that hydroxyl coverage enhances the amphoteric and reducible adsorption capacity towards aromatic species.

The Effect of Gold Nanoparticles on the Catalytic Activity of NiTiO3 for Hydrodeoxygenation of Guaiacol

Guaiacol is a typical model compound used to investigate and understand the hydrodeoxygenation behaviour of bio-oils, which is critical to their application as an alternative to fossil resources. While extensive research has been carried out on developing catalysts for guaiacol hydrodeoxygenation, the true active sites in these catalysts are often illusive. This study investigated the effect of Au-loading on the catalytic activity of NiTiO3 for the hydrodeoxygenation of guaiacol. It showed that metallic Ni formed by the partial reduction in NiTiO3 was responsible for its catalytic activity. Au-loading in NiTiO3 effectively reduces the temperature required for the NiTiO3 reduction from 400 °C to 300 °C. Consequently, at an Au-loading of 0.86 wt%, the 0.86 Au/NiTiO3-300 °C catalyst was found to deliver a guaiacol conversion of ~32%, more than 6 times higher than that of the pure NiTiO3-300 °C catalyst.

High Catalytic Performance and Sustainability of Zr Modified Aluminophosphate for Vapor-Phase Selective O-Methylation of Catechol with Methanol

Guaiacol produced by O-methylation of catechol with methanol over solid catalysts is a green environmental synthesis route. In order to achieve high catalytic efficiency, it is quite necessary to employ low-cost catalysts with high activity and stability. Herein, series of aluminophosphate catalysts were synthesized by a simple precipitation route modified by Zr. The characterization results indicated that the prepared Al-P-Zr catalysts possessed appropriate weak acid and weak base sites, which were beneficial for the O-methylation of catechol with methanol. Different Zr amount and calcined temperature exerted a significant influence on physicochemical properties of the catalysts and catalytic performance. The Al-P-Zr catalysts containing Zr/Al molar ratio of 0.012 calcined under 400 °C showed the optimal catalytic activity and long-term stability for vapor-phase selective O-methylation of catechol with methanol.

Identification of electron-rich mononuclear Ni atoms on TiO2-A distinguished from Ni particles on TiO2-R in guaiacol hydrodeoxygenation pathways

Electron-rich mononuclear Ni atoms located at the oxygen vacancies on TiO₂-A are the active sites for selective hydrodeoxygenation of guaiacol to phenolics, while the reduced Ni particles on TiO₂-R catalyze hydrogenative aromatic ring saturation.

Downstream Processing Strategies for Lignin-First Biorefinery

The lignin-first strategy has emerged as one of the most powerful approaches for generating novel platform chemicals from lignin by efficient depolymerization of native lignin. Because of the emergence of this novel depolymerization method and the definition of viable platform chemicals, future focus will soon shift towards innovative downstream processing strategies. Very recently, many interesting approaches have emerged that describe the production of valuable products across the whole value chain, including bulk and fine chemical building blocks, and several concrete examples have been developed for the production of polymers, pharmaceutically relevant compounds, or fuels. This Minireview provides an overview of these recent advances. After a short summary of catalytic systems for obtaining aromatic monomers, a comprehensive discussion on their separation and applications is given. This Minireview will fill the gap in biorefinery between deriving high yields of lignin monomers and tapping into their potential for making valuable consumer products.

Chemicals from Lignin: A Review of Catalytic Conversion Involving Hydrogen

Lignin is the most abundant biopolymer with aromatic building blocks and its valorization to sustainable chemicals and fuels has extremely great potential to reduce the excessive dependence on fossil resources, although such conversions remain challenging. The purpose of this Review is to present an insight into the catalytic conversion of lignin involving hydrogen, including reductive depolymerization and the hydrodeoxygenation of lignin-derived monomers to arenes, cycloalkanes and phenols, with a main focus on the catalyst systems and reaction mechanisms. The roles of hydrogenation sites (Ru, Pt, Pd, Rh) and acid sites (Nb, Ti, Mo), as well as their interaction in selective hydrodeoxygenation reactions are emphasized. Furthermore, some inspirational strategies for the production of other value-added chemicals are mentioned. Finally, some personal perspectives are provided to highlight the opportunities within this attractive field.

Product-oriented Direct Cleavage of Chemical Linkages in Lignin

Lignin is one of the most important biomacromolecules in the plant biomass and the largest renewable source of aromatic building blocks in nature. Selectively producing value-added chemicals from the catalytic transformation of renewable lignin is of strategic significance and meet sustainability targets owing to the excessive consumption of non-renewable petroleum resource, but remains a long-term challenge owing to the complexity of lignin structure. This Minireview provides a summary and perspective of the extensive research that provides insight into selectively catalytic transformations of lignin and its derived monomers via directed scissor of chemical linkages (C-O and C-C bonds) with product-oriented targets. Furthermore, some challenges and opportunities of lignin catalytic transformation are provided based on existing problems in this field for readers to discuss future research directions.

Thienylbenzotriazole promoted highly active gold nanoparticles supported on N-doped graphene as efficient catalysts in water and a mechanism exploration

Gold nanocomposite catalyzed alkylation of ketone with alcohol, alcohol and alcohol, particularly for amine and amine in water.

Advances in porous and nanoscale catalysts for viable biomass conversion

Solid catalysts with unique porosity and nanoscale properties play a promising role for efficient valorization of biomass into sustainable advanced fuels and chemicals.

Selective Production of Biobased Phenol from Lignocellulose-Derived Alkylmethoxyphenols

Lignocellulosic biomass is the only renewable source of carbon for the chemical industry. Alkylmethoxyphenols can be obtained in good yield from woody biomass by reductive fractionation, but these compounds are of limited value for large-scale applications. We present a method to convert lignocellulose-derived alkylmethoxyphenols to phenol that can be easily integrated in the petrochemical industry. The underlying chemistry combines demethoxylation catalyzed by a titania-supported gold nanoparticle catalyst and transalkylation of alkyl groups to a low-value benzene-rich stream promoted by HZSM-5 zeolite. In this way, phenol can be obtained in good yield, and benzene can be upgraded to more valuable propylbenzene, cumene, and toluene. We demonstrate that intimate contact between the two catalyst functions is crucial to transferring the methyl groups from the methoxy functionality to benzene instead of phenol. In a mixed-bed configuration, we achieved a yield of 60% phenol and 15% cresol from 4-propylguaiacol in a continuous one-step reaction at 350 °C at a weight hourly space velocity of ∼40 h^-1.

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the future considered as potential lignin-derived platform chemicals.

Hydrodeoxygenation of guaiacol over bimetallic Fe-alloyed (Ni, Pt) surfaces: reaction mechanism, transition-state scaling relations and descriptor for predicting C–O bond scission reactivity

Small means big: DFT-calculated C–O bond length of adsorbed intermediates can serve as a good descriptor for predicting the C–O bond scission reactivity of phenolics over metal catalysts.