Role of Heteronuclear Interactions in Selective H2 Formation from HCOOH Decomposition on Bimetallic Pd/M (M = Late Transition FCC Metal) Catalysts

Unveiling Competitive Adsorption in TiO2 Photocatalysis through Machine-Learning-Accelerated Molecular Dynamics, DFT, and Experimental Methods

The efficient harnessing of solar power for water treatment via photocatalytic processes has long been constrained by the challenge of understanding and optimizing the interactions at the photocatalyst surface, particularly in the presence of nontarget cosolutes. The adsorption of these cosolutes, such as natural organic matter, onto photocatalysts can inhibit the degradation of pollutants, drastically decreasing the photocatalytic efficiency. In the present work, computational methods are employed to predict the inhibitory action of a suite of small organic molecules during TiO2 photocatalytic degradation of para-chlorobenzoic acid (pCBA). Specifically, tryptophan, coniferyl alcohol, succinic acid, gallic acid, and trimesic acid were selected as interfering agents against pCBA to observe the resulting competitive reaction kinetics via bulk and surface phase reactions according to Langmuir-Hinshelwood adsorption dynamics. Experiments revealed that trimesic and gallic acids were most competitive with pCBA, followed by succinic acid. Density functional theory (DFT) and machine learning interatomic potentials (MLIPs) were used to investigate the molecular basis of these interactions. The computational findings showed that while the type of functional group did not directly predict adsorption affinity, the spatial arrangement and electronic interactions of these groups significantly influenced adsorption dynamics and corresponding inhibitory behavior. Notably, MLIPs, derived by fine-tuning models pretrained on a vastly larger dataset, enabled the exploration of adsorption behaviors over substantially longer periods than typically possible with conventional ab initio molecular dynamics, enhancing the depth of understanding of the dynamic interaction processes. Our study thus provides a pivotal foundation for advancing photocatalytic technology in environmental applications by demonstrating the critical role of molecular-level interactions in shaping photocatalytic outcomes.

AgPd nanocages sandwiched between a MXene nanosheet and PDA layer for photothermally improved catalytic activity and antibacterial properties

In this work, a MXene@AgPd/polydopamine (PDA) nanosheet with excellent photothermal conversion efficiency was successfully synthesized by a simple redox-oxidative polymerization method. Interestingly, AgPd bimetallic nanocrystals sandwiched between a MXene nanosheet and PDA layer have cage-like nanostructure, which is favorable for high catalytic efficiency and antibacterial performance. Importantly, the MXene@AgPd/PDA nanosheet exhibits good catalytic activity for the reduction of 4-nitrophenol (1.2 min^-1 mg^-1) and the catalytic dynamics can be improved by about 1.2 times under NIR (near-infrared light, 808 nm, and 2.5 W cm^-2) irradiation. As the PDA shell is well protected, the MXene@AgPd/PDA nanosheet retained more than 90% catalytic activity after 6 cycles. In addition, due to the presence of the Ag component, the MXene@AgPd/PDA nanosheet exhibited good antibacterial activity against both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Under near-infrared light irradiation, its antibacterial activity was further enhanced due to the NIR photothermal effect.

Hydrogen Evolution from Additive-Free Formic Acid Dehydrogenation Using Weakly Basic Resin-Supported Pd Catalyst

Hydrogen, as a noncarbon energy source, plays a significant role in future clean energy vectors. However, concerns about the safe storage and transportation of hydrogen gas limit its wide application. Featured with high H₂ volumetric density, nontoxicity, and nonflammability, formic acid (FA) is regarded as one of the most encouraging chemical hydrogen carriers. The search for heterogeneous catalysts with decent catalytic activity and stability for FA decomposition is one of the hottest research topics in this area. In this paper, three weakly basic resins with different functional groups, including D201 with -N⁺(CH₃)₃, D301 with -N(CH₃)₂, and D311 with -NH₂, were investigated as alternative catalyst supports for Pd catalysts. The prepared basic resin-supported Pd catalysts were evaluated for the FA dehydrogenation reaction under atmospheric pressure and temperatures ranging from 30 to 70 °C. The results showed that the catalytic activity of the three different resin-supported Pd catalysts follows the order of Pd/D201 > Pd/D301 > Pd/D311. Particularly, a high turnover frequency value of 547.6 h^-1 was achieved when employing Pd/D201 as the FA dehydrogenation reaction catalyst at 50 °C. The apparent activation energies for the three different Pd/resin catalysts were calculated, of which the Pd/D210 catalyst demonstrates the lowest activation energy of 42.9 kJ mol^-1. The reasons for the superior catalytic behavior, together with the reaction mechanism, were then investigated and illustrated.

Inverse Design of Nanoclusters for Light-Controlled CO2-HCOOH Interconversion

With global push of hydrogen economy, efficient scenarios for hydrogen storage, transportation, and generation are indispensable. Here we devise a strategy for controllable hydrogen fuel storage and retrieval via light-switched CO₂-to-HCOOH interconversion. To realize it, palladium sulfide nanocluster catalysts with multiple specific functionalities are directly searched by our home-developed inverse design approach based on genetic algorithm (IDOGA) and ab initio calculations. Over 500 low-energy Pd_xS_y (x + y ≤ 30) clusters are sieved through a multiobjective function combining stability, activity, optical absorption, and reduction capability of photocarriers. The structure-property relationships and key factors governing the trade-off among these stringent criteria are disclosed. Finally, 14 candidate Pd_xS_y clusters with proper sulfidation degree and high stability in an aqueous environment have been screened. Our IDOGA program provides a general approach for inverse search of nanoclusters with any designated elemental compositions and functionalities for any device applications.

Conversion of cyclic xylose into xylitol on Ru, Pt, Pd, Ni, and Rh catalysts: a density functional theory study

There is currently no theoretical study on the hydrogenation of xylose to xylitol on a catalyst's surface, limiting proper understanding of the reaction mechanisms and the design of effective catalysts. In this study, DFT techniques were used for the first time to investigate the mechanisms of xylose to xylitol conversion on five notable transition metal (TM) surfaces: Ru(0001), Pt(111), Pd(111), Rh(111), and Ni(111). Two transition state (TS) paths were investigated: TS Path A and TS Path B. The TS Path B, which was further subdivided into TS Path B1 and B2, was proposed to be the minimum energy path (MEP) for the reaction process. According to our computational results, the MEP for this reaction begins with the structural rearrangement of cyclic xylose into its acyclic form prior to step-wise hydrogenation. The rate-determining step (RDS) on Ru(0001), Pt(111), Pd(111), and Ni(111) was discovered to be the ring-opening process via C-O bond scission of cyclic xylose. On Rh(111), however, the RDS was found to be the first hydrogenation stage, leading to the hydrogenation intermediate. Furthermore, based on the RDS barrier, our results revealed that the activities of the tested TM surfaces follow the trend: Ru(0001) > Rh(111) ≥ Ni(111) > Pd(111) > Pt(111). This result demonstrates the higher activity of Ru(0001) compared to other surfaces used for xylose hydrogenation. It correlates with experimental trends in relation to Ru(0001) superiority and provides the basis for understanding the theoretical design of economical and more active catalysts for xylitol production.

Density functional study on formic acid decomposition on Pd(111) surface: a revisit and comparison with other density functional methods

The mechanism of formic acid decomposition on the Pd(111) surface has been investigated by several theoretical methods in previous studies, including PBE and PW91. These results indicated that the mechanism is different from different methods, and even by using the same method (i.e., PBE), the mechanism is also different. In this study, we have revisited the formic acid decomposition on Pd(111) surface by using another density functional RPBE and by including van der Waals interaction which is neglected in the previous studies. Our results showed that the formic acid is decomposed via O-H bond cleavage to form bi-HCOO^*, and the most favorable pathway is HCOOH^* → bi-HCOO^* + H^* → CO₂^* + 2H^*. The energy barrier is 0.55 eV at the rate-determining step. This conclusion is consistent with one of the PBE study. This demonstrated that computational methods have a great influence on the reaction mechanism, and care should be taken in selecting the appropriate computational methods.

Conformation-modulated three-dimensional electrocatalysts for high-performance fuel cell electrodes

Unsupported Pt electrocatalysts demonstrate excellent electrochemical stability when used in polymer electrolyte membrane fuel cells; however, their extreme thinness and low porosity result in insufficient surface area and high mass transfer resistance. Here, we introduce three-dimensionally (3D) customized, multiscale Pt nanoarchitectures (PtNAs) composed of dense and narrow (for sufficient active sites) and sparse (for improved mass transfer) nanoscale building blocks. The 3D-multiscale PtNA fabricated by ultrahigh-resolution nanotransfer printing exhibited excellent performance (45% enhanced maximum power density) and high durability (only 5% loss of surface area for 5000 cycles) compared to commercial Pt/C. We also theoretically elucidate the relationship between the 3D structures and cell performance using computational fluid dynamics. We expect that the structure-controlled 3D electrocatalysts will introduce a new pathway to design and fabricate high-performance electrocatalysts for fuel cells, as well as various electrochemical devices that require the precision engineering of reaction surfaces and mass transfer.

Formic acid dehydrogenation over PdNi alloys supported on N-doped carbon: synergistic effect of Pd-Ni alloying on hydrogen release

Bimetallic Pd₁Ni_x alloys supported on nitrogen-doped carbon (Pd₁Ni_x/N-C, x = 0.37, 1.3 and 3.6) exhibit higher activities than Pd/N-C towards dehydrogenation of formic acid (HCO₂H, FA). Density functional theory (DFT) calculations provided electronic and atomic structures, energetics and reaction pathways on Pd(111) and Pd₁Ni_x(111) surfaces of different Pd/Ni compositions. A density of states (DOS) analysis disclosed the electronic interactions between Pd and Ni revealing novel active sites for FA dehydrogenation. Theoretical analysis of FA dehydrogenation on Pd₁Ni_x(111) (x = 0.33, 1 and 3) shows that the Pd₁Ni₁(111) surface provides optimum H₂-release efficiency via a favorable 'HCOO pathway', in which a hydrogen atom and one of the two oxygen atoms of FA interact directly with surface Ni atoms producing adsorbed CO₂ and H₂. The enhanced efficiency is also attributed to the blocking of an unfavorable 'COOH pathway' through which a C-O bond is broken and side products of CO and H₂O are generated.

Pt-Ni Nanoalloys for H2 Generation from Hydrous Hydrazine

Hydrous hydrazine (N2H4∙H2O) is a candidate for a hydrogen carrier for storage and transportation due to low material cost, high hydrogen content of 8.0%, and liquid stability at room temperature. Pt and Pt nanoalloy catalysts have been welcomed by researchers for the dehydrogenation of hydrous hydrazine recently. Therefore, in this review, we give a summary of Pt nanoalloy catalysts for the dehydrogenation of hydrous hydrazine and briefly introduce the decomposition mechanism of hydrous hydrazine to prove the design principle of the catalyst. The chemical characteristics of hydrous hydrazine and the mechanism of dehydrogenation reaction are briefly introduced. The catalytic activity of hydrous hydrazine on different supports and the factors affecting the selectivity of hydrogen catalyzed by Ni-Pt are analyzed. It is expected to provide a new way for the development of high-activity catalysts for the dehydrogenation of hydrous hydrazine to produce hydrogen.

Single-atom Rh/N-doped carbon electrocatalyst for formic acid oxidation

To meet the requirements of potential applications, it is of great importance to explore new catalysts for formic acid oxidation that have both ultra-high mass activity and CO resistance. Here, we successfully synthesize atomically dispersed Rh on N-doped carbon (SA-Rh/CN) and discover that SA-Rh/CN exhibits promising electrocatalytic properties for formic acid oxidation. The mass activity shows 28- and 67-fold enhancements compared with state-of-the-art Pd/C and Pt/C, respectively, despite the low activity of Rh/C. Interestingly, SA-Rh/CN exhibits greatly enhanced tolerance to CO poisoning, and Rh atoms in SA-Rh/CN resist sintering after long-term testing, resulting in excellent catalytic stability. Density functional theory calculations suggest that the formate route is more favourable on SA-Rh/CN. According to calculations, the high barrier to produce CO, together with the relatively unfavourable binding with CO, contribute to its CO tolerance.

Anchoring Pt Single Atoms on Te Nanowires for Plasmon-Enhanced Dehydrogenation of Formic Acid at Room Temperature

Formic acid (HCOOH), as a promising hydrogen carrier, is renewable, safe, and nontoxic. However, the catalytic dehydrogenation of HCOOH is typically conducted at elevated temperature. Here, HCOOH decomposition is successfully achieved for hydrogen production on the developed Pt single atoms modified Te nanowires with the Pt mass loading of 1.1% (1.1%Pt/Te) at room temperature via a plasmon-enhanced catalytic process. Impressively, 1.1%Pt/Te delivers 100% selectivity for hydrogen and the highest turnover frequency number of 3070 h-1 at 25 °C, which is significantly higher than that of Pt single atoms and Pt nanoclusters coloaded Te nanowires, Pt nanocrystals decorated Te nanowires, and commercial Pt/C. A plasmonic hot-electron driven mechanism rather than photothermal effect domains the enhancement of catalytic activity for 1.1%Pt/Te under light. The transformation of HCOO* to CO2 δ -* on Pt atoms is proved to be the rate-determining step by further mechanistic studies. 1.1%Pt/Te exhibits tremendous catalytic activity toward the decomposition of HCOOH owing to its plasmonic hot-electron driven mechanism, which efficiently stimulates the rate-determining step. In addition, hot electrons generated by the Te atoms nearby Pt single atoms are regarded to directly inject into the reactants adsorbed and activated on Pt single atoms.

Nanoalloy Materials for Chemical Catalysis

Nanoalloys (NAs), which are distinctly different from bulk alloys or single metals, take on intrinsic features including tunable components and ratios, variable constructions, reconfigurable electronic structures, and optimizable performances, which endow NAs with fascinating prospects in the catalysis field. Here, the focus is on NA materials for chemical catalysis (except photocatalysis or electrocatalysis). In terms of composition, NA systems are divided into three groups, noble metal, base metal, and noble/base metal mixed NAs. Their design and fabrication for the optimization of catalytic performance are systematically summarized. Additionally, the correlations between the composition/structure and catalytic properties are also mentioned. Lastly, the challenges faced in current research are discussed, and further pathways toward their development are suggested.

CO oxidative coupling to dimethyl oxalate over Pd-Me (Me = Cu, Al) catalysts: a combined DFT and kinetic study

CO oxidative coupling to dimethyl oxalate (DMO) on Pd(111), Pd-Cu(111) and Pd-Al(111) surfaces was systematically investigated by means of density functional theory (DFT) together with periodic slab models and micro-kinetic modeling. The binding energy results show that Cu and Al can be fine substrates to stably support Pd. The favorable pathway for DMO synthesis on these catalysts starts from the formation of two COOCH₃ intermediates, followed by the coupling to each other, and the catalytic activity follows the trend of Pd-Al(111) > Pd(111) > Pd-Cu(111). Additionally, the formation of DMO is far favorable than that of dimethyl carbonate (DMC) on these catalysts. The results were further demonstrated by micro-kinetic modeling. Therefore, Pd-Al bimetallic catalysts can be applied in practice to effectively enhance the catalytic performance and greatly reduce the cost. This study can help with fine-tuning and designing of high-efficient and low-cost Pd-based bimetallic catalysts.

N-Doped graphene-supported PdCu nanoalloy as efficient catalyst for reducing Cr(vi) by formic acid

Reducing Cr(vi) to Cr(iii) with formic acid is desirable for environmental protection, but the sluggish kinetics limits its practical application, which currently motivates the intensive study of efficient catalysts for this redox reaction. Here bimetallic PdCu nanoalloy (∼5 nm in size) supported by N-doped graphene was synthesized through a one-pot hydrothermal process. The catalytic activity of PdCu nanoalloy highly depends on the Pd/Cu atomic ratio and N-doped graphene support. The obtained Pd₆Cu₄/NG shows superior catalysis towards the Cr(vi) reduction by formic acid with a high kinetic constant (k_n = 23.2 min^-1 mg^-1) and a low activation energy (E_a = 34.9 kJ mol^-1). Active H atoms were found to be the exact reductant for the Cr(vi) reduction, quite different from the reported H₂-reduction route. The enhanced catalysis originates from the electronic and geometric modification of active Pd after formation of PdCu alloy. Electron transfer from Cu to Pd enhances the electron density of Pd atoms, which favors the adsorption of the bridging formate intermediate and subsequent generation of active H atoms over PdCu/NG. The catalyst can be recycled five times without obvious loss of activity. Our work provides an example to explore the alloying effect on the catalytic behavior of PdCu alloy, which may shed light on developing other advanced nanoalloys for Cr(vi) reduction.