Mechanism of a Suzuki-Type Homocoupling Reaction Catalyzed by Palladium Nanocubes

Optimized bimetallic ratios for durable membrane catalyst-film reactors in treating nitrate-polluted water

Nitrate contamination of surface and ground water is a significant global challenge. Most current treatment technologies separate nitrate from water, resulting in concentrated wastestreams that need to be managed. Membrane Catalyst-film Reactors (MCfR), which utilize in-situ produced nanocatalysts attached to hydrogen-gas-permeable hollow-fiber membranes, offer a promising alternative for denitrification without generating a concentrated wastestream. In hydrogen-based MCfRs, bimetallic nano-scale catalysts reduce nitrate to nitrite and then further to di-nitrogen or ammonium. This study first investigated how different molar ratios of indium-to-palladium (In:Pd) catalytic films influenced denitrification rates in batch-mode MCfRs. We evaluated eleven In-Pd bimetallic catalyst films, with In:Pd molar ratios from 0.0029 to 0.28. Nitrate-removal exhibited a volcano-shaped dependence on In content, with the highest nitrate removal (0.19 mgNO3--N-min-1 L-1) occurring at 0.045 mol In/mol Pd. Using MCfRs with the optimal In:Pd loading, we treated nitrate-spiked tap water in continuous-flow for >60 days. Nitrate removal and reduction occurred in three stages: substantial denitrification in the first stage, a decline in denitrification efficiency in the second stage, and stabilized denitrification in the third stage. Factors contributing to the slowdown of denitrification were: loss of Pd and In catalysts from the membrane surface and elevated pH due to hydroxide ion production. Sustained nitrate removal will require that these factors be mitigated.

The Direct Mechanocatalytic Suzuki–Miyaura Reaction of Small Organic Molecules

The molecular Suzuki cross‐coupling reaction was conducted mechanochemically, without solvents, ligands, or catalyst powders. Utilizing one catalytically active palladium milling ball, products could be formed in quantitative yield in as little as 30 min. In contrast to previous reports, the adjustment of milling parameters led to the complete elimination of abrasion from the catalyst ball, thus enabling the first reported systematic catalyst analysis. XPS, in situ XRD, and reference experiments provided evidence that the milling ball surface was the location of the catalysis, allowing a mechanism to be proposed. The versatility of the approach was demonstrated by extending the substrate scope to deactivated and even sterically hindered aryl iodides and bromides.

Hydrodefluorination of Perfluorooctanoic Acid in the H2-Based Membrane Catalyst-Film Reactor with Platinum Group Metal Nanoparticles: Pathways and Optimal Conditions

PFAAs (perfluorinated alkyl acids) have become a concern because of their widespread pollution and persistence. A previous study introduced a novel approach for removing and hydrodefluorinating perfluorooctanoic acid (PFOA) using palladium nanoparticles (Pd⁰NPs) in situ synthesized on H₂-gas-transfer membranes. This work focuses on the products, pathways, and optimal catalyst conditions. Kinetic tests tracking PFOA removal, F^- release, and hydrodefluorination intermediates documented that PFOA was hydrodefluorinated by a mixture of parallel and stepwise reactions on the Pd⁰NP surfaces. Slow desorption of defluorination products lowered the catalyst's activity for hydrodefluorination. Of the platinum group metals studied, Pd was overall superior to Pt, Rh, and Ru for hydrodefluorinating PFOA. pH had a strong influence on performance: PFOA was more strongly adsorbed at higher pH, but lower pH promoted defluorination. A membrane catalyst-film reactor (MCfR), containing an optimum loading of 1.2 g/m² Pd⁰ for a total Pd amount of 22 mg, removed 3 mg/L PFOA during continuous flow for 90 days, and the removal flux was as high as 4 mg PFOA/m²/d at a steady state. The EPA health advisory level (70 ng/L) also was achieved over the 90 days with the influent PFOA at an environmentally relevant concentration of 500 ng/L. The results document a sustainable catalytic method for the detoxification of PFOA-contaminated water.

Adsorption and Reductive Defluorination of Perfluorooctanoic Acid over Palladium Nanoparticles

Per- and polyfluoroalkyl substances (PFASs) comprise a group of widespread and recalcitrant contaminants that are attracting increasing concern due to their persistence and adverse health effects. This study evaluated removal of one of the most prevalent PFAS, perfluorooctanoic acid (PFOA), in H₂-based membrane catalyst-film reactors (H₂-MCfRs) coated with palladium nanoparticles (Pd⁰NPs). Batch tests documented that Pd⁰NPs catalyzed hydrodefluorination of PFOA to partially fluorinated and nonfluorinated octanoic acids; the first-order rate constant for PFOA removal was 0.030 h^-1, and a maximum defluorination rate was 16 μM/h in our bench-scale MCfR. Continuous-flow tests achieved stable long-term depletion of PFOA to below the EPA health advisory level (70 ng/L) for up to 70 days without catalyst loss or deactivation. Two distinct mechanisms for Pd⁰-based PFOA removal were identified based on insights from experimental results and density functional theory (DFT) calculations: (1) nonreactive chemisorption of PFOA in a perpendicular orientation on empty metallic surface sites and (2) reactive defluorination promoted by physiosorption of PFOA in a parallel orientation above surface sites populated with activated hydrogen atoms (H_ads*). Pd⁰-based catalytic reduction chemistry and continuous-flow treatment may be broadly applicable to the ambient-temperature destruction of other PFAS compounds.

A green approach to DDT degradation and metabolite monitoring in water comparing the hydrodechlorination efficiency of Pd, Au-on-Pd and Cu-on-Pd nanoparticle catalysis

DDT (1,1,1-trichloro-2,2-bi(p-chlorophenyl)-ethane) and its metabolites (DDD, 1,1-dichloro-2,2-bis-(4'-chlorophenyl)ethane, and DDE, 1,1-dichloro-2,2-bis-(4'-chlorophenyl)ethylene) are persistent organic pollutants that can be catalytically degraded into a less toxic and less persistent compound. In this work, ecofriendly methodologies for catalyst synthesis, catalytic degradation of DDT and reaction monitoring have been proposed. Three types of Pd-based nanoparticles, NPs, (Pd, Au-on-Pd and Cu-on-Pd) were synthesized and used for catalytic hydrodechlorination of DDT and its metabolites. The structural and electronic properties of NPs were investigated using TEM and XAS spectroscopy. Au-on-Pd showed the highest hydrodechlorination efficiency within 1 h of reaction. To obtain the best reaction conditions, the effects of H₂ flow and base addition Au-on-Pd NPs activity were investigated. To study the effectiveness of the different NPs, a solvent-free analytical method was optimized to detect and measure DDT and its by-products. The SPME-GC-MS method provided low detection limits (0.03 μg L^-1) and high recovery (≥88.75%) and was a valuable tool for the NP degradation study. In this way, a green method for degradation and monitoring of DDT and its by-products in water was achieved.

A magnetically retrievable air and moisture stable gold and palladium nanocatalyst for efficient C-C coupling reactions

In this study, we report the synthesis of a highly stable, magnetically retrievable gold and palladium nanocatalyst (AuPd@AMNPs), highly active in Suzuki cross-coupling and related homocoupling reactions. The active catalytic component in this system is palladium, which can only be stabilized in the presence of gold nanoparticles. There is no significant loss of activity even after prolonged storage exposed air and moisture. The versatile nature AuPd@AMNPs is demonstrated through the selective catalysis of the homocoupling of phenylboronic acid under low concentrations of O₂ and the oxidation of phenylboronic acid to phenol under high O₂ concentrations. AuPd@AMNPs also demonstrated Ullmann-type homocoupling of 4-iodotolene with excellent yields. The magnetically retrieved catalyst could be re-used up to six times in Suzuki-Miyaura cross-coupling with consistently high activity and with a minimal loss of the noble metal species. Through these reactions we show that the gold-stabilized AuPd@AMNPs can be used as stable and recyclable palladium reservoir for multiple palladium-catalysed reactions.

Chitosan modified Ti-PILC supported PdOx catalysts for coupling reactions of aryl halides with terminal alkynes

Biopolymer of chitosan (CS) and titanium pillared clays (Ti-PILCs) have been combined in a hybrid as advanced supports for immobilization of PdOx=0,1 species to prepare novel PdOx=0,1@Ti-PILC/CS nano-composite catalysts. The Ti-PILC materials showed high specific surface areas and abundant meso-porous structure with many irregular pore channels caused by collapses of layered structure of clay during Ti pillaring process. Both CS chains and sub-nano sized PdOx particles were successfully incorporated into the pore channels of Ti-PILC, resulting in a decrease in both the specific surface areas and uniform distribution of pore size. Besides conventional methods characterizations, the strong interactions between PdOx species and Ti-PILC/CS support were further evidenced with positron annihilation lifetime spectroscopy studies. The resultant PdOx@Ti-PILC/CS catalyst was highly active for the coupling reactions of aryl halides with phenyl acetylenes. It was recyclable and gave excellent yield up to 13 runs with low leaching of Pd species.

Visible-Light-Enhanced Suzuki-Miyaura Reactions of Aryl Chlorides in Water with Pd NPs Supported on a Conjugated Nanoporous Polycarbazole

The visible-light-enhanced catalytic activation of aryl chlorides for Suzuki-Miyaura cross-coupling (SMC) reactions is highly challenging because of the strength of the C-Cl bond. In this work, palladium nanoparticles (Pd NPs) were grown on a conjugated nanoporous polycarbazole (CNP), named Pd/CNP. The hybrid material Pd/CNP could catalyze the SMC reactions of aryl chlorides with arylboronic acids in water under blue LED irradiation at room temperature with high efficiency. This protocol exhibited good functional group tolerance and the catalyst could be recycled without significant loss of its catalytic activity. CNP not only provided photogenerated electrons to enrich the electron density of the Pd NPs but also generated holes for the activation of the arylboronic acids.

Synergistic effect of the Pd–Ni bimetal/carbon nanofiber composite catalyst in Suzuki coupling reaction

A novel Pd₁Ni₄ bimetal nanocomposite catalyst was prepared and showed better performance than their monometallic counterpart. What's more, the catalyst could be reused ten times without significant change in catalytic activity, which met the request of sustainable chemistry.