Au–Carbon Electronic Interaction Mediated Selective Oxidation of Styrene

Synthesis, Optical, Dielectric, SHG, Magnetic and Visible Light Driven Catalytic Studies on Compounds Belonging to the Swedenborgite Structure

A new compound, InBaZn3 GaO7 , with swedenborgite structure along with transition metal (TM) substituted variants have also been prepared. The structure contains layers of tetrahedral ions (Zn2+ /Ga3+ ) connected by octahedrally coordinated In3+ ion forming the three-dimensional structure with voids where the Ba2+ ions occupy. The TM substituted compounds form with new colors. The origin of the color was understood based on the ligand-field transitions. The near IR reflectivity studies indicate that the Ni - substituted compounds exhibit good near - IR reflectivity behavior, making them possible candidates for 'cool pigments'. The temperature dependent dielectric studies indicate that the InBaZn3 GaO7 compound undergoes a phase transition at ~360 °C. The compounds are active towards second harmonic generation (SHG). Magnetic studies show the compounds, InBaZn2 CoFeO7 and InBaZn2 CuFeO7 to be anti-ferromagnetic in nature. The copper containing compounds were found to be good catalysts, under visible light, for the oxidation of aromatic alkenes. The many properties observed in the swedenborgite structure-based compounds suggests that the mineral structure offers a fertile ground to investigate newer compounds and properties.

Single-Atom Cobalt Catalysts Coupled with Peroxidase Biocatalysis for C-H Bond Oxidation

This paper reports a robust strategy to catalyze in situ C-H oxidation by combining cobalt (Co) single-atom catalysts (SACs) and horseradish peroxidase (HRP). Co SACs were synthesized using the complex of Co phthalocyanine with 3-propanol pyridine at the two axial positions as the Co source to tune the coordination environment of Co by the stepwise removal of axial pyridine moieties under thermal annealing. These structural features of Co sites, as confirmed by infrared and X-ray absorption spectroscopy, were strongly correlated to their reactivity. All Co catalysts synthesized below 300 °C were inactive due to the full coordination of Co sites in octahedral geometry. Increasing the calcination temperature led to an improvement in catalytic activity for reducing O2, although molecular Co species with square planar coordination obtained below 600 °C were less selective to reduce O2 to H2O2 through the two-electron pathway. Co SACs obtained at 800 °C showed superior activity in producing H2O2 with a selectivity of 82-85% in a broad potential range. In situ production of H2O2 was further coupled with HRP to drive the selective C-H bond oxidation in 2-naphthol. Our strategy provides new insights into the design of highly effective, stable SACs for selective C-H bond activation when coupled with natural enzymes.

Noble-Metal Nanoparticle-Embedded Silicon Nanogratings via Single-Step Laser-Induced Periodic Surface Structuring

Here, we show that direct femtosecond laser nanostructuring of monocrystalline Si wafers in aqueous solutions containing noble-metal precursors (such as palladium dichloride, potassium hexachloroplatinate, and silver nitrate) allows for the creation of nanogratings decorated with mono- (Pd, Pt, and Ag) and bimetallic (Pd-Pt) nanoparticles (NPs). Multi-pulse femtosecond-laser exposure was found to drive periodically modulated ablation of the Si surface, while simultaneous thermal-induced reduction of the metal-containing acids and salts causes local surface morphology decoration with functional noble metal NPs. The orientation of the formed Si nanogratings with their nano-trenches decorated with noble-metal NPs can be controlled by the polarization direction of the incident laser beam, which was justified, for both linearly polarized Gaussian and radially (azimuthally) polarized vector beams. The produced hybrid NP-decorated Si nanogratings with a radially varying nano-trench orientation demonstrated anisotropic antireflection performance, as well as photocatalytic activity, probed by SERS tracing of the paraaminothiophenol-to-dimercaptoazobenzene transformation. The developed single-step maskless procedure of liquid-phase Si surface nanostructuring that proceeds simultaneously with the localized reduction of noble-metal precursors allows for the formation of hybrid Si nanogratings with controllable amounts of mono- and bimetallic NPs, paving the way toward applications in heterogeneous catalysis, optical detection, light harvesting, and sensing.

Electrochemical oxidation of styrene to benzaldehyde by discrimination of spin-paired π electrons

The oxidation of styrene to benzaldehyde has been a considerable challenge in the electrochemical synthesis of organic compounds because styrene is more easily oxidized to benzoic acid. In this work, MnO₂ with an asymmetric electronic configuration is designed to discriminate the spin-paired π electrons of styrene. One of these discriminated π electrons combined with reactive oxygen species (ROS), ˙OH, ˙OOH, etc., produced simultaneously on a MnO₂/(Ru_0.3Ti_0.7)O₂/Ti bifunctional anode, to form benzaldehyde via Grob fragmentation, rather than benzoic acid. However, only benzoic acid is obtained from the oxidation of styrene on the anodes MOs/(Ru_0.3Ti_0.7)O₂/Ti, where MOs are other metal oxides with symmetric electronic configurations.

Gold Nanoparticles Immobilized in Porous Aromatic Frameworks with Abundant Metal Anchoring Sites as Heterogeneous Nanocatalysts

Porous aromatic frameworks (PAFs) with rich metal coordination sites are highly effective support materials for gold nanoparticles (AuNPs), which would not only prevent AuNPs agglomeration but also facilitate mass transfer during the catalytic process. In this work, PAF-160, -161, and -162 bearing diphosphine units are synthesized via the Friedel-Crafts alkylation reaction to act as efficient platforms for AuNPs immobilization. These PAFs possess high surface areas (up to 655 m2 g-1) together with excellent stabilities, and the different linkage lengths between P centers allow more scattered and accessible sites for gold coordination. In the resultant Au-PAFs, AuNPs with uniform sizes are stabilized dispersedly. The catalytic performances of these Au-PAFs are monitored by the reduction of 4-nitrophenol (4-NP), and all materials exhibit excellent catalytic activities on the reduction of 4-NP, especially Au-PAF-162 with the apparent rate constant (kapp) up to 0.019 s-1. Additionally, the reductions of various nitroarenes with different functional groups are explored and all Au-PAFs can convert most nitroaromatic derivatives to the corresponding arylamines with high conversions of 99%, in which the reaction mechanism is also proposed. Furthermore, a continuous catalytic device with Au-PAF-160 catalyst is explored, and Au-PAF-160 can convert 1-chloro-4-nitrobenzene, 2,6-dichoronitrobenzene and 1-chloro-2,4-dinitrobenzene into the corresponding amines in sequence in the continuous flow catalytic experiments. This work has enriched the variety of porous materials for noble metal immobilization and promotes their applications in heterogeneous catalysis.

Simultaneous Harvesting of Multiple Hot Holes via Visible-Light Excitation of Plasmonic Gold Nanospheres for Selective Oxidative Bond Scission of Olefins to Carbonyls

Using visible photoexcitation of gold nanospheres we successfully demonstrate the simultaneous harvesting of plasmon-induced multiple hot holes in the complete oxidative scission of the C=C bond in styrene at room temperature to selectively form benzaldehyde and formaldehyde, which is a reaction that requires activation of multiple substrates. Our results reveal that, while extraction of hot holes becomes efficient for interband excitation, harvesting of multiple hot holes from the excited Au nanospheres becomes prevalent only beyond a threshold light intensity. We show that the alkene oxidation proceeded via a sequence of two consecutive elementary steps; namely, a binding step and a cyclic oxometallate transition state as the rate-determining step. This demonstration of plasmon-excitation-mediated harvesting of multiple hot holes without the use of an extra hole transport media opens exciting possibilities, notably for difficult catalytic transformations involving multielectron oxidation processes.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Metal-Organic Frameworks Decorated Cu2O Heterogeneous Catalysts for Selective Oxidation of Styrene

The selective oxidation of styrene with highly efficient, environmentally benign, and cost-effective catalysts are of great importance for sustainable chemical processes. Here, we develop an in situ self-assembly strategy to decorate Cu-based metal-organic framework (MOF) Cu-BDC-NH2 nanocrystals on Cu2O octahedra to construct a series of Cu2O@Cu-BDC-NH2 catalysts for selective oxidation of styrene. Using H2O2 as green oxidants, the optimized sample of Cu2O@Cu-BDC-NH2-8h could achieve 85% styrene conversion with 76% selectivity of benzaldehyde under a mild condition of 40 °C. The high performance of the as-prepared heterogeneous catalysts was attributed to the well-designed Cu+/Cu2+ interface between Cu2O and Cu-BDC-NH2 as well as the porous MOF shells composed of the uniformly dispersed Cu-BDC-NH2 nanocrystals. The alkaline properties of Cu2O and the –NH2 modification of MOFs enable the reaction to be carried out in a base-free condition, which simplifies the separation process and makes the catalytic system more environmentally friendly. Besides the Cu2O octahedra (od-Cu2O), the Cu2O cuboctahedrons (cod-Cu2O) were synthesized by adjusting the added polyvinyl pyrrolidone, and the obtained cod-Cu2O@Cu-BDC-NH2 composite also showed good catalytic performance. This work provides a useful strategy for developing highly efficient and environmentally benign heterogeneous catalysts for the selective oxidation of styrene.

Pd-Pd/PdO as active sites on intercalated graphene oxide modified by diaminobenzene: fabrication, catalysis properties, synergistic effects, and catalytic mechanism

Pd–Pd/PdO nanoclusters well dispersed on intercalated graphene oxide (GO) (denoted as GO@PPD–Pd) were prepared and characterized. GO@PPD–Pd exhibited high catalytic activity (a TOF value of 60 705 h⁻¹) during the Suzuki coupling reaction, and it could be reused at least 6 times. The real active centre was Pd(200)–Pd(200)/PdO(110, 102). A change in the Pd facets on the surface of PdO was a key factor leading to deactivation, and the aggregation and loss of active centres was also another important reason. The catalytic mechanism involved heterogeneous catalysis, showing that the catalytic processes occurred at the interface, including substrate adsorption, intermediate formation, and product desorption. The real active centres showed enhanced negative charge due to the transfer of electrons from the carrier and ligands, which could effectively promote the oxidative addition reaction, and Pd(200) and the heteroconjugated Pd/PdO interface generated in situ also participated in the coupling process, synergistically boosting activity. Developed GO@PPD–Pd was a viable heterogeneous catalyst that may have practical applications owing to its easy synthesis and stability, and this synergistic approach can be utilized to develop other transition-metal catalysts.

Pd(200) and the Pd(200)/PdO(102, 110) interface generated in situ participated in coupling reactions via a synergistic effect, boosting the catalytic activity to a high level.

Infinite building blocks for directed self-assembly of a supramolecular polyoxometalate–cyclodextrin framework for multifunctional oxidative catalysis

With evolution from polyoxometalate-based molecular building blocks to infinite building blocks (IBBs), a supramolecular polyoxometalate–cyclodextrin framework was constructed by an IBB strategy for multifunctional oxidative catalysis.

Highly Efficient Dehydrogenation of Formic Acid over Binary Palladium-Phosphorous Alloy Nanoclusters on N-Doped Carbon

Highly efficient dehydrogenation of formic acid (FA) at room temperature is a safe and suitable way to obtain hydrogen and promote the development of hydrogen storage application. Herein, the phosphorous-alloyed Pd nanoclusters loading on nitrogen-doped carbon (PdP/NC) were prepared and recognized as the highly active nanocatalysts for the dehydrogenation of FA. The PdP/NCs with controlled sizes and compositions were prepared by an easy self-limiting synthesis in an aqueous solution. The best PdP/NC exhibited a remarkable catalytic activity with a high turnover frequency of ∼3253.0 h^-1 than the compared nanocatalysts for the dehydrogenation of FA at room temperature. The catalytic kinetics and durability studies showed that both the alloyed P in Pd crystals and doped N in the carbon support could effectively tailor the electronic states of the Pd surface and further optimize the adsorption energy of FA. Based on the Sabatier principle, the proper adsorption energy accelerated the dehydrogenation reaction and correspondingly enhanced the activity and durability. The work proposed a high-efficiency nanocatalyst for safe hydrogen generation and may be extended to create other similar nanocatalysts with different compositions and nanostructures.

The Pivotal Role of Hot Carriers in Plasmonic Catalysis of C-N Bond Forming Reaction of Amines

Here, we demonstrate the simultaneous utilization of both the hot carriers (electrons and holes) in the photocatalytic transformation of benzylamine to N-benzylidenebenzylamine and the scope of reaction has also been successfully demonstrated with catalytic oxidation of 4-methoxybenzylamine. The wavelength-dependent excitation of AuNP allows us to tune the potential energy of charge carriers relative to the redox potential of the reactants which leads to energetically favorable product formation on the nanoparticle surface. We capture the formation of reaction intermediates and products by using in situ Raman spectroscopy, complemented by NMR spectroscopy and GC-MS. Based on the experimental substantiations, a plausible reaction mechanism has been proposed.

Ultrafine Pd Nanoparticles Supported on Soft Nitriding Porous Carbon for Hydrogen Production from Hydrolytic Dehydrogenation of Dimethyl Amine-Borane

Simple and efficient synthesis of a nano-catalyst with an excellent catalytic property for hydrogen generation from hydrolysis of dimethyl amine-borane (DMAB) is a missing piece. Herein, effective and recycled palladium (Pd) nanoparticles (NPs) supported on soft nitriding porous carbon (NPC) are fabricated and applied for DMAB hydrolysis. It is discovered that the soft nitriding via a low-temperature urea-pretreatment induces abundant nitrogen-containing species on the NPC support, thus promoting the affinity of the Pd precursor and hindering the agglomeration of formed Pd NPs onto the NPC surface during the preparation process. Surface-clean Pd NPs with a diameter of sub-2.0 nm deposited on the NPC support (Pd/NPC) exhibit an outstanding catalytic performance with a turnover frequency (TOF) of 2758 h^-1 toward DMAB hydrolysis, better than many previous reported Pd-based catalysts. It should be emphasized that the Pd/NPC also possesses a good stability without an obvious decrease in catalytic activity for DMAB hydrolysis in five successive recycling runs. This study provides a facile but efficient way for preparing high-performance Pd catalysts for catalytic hydrogen productions.

Fluorochromic polymer films containing ultrasmall silver nanoclusters

Fluorochromic materials that change their emission properties in response to their environment are of interest for the development of sensors, optical data storage and light-emitting materials. A thermally fluorochromic elastic polymer film that exhibits remarkable fluorochromism (from red to yellow) and enhancement of fluorescence intensity after thermal treatment (>120 °C) is designed by the incorporation of silver nanoclusters. The thermal treatment also leads to a significant increase of quantum yield and fluorescence lifetime. It is found that the thermo-induced etching on larger silver nanoclusters generates smaller silver nanoclusters. This simple and efficient size-tuning process in solid state is responsible for the thermo-fluorochromism and enhancement of fluorescence emission from silver nanoclusters. Such a thermo-fluorochromic polymer material is finally demonstrated to be useful for thermo-printing. This material illustrates a new way to make smart optical materials, particularly for potential applications in optical data storage and soft OLED display.

Additional Lithium Storage on Dynamic Electrode Surface by Charge Redistribution in Inactive Ru Metal

Beyond a traditional view that metal nanoparticles formed upon electrochemical reaction are inactive against lithium, recently their electrochemical participations are manifested and elucidated as catalytic and interfacial effects. Here, ruthenium metal composed of ≈5 nm nanoparticles is prepared and the pure ruthenium as a lithium-ion battery anode for complete understanding on anomalous lithium storage reaction mechanism is designed. In particular, the pure metal electrode is intended for eliminating the electrochemical reaction-derived Li₂ O phase accompanied by catalytic Li₂ O decomposition and the interfacial lithium storage at Ru/Li₂ O phase boundary, and thereby focusing on the ruthenium itself in exploring its electrochemical reactivity. Intriguingly, unusual lithium storage not involving redox reactions with electron transfer but leading to lattice expansion is identified in the ruthenium electrode. Size-dependent charge redistribution at surface enables additional lithium adsorption to occur on the inactive but more environmentally sensitive nanoparticles, providing innovative insight into dynamic electrode environments in rechargeable lithium chemistry.

In situ replacement of Cu-DEN: an approach for preparing a more noble metal nanocatalyst for catalytic use

The advantage of dendritic monodisperse macromolecules’ dual templating ability was useful in the formation of silica-supported copper nanoparticles Cu_n@SiO₂NPs.

Facile Incorporation of Au Nanoparticles into an Unusual Twofold Entangled Zn(II)-MOF with Nanocages for Highly Efficient CO2 Fixation under Mild Conditions

Herein, a new porous Zn(II)-based metal-organic framework (MOF 1) has been prepared, the structure of which featured a twofold entangled motif based on two typical secondary building units (SBUs). The gas sorption studies indicated that MOF 1 may be explored as a useful platform to encapsulate metallic nanoparticles. Then the Au@1 composite has been prepared via a facile incorporation method without extra reducing agents. The Au@1 composite has been fully characterized by HRTEM, SEM-EDX, PXRD, gas sorption, XPS, ICP, etc. Catalytic experiments showed that the Au@1 composite had a perfect catalytic performance in CO₂ fixation for epoxides with different substituents under mild conditions.

Promoting Effect of Heterostructured NiO/Ni on Pt Nanocatalysts toward Catalytic Hydrolysis of Ammonia Borane

We report that heterostructured NiO/Ni nanoparticles remarkably promote the catalytic H₂ production of platinum (Pt) nanoclusters toward the hydrolysis of ammonia borane (AB). A hybrid nanocatalyst composed ultrasmall Pt nanoclusters, heterostructured NiO/Ni nanoparticles, and a carbon nanotube support (defined as Pt@NiO/Ni-CNT) is fabricated. The resultant Pt@NiO/Ni-CNT is highly efficient for room-temperature H₂ production toward catalytic hydrolysis of AB, better than the Pt@NiO-CNT and Pt@Ni-CNT with NiO or Ni alone, and the Pt@NiO/Ni without CNT support. Optimal Pt@NiO/Ni-CNT catalyst exhibits a good catalytic activity with a high TOF of 2665 mol_H2 mol_Pt^-1 min^-1 under ambient conditions, overtaking the activities of previously reported catalysts for AB hydrolysis. Catalytic kinetic studies indicate that compositional and structural features of the Pt@NiO/Ni-CNT synergistically accelerate the oxidative clearage of the H-OH bond from attacked H₂O (the rate-determining step), thus boosting catalytic hydrolysis of AB kinetically.

Engineering of Surface Environment of Pd Nanoparticle Catalysts on Carbon Support with Pyrene-Thiol Ligands for Semihydrogenation of Alkynes

A new type of pyrene-thiol derivative-modified Pd nanoparticle (NP) catalyst on a carbon black support for the efficient semihydrogenation of alkynes to alkenes is reported herein. Colloidal Pd NPs surrounded by pyrene-thiol modifiers were prepared using the two-phase Brust method followed by impregnation of carbon black materials. Based on the structural characterization of the prepared catalyst (PyC₁₂S-Pd/VC) by NMR, UV-vis, FT-IR, TEM, HAADF-STEM, Pd K-edge XAFS, XRD, N₂ adsorption, and XPS, we show that highly dispersed Pd NPs are immobilized on the catalysts via π-π interaction between pyrene groups bound to the Pd NPs and carbon black supports. PyC₁₂S-Pd/VC efficiently catalyzes the alkyne semihydrogenation reaction while maintaining high alkene selectivity; an alkene selectivity of 94% is attained at 98% conversion after 5 h of reaction, and the selectivity was retained around 80% in 10 h of reaction. This performance is superior to that of a catalyst without pyrene groups and that of a commercial Lindlar catalyst. The steric hindrance of pyrene groups restricts access of the substrates to Pd NP surfaces, suppressing the unfavorable overhydrogenation of alkenes to alkanes, which is revealed by the solvent and substrate dependency on the catalytic performance and a DFT calculation study. Furthermore, the high selectivity and stability of PyC₁₂S-Pd/VC are caused by the strong interaction between pyrene groups and carbon supports, which prevents the separation of pyrene modifiers and the leaching or sintering of Pd NPs during the catalytic reaction. It is demonstrated that the combination of Pd NPs, pyrene-thiol modifiers, and carbon supports offers high activity, alkene selectivity, and stability in the semihydrogenation reaction.

Electrochemical Growth of Metallic Nanoparticles onto Immobilized Polymer Brush Ionic Liquid as a Hybrid Electrocatalyst for the Hydrogen Evolution Reaction

Platinum and palladium are the first choice electrocatalysts to drive the hydrogen evolution reaction. In this report, surface modification was introduced as a potential approach to generate hybrid electrocatalyst. The immobilized polymer brush, poly(1-allyl-3-methylimidazolium) (PAMI), was used as a nanostructured template for guiding the electrochemical deposition of metallic nanoparticles (Pd, Pt). The intrinsic properties of the polymer brush in term of nanostructured architecture and the anions mobility within the polymer was exploited to generate a hybrid electrocatalyst. The latter was generated using two different approaches including the direct electrochemical deposition of Pd or Pt metal and the indirect approach through the anion exchange reaction followed by the electrochemical deposition under self-electrolytic conditions. The hybrid structure based on the polymer/metallic NP exhibits an enhancement of the catalytic performance toward hydrogen evolution reaction with a low Tafel slope and overpotential. Interestingly, the indirect approach leads to decrease the metal loading by two orders of magnitude, when compared to those generated in the absence of the polymeric layer, while retaining the electrocatalytic performance.

Hierarchical hollow nickel silicate microflowers for selective oxidation of styrene

Developing heterogeneous non-precious metal catalysts that can achieve high catalytic activity and good product selectivity at the same time is still a challenging and interesting work for the selective oxidation of styrene into valuable chemicals from environmental and industrial points of view. Herein, hierarchical hollow nickel silicate (Ni₃Si₂O₅(OH)₄) microflowers assembled from well-defined Ni₃Si₂O₅(OH)₄ nanosheets have been prepared by a facile one-pot hydrothermal method. The intriguing structure endows the hollow Ni₃Si₂O₅(OH)₄ microflowers a high surface area of 177.4 m² g^-1 and an average pore size of 3.9 nm. When employed as a catalyst for the selective oxidation of styrene in the presence of hydrogen peroxide as a ecological sustainable green oxidant, the Ni₃Si₂O₅(OH)₄ exhibits an attractive catalytic performance with a remarkably high styrene conversion of 99.3% and a high selectivity of 81.1% to benzaldehyde.

Encapsulation of Metal Nanoparticle Catalysts Within Mesoporous Zeolites and Their Enhanced Catalytic Performances: A Review

Metal nanoparticles (NPs) exhibit desired activities in various catalytic reactions. However, the aggregation and sintering of metal NPs usually cause the loss of catalytic performance in practical reaction processes. Encapsulation of catalytically active metal NPs on/within a high-surface-area inorganic support partially resolve such concerns. Microporous zeolites, owing to their rigid frameworks and porous structural features, have been considered as one of ideal inorganic supports. Metal NPs can be easily encapsulated and stabilized within zeolitic frameworks to prevent unwished aggregation during the catalysis. Unfortunately, sole microporous nanochannels (generally <1 nm) in conventional zeolites are not easy to be accessed. The introduction of another set of nanochannel (e.g., mesopore), known as mesoporous zeolites, can greatly improve the mass-transfer efficiency, which is structurally beneficial for most catalytic reactions. The coexistence of micropores and mesopores in inorganic supports provides the synergetic advantages of both fine confinement effect for metal NPs and easy diffusion for organic reactants/intermediates/products. This review focuses on the recent advances in the design and synthesis of mesoporous zeolites-encapsulated metal NP catalysts as well as their desired catalytic performances (activity and stability) in organic reactions. We first discuss the advantages of mesoporous zeolites as the supports and present general strategies for the construction of mesoporous zeolites. Then, the preparation methods on how to encapsulate NP catalysts within both microporous and mesoporous zeolites are clearly demonstrated. Third, some recent important cases on catalytic applications are presented to verify structural advantages of mesoporous zeolite supports. Within the conclusion, the perspectives on future developments in metal NP catalysts encapsulated within mesoporous zeolites are lastly discussed.

Gold nanocatalysts supported on carbon for electrocatalytic oxidation of organic molecules including guanines in DNA

Gold (Au) is chemically stable and resistant to oxidation. Although bulk Au is catalytically inert, nanostructured Au exhibits unique size-dependent catalytic activity. When Au nanocatalysts are supported on conductive carbon (denoted as Au@C), Au@C becomes promising for a wide range of electrochemical reactions such as electrooxidation of alcohols and electroreduction of carbon dioxide. In this mini-review, we summarize Au@C nanocatalysts with specific attention on the most recent achievements including the findings in our own laboratories, and show that Au nanoclusters (AuNCs, <2 nm) on nitrided carbon are excellent electrocatalysts for the oxidation of organic molecules including guanines in DNA. The state-of-the-art synthesis and characterization of these nanomaterials are also documented. Synergistic interactions among Au-containing multicomponents on carbon supports and their applications in electrocatalysis are discussed as well. Finally, challenges and future outlook for these emerging and promising nanomaterials are envisaged.

Ultrafine Pd Nanoparticles Anchored on Nitrogen-Doping Carbon for Boosting Catalytic Transfer Hydrogenation of Nitroarenes

The catalytic performance of metal particles is closely related to the particle size. In this article, ultrafine palladium nanoparticles anchored on nitrogen-doping carbon support (Pd/N-XC72R) were fabricated, wherein the N-XC72R was prepared through low-temperature annealing of Vulcan XC72R carbon with urea at 300 °C. Nitrogen dopant on the surface of carbon support can remarkably strengthen the affinity of the metal nanoparticles onto the support. Compared with the Vulcan XC-72R-supported Pd catalyst, the prepared Pd/N-XC72R delivered superior catalytic activity for the transfer hydrogenation of nitroarenes with formic acid as the hydrogen donor at ambient temperature. Our strategy may provide an effective and feasible approach to fabricate N-functionalized carbon materials and construct high-performance ultrasmall metal nanoparticle heterogeneous catalysts.

Ultrasmall Au nanocatalysts supported on nitrided carbon for electrocatalytic CO2 reduction: the role of the carbon support in high selectivity

Au is one of the most promising electrocatalysts to convert CO2 into CO in an aqueous-phase electrochemical reduction. However, ultrasmall Au nanocatalysts (AuNCs, <2 nm) have proven to be favorable for water reduction over CO2, although they possess a large surface-to-volume ratio and potentially are ideal for CO2 reduction. We herein report that ultrasmall AuNCs (1.9 ± 0.3 nm) supported on nitrided carbon are remarkably active and selective for CO2 reduction. The mass activity for CO of AuNCs reaches 967 A g-1 with a faradaic efficiency for CO of ∼83% at -0.73 V (vs. reversible hydrogen electrode) that is an order of magnitude more active than the state-of-the-art results. The high activity is endowed by the large surface area per unit weight and the high selectivity of ultrasmall AuNCs for CO2 reduction originates from the cooperative effect of Au and the nitrided carbon support where the surface N sites act as Lewis bases to increase the surface charge density of AuNCs and enhance the localized concentration of CO2 nearby catalytically active Au sites. We show that our results can be applied to other pre-synthesized Au catalysts to largely improve their selectivity for CO2 reduction by 50%. Our method is expected to illustrate a general guideline to effectively lower the cost of Au catalysts per unit weight of the product while maintaining its high selectivity for CO2 reduction.

Carbon nitride supported Fe2 cluster catalysts with superior performance for alkene epoxidation

Sub-nano metal clusters often exhibit unique and unexpected properties, which make them particularly attractive as catalysts. Herein, we report a "precursor-preselected" wet-chemistry strategy to synthesize highly dispersed Fe2 clusters that are supported on mesoporous carbon nitride (mpg-C3N4). The obtained Fe2/mpg-C3N4 sample exhibits superior catalytic performance for the epoxidation of trans-stilbene to trans-stilbene oxide, showing outstanding selectivity of 93% at high conversion of 91%. Molecular oxygen is the only oxidant and no aldehyde is used as co-reagent. Under the same condition, by contrast, iron porphyrin, single-atom Fe, and small Fe nanoparticles (ca. 3 nm) are nearly reactively inert. First-principles calculations reveal that the unique reactivity of the Fe2 clusters originates from the formation of active oxygen species. The general applicability of the synthesis approach is further demonstrated by producing other diatomic clusters like Pd2 and Ir2, which lays the foundation for discovering diatomic cluster catalysts.

Engineering nanoporous organic frameworks to stabilize naked Au clusters: a charge modulation approach

A simple charge modulation approach has been developed to stabilize naked Au clusters on a nanoporous conjugated organic network. Through engineering pore walls with regulated charges, the controllable growth of Au nanoclusters has been realized. The resulting supported catalyst exhibits excellent performance in the aerobic oxidation of alcohols.

Polyoxometalate-Based Metal-Organic Frameworks for Selective Oxidation of Aryl Alkenes to Aldehydes

Polyoxometalates (POMs) show considerable catalytic performance toward the selective oxidation of alkenes to aldehydes, which is commercially valuable for the production of pharmaceuticals, dyes, perfumes, and fine chemicals. However, the low specific surface area of POMs as heterogeneous catalysts and poor recyclability as homogeneous catalysts have hindered their wide application. Dispersing POMs into metal-organic frameworks (MOFs) for the construction of POM-based MOFs (POMOFs) suggests a promising strategy to realize the homogeneity of heterogeneous catalysis. Herein, we report two new POMOFs with chemical formulas of [Co(BBTZ)₂][H₃BW₁₂O₄₀]·10H₂O (1) and [Co₃(H₂O)₆(BBTZ)₄][BW₁₂O₄₀]·NO₃·4H₂O (2) (BBTZ = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene) for the selective oxidation of alkenes to aldehydes. Compound 1 possesses a non-interpenetrated three-dimensional (3D) cds-type open framework with a 3D channel system. Compound 2 displays a 3D polyrotaxane framework with one-dimensional channels along the [100] direction. In the selective oxidation of styrene into benzaldehyde, compound 1 can achieve a 100% conversion in 4 h with 96% selectivity toward benzaldehyde, which is superior to that of compound 2. A series of control experiments reveal that the co-role of [BW₁₂O₄₀]^5- and Co²⁺ active center as well as a more open framework feature co-promote the catalytic property of the POMOFs in this case. This work may suggest a new option for the development of POMOF catalysts in the selective oxidation of alkenes.

Bimetal-organic frameworks for functionality optimization: MnFe-MOF-74 as a stable and efficient catalyst for the epoxidation of alkenes with H2O2

In this work, we synthesized a series of microcrystalline Mn_xN_100-x-MOF-74 (N = Fe, Co and Ni) materials by a one-pot reaction. Powder X-ray diffraction (PXRD) patterns of Mn_xN_100-x-MOF-74 matched well with those of single-metal MOF-74, and the scanning electron microscopy (SEM) images exhibited homogeneous nanocrystallites aggregated together. The amounts and dispersion of metals were analyzed by using inductively coupled plasma (ICP) and energy-dispersive X-ray spectroscopy (EDS), separately. Mn_xN_100-x-MOF-74 could remain crystalline and efficiently catalyze the epoxidation of alkenes in DMF with NaHCO₃ and 30% H₂O₂. In particular, Mn_29.39Fe_70.61-MOF-74 can achieve almost 100% conversion for styrene with 95.0% selectivity towards styrene oxide and be reused at least five times without loss of activity.