The Surface Chemistry of Metal-Based Hydrogenation Catalysis

Hybrid RPA:DFT Approach for Adsorption on Transition Metal Surfaces: Methane and Ethane on Platinum (111)

The hybrid QM:QM approach is extended to adsorption on transition metal surfaces. The random phase approximation (RPA) as the high-level method is applied to cluster models and, using the subtractive scheme, embedded in periodic models which are treated with density functional theory (DFT) that is the low-level method. The PBE functional, both without dispersion and augmented with the many-body dispersion (MBD), is employed. Adsorption of methane and ethane on the Pt(111) surface is studied. For methane in a 2 × 2 surface cell, the hybrid RPA:PBE and RPA:PBE+MBD results, -14.3 and -16.0 kJ mol-1, respectively, are in close agreement with the periodic RPA value of -13.8 kJ mol-1 at significantly reduced computational cost (factor of ∼50). For methane and ethane, the RPA:PBE results (-14.3 and -17.8 kJ mol-1, respectively) indicate underbinding relative to energies derived from experimental desorption barriers for relevant loadings (-15.6 ± 1.6 and -27.2 ± 2.9 kJ mol-1, respectively), whereas the hybrid RPA:PBE+MBD results (-16.0 and -24.9 kJ mol-1, respectively) agree with the experiment well within experimental uncertainty limits (deviation of -0.4 ± 1.5 and +2.3 ± 2.9 kJ mol-1, respectively). Finding a cluster that adequately and robustly represents the adsorbate at the bulk surface is important for the success of the RPA-based QM:QM scheme for metals.

Design and Synthesis of N-Doped Carbons as Efficient Metal-Free Catalysts in the Hydrogenation of 1-Chloro-4-Nitrobenzene

Metal-free catalysts based on nitrogen-doped porous carbons were designed and synthesized from mixtures of melamine as nitrogen and carbon sources and calcium citrate as carbon source and porogen system. Considering the physicochemical and textural properties of the prepared carbons, a melamine/citrate ratio of 2:1 was selected to study the effect of the pyrolysis temperature. It was observed that a minimum pyrolysis temperature of 750 °C is required to obtain a carbonaceous structure. However, although there is a decrease in the nitrogen amount at higher pyrolysis temperatures, a gradual development of the porosity is produced from 750 °C to 850 °C. Above that temperature, a deterioration of the carbon porous structure is produced. All the prepared carbon materials, with no need for a further activation treatment, were active in the hydrogenation reaction of 1-chloro-4-nitrobenzene. A full degree of conversion was reached with the most active catalysts obtained from 2:1 melamine/citrate mixtures pyrolyzed at 850 °C and 900 °C, which exhibited a suitable compromise between the N-doping level and developed mesoporosity that facilitates the access of the reactants to the catalytic sites. What is more, all the materials showed 100% selectivity for the hydrogenation of the nitro group to form the corresponding chloro-aniline.

Recent advances in the selective semi-hydrogenation of alkyne to (E)-olefins

Considering the potential importance and upsurge in demand, the selective semi-hydrogenation of alkynes to (E)-olefins has attracted significant interest. This article highlights the recent advances in newer technologies and important methodologies directed to (E)-olefins from alkynes developed from 2015 to 2023. Notable features summarised include the catalyst or ligand design and control of product selectivity based on precious and nonprecious metal catalysts for semi-hydrogenation to (E)-olefins. Mechanistic studies for various catalytic transformations, including synthetic application to bioactive compounds, are summarised.

Use of Co3O4 nanoparticles with different surface morphologies for removal of toxic substances and investigation of antimicrobial activities via in vivo studies

Co3O4 nanoparticles (NPs) were formed using hydrothermal synthesis method and various surfactants to study the effect of changing surface morphology on catalytic and antibacterial activities. FT-IR, TEM, SEM, BET, XRD, and XPS analyses were performed to characterize the NPs. It was observed that as the morphology of Co3O4 changes, it creates differences in the reduction efficiency of organic dyes and p-nitrophenol (p-NP), which are toxic to living organisms and widely used in industry. The reaction rate constants (Kapp) for Co3O4-urea, Co3O4-ed, and Co3O4-NaOH in the reduction of p-NP were found to be 1.86 × 10-2 s-1, 1.83 × 10-2 s-1, and 2.4 × 10-3 s-1, respectively. In the presence of Co3O4-urea catalyst from the prepared nanoparticles, 99.29% conversion to p-aminophenol (p-AP) was observed, while in the presence of the same catalyst, 98.06% of methylene blue (MB) was removed within 1 h. The antibacterial activity of Co3O4 particles was compared with five standard antibiotics for both gram-positive and gram-negative bacteria. The results obtained indicate that the antimicrobial activity of the synthesized Co3O4 particles has a remarkable inhibitory effect on the growth of various pathogenic microorganisms. The current work could be an innovative and beneficial search for both biomedical and wastewater treatment applications.

Synthesis and Characterization of Stable Cu-Pt Nanoparticles under Reductive and Oxidative Conditions

We report a synthesis method for highly monodisperse Cu-Pt alloy nanoparticles. Small and large Cu-Pt particles with a Cu/Pt ratio of 1:1 can be obtained through colloidal synthesis at 300 °C. The fresh particles have a Pt-rich surface and a Cu-rich core and can be converted into an intermetallic phase after annealing at 800 °C under H₂. First, we demonstrated the stability of fresh particles under redox conditions at 400 °C, as the Pt-rich surface prevents substantial oxidation of Cu. Then, a combination of in situ scanning transmission electron microscopy, in situ X-ray absorption spectroscopy, and CO oxidation measurements of the intermetallic CuPt phase before and after redox treatments at 800 °C showed promising activity and stability for CO oxidation. Full oxidation of Cu was prevented after exposure to O₂ at 800 °C. The activity and structure of the particles were only slightly changed after exposure to O₂ at 800 °C and were recovered after re-reduction at 800 °C. Additionally, the intermetallic CuPt phase showed enhanced catalytic properties compared to the fresh particles with a Pt-rich surface or pure Pt particles of the same size. Thus, the incorporation of Pt with Cu does not lead to a rapid deactivation and degradation of the material, as seen with other bimetallic systems. This work provides a synthesis route to control the design of Cu-Pt nanostructures and underlines the promising properties of these alloys (intermetallic and non-intermetallic) for heterogeneous catalysis.

Crotonaldehyde Adsorption on Cu-Pt Surface Alloys: A Quantum Mechanics Study

The adsorption of crotonaldehyde on Cu-Pt alloy surfaces was characterized by density functional theory (DFT). Two surfaces were considered: Cu2Pt/Cu(111) and Cu3Pt/Cu(111). It was determined that the presence of Pt on the surface, even when isolated as single atoms fully surrounded by Cu, provides additional stability for the adsorbates, increasing the magnitude of the adsorption energy by as much as 40 kJ/mol. The preferred bonding on both surfaces is via multiple coordination, with the most stable configuration being a cis arrangement with di-σ bonding of the C=O bond across a Cu–Cu bridge and an additional π bonding to a Pt atom. The fact that Pt significantly affects the adsorption of unsaturated aldehydes such as crotonaldehyde explains why the kinetics of their hydrogenation using single-atom alloy (SAA) catalysts vary with alloy composition, as we previously reported, and brings into question the simple model in which the role of Pt is only to promote the dissociation of H2.

Dual functional catalysis of [Nb6O19]8--modified Au/Al2O3

A catalyst prepared by modifying the surface of Au nanoparticles (NPs) on Al₂O₃ with [Nb₆O₁₉]^8- clusters had specific base and reduction abilities, and the reduction of p-nitrophenol to p-aminophenol using H₂ as a reductant proceeded efficiently with the dual functional catalyst. At the interface between Au NPs and basic [Nb₆O₁₉]^8-, heterolytically cleaved hydrogen species are generated, which can efficiently react with nitrophenolate ions generated by base catalysis. Moreover, this surface modification strategy was applicable to the reduction of other nitro compounds.

New Analysis Method for Adsorption in Gas (H2, CO)-Solid (SnO2) Systems Based on Gas Sensing

The chemisorption phenomenon is widely used in the explanation of catalysis, gas-solid reactions, and gas sensing mechanisms. Generally, some properties of adsorbents, such as adsorption sites and dispersion, can be predicted by traditional methods through the variation of the chemisorption capacity with the temperature, pressure, and gas-solid interaction potential. However, these methods could not capture the information of the interaction between adsorbents, the adsorption rate, and the competitive adsorption relationship between adsorbents. In this paper, metal oxide semiconductors (MOSs) are employed to study the adsorption behavior. The gas sensing responses (GSRs) of MOSs caused by the gas adsorption process are measured as a new method to capture some adsorption behaviors, which are impossible for the traditional methods to obtain. The following adsorption behaviors characterized by this new method are presented for the first time: (1) distinguishing the adsorption type using an example of two reducing gases: the adsorption type of the two gases is single-molecular layer adsorption in this work; (2) detecting the interaction between different gases: this will be a promising method to provide original characterization data in the fields of gas-solid reaction mechanisms and heterogeneous catalysis; and (3) measuring the adsorption rate based on the GSR.

Induction Heating of Magnetically Susceptible Nanoparticles for Enhanced Hydrogenation of Oleic Acid

Radio frequency (RF) induction heating was compared to conventional thermal heating for the hydrogenation of oleic acid to stearic acid. The RF reaction demonstrated decreased coke accumulation and increased product selectivity at comparable temperatures over mesoporous Fe₃O₄ catalysts composed of 28-32 nm diameter nanoparticles. The Fe₃O₄ supports were decorated with Pd and Pt active sites and served as the local heat generators when subjected to an alternating magnetic field. For hydrogenation over Pd/Fe₃O₄, both heating methods gave similar liquid product selectivities, but thermogravimetric analysis-differential scanning calorimetry measurements showed no coke accumulation for the RF-heated catalyst versus 6.5 wt % for the conventionally heated catalyst. A different trend emerged when hydrogenation over Pt/Fe₃O₄ was performed. Compared to conventional heating, the RF increased the selectivity to stearic acid by an additional 15%. Based on these results, RF heating acting upon a magnetically susceptible nanoparticle catalyst would also be expected to positively impact systems with high coking rates, for example, nonoxidative dehydrogenations.

Hydrogen spillover assisted by oxygenate molecules over nonreducible oxides

Spontaneous migration of atomic hydrogen species from metal particles to the surface of their support, known as hydrogen spillover, has been claimed to play a major role in catalytic processes involving hydrogen. While this phenomenon is well established on reducible oxide supports, its realization on much more commonly used non-reducible oxides is still challenged. Here we present a general strategy to enable effective hydrogen spillover over non-reducible SiO₂ with aid of gaseous organic molecules containing a carbonyl group. By using hierarchically-porous-SiO₂-supported bimetallic Pt-Fe catalysts with Pt nanoparticles exclusively deposited into the micropores, we demonstrate that activated hydrogen species generated on the Pt sites within the micropores can be readily transported by these oxygenate molecules to Fe sites located in macropores, leading to significantly accelerated hydrodeoxygenation rates on the latter sites. This finding provides a molecule-assisted approach to the rational design and optimization of multifunctional heterogeneous catalysts, reminiscent of the role of molecular coenzymes in bio-catalysis.

Spontaneous migration of H-atoms from metal particles to a nonreducible oxide support is generally limited by thermodynamics. Here, small oxygenate molecules are found to act as effective H-carriers to promote this process and lead to much improved hydrodeoxygenation rates on Pt-Fe/SiO₂ catalysts.

Dilute Alloys Based on Au, Ag, or Cu for Efficient Catalysis: From Synthesis to Active Sites

The development of new catalyst materials for energy-efficient chemical synthesis is critical as over 80% of industrial processes rely on catalysts, with many of the most energy-intensive processes specifically using heterogeneous catalysis. Catalytic performance is a complex interplay of phenomena involving temperature, pressure, gas composition, surface composition, and structure over multiple length and time scales. In response to this complexity, the integrated approach to heterogeneous dilute alloy catalysis reviewed here brings together materials synthesis, mechanistic surface chemistry, reaction kinetics, in situ and operando characterization, and theoretical calculations in a coordinated effort to develop design principles to predict and improve catalytic selectivity. Dilute alloy catalysts─in which isolated atoms or small ensembles of the minority metal on the host metal lead to enhanced reactivity while retaining selectivity─are particularly promising as selective catalysts. Several dilute alloy materials using Au, Ag, and Cu as the majority host element, including more recently introduced support-free nanoporous metals and oxide-supported nanoparticle "raspberry colloid templated (RCT)" materials, are reviewed for selective oxidation and hydrogenation reactions. Progress in understanding how such dilute alloy catalysts can be used to enhance selectivity of key synthetic reactions is reviewed, including quantitative scaling from model studies to catalytic conditions. The dynamic evolution of catalyst structure and composition studied in surface science and catalytic conditions and their relationship to catalytic function are also discussed, followed by advanced characterization and theoretical modeling that have been developed to determine the distribution of minority metal atoms at or near the surface. The integrated approach demonstrates the success of bridging the divide between fundamental knowledge and design of catalytic processes in complex catalytic systems, which can accelerate the development of new and efficient catalytic processes.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Mechanisms of Methylenecyclobutane Hydrogenation over Supported Metal Catalysts Studied by Parahydrogen-Induced Polarization Technique

In this work the mechanism of methylenecyclobutane hydrogenation over titania-supported Rh, Pt and Pd catalysts was investigated using parahydrogen-induced polarization (PHIP) technique. It was found that methylenecyclobutane hydrogenation leads to formation of a mixture of reaction products including cyclic (1-methylcyclobutene, methylcyclobutane), linear (1-pentene, cis-2-pentene, trans-2-pentene, pentane) and branched (isoprene, 2-methyl-1-butene, 2-methyl-2-butene, isopentane) compounds. Generally, at lower temperatures (150-350 °C) the major reaction product was methylcyclobutane while higher temperature of 450 °C favors formation of branched products isoprene, 2-methyl-1-butene and 2-methyl-2-butene. PHIP effects were detected for all reaction products except methylenecyclobutane isomers 1-methylcyclobutene and isoprene implying that the corresponding compounds can incorporate two atoms from the same parahydrogen molecule in a pairwise manner in the course of the reaction in particular positions. The mechanisms were proposed for the formation of these reaction products based on PHIP results.

Model Catalysis with HOPG-Supported Pd Nanoparticles and Pd Foil: XPS, STM and C2H4 Hydrogenation

A surface science based approach was applied to model carbon supported Pd nanoparticle catalysts. Employing physical vapour deposition of Pd on sputtered surfaces of highly oriented pyrolytic graphite (HOPG), model catalysts were prepared that are well-suited for characterization by X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Analysis of the HOPG substrate before and after ion-bombardment, and of Pd/HOPG before and after annealing, revealed the number of “nominal” HOPG defects (~ 10¹⁴ cm⁻²) as well as the nucleation density (~ 10¹² cm⁻²) and structural characteristics of the Pd nanoparticles (mean size/height/distribution). Two model systems were stabilized by UHV annealing to 300 °C, with mean Pd particles sizes of 4.3 and 6.8 nm and size/height aspect ratio up to ~ 10. A UHV-compatible flow microreactor and gas chromatography were used to determine the catalytic performance of Pd/HOPG in ethylene (C₂H₄) hydrogenation up to 150 °C under atmospheric pressure, yielding temperature-dependent conversion values, turnover frequencies (TOFs) and activation energies. The performance of Pd nanocatalysts is compared to that of polycrystalline Pd foil and contrasted to Pt/HOPG and Pt foil, pointing to a beneficial effect of the metal/carbon phase boundary, reflected by up to 10 kJ mol⁻¹ lower activation energies for supported nanoparticles.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Improving Reproducibility in Hydrogen Storage Material Research

Research into new reversible hydrogen storage materials has the potential to help accelerate the transition to a hydrogen economy. The discovery of an efficient and cost-effective method of safely storing hydrogen would revolutionise its use as a sustainable energy carrier. Accurately measuring storage capacities - particularly of novel nanomaterials - has however proved challenging, and progress is being hindered by ongoing problems with reproducibility. Various metal and complex hydrides are being investigated, together with nanoporous adsorbents such as carbons, metal-organic frameworks and microporous organic polymers. The hydrogen storage properties of these materials are commonly determined using either the manometric (or Sieverts) technique or gravimetric methods, but both approaches are prone to significant error, if not performed with great care. Although commercial manometric and gravimetric instruments are widely available, they must be operated with an awareness of the limits of their applicability and the error sources inherent to the measurement techniques. This article therefore describes the measurement of hydrogen sorption and covers the required experimental procedures, aspects of troubleshooting and recommended reporting guidelines, with a view of helping improve reproducibility in experimental hydrogen storage material research.

Competing Reaction Pathways in Heterogeneously Catalyzed Hydrogenation of Allyl Cyanide: The Chemical Nature of Surface Species

We present a mechanistic study on the formation of an active ligand layer over Pd(111), turning the catalytic surface highly active and selective in partial hydrogenation of an α,β‐unsaturated aldehyde acrolein. Specifically, we investigate the chemical composition of a ligand layer consisting of allyl cyanide deposited on Pd(111) and its dynamic changes under the hydrogenation conditions. On pristine surface, allyl cyanide largely retains its chemical structure and forms a layer of molecular species with the CN bond oriented nearly parallel to the underlying metal. In the presence of hydrogen, the chemical composition of allyl cyanide strongly changes. At 100 K, allyl cyanide transforms to unsaturated imine species, containing the C=C and C=N double bonds. At increasing temperatures, these species undergo two competing reaction pathways. First, the C=C bond become hydrogenated and the stable N‐butylimine species are produced. In the competing pathway, the unsaturated imine reacts with hydrogen to fully hydrogenate the imine group and produce butylamine. The latter species are unstable under the hydrogenation reaction conditions and desorb from the surface, while the N‐butylimine adsorbates formed in the first reaction pathway remain adsorbed and act as an active ligand layer in selective hydrogenation of acrolein.

Fabrication of defective graphene oxide for efficient hydrogen production and enhanced 4-nitro-phenol reduction

Hydrogen has been considered as one of the most promising alternative energy source to solve the future energy demands due to its high energy capacity and emission-free character. The generation of hydrogen from non-fossil sources is necessary for the sustainable development of human life on this planet. The hydrolysis of sodium borohydride can quickly produce a large amount of hydrogenin situand on-demand in the presence of the catalyst, which can be used as an alternative energy source. So, it is crucial to fabricate the highly efficient, robust, and economical catalyst for the production of hydrogen via hydrolysis of sodium borohydride. Herein, a facile and efficient approach for the synthesis of metal-functionalized reduced graphene oxide for the production of hydrogen at room temperature was used. Moreover, the synthesized catalyst has also been tested in the field of environmental catalysis for the reduction of toxic 4-nitrophenol to valuable 4-aminophenol in the presence of sodium borohydride. The enhanced activity of prepared metal-functionalized reduced graphene oxide is ascribed to a strong affinity between Fe-N_Xand reduced graphene oxide which facilitates electron transfer as well as synergistic effect. Overall, this work presents a crucial procedure for green chemistry reactions when a carbonaceous material is selected as a catalyst.

Prediction Descriptor for Catalytic Activity of Platinum Nanoparticles/Metal-Organic Framework Composites

Supported metal nanoparticles (MNPs) have exhibited superior catalytic performance in various heterogeneous catalysis applications, which is usually influenced or even determined by the physicochemical properties of their porous supports. It is well acknowledged that understanding the regulation mechanism of supports is an important prerequisite to predict the catalytic performance of supported MNPs as well as the development of advanced catalysts. Here, we demonstrated that different transition-metal clusters (from Group IIIB to Group IIB) within metal-organic frameworks (MOFs) could accurately regulate the surface electronic status of supported platinum nanoparticles (Pt NPs), and the Pt/MOF composites showed a periodic activity trend in hydrogenation of 1-hexene. A strong correlation was found between the catalytic activity of Pt/MOF composites and the number of electrons in their outmost d orbitals of the transition-metal species, suggesting that the latter could play the role of prediction descriptor. Furthermore, this descriptor can be extended to predict the hydrogenation activity of more Pt/MOF composites and provide an important guiding principle for the design of supported MNPs catalysts.

Hydroxyl improving the activity, selectivity and stability of supported Ni single atoms for selective semi-hydrogenation

Atomically dispersed metal catalysts with high atomic utilization and selectivity have been widely studied for acetylene semi-hydrogenation in excess ethylene among others. Further improvements of activity and selectivity, in addition to stability and loading, remain elusive due to competitive adsorption and desorption between reactants and products, hydrogen activation, partial hydrogenation etc. on limited site available. Herein, comprehensive density functional theory calculations have been used to explore the new strategy by introducing an appropriate ligand to stabilize the active single atom, improving the activity and selectivity on oxide supports. We find that the hydroxyl group can stabilize Ni single atoms significantly by forming Ni1(OH)2 complexes on anatase TiO2(101), whose unique electronic and geometric properties enable high performance in acetylene semi-hydrogenation. Specifically, Ni1(OH)2/TiO2(101) shows favorable acetylene adsorption and promotes the heterolytic dissociation of H2 achieving high catalytic activity, and it simultaneously weakens the ethylene bonding to facilitate subsequent desorption showing high ethylene selectivity. Hydroxyl stabilization of single metal atoms on oxide supports and promotion of the catalytic activity are sensitive to transition metal and the oxide supports. Compared to Co, Rh, Ir, Pd, Pt, Cu, Ag and Au, and anatase ZrO2, IrO2 and NbO2 surfaces, the optimum interactions between Ni, O and Ti and resulted high activity, selectivity and stability make Ni1(OH)2/TiO2(101) a promising catalyst in acetylene hydrogenation. Our work provides valuable guidelines for utilization of ligands in the rational design of stable and efficient atomically dispersed catalysts.

Dynamic Modification of Palladium Catalysts with Chain Alkylamines for the Selective Hydrogenation of Alkynes

Selective hydrogenation of alkynes plays a pivotal role in the field of chemical production but still suffers from restrained catalytic activity and low alkene selectivity. Herein, a dynamic modification strategy was utilized by preferentially attaching diethylenetriamine (DETA) to the surface of the support to modify the Pd catalyst. The DETA-modified Pd catalyst demonstrates unprecedented reactivity (14,412 h^-1) and selectivity as high as 94% for the semihydrogenation of 2-methyl-3-butyn-2-ol at 35 °C, presenting a 36-fold higher reactivity than the Lindlar catalyst. Moreover, the yield exceeds 98.2% at full conversion under no solvent and organic adsorbate conditions, indicating the potential applications for industrial production. Systematic studies reveal that flexible DETA serves in a reversible "breathing pattern" for the molecular discrimination by constructing dynamic metal-support interaction (DMSI), enabling selective exclusion of alkenes from the Pd surface. DETA is competent to dynamically adjust the adsorption behaviors of reactants and effectively boost the intrinsic activity of the modified catalyst. Impressively, the DETA-modified Pd catalyst exhibits exceptional stability even after being recycled 20 times. This work sheds light on a novel and applicable method for the rational design of heterogeneous catalysts via DMSI.

Convenient semihydrogenation of azoarenes to hydrazoarenes using H2

The high atom-economical and eco-benign nature of hydrogenation reactions make them much more superior to conventional reduction and transfer hydrogenation. Herein, a convenient and highly selective hydrogenation reaction of azoarenes using molecular hydrogen to access diverse hydrazoarenes is reported. The present catalytic method is general and operationally simple, and it operates under exceedingly mild conditions (room temperature and 1 atm of hydrogen pressure). The reusability of catalysts used in this method is also successfully demonstrated.

Germanium-regulated adsorption site preference on ruthenium electrocatalyst for efficient hydrogen evolution

A magnesiothermic reduction route has been presented to synthesize phase-pure germanides that are not readily available traditionally. The obtained ruthenium germanide (RuGe) serves as an efficient non-Pt electrocatalyst for hydrogen evolution, and its intrinsic activity is very close to that of Pt. Our combined theoretical and experimental study demonstrates that the remarkable performance is derived from the germanium-induced change in hydrogen site preference from hollow to efficient Ru top sites.

Single-Atom Catalysts: A Sustainable Pathway for the Advanced Catalytic Applications

A heterogeneous catalyst is a backbone of modern sustainable green industries; and understanding the relationship between its structure and properties is the key for its advancement. Recently, many upscaling synthesis strategies for the development of a variety of respectable control atomically precise heterogeneous catalysts are reported and explored for various important applications in catalysis for energy and environmental remediation. Precise atomic-scale control of catalysts has allowed to significantly increase activity, selectivity, and in some cases stability. This approach has proved to be relevant in various energy and environmental related technologies such as fuel cell, chemical reactors for organic synthesis, and environmental remediation. Therefore, this review aims to critically analyze the recent progress on single-atom catalysts (SACs) application in oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and chemical and/or electrochemical organic transformations. Finally, opportunities that may open up in the future are summarized, along with suggesting new applications for possible exploitation of SACs.

Adsorption of crotonaldehyde on metal surfaces: Cu vs Pt

The thermal chemistry of crotonaldehyde on the surface of a polished polycrystalline copper disk was characterized by temperature-programmed desorption (TPD) and reflection-absorption infrared spectroscopy (RAIRS) and contrasted with previous data obtained on a Pt(111) single crystal substrate. A clear difference in the adsorption mode was identified between the two surfaces, highlighted by the prevalence of RAIRS peaks for the C=C bond on Cu vs for C=O on Pt. Adsorption was also determined to be much weaker on Cu vs Pt, with an adsorption energy on the former ranging from -50 kJ/mol to -65 kJ/mol depending on the surface coverage. The experimental data were complemented by extensive quantum mechanics calculations using density functional theory (DFT) to determine the most stable adsorption configurations on both metals. It was established that crotonaldehyde adsorption on Cu occurs via the oxygen atom in the carbonyl group, in a mono-coordinated fashion, whereas on Pt multi-coordination is preferred, centered around the C=C bond. The contrasting surface adsorption modes seen on these two metals are discussed in terms of the possible relevance to selectivity in single-atom alloy hydrogenation catalysis.

Identification of hydrogen species on Pt/Al2O3 by in situ inelastic neutron scattering and their reactivity with ethylene

Active hydrogen species and their dynamics in ethylene hydrogenation reaction were elucidated by in situ INS and DFT calculations.

Regulating Pd/Al2O3 catalyst by g-C3N4 toward the enhanced selectivity of isoprene hydrogenation

The catalytic performance of Pd NPs in the selective hydrogenation of isoprene is modulated by g-C₃N₄ deposits on commercial alumina supports.

Selectivity of the Lindlar catalyst in alkyne semi-hydrogenation: a direct liquid-phase adsorption study

Pd catalysts contain active sites that strongly adsorb alkyne and alkene molecules. The presence of the latter, alkene sites, defines the low semi-hydrogenation selectivity.

Hydrogenation on Palladium Nanoparticles Supported by Graphene Nanoplatelets

Pd nanoparticles (1 wt %; mean size ∼4 nm) were supported on ∼2 μm sized, but few nanometers thick, graphene nanoplatelets (GNPs) and compared to 1 wt % Pd on activated carbon or γ-alumina. Catalyst morphology, specific surface area, and Pd particle size were characterized by SEM, BET, and TEM, respectively. H2-TPD indicated that GNPs intercalated hydrogen, which may provide additional H2 supply to the Pd nanoparticles during C2H4 hydrogenation. Whereas the two types of Pd/GNPs (NaOH vs calcinated) catalysts were less active than Pd/C and Pd/Al2O3 below 40 °C, at 55 °C they were about 3-4 times more active. As for example Pd/GNPs (NaOH) and Pd/Al2O3 exhibited not too different mean Pd particle size (3.7 vs 2.5 nm, respectively), the higher activity is attributed to the additional hydrogen supply likely by the metal/support interface, as suggested by the varying C2H4 and H2 orders on the different supports. Operando XANES measurements during C2H4 hydrogenation revealed the presence of Pd hydride. The Pd hydride was more stable for Pd/GNPs (NaOH) than for Pd/C, once more pointing to a better hydrogen supply by graphene nanoplatelets.

Hydrogenative Metathesis of Enynes via Piano-Stool Ruthenium Carbene Complexes Formed by Alkyne gem-Hydrogenation

The only recently discovered gem-hydrogenation of internal alkynes is a fundamentally new transformation, in which both H atoms of dihydrogen are transferred to the same C atom of a triple bond while the other position transforms into a discrete metal carbene complex. [Cp*RuCl]₄ is presently the catalyst of choice: the resulting piano-stool ruthenium carbenes can engage a tethered alkene into either cyclopropanation or metathesis, and a prototypical example of such a reactive intermediate with an olefin ligated to the ruthenium center has been isolated and characterized by X-ray diffraction. It is the substitution pattern of the olefin that determines whether metathesis or cyclopropanation takes place: a systematic survey using alkenes of largely different character in combination with a computational study of the mechanism at the local coupled cluster level of theory allowed the preparative results to be sorted and an intuitive model with predictive power to be proposed. This model links the course of the reaction to the polarization of the double bond as well as to the stability of the secondary carbene complex formed, if metathesis were to take place. The first application of “hydrogenative metathesis” to the total synthesis of sinularones E and F concurred with this interpretation and allowed the proposed structure of these marine natural products to be confirmed. During this synthesis, it was found that gem-hydrogenation also provides opportunities for C–H functionalization. Moreover, silylated alkynes are shown to participate well in hydrogenative metathesis, which opens a new entry into valuable allylsilane building blocks. Crystallographic evidence suggests that the polarized [Ru–Cl] bond of the catalyst interacts with the neighboring R₃Si group. Since attractive interligand Cl/R₃Si contacts had already previously been invoked to explain the outcome of various ruthenium-catalyzed reactions, including trans-hydrosilylation, the experimental confirmation provided herein has implications beyond the present case.