PtPd(111) Surface versus PtAu(111) Surface: Which One Is More Active for Methanol Oxidation?

High-Energy Facet Engineering for Electrocatalytic Applications

The design of high-energy facets in electrocatalysts has attracted significant attention due to their potential to enhance electrocatalytic activity. In this review, the significance of high-energy facets in various electrochemical reactions are highlighted, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CRR). Their importance in various electrochemical reactions and present strategies for constructing high-energy facets are discussed, including alloying, heterostructure formation, selective etching, capping agents, and coupling with substrates. These strategies enable control over crystallographic orientation and surface morphology, fine-tuning electrocatalytic properties. This study also addresses future directions and challenges, emphasizing the need to better understand fundamental mechanisms. Overall, high-energy facets offer exciting opportunities for advancing electrocatalysis.

Optimizing Intermediate Adsorption on Pt Sites via Triple-Phase Interface Electronic Exchange for Methanol Oxidation

For the most commonly applied platinum-based catalysts of direct methanol fuel cells, the adsorption ability toward reaction intermediates, including CO and OH, plays a vital role in their catalytic activity and antipoisoning in anodic methanol oxidation reaction (MOR). Herein, guided by a theoretical mechanism study, a favorable modulation of the electronic structure and intermediate adsorption energetics for Pt active sites is achieved by constructing the triple-phase interfacial structure between tin oxide (SnO2), platinum (Pt), and nitrogen-doped graphene (NG). From the strong electronic exchange at the triple-phase interface, the adsorption ability toward MOR reaction intermediates on Pt sites could be efficiently optimized, which not only inhibits the adsorption of CO* on active sites but also facilitates the adsorption of OH* to strip the poisoning species from the catalyst surface. Accordingly, the resulting catalyst delivers excellent catalytic activity and antipoisoning ability for MOR catalysis. The mass activity reaches 1098 mA mg-1Pt, 3.23 times of commercial Pt/C. Meanwhile, the initial potentials and main peak for CO oxidation are also located at a much lower potential (0.51 and 0.74 V) against commercial Pt/C (0.83 and 0.89 V).

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

Resolving Atomic-Scale Structure and Chemical Coordination in High-Entropy Alloy Electrocatalysts for Structure-Function Relationship Elucidation

The recent breakthrough in confining five or more atomic species in nanocatalysts, referred to as high-entropy alloy nanocatalysts (HEAs), has revealed the possibilities of multielemental interactions that can surpass the limitations of binary and ternary electrocatalysts. The wide range of potential surface configurations in HEAs, however, presents a significant challenge in resolving active structural motifs, preventing the establishment of structure-function relationships for rational catalyst design and optimization. We present a methodology for creating sub-5 nm HEAs using an aqueous-based peptide-directed route. Using a combination of pair distribution function and X-ray absorption spectroscopy, HEA structure models are constructed from reverse Monte Carlo modeling of experimental data sets and showcase a clear peptide-induced influence on atomic-structure and chemical miscibility. Coordination analysis of our structure models facilitated the construction of structure-function correlations applied to electrochemical methanol oxidation reactions, revealing the complex interplay between multiple metals that leads to improved catalytic properties. Our results showcase a viable strategy for elucidating structure-function relationships in HEAs, prospectively providing a pathway for future materials design.

Highly Selective Wearable Alcohol Homologue Sensors Derived from Pt-Coated Truncated Octahedron Au

Unhealthy alcohol inhalation is among the top 10 causes of preventable death. However, the present alcohol sensors show poor selectivity among alcohol homologues. Herein, Pt-coated truncated octahedron Au (Pt_m@Au_to) as the electrocatalyst for a highly selective electrochemical sensor toward alcohol homologues has been designed. The alcohol sensor is realized by distinguishing the electro-oxidation behavior of methanol (MeOH), ethanol (EtOH), or isopropanol (2-propanol). Intermediates from alcohols are further oxidized to CO₂ by Pt_m@Au_to, resulting in different oxidation peaks in cyclic voltammograms and successful distinction of alcohols. Pt_m@Au_to is then modified on wearable glove-based sensors for monitoring actual alcohol samples (MeOH fuel, vodka, and 2-propanol hand sanitizer), with good mechanical performance and repeatability. The exploration of the Pt_m@Au_to-based wearable alcohol sensor is expected to be suitable for environmental measurement with high selectivity for alcohol homologues or volatile organic compounds.

Low-temperature N-anchored ordered Pt3Co intermetallic nanoparticles as electrocatalysts for methanol oxidation reaction

To enhance nanocatalyst performance and durability for the methanol oxidation reaction (MOR) in a direct methanol fuel cell, small-sized (2.1 nm) and structurally ordered Pt₃Co intermetallic nanoparticles are uniformly anchored onto nitrogen-doped carbon nanotubes (N-CNTs) via a low-temperature N-anchoring method, and the N-doping abilities of different N-containing reagents are compared. After investigating the microstructure of Pt₃Co/N-CNTs and evaluating their catalytic activity for the MOR, the results show that N-doping facilitates the uniform loading of Pt₃Co NPs and plays a crucial role in improving the electrocatalytic activity of Pt₃Co NPs supported on CNTs. Pt₃Co/N-CNT-M with melamine as the N dopant exhibits the highest MOR activity and stability among all N-CNT-supported Pt₃Co NPs and Pt/N-CNT-M. Density functional theory calculations suggest that the doping of N enhances the binding energy of CNTs to Pt₃Co NPs, and the MOR mechanism shows that the introduction of Co is the reason for the enhancement of MOR reaction kinetics. The excellent electrochemical performance of Pt₃Co/N-CNT-M is mainly attributed to the synergistic effect of N and Pt₃Co intermetallic nanoparticles. The combination of ordered alloy nanoparticles and high-performance carrier N-CNT-M described herein exhibits great potential for fuel cells and may provide an unequivocal direction for the optimization of catalyst performance.

DFT Study on Methanol Oxidation Reaction Catalyzed by PtmPdn Alloys

Pt is widely used as the catalyst for methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFC). However, the high cost and limited supply of pure Pt limit the commercialization of DMFC. Herein, MOR catalyzed by variously designed Pd-doped PtmPdn was studied with the density functional theory (DFT); the PtmPdn(111) surface was chosen since it is the most stable surface among various low-index surfaces. The hydrogens in methyl groups were priorly dehydrogenated on Pt(111), followed by hydrogen in the hydroxyl group. The effects of both the ratio of Pt:Pd and the type of the alloy on the activity of PtmPdn catalysts toward MOR were also studied; both ordered and disordered PtPd with the 1:1 ratio had better catalytic activity towards MOR than other catalysts. Specifically, the disordered Pt:Pdd with the Pt:Pd ratio of 1:1 had the best activity for the relatively stronger adsorption of COH, but the lowest binding with CO and a moderate d band center. The adsorptions of both COH and CO are key steps in the MOR, since the steps of CH3OH→CH2OH→CHOH→COH have downhill energy profiles, while COH→CO is an uphill reaction. In addition, the d band centers of the surface atoms move towards the Fermi level with the increase of the Pd content; the d band can also be tuned by changing the atom arrangement. These findings can be used as rules to design high-performance catalysts for MOR.

Recent advances in phosphorus containing noble metal electrocatalysts for direct liquid fuel cells

Direct liquid fuel cells (DLFCs) are considered as satisfactory alternatives to traditional fossil fuels owing to their unique advantages, e.g. environmental friendliness and easy storage. Noble metal catalysts are widely used to improve the efficiency of DLFCs. However, the high cost, low utilization and poor stability of noble metals restricted their practical applications. Therefore, it is of great significance to explore cost-effective electrocatalysts and further improve their electrocatalytic performance. Reducing the content of noble metals by adding low-priced phosphorus (P) has been considered as an effective strategy, which is able to enhance their electrocatalytic activity and anti-poisoning ability through effectively changing the electronic density of active sites. In the past few years, tremendous P containing catalysts have been synthesized and utilized in DLFCs. In this review, we summarize the fundamentals of electrochemical reactions and present recent progress in P containing noble metal catalysts for DLFCs, including the discussion of their shape, composition and the relationship between P and active sites. Finally, the challenges and some potential directions in this field are pointed out.

Ultrasonically Surface-Activated Nickel Foam as a Highly Efficient Monolith Electrode for the Catalytic Oxidation of Methanol to Formate

Most of the current electrocatalysts for the methanol oxidation reaction are precious group metals such as Pt, Pd, and Ru. However, their use is limited due to their high cost, scarcity, and issues with carbon monoxide poisoning. We developed a simple method to prepare a nickel foam (NF)-based monolith electrode with a NiO nanosheet array structure as an efficient electrocatalyst toward the oxidation of methanol to produce formate. By a simple ultrasonic acid treatment and air oxidation at room temperature, an inert NF was converted to NiO/NF as a catalytically active electrode due to the uniform NiO nanosheet array that was rapidly formed on the surface of NiO/NF. In alkaline electrolytes containing methanol, the as-prepared NiO/NF catalysts exhibited a lower methanol oxidation reaction (MOR) potential of +1.53 V vs RHE at 100 mA cm^-2 compared to that of inert NF samples. The difference in potentials between the E_MOR and the E_OER at that current density was found to be 280 mV, indicating that methanol oxidation occurred at lower potentials as compared to the oxygen evolution reaction (OER). We also observed that the NiO/NF could also efficiently catalyze the oxidation of CO without being poisoned by it. NiO/NF retained close to 100% of its initial activity after 20,000 s of methanol oxidation tests at high current densities above 200 mA cm^-2. Because of the simple synthesis method and the enhanced catalytic performance and stability of NiO/NF, this allows methanol to be used as an OER masking agent for the energy-efficient generation of value-added products such as formic acid and hydrogen.

PtSn Nanoalloy Thin Films as Anode Catalysts in Methanol Fuel Cells

Reactions of SnX₂ (X = Cl, Br) with [PtMe₂(bipy)], 1, (bipy = 2,2'-bipyridine), followed by NaBH₄ reduction at the toluene/water interface in the presence or absence of graphene oxide support rendered PtSn nanoalloy thin films. They were characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The electrocatalytical activity of the PtSn thin films was investigated in the methanol oxidation reaction. Our studies showed that the PtSn/reduced-graphene oxide (RGO) thin film gave better catalytic results for MOR in comparison to bare PtSn or Pt thin films. A maximum j_f/j_b ratio (j_f and j_b are the maximum current densities in the forward and backward scans, respectively) of 6.77 was obtained for the PtSn/RGO thin film deriving from the 1 + SnBr₂ + NaBH₄ sequence.

Direct Synthesis of Ultrathin Pt Nanowire Arrays as Catalysts for Methanol Oxidation

High-performance electrocatalysts are of critical importance for fuel cells. Morphological modulation of the catalyst materials is a rare but feasible strategy to improve their performance. In this work, Pt nanowire arrays are directly synthesized with a template-less wet chemical method. The effects of surface functionalization and the reduction kinetics are revealed to be vital to the nanowire growth. The growth mechanism of the Pt nanowires is studied. By adjusting the concentration of the organic ligands, Pt nanowire arrays with tunable surface roughness can be obtained on various substrate surfaces. Such arrays avoid the contact resistance of randomly packed particles and allow open diffusion channels for reactants and products alike, making them excellent electrocatalysts for the methanol oxidation reaction. In particular, Pt nanowire arrays with rough surface have a mass activity of 1.24 A mg_Pt ^-1 at 1.12 V (vs Ag/AgCl), 3.18-fold higher than that of the commercial Pt/C catalysts. It also shows more resistant against poisoning, as indicated by the higher I_f /I_b ratio (2.06), in comparison to the Pt/C catalysts (1.30).

Hematite/M (M = Au, Pd) Catalysts Derived from a Double-Hollow Prussian Blue Microstructure: Simultaneous Catalytic Reduction of o- and p-Nitrophenols

Present study deals with hematite/M (M = Au, Pd) catalysts converted from a double-hollow Prussian blue microstructure (DHPM). The unique Prussian blue (PB) microstructure (MS) is prepared by a template-free solvothermal synthetic route in a single-step reaction. An amine-functionalized silicate sol-gel matrix (SSG) has served as the structure-directing agent cum stabilizer for making DHPM. Synthesized DHPM is having a unique structure: a hollow core and an in situ etched porous surface. Growth mechanism is explored and revealed by analyzing several experimental parameters such as HCl concentration, Fe source, effect of the added EtOH, silane concentration, and role of silanes' amine groups. It is identified that the superstructure consisted of well-aligned PB cubes growing radially from the core of the superstructure. Metal (Au and Pd) nanoparticles (NPs) are deposited on both interior and exterior of the PB MS through galvanic displacement reaction, and thus metal NP-loaded hematite phase iron oxide (α-Fe₂O₃) nanomaterials were derived by annealing them in air. Catalytic activities of the hematite/M(M = Au, Pd) MS are investigated toward simultaneous catalytic reduction of o-nitrophenol and p-nitrophenol. The resultant hematite/Pd MS showed high structural stability and catalytic active sites than the hematite/Au MS, which enhances the catalytic properties for the simultaneous catalytic reduction of both nitrophenols.

Unusual Effect of Trace Water on the Structure and Activity of Nix Co1-x Electrocatalysts for the Methanol Oxidation Reaction

Highly active Ni-based catalysts have attracted much attention but are still facing challenges owing to the immature synthetic method. Herein, polyhedral Ni_x Co_1-x alloy was prepared by a facile modified polyol method in which a trace amount of water could halve the particle size of the alloy. The Ni/Co ratios in Ni_x Co_1-x alloy strictly depended on the used amount of water owing to the different solubilities of the precursors. Among them, the Ni_0.6 Co_0.4 nanoparticles obtained with 70 μL of deionized water exhibited the best performance in the methanol oxidation reaction with a peak current density of 116 mA cm^-2 in the presence of 1 m NaOH+0.5 m CH₃ OH solution, which is higher than those of Ni_0.7 Co_0.3 (80 mA cm^-2 ) and Ni_0.5 Co_0.5 (33 mA cm^-2 ). The excellent performance of Ni_0.6 Co_0.4 is attributed to the unique structure with appropriate Ni/Co ratio, which elongates the C-O bond in methanol and lowers the reaction free energy according to DFT calculations.

Synthesis of Au@Pt Core-Shell Nanoparticles as Efficient Electrocatalyst for Methanol Electro-Oxidation

Bimetallic Au@Pt nanoparticles (NPs) with Pt monolayer shell are of much interest for applications in heterogeneous catalysts because of enhanced catalytic activity and very low Pt-utilization. However, precisely controlled synthesis with uniform Pt-monolayers and stability on the AuNPs seeds remain elusive. Herein, we report the controlled deposition of Pt-monolayer onto uniform AuNPs seeds to obtain Au@Pt core–shell NPs and their Pt-coverage dependent electrocatalytic activity for methanol electro-oxidation. The atomic ratio between Au/Pt was effectively tuned by varying the precursor solution ratio in the reaction solution. The morphology and atomic structure of the Au@Pt NPs were analyzed by high-resolution scanning transmission electron microcopy (HR-STEM) and X-ray diffraction (XRD) techniques. The results demonstrated that the Au@Pt core–shell NPs with Pt-shell thickness (atomic ratio 1:2) exhibit higher electrocatalytic activity for methanol electro-oxidation reaction, whereas higher and lower Pt ratios showed less overall catalytic performance. Such higher catalytic performance of Au@Pt NPs (1:2) can be attributed to the weakened CO binding on the Pt/monolayers surface. Our present synthesis strategy and optimization of the catalytic activity of Au@Pt core–shell NPs catalysts provide promising approach to rationally design highly active catalysts with less Pt-usage for high performance electrocatalysts for applications in fuel cells.

Carbon-Coated and Interfacial-Functionalized Mixed-Phase Mox Ti1-x O2-δ Nanotubes as Highly Active and Durable PtRu Catalyst Support for Methanol Electrooxidation

A synchronous carbon-coating and interfacial-functionalizing approach is proposed for the fabrication of Mo-doped Mo_x Ti_1-x O_2-δ nanotubes (C@IF-MTNTs) under mild hydrothermal reaction with subsequent annealing as advanced catalyst supports for PtRu nanoparticles (NPs) towards methanol electrooxidation. The carbonation of glucose and Mo-doping takes place simultaneously at the interface of pristine anatase TiO₂ nanotubes (TNTs), generating a unique concentric multilayered one-dimensional (1D) structure with crystalline an anatase/rutile mixed-phase TiO₂ core and Mo-functionalized interface and subsequently a carbon shell. The obtained PtRu/C@IF-MTNTs catalyst exhibits an over 2 times higher mass activity with comparable durability than that of the unmodified PtRu/C@TNTs catalyst and over 1.7 times higher mass activity with over 20 % higher stability than that of PtRu/C catalyst. Such superior catalytic performance towards methanol electrooxidation is ascribed to the Mo-functionalized interface, concentric multilayered 1D architecture, and anatase/rutile mixed-phase core, which facilitates the charge transport through 1D structural support and electronic interaction between C@IF-MTNTs and ultrafine PtRu NPs. This work reveals the critical application of a 1D interfacial functionalized architecture for advanced energy storage and conversion.