NiSx Quantum Dots Accelerate Electron Transfer in Cd0.8Zn0.2S Photocatalytic System via an rGO Nanosheet “Bridge” toward Visible-Light-Driven Hydrogen Evolution

Evidence for an Interface of Hybrid Cocatalysts Favoring Photocatalytic Hydrogen Evolution Kinetics

Hybrid cocatalysts have great application potential for improving the photocatalytic hydrogen evolution performance of semiconductors. The interfaces between components of hybrid cocatalysts make a great contribution to the improvement, but the associated mechanisms remain unclear. Herein, we prepared and tested three comparative CdS-based photocatalysts with NiS, NiS/Ni9S8, and Ni9S8 as the cocatalysts separately. The emphasis is placed on investigating the effect of the NiS/Ni9S8 interfaces on the photocatalytic hydrogen evolution performance of CdS. NiS/Ni9S8 exhibits a higher ability than NiS and Ni9S8 in making CdS a more active photocatalyst for water splitting. It shows that NiS, NiS/Ni9S8, and Ni9S8 perform similarly in terms of promoting the charge transfer and separation of CdS based on steady-state and time-resolved photoluminescence studies. At the same time, the linear sweep voltammetry and electrochemical impedance spectroscopy tests combined with the density functional theory calculations reveal that the component interfaces of NiS/Ni9S8 enable us to lower the water splitting activation energy, the charge-transfer resistance from the cocatalyst to sacrificial agent, and hydrogen adsorption Gibbs free energy. It is evidenced from this work that component interfaces of hybrid cocatalysts play a vital role in accelerating the dynamics of hydrogen evolution reactions.

An electron-hole rich dual-site nickel catalyst for efficient photocatalytic overall water splitting

Photocatalysis offers an attractive strategy to upgrade H₂O to renewable fuel H₂. However, current photocatalytic hydrogen production technology often relies on additional sacrificial agents and noble metal cocatalysts, and there are limited photocatalysts possessing overall water splitting performance on their own. Here, we successfully construct an efficient catalytic system to realize overall water splitting, where hole-rich nickel phosphides (Ni₂P) with polymeric carbon-oxygen semiconductor (PCOS) is the site for oxygen generation and electron-rich Ni₂P with nickel sulfide (NiS) serves as the other site for producing H₂. The electron-hole rich Ni₂P based photocatalyst exhibits fast kinetics and a low thermodynamic energy barrier for overall water splitting with stoichiometric 2:1 hydrogen to oxygen ratio (150.7 μmol h^-1 H₂ and 70.2 μmol h^-1 O₂ produced per 100 mg photocatalyst) in a neutral solution. Density functional theory calculations show that the co-loading in Ni₂P and its hybridization with PCOS or NiS can effectively regulate the electronic structures of the surface active sites, alter the reaction pathway, reduce the reaction energy barrier, boost the overall water splitting activity. In comparison with reported literatures, such photocatalyst represents the excellent performance among all reported transition-metal oxides and/or transition-metal sulfides and is even superior to noble metal catalyst.

Cerium-based metal sulfide derived nanocomposite-embedded rGO as an efficient catalyst for photocatalytic application

Reduced graphene oxide (rGO) with metal sulfides is an efficient photocatalyst for treating textile effluent. Herein, a hydrothermal technique was used to synthesize transition metal sulfide with rGO nanocomposite. Under 120 min of sunlight exposure, the cerium-nickel sulfide/rGO nanocomposite (Ce₂S₃-NiS₂/rGO) photodegraded the methyl orange (MO) dye with an efficiency of 89.1% which is significantly higher than that of bare nickel sulfide (NiS₂) and cerium sulfide (Ce₂S₃) photocatalysts. Moreover, another model pollutant dye bromophenol blue (BP) was treated under the same experimental condition, and it has achieved about 84.2% degradation efficiency. The combination of NiS₂ and Ce₂S₃ improves the separation efficiency of photogenerated carriers, resulting in improved photocatalytic activity. In addition, ternary metal sulfide with rGO increases pollutant adsorption and electron-hole photogenerated pairs. Therefore, the mechanism of photocatalytic Ce₂S₃-NiS₂/rGO is investigated in detail. This research could pave the way for the development of capable and adaptable Ce₂S₃-NiS₂/rGO photocatalysts for environmental remediation.

Nanoscale hetero-interfaces for electrocatalytic and photocatalytic water splitting

As green and sustainable methods to produce hydrogen energy, photocatalytic and electrochemical water splitting have been widely studied. In order to find efficient photocatalysts and electrocatalysts, materials with various composition, size, and surface/interface are investigated. In recent years, constructing suitable nanoscale hetero-interfaces can not only overcome the disadvantages of the single-phase material, but also possibly provide new functionalities. In this review, we systematically introduce the fundamental understanding and experimental progress in nanoscale hetero-interface engineering to design and fabricate photocatalytic and electrocatalytic materials for water splitting. The basic principles of photo-/electro-catalytic water splitting and the fundamentals of nanoscale hetero-interfaces are briefly introduced. The intrinsic behaviors of nanoscale hetero-interfaces on electrocatalysts and photocatalysts are summarized, which are the electronic structure modulation, space charge separation, charge/electron/mass transfer, support effect, defect effect, and synergistic effect. By highlighting the main characteristics of hetero-interfaces, the main roles of hetero-interfaces for electrocatalytic and photocatalytic water splitting are discussed, including excellent electronic structure, efficient charge separation, lower reaction energy barriers, faster charge/electron/mass transfer, more active sites, higher conductivity, and higher stability on hetero-interfaces. Following above analysis, the developments of electrocatalysts and photocatalysts with hetero-structures are systematically reviewed.

PtS quantum dots/Nb2O5 nanosheets with accelerated charge transfer for boosting photocatalytic H2 production

The rapid recombination rate of charges limits the improvement of photocatalytic hydrogen evolution performance related to semiconductor photocatalysts. An effective strategy to accelerate charge separation and transfer is the design and construction of new high-efficiency cocatalysts on photocatalysts. Herein, a system of PtS quantum dots/Nb₂O₅ nanosheets (PtS/Nb₂O₅) was constructed via the in situ vapor phase (ISVP) synthesis process. The conclusions from ultrafast femtosecond-resolved TA spectroscopy indicated that the lifetime of the photogenerated charges of PtS/Nb₂O₅ (6073.75 ps) was shortened markedly in contrast to that of Nb₂O₅ (6634.05 ps), manifesting the facilitated separation and transfer of photogenerated charges caused by the quantum-dot-structured PtS cocatalyst. The enhanced charge separation and transfer capacity contributes to an excellent H₂ production rate of 182.5 μmol h^-1 for PtS/Nb₂O₅, which is up to 3.4 and 12.2 times that of Pt/Nb₂O₅ and Nb₂O₅, respectively. This work brings up new avenues for constructing unique and effective photocatalysts via the cocatalyst design.

Recent advances in solution assisted synthesis of transition metal chalcogenides for photo-electrocatalytic hydrogen evolution

Hydrogen evolution from water splitting is considered to be an important renewable clean energy source and alternative to fossil fuels for future energy sustainability. Photocatalytic and electrocatalytic water splitting is considered to be an effective method for the sustainable production of clean energy, H₂. This perspective especially emphasizes research advances in the solution-assisted synthesis of transition metal chalcogenides for both photo and electrocatalytic hydrogen evolution applications. Transition metal chalcogenides (CdS, MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂, and WSe₂) have received intensified research interest over the past two decades on account of their unique properties and great potential across a wide range of applications. The photocatalytic activity of transition metal chalcogenides can further be improved by elemental doping, heterojunction formation with noble metals (Au, Pt, etc.), non-chalcogenides (MoS₂, In₂S₃, NiS_1-X), morphological tuning, through various solution-assisted synthesis processes, including liquid-phase exfoliation, heat-up, hot-injection methods, hydrothermal/solvothermal routes and template-mediated synthesis processes. In this review we will discuss recent developments in transition metal chalcogenides (TMCs), the role of TMCs for hydrogen production and various strategies for surface functionalization to increase their activity, different synthesis methods, and prospects of TMCs for hydrogen evolution. We have included a brief discussion on the effect of surface hydrogen binding energy and Gibbs free energy change for HER in electrocatalytic hydrogen evolution.

Efficient Adsorption-Photocatalytic Removal of Tetracycline Hydrochloride over Octahedral MnS

To disclose the effect of crystal plane on the adsorption-photocatalytic activity of MnS, octahedral MnS was prepared via the hydrothermal route to enhance the adsorption and photocatalytic efficiencies of tetracycline hydrochloride (TCH) in visible light region. The optimal MnS treated at 433 K for 16 h could remove 94.83% TCH solution of 260 mg L⁻¹ within 180 min, and its adsorption-photocatalytic efficiency declined to 89.68% after five cycles. Its excellent adsorption-photocatalytic activity and durability were ascribed to the sufficient vacant sites of octahedral structure for TCH adsorption and the feasible band-gap structure for visible-light response. In addition, the band gap structure (1.37 eV) of MnS with a conduction band value of −0.58 eV and a valence band value of 0.79 eV was favorable for the generation of O²⁻, while unsuitable for the formation of OH. Hence, octahedral MnS was a potential material for the removal of antibiotics from wastewater.

Bridging Effect of S-C Bond for Boosting Electron Transfer over Cubic Hollow CoS/g-C3N4 Heterojunction toward Photocatalytic Hydrogen Production

The construction of interfacial effects and chemical bonds between catalysts is one of the effective strategies to facilitate photogenerated electron transfer. A novel hollow cubic CoS is derived from Co-ZIF-9 and the S-C bond is successfully constructed between CoS and g-C₃N₄. The S-C bond acts as a bridge for electronic transmission, allowing the rapid transmission of photoelectron to hydrogen evolution active site in CoS. In addition, the results of electrochemical impedance spectroscopy and time-resolved photoluminescence spectroscopy show that the S-C bond acts as a bridge to quickly transfer photogenerated carriers in the composite material, and achieves the effect of high-efficiency hydrogen evolution. The hydrogen production of SgZ-45 reaches 9545 μmol·g^-1 in 5 h, which is 53 and 12 times that of g-C₃N₄ and ZIF-9, respectively. The intrinsic mechanism of photoelectron transfer through S-C bonds can be further confirmed by density functional theory (DFT) calculations. This work provides new insights for building a chemical bond electron transfer bridge between MOF derivatives and nonmetallic photocatalytic materials.

Optimizing Atomic Hydrogen Desorption of Sulfur-Rich NiS1+ x Cocatalyst for Boosting Photocatalytic H2 Evolution

Low-cost transition-metal chalcogenides (MS_x ) are demonstrated to be potential candidate cocatalyst for photocatalytic H₂ generation. However, their H₂ -generation performance is limited by insufficient quantities of exposed sulfur (S) sites and their strong bonding with adsorbed hydrogen atoms (SH_ads ). To address these issues, an efficient coupling strategy of active-site-enriched regulation and electronic structure modification of active S sites is developed by rational design of core-shell Au@NiS_{1+ x} nanostructured cocatalyst. In this case, the Au@NiS_{1+ x} cocatalyst can be skillfully fabricated to synthesize the Au@NiS_{1+ x} modified TiO₂ (denoted as TiO₂ /Au@NiS_{1+ x} ) by a two-step route. Photocatalytic experiments exhibit that the resulting TiO₂ /Au@NiS_{1+ x} (1.7:1.3) displays a boosted H₂ -generation rate of 9616 µmol h^-1 g^-1 with an apparent quantum efficiency of 46.0%  at 365 nm, which is 2.9 and 1.7 times the rate over TiO₂ /NiS_{1+ x} and TiO₂ /Au, respectively. In situ/ex situ XPS characterization and density functional theory calculations reveal that the free-electrons of Au can transfer to sulfur-enriched NiS_{1+ x} to induce the generation of electron-enriched S^{δ -} active centers, which boosts the desorption of H_ads for rapid hydrogen formation via weakening the strong SH_ads bonds. Hence, an electron-enriched S^{δ -} -mediated mechanism is proposed. This work delivers a universal strategy for simultaneously increasing the active site number and optimizing the binding strength between the active sites and hydrogen adsorbates.

Photochemical synthesis of bimetallic CuNiSx quantum dots onto g-C3N4 as a cocatalyst for high hydrogen evolution

CuNiSx QDs were fabricated onto g-C3N4 by photochemical deposition method. The small size can expose more active S sites on the edge and the introduction of Cu2+ into NiSx can slightly modulate the electronic structure of Ni and S centers, thus weakening the S–Hads bonds.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

MoP@MoO3 S-scheme heterojunction in situ construction with phosphating MoO3 for high-efficient photocatalytic hydrogen production

As important artificial photosynthesis, the construction of core-shell heterojunction materials is considered to be one of the effective strategies for designing highly active photocatalysts. Here, the Step-scheme (S-scheme) heterojunction photocatalyst is firmly grown by in situ phosphating. The calcination method uses MoO₃ nanoparticles as the substrate, and the surface of MoO₃ is phosphatized and etched gradually from the outside to the inside using the phosphine gas. The introduced phosphorus atoms can replace MoO₃ oxygen atoms to form Mo-P bonds to generate molybdenum phosphide. The interface interaction dominated by chemical bonds has a stronger interface interaction force, which can promote the interface charge transfer leading to optimizing the MoP@MoO₃ core-shell composite material, adjusting the quality of sodium hypophosphite, and phosphating MoO₃ to varying degrees, producing the best hydrogen production H₂ evolution rate is 10 000.02 μmol h^-1 g^-1. Density functional theory (DFT) calculations and a series of experiments were used to determine the S-scheme charge transfer mechanism in MoP@MoO₃. This design provides a new idea for the introduction of surface-active sites and the construction of mixed anion photocatalysts. At the same time, a new design scheme is provided for the in situ construction of S-scheme interface heterojunction materials.

0D/3D coupling of g-C3N4 QDs/hierarchical macro-mesoporous CuO-SiO2 for high-efficiency norfloxacin removal in photo-Fenton-like processes

Photo-Fenton process is an advanced oxidation technology, which is used to eliminate organic pollutants in environmental pollution. In this paper, g-C₃N₄ quantum dots incorporated hierarchical macro-mesoporous CuO-SiO₂ (MM SC-QDs) composite was successfully fabricated by a dual-template method combined with polystyrene sphere (PS) crystal and copolymer F127. With the presence of H₂O₂, MM SC-QDs exhibited excellent degradation performance against the antibiotic pollutant norfloxacin (NOR) under visible-light assisted heterogeneous Fenton process at neutral condition, which was 27 times higher than that of the Bulk CuO-SiO₂. Interconnected macropores, together with abundant mesopores effectively expand specific surface area and improve mass transfer. In addition, the g-C₃N₄ QDs served as the separation center for photogenerated charges, promoting the separation and migration of the charge carriers. Wherein, the long-lived photogenerated electrons were effectively separated and transferred to the surface of CuO-SiO₂, which accelerated the reduction rate of Cu²⁺ to Cu⁺, enhancing the photo-Fenton-like catalytic activity. This stable, efficient, and environmentally friendly Cu-based heterogeneous photo-Fenton-like catalyst is expected to become an effective implementation in organic pollution removal. Meanwhile, this paper proves that Cu-based materials can activate H₂O₂ to generate singlet oxygen (¹O₂) for the degradation of organic pollutants. The transformation mechanism of ¹O₂ was clarified, which is helpful to better understand the Fenton-like reaction process of Cu-based materials.

A NiS co-catalyst decorated Zn3In2S6/g-C3N4 type-II ball-flower-like nanosphere heterojunction for efficient photocatalytic hydrogen production

Promoting the separation of photogenerated electron-hole pairs and enhancing the charge carrier transfer are critical in photocatalysis. In our work, a ball-flower-like NiS/Zn₃In₂S₆/g-C₃N₄ photocatalyst fabricated by a hydrothermal method exhibited superior performance for photocatalytic water splitting. The optimized 2.0% NiS/Zn₃In₂S₆/g-C₃N₄ rivaled noble metal based Pt/g-C₃N₄ and showed an apparent quantum efficiency (AQE) of 24.3% at 420 nm, with a H₂ yield of 4.135 mmol g^-1 h^-1, which was 30.4 and 9.51 times that of pure g-C₃N₄ and binary Zn₃In₂S₆/g-C₃N₄ composites, respectively. The experimental and characterization results suggested that the heterojunction formed between Zn₃In₂S₆/g-C₃N₄ and the decorating NiS co-catalyst cooperatively suppressed the electron-hole recombination and facilitated the charge carrier transfer, thus resulting in significant improvement of the H₂ evolution performance. Moreover, the increased specific surface area and the enhanced visible-light absorption also contributed to superior water splitting performance. The prepared ternary catalytic system with the heterojunction and non-noble metal co-catalyst has great potential as an alternative to noble metals for achieving cost-efficient water splitting systems.

One-step synthesis of reduced graphene oxide based ceric dioxide modified with cadmium sulfide (CeO2/CdS/RGO) heterojunction with enhanced sunlight-driven photocatalytic activity

Heterojunction photocatalyst with efficient photocatalytic performance can remarkably promote the separation of photogenerated charge carriers. Herein, a ternary photocatalyst, reduced graphene oxide (RGO) based CeO₂ modified with CdS (CeO₂/CdS/RGO), was synthesized by a simple one-step hydrothermal method as a bifunctional catalyst for both photodegradation and photoreduction. The ternary composite exhibited a 90.04% photodegradation efficiency to ciprofloxacin (CIP) under simulated sunlight irradiation for 2 h, much higher than CeO₂ (54%). Moreover, CeO₂/CdS/RGO showed broad applicability to the photodegradation of organic pollutants, including norfloxacin (NFX), tetracycline (TC), methylene blue (MB), rhodamine B (RhB), methyl violet (MV), methyl orange (MO) and reactive blue BES (RB). Besides, CeO₂/CdS/RGO exhibited a 100.00% photoreduction efficiency to Cr(VI) within 60 min. The improvement of the photocatalytic performance is ascribed to the modification of CeO₂ with CdS, which improves the separation efficiency of photogenerated carriers. Also, the modification with RGO inhibits the agglomeration of CeO₂, improves the adsorption capacity toward pollutants and provides another nanochannel to separate photogenerated electron-hole (e^--h⁺) pairs. Additionally, the photocatalytic mechanism of CeO₂/CdS/RGO is explored. It is expected that this work would provide a promising way to construct efficient and versatile RGO-based photocatalysts applied to environmental remediation.

An Interface Optimization Strategy for g-C3N4-Based S-Scheme Heterojunction Photocatalysts

Graphitic carbon nitride (CN) has attracted much attention in photocatalytic fields due to its unique electronic band structure. However, the rapid recombination of photogenerated carriers severely inhibits its catalytic activity. The heterojunction structure has been widely confirmed to significantly improve the photocatalytic activity of CN through the formed interface structure. However, researchers often give attention to the band matching and conductivity of the cocatalyst, while the importance of the interface as a migration channel for photogenerated carriers is often overlooked. In this work, we adopt the strategy of morphology engineering to regulate the morphology of the CN photoactive component so as to achieve the interface optimization of the traditional heterojunction structure. The photocatalytic degradation experiment of rhodamine B shows that compared with the traditional CeO₂@CN heterojunction structure, the photocatalytic activity of the interface-optimized CeO₂/CN is increased by more than 20%. The following points could be used to explain the improvement of photocatalytic activity: (I) the formed S-scheme heterojunction structure, which inhibits the recombination of useful electrons and holes but expedites the recombination of relatively useless electrons and holes, (II) the increased interface area, which provides more carrier migration channels, and (III) the reduced interface contact resistance, which facilitates the separation and migration of photogenerated carriers. Furthermore, the interface optimization of the traditional Al₂O₃@CN and Fe₂O₃@CN heterojunction structures also achieved consistent results. This shows that the strategy in this work is a universal method for interface optimization, which provides potential alternative for further improving the catalytic activity of other heterojunction composites.

Construction of Porous Tubular In2S3@In2O3 with Plasma Treatment-Derived Oxygen Vacancies for Efficient Photocatalytic H2O2 Production in Pure Water Via Two-Electron Reduction

Tubular In₂O₃ was fabricated by the annealing of In-MIL-68 and further treated by Ar plasma to yield oxygen vacancies (O_v) followed by the growth of In₂S₃ nanoflowers. Unexpectedly, the resulting porous In₂S₃@In₂O₃ composites were discovered to display a broad visible-light response and especially enhanced capacities for efficient photocatalytic production of H₂O₂ in pure water, with a rate of 4.59 μmol·g^-1·min^-1. An apparent quantum yield of 28.9% at 420 nm can also be expected without the use of noble metals or organic scavengers. Herein, the high light utilization might be profited from their porous tubular heterostructure for powerful "light captivity". Moreover, the Ar plasma-derived O_v sites on the composites might tune the H₂O₂ generation route from the single-electron reduction to the two-electron one toward the significantly enhanced photocatalysis, as validated by the Koutecky-Levich plots. This work demonstrates a new perspective of designing porous heterostructures with the advantages of high light harvest and plasma-derived O_v active sites. Importantly, it may provide a promising defect-induced strategy of two-electron reduction triggered by the plasma treatment for the efficient photocatalytic H₂O₂ production under visible light.

Cd0.8Mn0.2S/MoO3 composites with an S-scheme heterojunction for efficient photocatalytic hydrogen evolution

High-performance and noble metal-free MoO3/Cd0.8Mn0.2S nanocomposites were synthesized via a simple direct physical mixing process. Consequently, from the many characterization methods, the obtained MoO3/Cd0.8Mn0.2S composites exhibited excellent photocatalytic hydrogen production performance and stability. The enhanced photocatalytic activity of the MoO3/Cd0.8Mn0.2S catalyst could be ascribed to the close contact interfaces and well-matched band structure of MoO3 and Mn0.8Cd0.2S, which is beneficial to the transport and separation of photonic excitons. Besides, the hydrogen production performance of the MoO3/Cd0.8Mn0.2S composite catalyst was 1.7 times higher than that of the pure MoO3. Based on the results of time-resolved fluorescence (TRPL) and electrochemical measurements, the possible S-scheme heterojunction mechanism of the photocatalytic hydrogen evolution of MoO3/Cd0.8Mn0.2S was proposed. This work has contributed to the transformation of solar energy into chemical energy.

Visible-light-driven H2 production from heterostructured Zn0.5Cd0.5S–TiO2 photocatalysts modified with reduced graphene oxides

Benefiting from the heterojunction structure and compositional features, the optimized 0.5%RGO/50%Zn0.5Cd0.5S–TiO2 composites exhibited considerable photocatalytic activities for H2 evolution.

Bridge engineering in photocatalysis and photoelectrocatalysis

Solar driven photocatalysis and photoelectrocatalysis have emerged as promising strategies for clean, low-cost, and environmental-friendly production of renewable energy and removal of pollutants. There are three crucial steps for the photocatalytic and photoelectrochemical (PEC) processes: light absorption, charge separation and transportation, and surface catalytic reactions. While significant achievement has been made in developing multiple-component photocatalysts to optimize the three steps for improved solar-to-chemical energy conversion efficiency, it remains challenging when weak interfacial contact between components/particles hinders charge transfer, restricts electron-hole separation and lowers the structural stability of catalysts. Moreover, owing to the mismatch of energy bands, an undesirable charge transfer direction leads to an adverse consequence. To tackle these challenges, bridges are implemented to smoothen the interfacial charge transfer, improve the stability of catalysts, mediate the charge transfer directions and improve the photocatalytic/PEC performance. In this review, we present the advances in bridge engineering in photocatalytic/PEC systems. Starting with the definition and classifications of bridges, we summarize the architectures of the reported bridged photocatalysts. Then we systematically discuss the insight into the roles and fundamental mechanisms of bridges in various photocatalytic/PEC systems and their contributions to activity enhancement in various reactions. Finally, the challenges and perspectives of bridged photocatalysts are featured.

MoS2-wrapped Mn0.2Cd0.8S nanospheres towards efficient photocatalytic H2 generation and CO2 reduction

MoS₂-wrapped Mn_0.2Cd_0.8S nanospheres with intimate interfacial contacts were fabricated, and exhibited excellent photocatalytic performances for H₂-generation and CO₂ reduction.

Phosphating 2D CoAl LDH anchored on 3D self-assembled NiTiO3 hollow rods for efficient hydrogen evolution

Two photo-active materials with opposite potential, NiTiO₃ and CoAl LDH are rationally integrated into a combinant. It efficiently accelerates the separation and migration of photo-excited electrons and enhance thermodynamic hydrogen evolution.

Efficient photocatalytic hydrogen production by Mn0.05Cd0.95S nanoparticles anchored on cubic NiSe2

In the field of catalysis, three critical factors for evaluating catalyst activity include charge separation efficiency, photoabsorption, and surface activity sites.

Controllable design of double metal oxide (NiCo2O4)-modified CdS for efficient photocatalytic hydrogen production

In the present study, we have successfully synthesized a kind of high-efficiency NiCo₂O₄/CdS composite photocatalyst using the hydrothermal method and high-temperature calcination.

Photocatalytic Activation of Saturated C-H Bond Over the CdS Mixed-Phase Under Visible Light Irradiation

Selective activation of saturated C–H bond in hydrocarbons to produce high-value-added chemicals is of great significance for chemical synthesis and transformation. Herein, we present a facile procedure to achieve Ni-doped CdS nanoparticles with mixed (cubic and hexagonal) phases, as well as its application to the photocatalytic activation of saturated primary C–H bond of toluene and its derivatives. The photocatalytic oxidation rate of toluene into benzaldehyde of formation reached up to 216.7 μmolh⁻¹g⁻¹ under visible light irradiation. The excellent photocatalytic performance of Ni(II)-doped CdS [Ni(II)/CdS] can be attributed to its unique structural assembly with cubic and hexagonal phases and also the addition of Ni ions, together taking effect in promoting the separation of photogenerated charge carriers. The possible reaction mechanism for the photocatalytic selective oxidation is illustrated in this work. The band width of the as-prepared mixed phase CdS is reduced, which can effectively expand the response range and improve photocatalytic performance.

Biocompatible FeOOH-Carbon quantum dots nanocomposites for gaseous NOx removal under visible light: Improved charge separation and High selectivity

Development of biocompatible photocatalysts with improved charge separation and high selectivity is essential for effective removal of air pollutants. Iron-containing catalysts have attracted extensive attention due to their low-toxicity and high natural abundance. Here, carbon quantum dots (CQDs) modified FeOOH nanocomposites fabricated using a facile hydrothermal route showed enhanced NO removal efficiency (22%) compared to pure FeOOH. Moreover, generation of toxic NO₂ intermediates was significantly inhibited using the nanocomposites, demonstrating high selectivity for final nitrate formation. Photo-electrochemical results showed that both charge separation and transfer efficiency were significantly improved by CQDs addition, and the lifetime of photo-generated carriers was increased eventually. Density functional theory calculations further elucidated that the suppressed recombination of photo-induced electron-hole pairs was due to enhanced electron migration from the FeOOH to CQDs. A NO degradation mechanism was proposed based on detection of the reactive oxygen species using electron paramagnetic spectroscopy. In addition, the nanocomposite showed good biocompatibility and low cytotoxity, ensuring minimal environmental impact for potential application in large-scale.