Online Kinetics Study of Oxidative Coupling of Methane over La2O3 for Methane Activation: What Is Behind the Distinguished Light-off Temperatures?

Photocatalytic Oxidative Coupling of Methane over Au1 Ag Single-Atom Alloy Modified ZnO with Oxygen and Water Vapor: Synergy of Gold and Silver

C-H dissociation and C-C coupling are two key steps in converting CH4 into multi-carbon compounds. Here we report a synergy of Au and Ag to greatly promote C2 H6 formation over Au1 Ag single-atom alloy nanoparticles (Au1 Ag NPs)-modified ZnO catalyst via photocatalytic oxidative coupling of methane (POCM) with O2 and H2 O. Atomically dispersed Au in Au1 Ag NPs effectively promotes the dissociation of O2 and H2 O into *OOH, promoting C-H activation of CH4 on the photogenerated O- to form *CH3 . Electron-deficient Au single atoms, as hopping ladders, also facilitate the migration of electron donor *CH3 from ZnO to Au1 Ag NPs. Finally, *CH3 coupling can readily occur on Ag atoms of Au1 Ag NPs. An excellent C2 H6 yield of 14.0 mmol g-1  h-1 with a selectivity of 79 % and an apparent quantum yield of 14.6 % at 350 nm is obtained via POCM with O2 and H2 O, which is at least two times that of the photocatalytic system. The bimetallic synergistic strategy offers guidance for future catalyst design for POCM with O2 and H2 O.

Improved Low-Temperature Hydrogen Production from Aqueous Methanol Based on Synergism between Cationic Pt and Interfacial Basic LaOx

Aqueous phase reforming of methanol (APRM) is simple, inexpensive and provides a high hydrogen gravimetric density of 18.8 wt. %, and so is superior to traditional gas-phase reactions performed at relatively high temperatures. In the present work, the interface between Pt nanoparticles and a TiN support was modified using a highly dispersed amorphous LaOx phase. The resulting Pt/LaOx /TiO(N) exhibited enhanced activity and long-term stability during the APRM reaction under base-free conditions compared with Pt catalysts supported on unmodified TiN or crystalline La2 O3 . The interfacial amorphous LaOx phase promoted the deposition of small Pt nanoparticles having a narrow size distribution, and also generated electron-deficient Pt. An assessment of kinetic isotope data and theoretical investigations demonstrated that the cationic Pt nanoparticles facilitated the cleavage of O-H and C-H bonds in methanol while the amorphous LaOx enhanced the dissociation of water, thus enabling the water-gas shift reaction under mild conditions.

Photocatalytic Oxidative Coupling of Methane to Ethane Using Water and Oxygen on Ag3PO4-ZnO

Photocatalytic oxidative coupling is an effective way of converting CH4 to high-value-added multi-carbon chemicals under mild conditions, where the breaking of the C-H bond is the main rate-limiting step. In this paper, the Ag3PO4-ZnO heterostructure photocatalyst was synthesized for photocatalytic oxidative coupling of methane (OCM) to C2H6. In addition, an excellent C2H6 yield (16.62 mmol g-1 h-1) and a remarkable apparent quantum yield (15.8% at 350 nm) at 49:1 CH4/Air and 20% RH are obtained, which is more than three times that of the state-of-the-art photocatalytic systems. Ag3PO4 improves the adsorption and dissociation ability of O2 and H2O, benefiting the formation of surface hydroxyl species. As a result, the C-H bond activation energy of CH4 on ZnO was obviously reduced. Meanwhile, the improved separation of photogenerated carriers on the Ag3PO4-ZnO heterostructure also accelerates the OCM process. Moreover, Ag nanoparticles (NPs) derived from Ag3PO4 reduction by photoelectrons promote the coupling of *CH3, which can inhibit the overoxidation of CH4 and increase C2H6 selectivity. This research provides a guide for the design of catalyst and reaction systems in the photocatalytic OCM process.

Importance of Process Variables and Their Optimization for Oxidative Coupling of Methane (OCM)

Oxidative coupling of methane (OCM) is a promising process for converting natural gas into high-value chemicals such as ethane and ethylene. The process, however, requires important improvements for commercialization. The foremost is increasing the process selectivity to C₂ (C₂H₄ + C₂H₆) at moderate to high levels of methane conversion. These developments are often addressed at the catalyst level. However, optimization of process conditions can lead to very important improvements. In this study, a high-throughput screening (HTS) instrument was utilized for La₂O₃/CeO₂ (3.3 mol % Ce) to generate a parametric data set within the temperature range of 600-800 °C, CH₄/O₂ ratio between 3 and 13, pressure between 1 and 10 bar, and catalyst loading between 5 and 20 mg leading to space-time between 40 and 172 s. Statistical design of experiments (DoE) was applied to gain insights into the effect of operating parameters and to determine the optimal operating conditions for maximum production of ethane and ethylene. Rate-of-production analysis was used to shed light on the elementary reactions involved in different operating conditions. The data obtained from HTS experiments established quadratic equations relating the studied process variables and output responses. The quadratic equations can be used to predict and optimize the OCM process. The results demonstrated that the CH₄/O₂ ratio and operating temperatures are key for controlling the process performance. Operating at higher temperatures with high CH₄/O₂ ratios increased the selectivity to C₂ and minimized CO_x (CO + CO₂) at moderate conversion levels. In addition to process optimization, DoE results also allowed the flexibility of manipulating the performance of OCM reaction products. A C₂ selectivity of 61% and a methane conversion of 18% were found to be optimum at 800 °C, a CH₄/O₂ ratio of 7, and a pressure of 1 bar.

Instant Fingerprint Discrimination for Military Explosive Vapors by Dy3+ Doping a La2O3-Based Cataluminescence Sensor System

With the intensification of explosive-based terrorism attack and environmental concerns, the innovation of high-efficiency and portable sensors for facile, rapid, and reliable monitoring of explosives has become one of the major demands in societies. Herein, a reliable and easy-to-use cataluminescence sensor system based on Dy³⁺ doping La₂O₃ nanorod catalysts has been developed for the identification and detection of six types of military explosive vapors, including homologous compounds and even isomers. The efficient discrimination is to make full use of the thermodynamic and kinetic information that can be extracted from the catalytic oxidation process of explosive molecules on various sensing materials, that is, the response signal and response time to generate the fingerprint of each target compound, while the rapid detection of the strategy can be manifested in response toward six military explosive vapors within 2.5 s and recover within 4 s. Meanwhile, the quantitative analysis of the explosives by the sensor system was realized based on 0.8%Dy:La₂O₃ with optimal catalytic activity, and the detection limits of NB, m-MNT, m-DNB, PNT, DNT, and TNT can reach 0.62, 0.49, 0.63, 0.38, 0.023, and 0.067 μg mL^-1. In this research, we also constructed a novel sensor device and detection platform for explosive monitoring, which is of great significance for providing a new sensing principle for the efficient identification of explosives.

Peroxide-Selective Reduction of O2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La-Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93-99% O₂^2-) reduction of dioxygen (O₂) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr^III₂(O₂^2-)(18C6)₂(EG)₂][OTf]₄; 18C6 = 18-crown-6, EG = ethylene glycol, ^-OTf = ^-O₃SCF₃; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK_a1(MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal-ligand binding events preceding electron transfer.

High-performance photocatalytic nonoxidative conversion of methane to ethane and hydrogen by heteroatoms-engineered TiO2

Nonoxidative coupling of methane (NOCM) is a highly important process to simultaneously produce multicarbons and hydrogen. Although oxide-based photocatalysis opens opportunities for NOCM at mild condition, it suffers from unsatisfying selectivity and durability, due to overoxidation of CH₄ with lattice oxygen. Here, we propose a heteroatom engineering strategy for highly active, selective and durable photocatalytic NOCM. Demonstrated by commonly used TiO₂ photocatalyst, construction of Pd-O₄ in surface reduces contribution of O sites to valence band, overcoming the limitations. In contrast to state of the art, 94.3% selectivity is achieved for C₂H₆ production at 0.91 mmol g^-1 h^-1 along with stoichiometric H₂ production, approaching the level of thermocatalysis at relatively mild condition. As a benchmark, apparent quantum efficiency reaches 3.05% at 350 nm. Further elemental doping can elevate durability over 24 h by stabilizing lattice oxygen. This work provides new insights for high-performance photocatalytic NOCM by atomic engineering.

Oxidative Coupling of Methane: Examining the Inactivity of the MnOx -Na2 WO4 /SiO2 Catalyst at Low Temperature

Oxidative coupling of methane (OCM) catalyzed by MnO_x -Na₂ WO₄ /SiO₂ has great industrial promise to convert methane directly to C_2-3 products, but its high light-off temperature is the most challenging obstacle to commercialization and its working mechanism is still a mystery. We report the discovery of a low-temperature active and selective MnO_x -Na₂ WO₄ /SiO₂ catalyst enriched with Q² units in the SiO₂ carrier, being capable of converting 23 % CH₄ with 72 % C_2-3 selectivity at 660 °C. From experiments and theoretical calculations, a large number of Q² units in the MnO_x -Na₂ WO₄ /SiO₂ catalyst is a trigger for markedly lowering the light-off temperature of the Mn³⁺ ↔Mn²⁺ redox cycle involved in the OCM reaction because of the easy formation of MnSiO₃ . Notably, the MnSiO₃ formation proceeds merely through the SiO₂ -involved reaction in the presence of Na₂ WO₄ : Mn₇ SiO₁₂ +6 SiO₂ ↔7 MnSiO₃ +1.5 O₂ . The Na₂ WO₄ not only drives the light-off of this cycle but also gets it working with substantial selectivity toward C_2-3 products. Our findings shine a light on the rational design of more advanced MnO_x -Na₂ WO₄ based OCM catalysts through establishing new Mn³⁺ ↔Mn²⁺ redox cycles with lowered light-off temperature.

Oxidative Coupling of Methane for Ethylene Production: Reviewing Kinetic Modelling Approaches, Thermodynamics and Catalysts

Ethylene production via oxidative coupling of methane (OCM) represents an interesting route for natural gas upscaling, being the focus of intensive research worldwide. Here, OCM developments are analysed in terms of kinetic mechanisms and respective applications in chemical reactor models, discussing current challenges and directions for further developments. Furthermore, some thermodynamic aspects of the OCM reactions are also revised, providing achievable olefins yields in a wide range of operational reaction conditions. Finally, OCM catalysts are reviewed in terms of respective catalytic performances and thermal stability, providing an executive summary for future studies on OCM economic feasibility.

A combined computational and experimental study of methane activation during oxidative coupling of methane (OCM) by surface metal oxide catalysts

The experimentally validated computational models developed herein, for the first time, show that Mn-promotion does not enhance the activity of the surface Na2WO4 catalytic active sites for CH4 heterolytic dissociation during OCM. Contrary to previous understanding, it is demonstrated that Mn-promotion poisons the surface WO4 catalytic active sites resulting in surface WO5 sites with retarded kinetics for C-H scission. On the other hand, dimeric Mn2O5 surface sites, identified and studied via ab initio molecular dynamics and thermodynamics, were found to be more efficient in activating CH4 than the poisoned surface WO5 sites or the original WO4 sites. However, the surface reaction intermediates formed from CH4 activation over the Mn2O5 surface sites are more stable than those formed over the Na2WO4 surface sites. The higher stability of the surface intermediates makes their desorption unfavorable, increasing the likelihood of over-oxidation to CO x , in agreement with the experimental findings in the literature on Mn-promoted catalysts. Consequently, the Mn-promoter does not appear to have an essential positive role in synergistically tuning the structure of the Na2WO4 surface sites towards CH4 activation but can yield MnO x surface sites that activate CH4 faster than Na2WO4 surface sites, but unselectively.

An In Situ Temperature-Dependent Study of La2O3 Reactivation Process

Lanthanum-containing materials are widely used in oxidative catalytic and electrocatalytic reactions such as oxidative coupling of methane (OCM) and solid oxide fuel cells (SOFCs). However, many of these materials are highly susceptible to air contamination which means ex situ characterization results generally cannot be associated with their reactivity. In this study, the activation processes of an in situ–prepared bulk La₂O₂CO₃ sample and an ex situ as-prepared La(OH)₃ sample are in situ investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and online mass spectroscopy (MS). Results indicate that the La₂O₂CO₃ sample, during linear heating to 800°C, always contains some carbonates near the surface region, which supports a two-step model of bulk carbonate decomposition through surface sites. The La(OH)₃ sample structure evolution is more complex due to contaminations from air exposure. Together with TGA results, online mass analysis of water and CO₂ signal loss showed that three major catalyst structure phase change steps and a preheating up to 800°C are required for the as-prepared material to be transferred to La₂O₃. This process is carefully investigated combining the three in situ methodologies. XPS and XRD data further reveal transformations of variety of in situ surface structures and forms including hybrid phases with hydroxyl, carbonates, and oxide as the sample heated to different temperatures within the range from 200 to 800°C. The results provide useful insights on the activation and deactivation of La-contained materials.

Exploring the formation of carbonates on La2O3 catalysts with OCM activity

Two series of La2O3 samples with identical bulk structures but different morphologies indicate substantially different carbonate forming pathways, which provides insight into the related oxidative coupling of methane (OCM) reaction.

Lanthanum modified Fe-ZSM-5 zeolites for selective methane oxidation with H2O2

Lanthanum modified Fe-ZSM-5 catalyst can both increase selective methane oxidation performance and decrease H2O2 consumption.

Mechanism of selective and complete oxidation in La2O3-catalyzed oxidative coupling of methane

The catalytic mechanism and reaction network of oxidative coupling of methane over La₂O₃ are thoroughly investigated by density functional theory calculations.

Catalyst screening for the oxidative coupling of methane: from isothermal to adiabatic operation via microkinetic simulations

OCM catalysts underperforming in typical isothermal conditions could result in above average performances in adiabatically-relevant operating conditions.

Understanding of binding energy calibration in XPS of lanthanum oxide by in situ treatment

Rare earth oxides have seen increased usage over the years in batteries and catalysts. Due to their unique electronic properties, they are the subject of fundamental and practical interest. However, the complexity in their electronic structures makes unambiguous characterization, such as X-ray photoelectron spectroscopy (XPS), very challenging. Lanthanum oxide (La₂O₃) has attracted special attention as a promising catalyst for the oxidative coupling of methane (OCM) reaction. In this work, a new and reliable way of XPS calibration is developed by applying various in situ preparations for a nanorod La₂O₃ catalyst to intentionally form different lanthanum compounds, followed by XPS characterization and corroboration with first principles calculations. To form different compounds, five sample treatments were performed including heating in vacuum and treatment with O₂, CH₄, CO₂, and H₂O, which are all relevant to OCM reaction conditions. Adventitious carbon or lattice oxygen, as conventional calibration standard species for energy scale, is only suitable for one or few in situ prepared surfaces. Our results also clearly demonstrate the vital difference between performing the ex situ analysis after exposure of the sample to the atmosphere and the in situ analysis. By carefully comparing the spectra of various photoemission peaks of different compounds, we conclude that the binding energy of 102.2 eV for the La 4d_7/2 peak can be used as the internal calibration standard for all considered samples. Furthermore, different oxygen species were unambiguously identified by matching the oxygen 1s binding energies from the in situ measurements and first principles predictions.