Effect of Surface Hydrophobicity of Pd/Al2O3 on Vanillin Hydrodeoxygenation in a Water/Oil System

Toward High-Performance Hydrogenation at Room Temperature Through Tailoring Nickel Catalysts Stable in Aqueous Solution

The development of highly active, reusable catalysts for aqueous-phase reactions is challenging. Herein, metallic nickel is encapsulated in a nitrogen-doped carbon-silica composite (SiO2@Ni@NC) as a catalyst for the selective hydrogenation of vanillin in aqueous media. The constructed catalyst achieved 99.8% vanillin conversion and 100% 4-hydroxymethyl-2-methoxyphenol selectivity at room temperature. Based on combined scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman analyses, the satisfactory catalytic performance is attributed to the composite structure consisting of an active metal, carbon, and silica. The hydrophilic silica core promoted dispersion of the catalyst in aqueous media. Moreover, the external hydrophobic NC layer has multiple functions, including preventing oxidation or leaching of the internal metal, acting as a reducing agent to reduce the internal metal, regulating the active-site microenvironment by enriching the concentrations of H2 and organic reactants, and modifying the electronic structure of the active metal via metal-support interactions. Density functional theory calculations indicated that NC facilitates vanillin adsorption and hydrogen dissociation to promote aqueous-phase hydrogenation. This study provides an efficient strategy for constructing encapsulated Ni-based amphiphilic catalysts to upgrade biomass-derived compounds.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed with highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid emulsifiers for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9 times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Pickering emulsions are particle-stabilized surfactant-free dispersions composed of two immiscible liquid phases, and emerge as attractive catalysis platform to surpass traditional technique barrier in some cases. In this review, we have comprehensively summarized the development and the catalysis applications of Pickering emulsions since the pioneering work in 2010. The explicit mechanism for Pickering emulsions will be initially discussed and clarified. Then, summarization is given to the design strategy of amphiphilic emulsion catalysts in two categories of intrinsic and extrinsic amphiphilicity. The progress of the unconventional catalytic reactions in Pickering emulsion is further described, especially for the polarity/solubility difference-driven phase segregation, "smart" emulsion reaction system, continuous flow catalysis, and Pickering interfacial biocatalysis. Challenges and future trends for the development of Pickering emulsion catalysis are finally outlined.

High-Performance Heterogeneous Thermocatalysis Caused by Catalyst Wettability Regulation

Catalyst wettability regulation has emerged as an attractive approach for high catalytic performance for the past few years. By introducing appropriate wettability, the molecule diffusion of reactants and products can be enhanced, leading to high activity. Besides this, undesired molecules are isolated for high selectivity of target products and long-term stability of catalyst. Herein, we summarize wettability-induced high-performance heterogeneous thermocatalysis in recent years, including hydrophilicity, hydrophobicity, hybrid hydrophilicity-hydrophobicity, amphiphilicity, and superaerophilicity. Relevant reactions are further classified and described according to the reason for the performance improvement. It should be pointed out that studies of utilizing superaerophilicity to improve heterogeneous thermocatalytic performance have been included for the first time, so this is a comparatively comprehensive review in this field as yet.

Passivating the pH-Responsive Sites to Configure a Widely pH-Stable Emulsifier for High-Efficiency Benzyl Alcohol Oxidation

Widely pH-stable emulsions configured by solid emulsifiers with high chemical stabilities and anti-corrosion properties under strong acid or alkaline conditions are highly sought after for practical and wide application of Pickering interfacial catalysis. Herein, a unique strategy was reported for synthesis of a widely pH-stable and novel emulsifier by passivating the pH-responsive sites on graphene oxide nanoribbon (GONR) surface using ionic liquid (IL). The suitable wettability of GONR-IL was derived from the positive binding energy between IL and water, which ensured the stability of the emulsion in a wide pH range. Benefiting from the passivated surface chemistry of GONR, the emulsion microreactor stabilized by GONR-IL exhibited a remarkable stability over a wide range of pH values. A GONR-IL-supported Pd catalyst stabilized at the toluene-water interface achieved an excellent emulsion catalytic activity for benzyl alcohol oxidation (conversion of 92 %), which was exceedingly higher than that of Pd/GONR (<1 %), Pd/CNTs-IL (51 %), or Pd/GO-IL (8 %).

Temperature-Controlled Selectivity of Hydrogenation and Hydrodeoxygenation of Biomass by Superhydrophilic Nitrogen/Oxygen Co-Doped Porous Carbon Nanosphere Supported Pd Nanoparticles

Selective hydrogenation and hydrodeoxygenation (HDO) of biomass to value-added products play a crucial role in the development of renewable energy resources. However, achieving a temperature-controlled selectivity within one catalytic system while retaining excellent hydrogenation and HDO performance remains a great challenge. Here, nitrogen/oxygen (N/O) co-doped porous carbon nanosphere derived from resin polymer spheres is synthesized as the host matrix to in situ encapsulate highly dispersed Pd nanoparticles (NPs). Through N/O co-doping, the defects on the surface of carbon structure can serve as active sites to promote substrate adsorption. After a facile H₂ O₂ post-treatment process, the presence of abundant carboxyl groups on the porous carbon nanospheres can act as acidic sites to replace the use of acidic additives in the HDO process. Additionally, the increased surface oxygen-containing groups improve hydrophilicity to disperse catalysts in aqueous solutions. Owing to the unique highly dispersed Pd NPs and abundant surface defects, the Pd@APF-H₂ O₂ (2.3 nm) catalysts exhibit excellent catalytic activity and temperature-controlled selectivity for hydrogenation and HDO products of biomass-derived vanillin.

Robust MOF-derived carbon-supported bimetallic Ni-Co catalysts for aqueous phase hydrodeoxygenation of vanillin

Currently, rapidly increasing consumption of fossil resources has propelled the upgrading of biomass as an alternative and sustainable technology to produce important chemicals and bio-oils. In this regard, the rational design of low-cost and robust supported metal-based catalysts that exhibit excellent catalytic hydrodeoxygenation (HDO) performance for the conversion of biomass is quite necessary. Herein, we developed hierarchical flower-like nitrogen-doped carbon layer-coated bimetallic Ni-Co nanoparticles, which were distributed over the carbonaceous matrix (Ni_xCo@NC@C), via a metal-organic framework (MOF) ZIF-67 precursor approach, assisted by the etching of Ni²⁺ ions, hydrothermal treatment together with glucose, and following carbonization processes. The as-fabricated Ni₃Co@NC@C catalyst bearing a 3 : 1 Ni/Co molar ratio showed a superior catalytic HDO activity towards aqueous phase HDO of vanillin to other bimetallic NiCo catalysts with different Ni/Co molar ratios under mild reaction conditions, along with a 100% selectivity to 2-methoxy-4-methylphenol at a full vanillin conversion, despite its smaller number of exposed metallic sites. It was revealed that over the Ni₃Co@NC@C catalyst, the surface abundant defective oxygen vacancies and electron-rich Co⁰ species were conducive to the adsorption and activation of vanillin and the reaction intermediate, thereby giving rise to the outstanding catalytic activity. Moreover, for Ni₃Co@NC@C, the adequate protection effect of surface carbon layers, as well as the unique hierarchical flower-like microstructure, could significantly inhibit the leaching of active metal species in the reaction medium, thereby leading to high structural stability. The present findings afford a promising strategy for constructing low-cost and robust carbon-supported bimetallic catalysts for the HDO of lignin-derived derivatives.

Upgrading bio-oil model compound over bifunctional Ru/HZSM-5 catalysts in biphasic system: Complete hydrodeoxygenation of vanillin

A complete hydrodeoxygenation(HDO) of vanillin to yield cycloalkanes was performed using bifunctional Ru loaded HZSM-5 catalysts with different metal loadings (0.1, 0.5, 1, 3, and 5 wt%) and Si/Al₂ ratios (Si/Al₂ = 23,300) in n-octane/water biphasic system. Both the reaction pathway and product distribution were influenced by the metal/acid balance of the catalysts. Higher metal/acid ratio promoted C_aryl-C cleavage reaction, resulting in the increased yield of cyclohexane. Synergetic effect of metal and acid sites was observed in the bifunctional catalyst, attaining as high as 40-fold increase of metal efficiency in the ring hydrogenation reaction, compared to lone metal site catalyst. The effect of solvent composition was evaluated, revealing that the presence of water promoted the overall HDO reaction. By balancing metal/acid and introducing appropriate solvent system, efficient catalytic system that minimized carbon loss and improved metal efficiency for vanillin HDO was obtained.

Multiphase Microreactors Based on Liquid-Liquid and Gas-Liquid Dispersions Stabilized by Colloidal Catalytic Particles

Pickering emulsions, foams, bubbles, and marbles are dispersions of two immiscible liquids or of a liquid and a gas stabilized by surface-active colloidal particles. These systems can be used for engineering liquid-liquid-solid and gas-liquid-solid microreactors for multiphase reactions. They constitute original platforms for reengineering multiphase reactors towards a higher degree of sustainability. This Review provides a systematic overview on the recent progress of liquid-liquid and gas-liquid dispersions stabilized by solid particles as microreactors for engineering eco-efficient reactions, with emphasis on biobased reagents. Physicochemical driving parameters, challenges, and strategies to (de)stabilize dispersions for product recovery/catalyst recycling are discussed. Advanced concepts such as cascade and continuous flow reactions, compartmentalization of incompatible reagents, and multiscale computational methods for accelerating particle discovery are also addressed.

Investigating deposition sequence during synthesis of Pd/Al2O3 catalysts modified with organic monolayers

Modification of supported metal catalysts with self-assembled monolayers (SAMs) has been shown to improve selectivity and turnover frequencies (TOFs) for many catalytic reactions. However, these benefits are often accompanied by...

Controlling Heterogeneous Catalysis with Organic Monolayers on Metal Oxides

ConspectusA key theme of heterogeneous catalysis research is achieving control of the environment surrounding the active site to precisely steer the reactivity toward desired reaction products. One method toward this goal has been the use of organic ligands or self-assembled monolayers (SAMs) on metal nanoparticles. Metal-bound SAMs are typically employed to improve catalyst selectivity but often decrease the reaction rate as a result of site blocking from the ligands. Recently, the use of metal oxide-bound organic modifiers such as organophosphonic acid (PA) SAMs has shown promise as an additional method for tuning reactions on metal oxide surfaces as well as modifying oxide-supported metal catalysts. In this Account, we summarize recent approaches to enhance catalyst performance with oxide-bound monolayers. These approaches include (1) modification of metal oxide catalysts to tune surface reactions, (2) formation of SAMs on the oxide component of supported metal catalysts to modify sites at the metal-support interface, and (3) enhancement of catalyst performance (e.g., stability) through modification of sites remote from the active sites.Both the headgroups and organic tail groups of PA SAMs or other ligands can influence reactions on metal oxide surfaces. Binding of the headgroup can selectively poison certain active sites, altering the selectivity in a manner analogous to metal-bound ligands (at the expense of active site quantity). Moreover, tail groups can be functionalized to interact favorably with reactants and intermediates, for instance through dipole-dipole interactions. On supported metal catalysts like Pt/Al₂O₃, PA SAMs can selectively form on the oxide support. This selective deposition allows for modification of the metal-support interface with minimal blockage of metal sites. PA headgroups were shown to provide tunable acid sites at the interface, dramatically improving hydrodeoxygenation rates of various alcohols. Additionally, organic tail functionality was used to activate or stabilize specific reactants at the interface, such as with the use of amine-functionalized PAs to stabilize chemisorption of CO₂ during the reverse water gas shift reaction. PAs have also been found to affect the electronic properties of bulk metal sites through long-range electron withdrawal via the oxide, providing an additional avenue to tune catalytic behavior. Finally, organic modifiers were shown to enhance catalytic performance without directly modifying the active site. For instance, in biphasic liquid environments the modification of catalyst particles with hydrophobic or hydrophilic SAMs shifts the selectivity of multipath reactions on the basis of the hydrophobicities of different intermediates and products. As another "long-range" effect, the deposition of ligands on oxide supports improved catalyst stability through both improved resistance to sintering and suppression of active site poisoning. The recent contributions discussed in this Account demonstrate the versatility and significant potential for the approach of modifying catalysts with oxide-bound organic monolayers.

Effect of Particle Wettability and Particle Concentration on the Enzymatic Dehydration of n-Octanaloxime in Pickering Emulsions

Pickering emulsion systems have emerged as platforms for the synthesis of organic molecules in biphasic biocatalysis. Herein, the catalytic performance was evaluated for biotransformation using whole cells exemplified for the dehydration of n-octanaloxime to n-octanenitrile catalysed by an aldoxime dehydratase (OxdB) overexpressed in E. coli. This study was carried out in Pickering emulsions stabilised solely with silica particles of different hydrophobicity. We correlate, for the first time, the properties of the emulsions with the conversion of the reaction, thus gaining an insight into the impact of the particle wettability and particle concentration. When comparing two emulsions of different type with similar stability and droplet diameter, the oil-in-water (o/w) system displayed a higher conversion than the water-in-oil (w/o) system, despite the conversion in both cases being higher than that in a "classic" two-phase system. Furthermore, an increase in particle concentration prior to emulsification resulted in an increase of the interfacial area and hence a higher conversion.

Catalysis in Pickering emulsions

Particle-stabilised or Pickering emulsions are versatile systems. In the past 10 years a new application has emerged in the field of catalysis to use them as vehicles to carry out catalytic reactions, allowing a more environmentally friendly process with high conversions and selectivities and important advantages for catalyst recovery. As the area has advanced rapidly, the intention of this review is to summarize the latest innovations being reported. An overview is given regarding the kinds of liquid phases comprising the emulsion system, the different types of solid particle stabilizers (whether they contain catalyst or not) and the catalytic reactions studied. A section describing methods for recovering the catalyst is also included, in which various stimuli are discussed. Finally, the importance of using Pickering emulsions to carry out reactions in flow and in multi-step cascade systems is highlighted with various examples to support the benefits of transferring this technology to industrial processes.

Controlling Catalyst-Phase Selectivity in Complex Mixtures with Amphiphilic Janus Particles

Amphiphilic Janus particles with a catalyst selectively loaded on either the hydrophobic or hydrophilic region are promising candidates for efficient and phase-selective interfacial catalysis. Here, we report the synthesis and characterization of Janus silica particles with a hydrophilic silica domain and a silane-modified hydrophobic domain produced via a wax masking technique. Palladium nanoparticles were regioselectively deposited on the hydrophobic side, and the phase selectivity of the catalytic Janus particles was established through the kinetic studies of benzyl alcohol hydrodeoxygenation (HDO). These studies indicated that the hydrophobic moiety provided nearly 100× the catalytic activity as the hydrophilic side for benzyl alcohol HDO. The reactivity was linked to the anisotropic catalyst design through microscopy of the particles. The catalysts were also used to achieve phase-specific compartmentalized hydrogenation and selective in situ catalytic degradation of a model oily pollutant in a complex oil/water mixture.

Preparation of a Pickering emulsion by modification of an amine-functionalized graphene oxide surface with organosilane: efficient catalyst for the Knoevenagel condensation of malononitrile with aldehydes at mild temperature

In this study, a series of Pickering emulsions for catalysis of Knoevenagel condensations of malononitrile with aldehydes were prepared by surface modification of amine-functionalized graphene oxide (GO-NH₂) with trimethoxymethylsilane (MTMS).

Advances in porous and nanoscale catalysts for viable biomass conversion

Solid catalysts with unique porosity and nanoscale properties play a promising role for efficient valorization of biomass into sustainable advanced fuels and chemicals.

Cooperative catalysis at the metal–MOF interface: hydrodeoxygenation of vanillin over Pd nanoparticles covered with a UiO-66(Hf) MOF

Cooperative catalysis has been demonstrated over metal–MOF hybrids for the conversion of vanillin (biomass based platform molecules) into value-added 2-methoxy-4-methylphenol.