Tailored Strength Neighboring Group Interactions Switch Polymerization to Dimerization Catalysis

Impact of o-aryl halogen effects on ethylene polymerization: steric vs. electronic effects

Ligand steric hindrance and electronic effects play a crucial role in late-transition metal-catalyzed olefin polymerization. In this research, a series of o-aryl halogenated α-diimine ligands bearing bulky dibenzhydryl substituents, along with their corresponding nickel catalysts, have been synthesized and thoroughly characterized. The nickel catalysts demonstrated very high activity in ethylene polymerization, achieving a high rate of up to 107 g mol-1 h-1. The produced polyethylenes displayed a broad spectrum of molecular weights (12.2-871.7 kg mol-1) but maintained consistent branching densities (50-82/1000 C) when polymerized at a fixed temperature with different nickel catalysts. Notably, the polymerization temperature has a significant influence on both the molecular weight and branching density of the resulting polyethylene. Higher temperatures led to the formation of polyethylenes with lower molecular weights and increased branching densities. Interestingly, the o-aryl halogens significantly impact the molecular weight of the polyethylene. The size of the halogen substituents primarily determines the molecular weight of the polyethylene. However, in terms of branching density, the steric and electronic effects of these substituents appear to counteract each other. In addition, the branched high molecular weight polyethylenes from the bromine and chlorine substituted nickel catalysts are excellent polyethylene thermoplastic elastomers with high strain at break values (688-2478%) and high strain recovery values (42-62%).

Amine-Imine Nickel Catalysts with Pendant O-Donor Groups for Ethylene (Co)Polymerization

The introduction of a secondary interaction is an efficient strategy to modulate transition-metal-catalyzed ethylene (co)polymerization. In this contribution, O-donor groups were suspended on amine-imine ligands to synthesize a series of nickel complexes. By adjusting the interaction between the nickel metal center and the O-donor group on the ligands, these nickel complexes exhibited high activities for ethylene polymerization (up to 3.48 × 10⁶ g_PE·mol_Ni^-1·h^-1) with high molecular weight up to 5.59 × 10⁵ g·mol^-1 and produced good polyethylene elastomers (strain recovery (SR) = 69-81%). In addition, these nickel complexes can catalyze the copolymerization of ethylene with vinyl acetic acid, 6-chloro-1-hexene, 10-undecylenic, 10-undecenoic acid, and 10-undecylenic alcohol to prepare the functionalized polyolefins.

Recent Advances in the Copolymerization of Ethylene with Polar Comonomers by Nickel Catalysts

The less-expensive and earth-abundant nickel catalyst is highly promising in the copolymerization of ethylene with polar monomers and has thus attracted increasing attention in both industry and academia. Herein, we have summarized the recent advancements made in the state-of-the-art nickel catalysts with different types of ligands for ethylene copolymerization and how these modifications influence the catalyst performance, as well as new polymerization modulation strategies. With regard to α-diimine, salicylaldimine/ketoiminato, phosphino-phenolate, phosphine-sulfonate, bisphospnine monoxide, N-heterocyclic carbene and other unclassified chelates, the properties of each catalyst and fine modulation of key copolymerization parameters (activity, molecular weight, comonomer incorporation rate, etc.) are revealed in detail. Despite significant achievements, many opportunities and possibilities are yet to be fully addressed, and a brief outlook on the future development and long-standing challenges is provided.

Highly Active Heterogeneous Catalyst for Ethylene Dimerization Prepared by Selectively Doping Ni on the Surface of a Zeolitic Imidazolate Framework

The production of 1-butene by ethylene dimerization is an important chemical industrial process currently implemented using homogeneous catalysts. Here, we describe a highly active heterogeneous catalyst (Ni-ZIF-8) for ethylene dimerization, which consists of isolating Ni-active sites selectively located on the crystal surface of a zeolitic imidazolate framework. Ni-ZIF-8 can be easily prepared by a simple one-pot synthesis method in which site-specific anchoring of Ni is achieved spontaneously because of the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional framework of ZIF-8. The full exposure and square-planar coordination of the Ni sites accounts for the high catalytic activity of Ni-ZIF-8. It exhibits an average ethylene turnover frequency greater than 1 000 000 h^-1 (1-butene selectivity >85%) at 35 °C and 50 bar, far exceeding the activities of previously reported heterogeneous catalysts and many homogeneous catalysts under similar conditions. Moreover, compared to molecular Ni complexes used as homogeneous catalysts for ethylene dimerization, Ni-ZIF-8 has significantly higher stability and shows constant activity during 4 h of continuous reaction. Isotopic labeling experiments indicate that ethylene dimerization over Ni-ZIF-8 follows the Cossee-Arlman mechanism, and detailed characterizations combined with density functional theory calculations rationalize this observed high activity.

Neutral Nickel(II) Catalysts: From Hyperbranched Oligomers to Nanocrystal-Based Materials

Plastics materials are a vital component of modern technologies. They are applied, e.g., in construction, transportation, communication, water supply, or health care. Consequently, polyolefins-the most important plastics by scale-are produced in vast amounts by catalytic polymerization. Effective and selective as the catalysts used may be, their high sensitivity toward any polar compounds limits these methods to hydrocarbon reaction media and monomers like ethylene and propylene, respectively. This can be overcome by less oxophilic late transition metal catalysts, and here particularly neutral nickel(II) catalysts have seen major advances in the past few years. They stand out due to being capable of aqueous catalytic polymerizations. Aqueous polymerizations are benign processes that advantageously yield polymers in the form of particles. Moreover, these catalysts can incorporate polar monomers like acrylates, a realm previously restricted to noble metal catalysts. The introduction of polar moieties can induce properties like compatibility with metals or fibers in high performance composite materials or a desirable degradability.This Account provides a personal account of developments in the past decade. Prior findings are outlined briefly as a background. Aqueous polymerizations afford unique polyethylene morphologies as a result of the unusual underlying particle growth mechanism. Polymer single crystals are formed, which can be composed of a single ultrahigh molecular weight chain. This represents a completely disentangled state of such extremely long polymer chains, which has been long sought-after in order to overcome the difficult processing of high performance ultrahigh molecular weight materials. A key prerequisite for this approach and utilization of these catalysts, in general, is control of polymer branching and molecular weight. This is achieved via remote substituents on the Ni(II)-chelating ligand. Despite their distal position to the active site, weak secondary interactions control whether branching and chain transfer pathways compete very effectively with chain growth or are suppressed entirely. This provides access to hyperbranched oligomers, on the one hand, and enables living polymerizations to strictly linear high molecular weight polymer, on the other hand. Other advanced catalysts provide linear copolymers with in-chain polar monomer repeat units for the first time with non-noble metal active sites. Mechanistic studies further revealed that for copolymerizations with polar vinyl monomers the decisive limiting factor is irreversible termination reactions with neutral Ni(II) catalysts, rather than the well-recognized reversible blocking of coordination sites by the polar functional groups found for other types of catalysts. The mechanistic picture also implies the possibility of free-radical pathways, and their role in the formation of desirable polymer end groups and polymer blends is now being recognized. The area of neutral Ni(II) catalysts has progressed significantly in the entire range from fundamental mechanistic understanding, catalyst performance, and previously inaccessible polymer microstructures, and it is moving forward to materials through unique concepts. The unprecedented ability to incorporate functional groups into linear crystalline polyethylene also provides perspectives for much needed polyolefin materials that will not persist in the natural environment for several decades but that can be degraded by virtue of low levels of functional groups.

Ligand–metal secondary interactions in phosphine–sulfonate palladium and nickel catalyzed ethylene (co)polymerization

Ligand secondary interactions and Lewis acid modulation are simultaneously achieved in palladium and nickel catalyzed ethylene polymerization and copolymerization.

Camphor-based phosphine-carbonyl ligands for Ni catalyzed ethylene oligomerization

Ni and Pd complexes of camphor-based phosphine-carbonyl ligands containing biaryl moiety are designed and synthesized. The Ni complexes can catalyze ethylene oligomerization and generate waxy higher olefins as well as oily lower olefins.