Iron-Catalyzed Homogeneous Hydrosilylation of Ketones and Aldehydes: Advances and Mechanistic Perspective

Photocatalytic Hydrosilylation over Pt@UiO-66-NH2: Enhanced Activity and Polymerization Kinetics

Metal-organic frameworks (MOFs) have shown great research and application value in various types of hydrosilylation reactions. However, studies on photocatalysis-induced hydrosilylation using MOFs are extremely rare. Metal nanoparticles (MNPs)@MOFs are extensively studied for their excellent structural tunability and photocatalytic activity, but there are few reports on their application in photocatalytic hydrosilylation. Here, a novel photocatalyst consisting of platinum (Pt) nanoparticles immobilized in a MOF framework is synthesized and used for photocatalytic hydrosilylation. The effects of various factors on hydrosilylation conversion are investigated, including catalyst concentration, substrate ratio, and irradiation intensity. Furthermore, the photoreactivity of the synthesized Pt catalyst is evaluated in the presence of different concentrations of 2-chlorothixanthone as a photosensitizer. It is noteworthy that the conversion of the reaction increases with increasing catalyst concentration or photosensitizer concentration, whereas increasing the polymethylhydrosiloxane content does not lead to a significant increase in conversion. This study demonstrates the potential of MNPs@MOFs as efficient photocatalysts for photoinduced hydrosilylation reactions and paves the way for future applications in this area.

Recent advances of Cp*Ir complexes for transfer hydrogenation: focus on formic acid/formate as hydrogen donors

Transfer hydrogenation reactions offer synthetically powerful strategies to deliver various hydrogenated compounds with the advantages of efficiency, atom economy, and practicability. On one hand, formic acid/formate function as promising hydrogen sources owing to their readily obtainable, inexpensive, and easy to handle nature. On the other hand, Cp*Ir complexes show high activities in transfer hydrogenation. This review highlights progress achieved for transfer hydrogenation of CO, CC, and CN bonds of a variety of unsaturated substrates, as well as amides focusing on Cp*Ir complexes as catalysts and formic acid/formate as hydrogen sources.

FeII complexes supported by an iminophosphorane ligand: synthesis and reactivity

The synthesis of iron complexes supported by a mixed phosphine-lutidine-iminophosphorane (PPyNP) ligand was carried out. While bidentate κ2-N,N coordination was observed for FeCl2, pincer coordination modes were adopted at cationic iron centers, either through dechlorination of [LFe(PPyNP)Cl2] (1) or direct coordination of PPyNP to Fe(OTf)2. Reaction with tert-butylisocyanide gave access to the diamagnetic octahedral complex [Fe(PPyNP)(CNtBu)3]X2 (X = OTf (4), Cl (4')). Both 1 and 4 were shown to undergo deprotonation of the phosphinomethyl group, but the resulting complexes were not active for the dehydrogenative coupling of hexan-1-ol. The hydrosilylation of acetophenones was catalyzed at room temperature with 1 mol% of a catalyst generated in situ from cationic PPyNP-supported iron triflate complexes and KHBEt3.

Effects of silylene ligands on the performance of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes

In order to study the effects of silylene ligands on the catalytic activity of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes, readily available model catalysts are required. In this contribution, a comparative study of the hydrosilylation of aldehydes and ketones catalyzed by tris(trimethylphosphine) cobalt chloride, CoCl(PMe₃)₃ (1), and bis(silylene) cobalt chloride, Co(LSi:)₂(PMe₃)₂Cl (2, LSi: = {PhC(N^tBu)₂}SiCl), is presented. It was found that both complexes 1 and 2 are good catalysts for the hydrosilylation of aldehydes and ketones under mild conditions. This catalytic system has a broad substrate scope and selectivity for multi-functional substrates. Silylene complex 2 shows higher activity than complex 1, bearing phosphine ligands, for aldehydes, but conversely, for ketones, the activity of complex 1 is higher than that of complex 2. It is worth noting that in the process of mechanistic studies the intermediates (PMe₃)₃Co(H)(Cl)(PhH₂Si) (3) and (LSi:)₂(PMe₃)Co(H)(Cl)(PhH₂Si) (4) were isolated from the stoichiometric reactions of 1 and 2 with phenylsilane, respectively. Further experiments confirmed that complex 3 is a real intermediate. A possible catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by 1 was proposed based on the experimental investigation and literature reports, and this mechanism was further supported by DFT studies. The bis(silylene) complex 4 showed complicated behavior in solution. A series of experiments were designed to study the catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by complex 2. According to the experimental results, the hydrosilylation of aldehydes catalyzed by 1 proceeds via a different mechanism than that of the analogous reaction with complex 2 as the catalyst. In the case of ketones, complex 4 is a real intermediate, indicating that both 1 and 2 catalyze the reaction by the same mechanism. The molecular structures of 3 and 4 were determined by single crystal X-ray diffraction analysis.

Synthesis and catalytic performance of nickel phosphinite pincer complexes in deoxygenative hydroboration of amides

A series of imino-POCN^R, amino-POCN^R2, and bis(phosphinite) POCOP pincer complexes of Ni(II) were prepared and tested in catalytic deoxygenative hydroboration of amides with HBPin to the corresponding amines. In contrast to the deoxygenative hydrosilylation approach, primarily developed for tertiary amides, superior reactivity in Ni-catalyzed deoxygenative hydroboration was demonstrated for secondary carboxamides. The bis(phosphinite) hydride complex (POCOP)NiH proved the most active in these reactions, tolerating potentially reducible functionalities such as internal alkenes, esters, nitriles, heteroaromatic compounds, and tertiary amides. Preferable hydroboration of secondary amides was also demonstrated in the presence of primary amide functionalities. The reactions were conducted at 60-80 °C, representing a rare example of a base-metal catalytic system for selective deoxygenation of secondary amides to the corresponding amines under mild conditions. In contrast to secondary amides, deoxygenative hydroboration of primary amides was demonstrated using an iminophosphinite pre-catalyst (POCN^Dmp)Ni(CH₂TMS) (Dmp = 2,6-Me₂C₆H₃). Deoxygenation reactions were suggested to proceed via a direct C-O bond cleavage mechanism, which is triggered by dehydrogenative N-borylation to access more electrophilic N-borylamides amenable to the addition of HBPin to the carbonyl group.

Tailor-Made Synthesis of Hydrosilanols, Hydrosiloxanes, and Silanediols Catalyzed by di-Silyl Rhodium(III) and Iridium(III) Complexes

Siloxanes and silanols containing Si-H units are important building blocks for the synthesis of functionalized siloxane materials, and their synthesis is a current challenge. Herein, we report the selective synthesis of hydrosilanols, hydrosiloxanes, and silanodiols depending on the nature of the catalysts and the silane used. Two neutral ({MCl[SiMe2(o-C6H4PPh2)]2}; M = Rh, Ir) and two cationic ({M[SiMe2(o-C6H4PPh2)]2(NCMe)}[BArF4]; M = Rh, Ir) have been synthesized and their catalytic behavior toward hydrolysis of secondary silanes has been described. Using the iridium complexes as precatalysts and diphenylsilane as a substrate, the product obtained is diphenylsilanediol. When rhodium complexes are used as precatalysts, it is possible to selectively obtain silanediol, hydrosilanol, and hydrosiloxane depending on the catalysts (neutral or cationic) and the silane substituents.

Notable Catalytic Activity of Transition Metal Thiolate Complexes against Hydrosilylation and Hydroboration of Carbon-Heteroatom Bonds

Chemists tend to use transition metal hydride complexes rather than thiolate complexes to catalyse chemical transformations because the hydride complexes possess diverse catalytic reactivity, although most of them are air/moisture-sensitive and difficult to prepare. By comparing the catalytic performances of pincer ligated group 10 metal thiolate and hydride complexes in catalysing the hydroboration and hydrosilylation of C=O and C=N bonds, we demonstrate in this review that transition metal thiolate complexes are much better catalysts than the corresponding hydride complexes in catalysing this type of reactions. Many hydroboration and hydrosilylation reactions catalysed by pincer ligated group 10 metal hydride complexes can also be catalysed by the corresponding thiolate complexes and the thiolate systems are far more active. Therefore, the applications of transition metal thiolate complexes in the catalytic hydroboration and hydrosilylation of unsaturated carbon-heteroatom bonds deserve special attention in future work.

A 1,2,3-triazole-derived pincer-type mesoionic carbene complex of iron(II): carbonyl elimination and hydrosilylation of aromatic aldehydes via the concerted reaction with hydrosilane and a base

Iron complexes bearing 1,2,3-triazol-5-ylidene were synthesized and applied to the reaction with hydrosilane and homogeneous catalytic hydrosilylation of aromatic ketones and aldehydes. Addition of a free carbene to a solution of Fe(CO)₄Br₂ yielded an octahedral, diamagnetic and cationic iron(II) complex [Fe(1,2,3-triazolylidene)(CO)₂Br]⁺. Pyrolysis of the dicarbonyl complex eliminated the two CO ligands to form a paramagnetic four-coordinate complex. A theoretical study using DFT calculations indicated that the spin state changed from singlet to quintet during ligand elimination. Investigations of the successful hydrosilylation of acetophenone and benzaldehyde derivatives using MIC-iron(II) bromide suggested the importance of the base for efficient conversion in the catalytic process. The bromide-to-hydride exchange reaction, transmetallation, of MIC-iron(II) bromide in the presence of KO^tBu and HSi(OEt)₃ which could occur in the initial process of hydrosilylation was proposed, and supported by a theoretical study.

Recent Advances in Carbon-Based Iron Catalysts for Organic Synthesis

Carbon-based iron catalysts combining the advantages of iron and carbon material are efficient and sustainable catalysts for green organic synthesis. The present review summarizes the recent examples of carbon-based iron catalysts for organic reactions, including reduction, oxidation, tandem and other reactions. In addition, the introduction strategies of iron into carbon materials and the structure and activity relationship (SAR) between these catalysts and organic reactions are also highlighted. Moreover, the challenges and opportunities of organic synthesis over carbon-based iron catalysts have also been addressed. This review will stimulate more systematic and in-depth investigations on carbon-based iron catalysts for exploring sustainable organic chemistry.

Platinum thiolate complexes supported by PBP and POCOP pincer ligands as efficient catalysts for the hydrosilylation of carbonyl compounds

Diphosphino-boryl-based PBP pincer platinum thiolate complexes, [Pt(SR){B(NCH₂P^tBu₂)₂-1,2-C₆H₄}] (R = H, 1a; Ph, 1b), and benzene-based bisphosphinite POCOP pincer platinum thiolate complexes, [Pt(SR)(^tBu₂PO)₂-1,3-C₆H₃] (R = H, 2a; Ph, 2b), were prepared and fully characterized by multinuclear NMR, X-ray crystallography, HRMS and elemental analyses. The application of these complexes in the catalytic hydrosilylation of aldehydes and ketones was investigated. It was found that these platinum thiolate complexes are efficient catalysts for the hydrosilylation of aldehydes and ketones at 65-75 °C. Comparatively, the PBP complexes are more active than the corresponding POCOP complexes. Both phenylsilane and polymethylhydrosiloxane (PMHS) can be used as silyl reagents. The expected alcohols were obtained in good to excellent yields after the basic hydrolysis of the hydrosilylation products and many functional groups were not affected. With turnover frequencies (TOFs) of up to 67 000 h^-1, the present catalytic system represents the most effective platinum catalytic system for the hydrosilylation of carbonyl compounds. The reactions were likely catalysed by the in situ generated platinum hydride species.

Hydroelementation of diynes

This review highlights the hydroelementation reactions of conjugated and separated diynes, which depending on the process conditions, catalytic system, as well as the type of reagents, leads to the formation of various products: enynes, dienes, allenes, polymers, or cyclic compounds. The presence of two triple bonds in the diyne structure makes these compounds important reagents but selective product formation is often difficult owing to problems associated with maintaining appropriate reaction regio- and stereoselectivity. Herein we review this topic to gain knowledge on the reactivity of diynes and to systematise the range of information relating to their use in hydroelementation reactions. The review is divided according to the addition of the E-H (E = Mg, B, Al, Si, Ge, Sn, N, P, O, S, Se, Te) bond to the triple bond(s) in the diyne, as well as to the type of the reagent used, and the product formed. Not only are the hydroelementation reactions comprehensively discussed, but the synthetic potential of the obtained products is also presented. The majority of published research is included within this review, illustrating the potential as well as limitations of these processes, with the intent to showcase the power of these transformations and the obtained products in synthesis and materials chemistry.

Applications of iron pincer complexes in hydrosilylation reactions

Due to its abundance, low cost and low toxicity, the first-row transition metal, iron is widely preferred as a catalyst in organic synthesis. The only drawback of lower selectivity due to high reactivity and low stability of the metal centre is tuned by using pincer ligands of different types. The different iron pincer complexes thus prepared are extensively used in catalyzing different types of organic reactions with great selectivity and functional group tolerance under moderate reaction conditions. In this review, we focus on the applications of iron pincer complexes in hydrosilylation reactions, especially the hydrosilylation of carbonyl derivatives and alkene/alkynes.

Iron pincer complexes are efficient in catalyzing various organic reactions with excellent selectivity and functional group tolerance at moderate reaction conditions. This review focuses on the applications of iron pincer complexes in hydrosilylation reactions.

An Aryl Diimine Cobalt(I) Catalyst for Carbonyl Hydrosilylation

Through the application of a redox-innocent aryl diimine chelate, the discovery and utilization of a cobalt catalyst, (Ph2PPrADI)Co, that exhibits carbonyl hydrosilylation turnover frequencies of up to 330 s–1 is...

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

CpFe(CO)2 anion-catalyzed highly efficient hydrosilylation of ketones and aldehydes

K[CpFe(CO)₂] and [NEt₄][CpFe(CO)₂] enabled highly efficient hydrosilylation of ketones and aldehydes with PhSiH₃ to synthesize tris- and bis(alkoxy)silanes in excellent yields depending on the substituents on the carbonyl compounds. The catalyst represents one of the most efficient and practical iron catalysts for hydrosilylation of carbonyl compounds with a TOF up to 24 540 h^-1.

Recent developments in highly basic N-heterocyclic iminato ligands in actinide chemistry

In the last decade, major conceptual advances in the chemistry of actinide molecules and materials have been made to demonstrate their distinct reactivity profiles as compared to lanthanide and transition metal compounds, but some difficult questions remain concerning the intriguing stability of low-valent actinide complexes, and the importance of the 5f-orbitals in reactivity and bonding. The imidazolin-2-iminato moiety has been extensively used in ligands for the advancement of actinide chemistry owing to its unique capability of stabilizing the reactive and highly electrophilic metal ions by virtue of its strong electron donation and steric tunability. The current review article describes recent developments in the chemistry of light actinide metal ions (thorium and uranium) bearing these N-heterocyclic iminato moieties as supporting ligands. In addition, the effect of ring expansion of the N-heterocycle on the catalytic aptitude of the organoactinides is also described herein. The synthesis and reactivity of actinide complexes bearing N-heterocyclic iminato ligands are presented, and promising apposite applications are also presented. The current review focuses on addressing the catalytic behavior of actinide complexes with oxygen-containing substrates such as in the Tishchenko reaction, hydroelementation processes, and polymerization reactions. Actinide complexes have also found new catalytic applications, as demonstrated by the potent chemoselective carbonyl hydroboration and tandem proton-transfer esterification (TPTE) reaction, featuring coupling between an aldehyde and alcohol.

Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base-Metal Catalysis

We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.

Manganese-Catalyzed Hydroboration of Terminal Olefins and Metal-Dependent Selectivity in Internal Olefin Isomerization-Hydroboration

In the past decade, the use of earth-abundant metals in homogeneous catalysis has flourished. In particular, metals such as cobalt and iron have been used extensively in reductive transformations including hydrogenation, hydroboration, and hydrosilylation. Manganese, on the other hand, has been considerably less explored in these reductive transformations. Here, we report a well-defined manganese complex, [Mn(^iPrBDI)(OTf)₂] (2a; BDI = bipyridinediimine), that is an active precatalyst in the hydroboration of a variety of electronically differentiated alkenes (>20 examples). The hydroboration is specifically selective for terminal alkenes and occurs with exclusive anti-Markovnikov selectivity. In contrast, when using the analogous cobalt complex [Co(^iPrBDI)(OTf)₂] (3a), internal alkenes are hydroborated efficiently, where a sequence of isomerization steps ultimately leads to their hydroboration. The contrasting terminal versus internal alkene selectivity for manganese and cobalt was investigated computationally and is further discussed in the herein-reported study.

Iron-catalyzed oxidative cyclization of olefinic 1,3-dicarbonyls with ketone C(sp3)–H bonds: facile access to 2,3-dihydrofurans

The reaction involves the addition of an α-carbonyl radical to the CC bond of olefinic 1,3-dicarbonyls followed by intramolecular 5-endo-trig cyclization.

Hydrogenation reactions catalyzed by HN(CH2CH2PR2)2-ligated copper complexes

Hydrogenation of aldehydes and ketones can be catalyzed by a PNP-ligated copper hydride that is accessible from the copper borohydride or bromide complex or the copper hydride cluster.

SILP Materials as Effective Catalysts in Selective Monofunctionalization of 1,1,3,3-Tetramethyldisiloxane

Functionalized siloxanes are one of the most important classes of organosilicon compounds, thus the enhancement of current methods of its synthesis is an important issue. Herein, we present the selective and highly effective reaction between 1,1,3,3-tetramethyldisiloxane (TMDSO) and 1-octene (1-oct), using SILP (supported ionic liquid phase) materials containing a rhodium catalyst immobilized in three phosphonium ionic liquids (ILs) differing in the structure of cation. Studies have shown high potential for using SILP materials as catalysts due to their high catalytic activity and selectivity, easy separation process, and the possibility of reusing the catalyst in subsequent reaction cycles without adding a new portion of the catalyst. Using the most active SILP material SiO2/[P66614][NTf2]/[{Rh(μ-OSiMe3)(cod)}2] allows for reuse of the catalyst at least 50 times in an efficient and highly selective monofunctionalization of TMDSO.

Zinc Hydride-Catalyzed Hydrofuntionalization of Ketones

Three new dimeric bis-guanidinate zinc(II) alkyl, halide, and hydride complexes [LZnEt]₂ (1), [LZnI]₂ (2) and [LZnH]₂ (3) were prepared. Compound 3 was successfully employed for the hydrosilylation and hydroboration of a vast number of ketones. The catalytic performance of 3 in the hydroboration of acetophenone exhibits a turnover frequency, reaching up to 5800 h^-1, outperforming that of reported zinc hydride catalysts. Notably, both intra- and intermolecular chemoselective hydrosilylation and hydroboration reactions have been investigated.

An iron variant of the Noyori hydrogenation catalyst for the asymmetric transfer hydrogenation of ketones

We report the design of a new iron catalyst for the asymmetric transfer hydrogenation of ketones. This type of iron catalyst combines the structural characteristics of the Noyori hydrogenation catalyst (an axially chiral 2,2'-bis(phosphino)-1,1'-binaphthyl fragment and the metal-ligand bifunctional motif) and an ene(amido) group that can activate the iron center. After activation by 8 equivalents of potassium tert-butoxide, (S_A,R_P,SS)-7a and (S_A,R_P,SS)-7b are active but nonenantioselective catalysts for the transfer hydrogenation of acetophenone and α,β-unsaturated aldehydes at room temperature in isopropanol. A maximum turnover number of 14480 was observed for (S_A,R_P,SS)-7a in the reduction of acetophenone. The right combination of the stereochemistry of the axially chiral 2,2'-bis(phosphino)-1,1'-binaphthyl group and the carbon-centered chiral amine-imine moiety in (S_A,R_P,RR)-7b' afforded an enantioselective catalyst for the preparation of chiral alcohols with moderate to good yields and a broad functional group tolerance.

Accelerating role of deaggregation agents in lithium-catalysed hydrosilylation of carbonyl compounds

A combined computational and experimental approach demonstrates the accelerating role of deaggregation agents, especially HMPA, in the Li-catalysed hydrosilylation of acetophenone in THF solution under very mild conditions.

Hydrosilylation of Carbonyls Catalyzed by Hydridoborenium Borate Salts: Lewis Acid Activation and Anion Mediated Pathways

The electronically unsaturated three-coordinated hydridoborenium cations [LBH]⁺[HB(C₆F₅)₃]^- (1) and [LBH]⁺[B(C₆F₅)₄]^- (2), supported by a bis(phosphinimino)amide ligand, were found to be excellent catalysts for hydrosilylation of a range of aliphatic and aromatic aldehydes and ketones under mild reaction conditions (L = [{(2,4,6-Me₃C₆H₂N)P(Ph₂)}₂N]). The key steps of the catalytic cycle for hydrosilylation of PhCHO were monitored via in situ multinuclear NMR measurements for catalysts 1 and 2. The combined effect of carbonyl activation via the Lewis acidic hydridoborenium cation and the hydridic nature of the borate counteranion in 1 makes it a more efficient catalyst in comparison to that of carbonyl activation via the predominant Lewis acid activation pathway operating with catalyst 2. The catalytic cycle of 1 showed hydride transfer from the borate moiety [HB(C₆F₅)₃]^- to PhCHO in the first step, forming [PhCH₂-O-B(C₆F₅)₃]^-, which subsequently underwent σ-bond metathesis with Et₃SiH to form the product, PhCH₂-O-SiEt₃. Quantum chemical calculations also support the borate anion mediated mechanism with 1. In contrast, the reaction catalyzed by 2 proceeds predominantly via the Lewis acid activation of the carbonyl group involving [LB(H)←OC(H)Ph]⁺[B(C₆F₅)₄]^- as the transition state and [LBOCH₂Ph]⁺[B(C₆F₅)₄]^- as the intermediate.