Pt/TiH2 Catalyst for Ionic Hydrogenation via Stored Hydrides in the Presence of Gaseous H2

Zn Single-Atom Catalysts Enable the Catalytic Transfer Hydrogenation of α,β-Unsaturated Aldehydes

Highly active nonprecious-metal single-atom catalysts (SACs) toward catalytic transfer hydrogenation (CTH) of α,β-unsaturated aldehydes are of great significance but still are deficient. Herein, we report that Zn-N-C SACs containing Zn-N3 moieties can catalyze the conversion of cinnamaldehyde to cinnamyl alcohol with a conversion of 95.5% and selectivity of 95.4% under a mild temperature and atmospheric pressure, which is the first case of Zn-species-based heterogeneous catalysts for the CTH reaction. Isotopic labeling, in situ FT-IR spectroscopy, and DFT calculations indicate that reactants, coabsorbed at the Zn sites, proceed CTH via a "Meerwein-Ponndorf-Verley" mechanism. DFT calculations also reveal that the high activity over Zn-N3 moieties stems from the suitable adsorption energy and favorable reaction energy of the rate-determining step at the Zn active sites. Our findings demonstrate that Zn-N-C SACs hold extraordinary activity toward CTH reactions and thus provide a promising approach to explore the advanced SACs for high-value-added chemicals.

Highly Selective Hydrogenation of Unsaturated Aldehydes in Aqueous Phase

Chemoselective hydrogenation of carbonyl in unsaturated aldehydes is a significant process in the chemical industry, in which the development of aqueous-phase reaction systems as a substitution to organic ones is challenging. Herein, we report Ir atomic cluster catalysts anchored onto WO3-x nanorods via a reduction treatment at various temperatures (denoted as Ir/WOx-T, T = 200, 300, 400, and 500 °C), which accelerates the chemoselective hydrogenation of carbonyl groups in aqueous solutions. The optimal catalyst Ir/WOx-300 exhibits exceptional activity (TOF value: 1313.7 min-1) and chemoselectivity toward cinnamaldehyde (CAL) hydrogenation to cinnamyl alcohol (COL) (yield: ∼98.0%) in water medium, which is, to the best of our knowledge, the highest level compared with previously reported heterogeneous catalysts in liquid-phase reaction. Ac-HAADF-STEM, XAFS, and XPS verify the formation of interface structure (Irδ+-Ov-W5+ (0 ≤ δ ≤ 4); Ov denotes oxygen vacancy) induced by metal-support interaction and the largest concentration of interfacial Ir (Irδ+) in Ir/WOx-300. In situ studies (Raman, FT-IR), isotopic labeling measurements combined with DFT calculations substantiate that the hydrogenation of the C=O group consists of two pathways: water-mediated hydrogenation (predominant) and direct hydrogenation via H2 dissociation (secondary). In the former case, W5+-Ov site accelerates the activation adsorption of H2O, while Ir0 site facilitates the H-H bond cleavage of H2 and Irδ+ promotes the CAL adsorption. H2O molecule, as the source of hydrogen species, participates directly in the hydrogenation of the carbonyl group through a hydrogen-bonded network, with a largely reduced energy barrier relative to the H2 dissociation path. This work demonstrates a green catalytic route that breaks the activity-selectivity trade-off toward the selective hydrogenation of unsaturated aldehydes, which shows great potential in heterogeneous catalysis.

An interfacial synergism effect of Pd-g-C3N4 in Pd/g-C3N4 for highly active and selective hydrogenation of 4-nitrophenol

Herein, we report that Pd nanoparticles (NPs) anchored on graphitic nitride carbon (Pd/g-C3N4) catalysts with various Pd contents (1.55 wt%, 0.14 wt%, 0.04 wt%) are successfully prepared via a simple NaBH4 reduction method, exhibiting excellent catalytic activity and selectivity toward 4-aminophenol (4-AP) in 4-nitrophenol (4-NP) selective hydrogenation. 4-NP is completely converted to 4-AP (yield ∼ 100%) under quite moderate reaction conditions (40 °C, 2.0 MPa H2 and 5 min) over the 1.55 wt% Pd/g-C3N4 catalyst, with a high reaction rate r = 134.4 mol4-NP molPd-1 min-1. The excellent catalytic performance can be attributed to the following reasons: (1) a higher ratio of Pd(0)/Pdn+ provides much more exposed active sites for the potential adsorption and activation of the reactants, which is beneficial for increasing the reaction rate and catalytic activity; (2) Pd NPs are highly dispersed on g-C3N4 due to the strong interaction of Pd-N or Pd-C; (3) the interfacial synergism effect between Pd NPs and g-C3N4 enables the effective adsorption and activation of H2 (4-NP) at Pd (g-C3N4), promoting the catalytic hydrogenation of 4-NP and improving their catalytic properties. In addition, this catalyst has superior reusability.

Microenvironment engineering of supported metal nanoparticles for chemoselective hydrogenation

Selective hydrogenation with supported metal catalysts widely used in the production of fine chemicals and pharmaceuticals often faces a trade-off between activity and selectivity, mainly due to the inability to adjust one factor of the active sites without affecting other factors. In order to solve this bottleneck problem, the modulation of the microenvironment of active sites has attracted more and more attention, inspired by the collaborative catalytic mode of enzymes. In this perspective, we aim to summarize recent advances in the regulation of the microenvironment surrounding supported metal nanoparticles (NPs) using porous materials enriched with organic functional groups. Insights on how the microenvironment induces the enrichment, oriented adsorption and activation of substrates through non-covalent interaction and thus determines the hydrogenation activity and selectivity will be particularly discussed. Finally, a brief summary will be provided, and challenges together with a perspective in microenvironment engineering will be proposed.

Inert metal induces the modulation of unsaturated aldehyde absorption mode for enhanced selective hydrogenation

Selective hydrogenation of α,β-unsaturated aldehydes to obtain a high yield of unsaturated alcohols is important in industrial production. This is still a great challenge because it is thermally more favorable for the hydrogenation of CC than for the CO bond. Various strategies have been developed to optimize the catalysts for improving selectivity but are usually accompanied by the sacrifice of catalytic activity. Herein, we adopt the inert metal inducement strategy to synthesize a series of Ir-M alloy nanoparticle catalysts. The optimal catalyst IrCd₅ exhibits impressive catalytic performance in the selective hydrogenation of cinnamaldehyde, achieving 96.7% conversion with 94.3% selectivity for cinnamal alcohol, which is far superior to that of the Ir counterpart. Furthermore, the H₂ temperature-programmed desorption (H₂-TPD) test, styrene-TPD test, surface valence band test and density functional theory calculations demonstrate that the adsorption mode of cinnamaldehyde shifted from parallel to vertical configurations after introducing an inert metal. Compared to Ir, the weaker adsorption of alkene and stronger adsorption of the substrate for IrCd₅ lead to the prior adsorption and hydrogenation of the CO bond, thus elevating the selectivity of the cinnamal alcohol. This strategy disperses precious metal nanoparticles effectively, maximizes atomic utilization, and improves the selectivity, which provides a new avenue to design bimetal alloy catalysts for the selective hydrogenation of α,β-unsaturated aldehydes.

Facilitating Hydrogen Dissociation over Dilute Nanoporous Ti-Cu Catalysts

The dissociation of H₂ is an essential elementary step in many industrial chemical transformations, typically requiring precious metals. Here, we report a hierarchical nanoporous Cu catalyst doped with small amounts of Ti (npTiCu) that increases the rate of H₂-D₂ exchange by approximately one order of magnitude compared to the undoped nanoporous Cu (npCu) catalyst. The promotional effect of Ti was measured via steady-state H₂-D₂ exchange reaction experiments under atmospheric pressure flow conditions in the temperature range of 300-573 K. Pretreatment with flowing H₂ is required for stable catalytic performance, and two temperatures, 523 and 673 K, were investigated. The experimentally determined H₂-D₂ exchange rate is 5-7 times greater for npTiCu vs the undoped Cu material under optimized pretreatment and reaction temperatures. The H₂ pretreatment leads to full reduction of Cu oxide and partial reduction of surface Ti oxide species present in the as-prepared catalyst as demonstrated using in situ ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. The apparent activation energies and pre-exponential factors measured for H₂-D₂ exchange are substantially different for Ti-doped vs undoped npCu catalysts. Density functional theory calculations suggest that isolated, metallic Ti atoms on the surface of the Cu host can act as the active surface sites for hydrogen recombination. The increase in the rate of exchange above that of pure Cu is caused primarily by a shift in the rate-determining step from dissociative adsorption on Cu to H/D atom recombination on Ti-doped Cu, with the corresponding decrease in activation entropy that it produces.

New black indium oxide—tandem photothermal CO2-H2 methanol selective catalyst

It has long been known that the thermal catalyst Cu/ZnO/Al₂O₃(CZA) can enable remarkable catalytic performance towards CO₂ hydrogenation for the reverse water-gas shift (RWGS) and methanol synthesis reactions. However, owing to the direct competition between these reactions, high pressure and high hydrogen concentration (≥75%) are required to shift the thermodynamic equilibrium towards methanol synthesis. Herein, a new black indium oxide with photothermal catalytic activity is successfully prepared, and it facilitates a tandem synthesis of methanol at a low hydrogen concentration (50%) and ambient pressure by directly using by-product CO as feedstock. The methanol selectivities achieve 33.24% and 49.23% at low and high hydrogen concentrations, respectively.

Harsh reaction conditions are generally required for CO2 hydrogenation to shift the thermodynamic equilibrium towards methanol synthesis. Here, a new black indium oxide with two types of active sites, frustrated Lewis pairs and oxygen vacancies, is prepared, and facilitates a tandem synthesis of methanol at a low hydrogen concentration (50%) and ambient pressure.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

Defect engineering and spilt-over hydrogen in Pt/(WO3–TH2) for selective hydrogenation of CO bonds

The effect of defects in pre-treatment WOx on the catalytic performance of selective hydrogenation of cinnamaldehyde to cinnamyl alcohol has been revealed.

PtMn/PtCo alloy nanofascicles: robust electrocatalysts for electrocatalytic hydrogen evolution reaction under both acidic and alkaline conditions

Herein, PtMn and PtCo nanofascicles were prepared by ultrathin nanofibers using a versatile method, and can be employed as effective electrocatalysts toward the HER under both acidic and alkaline conditions.

Insight into the effects of electronegativity on the H2 catalytic activation for CO2 hydrogenation: four transition metal cases from a DFT study

Electronegativity of transition metal dominates the type of H species, which has an important effect on the path choice of CO₂ hydrogenation.