Selective 2-Propanol Oxidation over Unsupported Co3O4 Spinel Nanoparticles: Mechanistic Insights into Aerobic Oxidation of Alcohols

Co3O4 (111) surfaces in contact with water: molecular dynamics study of the surface chemistry and structure at room temperature

In this work, we have used ab initio molecular dynamics at room temperature to study the adsorption and dissociation of a thin water film on Co3O4 (111) surfaces, considering the O-rich and Co-rich terminations named as the A-type and B-type surface terminations, respectively. We investigate the occupation of active sites, the hydrogen bond network at the interface and the structural response of the surfaces to water adsorption. On both terminations, water adsorbs via a partial dissociative mode. The contact layer is populated by molecular water as well as OH groups and surface OH resulting from proton transfer to the surface. The B-termination is more reactive, with a higher degree of dissociation in the contact layer with water (46%). On the B-terminated surface, water barely adsorbs on the Co2+ sites and almost exclusively binds and dissociates on the Co3+ sites. The interaction with the surface consists mostly of Co3+-Ow bonds and proton transfer exclusively to the 3-fold unsaturated surface Os1. Hydrogen bonds between water molecules in the aqueous film dominate the hydrogen bond network and no hydrogen bonds between water and the surface are observed. The A-terminated surface is less reactive. Water binds covalently on Co2+ sites, with a dissociation degree of 13%. Proton transfer occurs mostly on the 3-fold unsaturated surface oxygens Os1. Besides, short-lived surface OH arising from proton transfer to 3-fold unsaturated surface oxygens Os2 is observed. H-bonding to surface Os1 and Os2 constitutes 12.7% and 19.8% of the H-bond network, respectively, and the largest contribution is found among the water molecules (67.4%). On both surfaces, the coordination number of the active sites drives the relaxations of the outermost atom positions to the their bulk counterparts. The occupation of active sites on B-termination could reach up to 3 adsorbates per Co3+ leading to a binding motif in which the Co is octahedrally coordinated and which was observed experimentally.

Restricted Open-Shell Hartree-Fock Method for a General Configuration State Function Featuring Arbitrarily Complex Spin-Couplings

In this work, we present a general spin restricted open-shell Hartree-Fock (ROHF) implementation that is able to generate self-consistent field (SCF) wave functions for an arbitrary configuration state function (CSF). These CSFs can contain an arbitrary number of unpaired electrons in arbitrary spin-couplings. The resulting method is named CSF-ROHF. We demonstrate that starting from the ROHF energy expression, for example, the one given by Edwards and Zerner, it is possible to obtain the values of the ROHF vector-coupling coefficients by setting up an open-shell for each group of consecutive parallel-coupled spins dictated by the unique spin-coupling pattern of any given CSF. To achieve this important and nontrivial goal, we employ the machinery of the iterative configuration expansion configuration interaction (ICE-CI) method, which is able to tackle general CI problems on the basis of spin-adapted CSFs. This development allows for the efficient generation of SCF spin-eigenfunctions for systems with complex spin-coupling patterns, such as polymetallic chains and metal clusters, while maintaining SCF scaling with system size (quadratic or less, depending on the specific algorithm and approximations chosen).

Cyclohexane Oxidative Dehydrogenation on Graphene-Oxide-Supported Cobalt Ferrite Nanohybrids: Effect of Dynamic Nature of Active Sites on Reaction Selectivity

In this work, we investigated cyclohexane oxidative dehydrogenation (ODH) catalyzed by cobalt ferrite nanoparticles supported on reduced graphene oxide (RGO). We aim to identify the active sites that are specifically responsible for full and partial dehydrogenation using advanced spectroscopic techniques such as X-ray photoelectron emission microscopy (XPEEM) and X-ray photoelectron spectroscopy (XPS) along with kinetic analysis. Spectroscopically, we propose that Fe3+/Td sites could exclusively produce benzene through full cyclohexane dehydrogenation, while kinetic analysis shows that oxygen-derived species (O*) are responsible for partial dehydrogenation to form cyclohexene in a single catalytic sojourn. We unravel the dynamic cooperativity between octahedral and tetrahedral sites and the unique role of the support in masking undesired active (Fe3+/Td) sites. This phenomenon was strategically used to control the abundance of these species on the catalyst surface by varying the particle size and the wt % content of the nanoparticles on the RGO support in order to control the reaction selectivity without compromising reaction rates which are otherwise extremely challenging due to the much favorable thermodynamics for complete dehydrogenation and complete combustion under oxidative conditions.

Highly Selective Activation of C-H Bond and Inhibition of C-C Bond Cleavage by Tuning Strong Oxidative Pd Sites

Improving the product selectivity meanwhile restraining deep oxidation still remains a great challenge over the supported Pd-based catalysts. Herein, we demonstrate a universal strategy where the surface strong oxidative Pd sites are partially covered by the transition metal (e. g., Cu, Co, Ni, and Mn) oxide through thermal treatment of alloys. It could effectively inhibit the deep oxidation of isopropanol and achieve the ultrahigh selectivity (>98%) to the target product acetone in a wide temperature range of 50-200 °C, even at 150-200 °C with almost 100% isopropanol conversion over PdCu_1.2/Al₂O₃, while an obvious decline in acetone selectivity is observed from 150 °C over Pd/Al₂O₃. Furthermore, it greatly improves the low-temperature catalytic activity (acetone formation rate at 110 °C over PdCu_1.2/Al₂O₃, 34.1 times higher than that over Pd/Al₂O₃). The decrease of surface Pd site exposure weakens the cleavage for the C-C bond, while the introduction of proper CuO shifts the d-band center (ε_d) of Pd upward and strengthens the adsorption and activation of reactants, providing more reactive oxygen species, especially the key super oxygen species (O₂^-) for selective oxidation, and significantly reducing the barrier of O-H and β-C-H bond scission. The molecular-level understanding of the C-H and C-C bond scission mechanism will guide the regulation of strong oxidative noble metal sites with relatively inert metal oxide for the other selective catalytic oxidation reactions.

Oxygen Vacancy Promoted O2 Activation over Mesoporous Ni-Co Mixed Oxides for Aromatic Hydrocarbon Oxidation

Whether the oxygen vacancies of heterogeneous catalysts improve their catalytic activity or not has recently been the topic of intense debate in the oxidation of hydrocarbons. We designed an effective strategy to construct mesoporous Ni-Co mixed oxides via a ligand-assisted self-assembly approach. The surface oxygen vacancy concentrations of the mesoporous Ni-Co mixed oxide catalysts were regulated by changing the doping amount of Ni or the reduction method, and the relationship between oxygen vacancies and catalytic activity was studied. Controlled experiments and DFT calculations revealed that oxygen molecules were more favorably adsorbed and activated on oxygen vacancies to form active oxygen species. Increasing the oxygen vacancy concentration within a certain range can effectively enrich the active oxygen species, therefore improving the oxidation rate of ethylbenzene. The optimized mCo₃O₄-0.1NiO catalyst exhibited a remarkable catalytic activity for the solvent-free oxidation of ethylbenzene to acetophenone, typically including 68.0% conversion and 95.4% selectivity (20 mg mCo₃O₄-0.1NiO, 10 mL ethylbenzene, and 0.6 MPa O₂).

Interfacial Evolution on Co-based Oxygen Evolution Reaction Electrocatalysts Probed by Using In Situ Surface-Enhanced Raman Spectroscopy

Disclosing the roles of reactive sites at catalytic interfaces is of paramount importance for understanding the reaction mechanism. However, due to the difficulties in the detection of reaction intermediates in the complex heterophase reaction system, disentangling the highly convolved roles of different surface atoms remains challenging. Herein, we used CoO_x as a model catalyst to study the synergy of Co_Td²⁺ and Co_Oh³⁺ active sites in the electrocatalytic oxygen evolution reaction (OER). The formation and evolution of reaction intermediates on the catalyst surface during the OER process were investigated by in situ surface-enhanced Raman spectroscopy (SERS). According to the SERS results in ion-substitution experiments, Co_Oh³⁺ is the catalytic site for the conversion of OH^- to O-O^- intermediate species (1140-1180 cm^-1). CoOOH (503 cm^-1) and CoO₂ (560 cm^-1) active centers generated during the OER, at the original Co_Td²⁺ sites of CoO_x, eventually serve as the O₂ release sites (conversion of O-O^- intermediate to O₂). The mechanism was further confirmed on Co²⁺-Co³⁺ layered double hydroxides (LDHs), where an optimal ratio of 1:1.2 (Co²⁺/Co³⁺) is required to balance O-O^- generation and O₂ release. This work highlights the synergistic role of metal atoms at different valence statuses in water oxidation and sheds light on surface component engineering for the rational design of high-performance heterogeneous catalysts.

Interactions of water and short-chain alcohols with CoFe2O4(001) surfaces at low coverages

Iron and cobalt-based oxides crystallizing in the spinel structure are efficient and affordable catalysts for the oxidation of organics, yet, the detailed understanding of their surface structure and reactivity is limited. To fill this gap, we have investigated the (001) surfaces of cobalt ferrite, CoFe₂O₄, with the A- and B-layer terminations using density functional theory (DFT/PBE0) and an embedded cluster model. We have considered the five-fold coordinated Co^2+/3+ (O_h), two-fold coordinated Fe²⁺ (T_d), and an oxygen vacancy, as active sites for the adsorption of water and short-chain alcohols: methanol, ethanol, and 2-propanol, in the low coverage regime. The adsorbates dissociate upon adsorption on the Fe sites whereas the adsorption is mainly molecular on Co. At oxygen vacancies, the adsorbates always dissociate, fill the vacancy and form (partially) hydroxylated surfaces. The computed vibrational spectra for the most stable configurations are compared with results from diffuse reflectance infrared Fourier transform spectroscopy.

Synergy in Au-CuO Janus Structure for Catalytic Isopropanol Oxidative Dehydrogenation to Acetone

The controlled oxidation of alcohols to the corresponding ketones or aldehydes via selective cleavage of the β-C-H bond of alcohols under mild conditions still remains a significant challenge. Although the metal/oxide interface is highly active and selective, the interfacial sites fall far behind the demand, due to the large and thick support. Herein, we successfully develop a unique Au-CuO Janus structure (average particle size=3.8 nm) with an ultrathin CuO layer (0.5 nm thickness) via a bimetal in situ activation and separation strategy. The resulting Au-CuO interfacial sites prominently enhance isopropanol adsorption and decrease the energy barrier of β-C-H bond scission from 1.44 to 0.01 eV due to the strong affinity between the O atom of CuO and the H atom of isopropanol, compared with Au sites alone, thereby achieving ultrahigh acetone selectivity (99.3 %) over 1.1 wt % AuCu_0.75 /Al₂ O₃ at 100 °C and atmospheric pressure with 97.5 % isopropanol conversion. Furthermore, Au-CuO Janus structures supported on SiO₂ , TiO₂ or CeO₂ exhibit remarkable catalytic performance, and great promotion in activity and acetone selectivity is achieved as well for other reducible oxides derived from Fe, Co, Ni and Mn. This study should help to develop strategies for maximized interfacial site construction and structure optimization for efficient β-C-H bond activation.

Active sites and deactivation of room temperature CO oxidation on Co3O4catalysts: combined experimental and computational investigations

Co₃O₄is a well-known low temperature CO oxidation catalyst, but it often suffers from deactivation. We have thus examined room temperature (RT) CO oxidation on Co₃O₄catalysts by operando DSC, TGA and MS measurements, as well as by pulsed chemisorption to differentiate the contributions of CO adsorption and reaction to CO₂. Catalysts pretreated in oxygen at 400 °C are most active, with the initial interaction of CO and Co₃O₄being strongly exothermic and with maximum amounts of CO adsorption and reaction. The initially high RT activity then levels-off, suggesting that the oxidative pretreatment creates an oxygen-rich reactive Co₃O₄surface that upon reaction onset loses its most active oxygen. This specific active oxygen is not reestablished by gas phase O₂during the RT reaction. When the reaction temperature is increased to 150 °C, full conversion can be maintained for 100 h, and even after cooling back to RT. Apparently, deactivating species are avoided this way, whereas exposing the active surface even briefly to pure CO leads to immediate deactivation. Computational modeling using DFT helped to identify the CO adsorption sites, determine oxygen vacancy formation energies and the origin of deactivation. A new species of CO bonded to oxygen vacancies at RT was identified, which may block a vacancy site from further reaction unless CO is removed at higher temperature. The interaction between oxygen vacancies was found to be small, so that in the active state several lattice oxygen species are available for reaction in parallel.

Monitoring Catalytic 2-Propanol Oxidation over Co3O4 Nanowires via In Situ Photoluminescence Spectroscopy

Spectroscopic methods enabling real-time monitoring of dynamic surface processes are a prerequisite for identifying how a catalyst triggers a chemical reaction. We present an in situ photoluminescence spectroscopy approach for probing the thermocatalytic 2-propanol oxidation over mesostructured Co₃O₄ nanowires. Under oxidative conditions, a distinct blue emission at ∼420 nm is detected that increases with temperature up to 280 °C, with an intermediate maximum at 150 °C. Catalytic data gained under comparable conditions show that this course of photoluminescence intensity precisely follows the conversion of 2-propanol and the production of acetone. The blue emission is assigned to the radiative recombination of unbound acetone molecules, the n ↔ π* transition of which is selectively excited by a wavelength of 270 nm. These findings open a pathway for studying thermocatalytic processes via in situ photoluminescence spectroscopy, thereby gaining information about the performance of the catalyst and the formation of intermediate products.

X-ray Absorption Near-Edge Structure (XANES) at the O K-Edge of Bulk Co3O4: Experimental and Theoretical Studies

We combine theoretical and experimental X-ray absorption near-edge spectroscopy (XANES) to probe the local environment around cationic sites of bulk spinel cobalt tetraoxide (Co3O4). Specifically, we analyse the oxygen K-edge spectrum. We find an excellent agreement between our calculated spectra based on the density functional theory and the projector augmented wave method, previous calculations as well as with the experiment. The oxygen K-edge spectrum shows a strong pre-edge peak which can be ascribed to dipole transitions from O 1s to O 2p states hybridized with the unoccupied 3d states of cobalt atoms. Also, since Co3O4 contains two types of Co atoms, i.e., Co3+ and Co2+, we find that contribution of Co2+ ions to the pre-edge peak is solely due to single spin-polarized t2g orbitals (dxz, dyz, and dxy) while that of Co3+ ions is due to spin-up and spin-down polarized eg orbitals (dx2−y2 and dz2). Furthermore, we deduce the magnetic moments on the Co3+ and Co2+ to be zero and 3.00 μB respectively. This is consistent with an earlier experimental study which found that the magnetic structure of Co3O4 consists of antiferromagnetically ordered Co2+ spins, each of which is surrounded by four nearest neighbours of oppositely directed spins.

Recent progress in single-atom alloys: Synthesis, properties, and applications in environmental catalysis

Heterogeneous catalysts have made outstanding advancements in pollutants elimination as well as energy and materials production over the past decades. Single-atom alloys (SAAs) are novel environmental catalysts prepared by dispersing single metal atoms on other metals. Integrating the advantages of single atom and alloys, SAAs can maximize atom utilization, reduce the use of noble metals and enhance catalytic performances. The synergistic, electronic and geometric effects of SAAs are effective to modulate the activation energy and adsorption strength, consequently breaking linear scaling relationship as well as offering an excellent catalytic activity and selectivity. Moreover, SAAs possess clear atomic structure, active sites and reaction mechanisms, providing an opportunity to tailor catalytic properties and develop effective environmental catalysts. In this review, we provide the recent progress on synthetic strategies, catalytic properties and catalyst design of SAAs. Furthermore, the applications of SAAs in environmental catalysis are introduced towards catalytic conversion and elimination of different air pollutants in many important reactions including (electrochemical) oxidation of volatile organic compounds (VOCs), dehydrogenation of VOCs, CO₂ conversion, NO_x reduction, CO oxidation, SO₃ decomposition, etc. Finally, challenges and opportunities of SAAs in a broad environmental field are proposed.

The Effect of Water on the 2-Propanol Oxidation Activity of Co-Substituted LaFe1- Cox O3 Perovskites

Perovskites are interesting oxidation catalysts due to their chemical flexibility enabling the tuning of several properties. In this work, we synthesized LaFe1-x Cox O3 catalysts by co-precipitation and thermal decomposition, characterized them thoroughly and studied their 2-propanol oxidation activity under dry and wet conditions to bridge the knowledge gap between gas and liquid phase reactions. Transient tests showed a highly active, unstable low-temperature (LT) reaction channel in conversion profiles and a stable, less-active high-temperature (HT) channel. Cobalt incorporation had a positive effect on the activity. The effect of water was negative on the LT channel, whereas the HT channel activity was boosted for x>0.15. The boost may originate from a slower deactivation rate of the Co3+ sites under wet conditions and a higher amount of hydroxide species on the surface comparing wet to dry feeds. Water addition resulted in a slower deactivation for Co-rich catalysts and higher activity in the HT channel state.

Activation of Molecular O2 on CoFe2 O4 (001) Surfaces: An Embedded Cluster Study

Dioxygen activation pathways on the (001) surfaces of cobalt ferrite, CoFe2 O4 , were investigated computationally using density functional theory and the hybrid Perdew-Burke-Ernzerhof exchange-correlation functional (PBE0) within the periodic electrostatic embedded cluster model. We considered two terminations: the A-layer exposing Fe2+ and Co2+ metal sites in tetrahedral and octahedral positions, respectively, and the B-layer exposing octahedrally coordinated Co3+ . On the A-layer, molecular oxygen is chemisorbed as a superoxide on the Fe monocenter or bridging a Fe-Co cation pair, whereas on the B-layer it is adsorbed at the most stable anionic vacancy. Activation is promoted by transfer of electrons provided by the d metal centers onto the adsorbed oxygen. The subsequent dissociation of dioxygen into monoatomic species and surface reoxidation have been identified as the most critical steps that may limit the rate of the oxidation processes. Of the reactive metal-O species, [FeIII -O]2+ is thermodynamically most stable, while the oxygen of the Co-O species may easily migrate across the A-layer with barriers smaller than the associative desorption.

A Perspective on Heterogeneous Catalysts for the Selective Oxidation of Alcohols

Selective oxidation of higher alcohols using heterogeneous catalysts is an important reaction in the synthesis of fine chemicals with added value. Though the process for primary alcohol oxidation is industrially established, there is still a lack of fundamental understanding considering the complexity of the catalysts and their dynamics under reaction conditions, especially when higher alcohols and liquid-phase reaction media are involved. Additionally, new materials should be developed offering higher activity, selectivity, and stability. This can be achieved by unraveling the structure-performance correlations of these catalysts under reaction conditions. In this regard, researchers are encouraged to develop more advanced characterization techniques to address the complex interplay between the solid surface, the dissolved reactants, and the solvent. In this mini-review, we report some of the most important approaches taken in the field and give a perspective on how to tackle the complex challenges for different approaches in alcohol oxidation while providing insight into the remaining challenges.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles

La_1−xSr_xCoO₃ (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray‐flame synthesis and applied in the liquid‐phase oxidation of cyclohexene with molecular O₂ as oxidant under mild conditions. The catalysts were systematically characterized by state‐of‐the‐art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co²⁺ was also increased. However, Co²⁺ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first‐order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol⁻¹ for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O₂ pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex‐2‐ene‐1‐hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

Recycling electroplating sludge as a monolithic catalyst for effective catalytic purification of volatile organic compounds

Electroplating sludge had a high content of heavy metals and usually lacked high-value-added utilization. In this work, Cu-containing sludge was used to synthesize a spinel catalyst, which was applied in catalytic oxidization of toluene. As a result, the sludge-derived spinel removed 50% of toluene (1000 ppm, 9600 h^-1) at 280 °C. In comparison, a reagent-synthesized spinel with a similar component removed 50% of pollutant at 294 °C. The sludge-derived spinel also showed a stable performance for over 50 h at 370 °C. Even when the initial concentration was increased to 5000 ppm, or the gas hourly space velocity was increased to 40,000 h^-1, the temperature for 50% removal was only increased to 303 °C. According to characterizations, surface oxygens of the sludge-derived spinel were more active than those in the reagent-synthesized one. Besides, the former had more active surface oxygens (207.9 μmol/g) than the latter (183.1 μmol/g). Furthermore, the sludge-derived spinel was coated on a monolithic honeycomb, which were also effective in catalytic oxidization of toluene. The main results of this work were in favor of high-value-added utilization of hazardous solid waste and promoting its real industry application.

Dynamics of Reactive Oxygen Species on Cobalt-Containing Spinel Oxides in Cyclic CO Oxidation

Reactive oxygen species (ROS) are considered to be responsible for the high catalytic activity of transition metal oxides like Co3-xFexO4 in oxidation reactions, but the detailed influences of catalyst composition and morphology on the formation of these reactive oxygen species are not fully understood. In the presented study, Co3O4 spinels of different mesostructures, i.e., particle size, crystallinity, and specific surface area, are characterized by powder X-ray diffraction, scanning electron microscopy, and physisorption. The materials were tested in CO oxidation performed in consecutive runs and compared to a Co3-xFexO4 composition series with a similar mesostructure to study the effects of catalyst morphology and composition on ROS formation. In the first run, the CO conversion was observed to be dominated by the exposed surface area for the pure Co-spinels, while a negative effect of Fe content in the spinels was seen. In the following oxidation run, a U-shaped conversion curve was observed for materials with high surface area, which indicated the in situ formation of ROS on those materials that were responsible for the new activity at low temperature. This activation was not stable at the higher reaction temperature but was confirmed after temperature-programmed oxidation (TPO). However, no activation after the first run was observed for low-surface-area and highly crystalline materials, and the lowest surface-area material was not even activated after TPO. Among the catalyst series studied here, a correlation of small particle size and large surface area with the ability for ROS formation is presented, and the benefit of a nanoscaled catalyst is discussed. Despite the generally negative effect of Fe, the highest relative activation was observed at intermediate Fe contents suggesting that Fe may be involved in ROS formation.

Novel cryptomelane nanosheets for the superior catalytic combustion of oxygenated volatile organic compounds

This work offers a novel pathway to prepare cryptomelane manganese oxides nanosheets as an superior catalyst for the catalytic combustion of oxygenated volatile organic compounds. The tunnel cryptomelane manganese oxides nanosheets were prepared from layered birnessite via simultaneously tuning pH and molar ratio (R_OK) of the redox-precipitation between oxalic acid and KMnO₄. Thus, few-layered cryptomelane nanosheets possessing the most predominantly exposed (211) facet are generated at low pH (5.2-5.6), which intensifies the surface area of thin crystal cryptomelane nanosheets up to 177 m²g^-1 and weakens Mn-O bonds. Moreover, high R_OK results in low manganese average oxidation state (AOS), greater oxygen vacancies and better low-temperature reduction and oxygen mobility. Such features significantly maneuver the catalytic activity of the cryptomelane nanosheets catalysts for the complete oxidation of oxygenated volatile organic compound (e.g., 2-propanol, acetone) at low temperature (170-230 °C). Moreover, the catalysts show high stability for 48 h. The presented catalyst discloses an avenue to address current obstacles in the catalytic oxidation of volatile organic compounds.

Surface oxygen Vacancies on Reduced Co3 O4 (100): Superoxide Formation and Ultra-Low-Temperature CO Oxidation

The activation of molecular oxygen is a fundamental step in almost all catalytic oxidation reactions. We have studied this topic and the role of surface vacancies for Co₃ O₄ (100) films with a synergistic combination of experimental and theoretical methods. We show that the as-prepared surface is B-layer terminated and that mild reduction produces oxygen single and double vacancies in this layer. Oxygen adsorption experiments clearly reveal different superoxide species below room temperature. The superoxide desorbs below ca. 120 K from a vacancy-free surface and is not active for CO oxidation while superoxide on a surface with oxygen vacancies is stable up to ca. 270 K and can oxidize CO already at the low temperature of 120 K. The vacancies are not refilled by oxygen from the superoxide, which makes them suitable for long-term operation. Our joint experimental/theoretical effort highlights the relevance of surface vacancies in catalytic oxidation reactions.

Influence of the particle size on selective 2-propanol gas-phase oxidation over Co3O4 nanospheres

Co3O4 nanospheres with a preferential (110) surface orientation showed excellent catalytic properties in the selective gas-phase oxidation of 2-propanol. A preferential Mars–van Krevelen mechanism on the Co3O4(110) surface was identified by DFT + U.

Tuning selectivity in nickel oxide-catalyzed oxidative dehydrogenation of ethane through control over non-stoichiometric oxygen density

Thermally stable nickel oxide cubes are used to vary, exclusively, bulk non-stoichimetric oxygen density, and to rationalize ethene selectivities in the oxidative dehydorgenation of ethane under a wide range of conditions.

Direct Oxidative Azo Coupling of Anilines Using a Self-Assembled Flower-like CuCo2O4 Material as a Catalyst under Aerobic Conditions

Herein, we report the synthesis of a self-assembled flower-like CuCo₂O₄ material by the oxalate decomposition method. The crystalline structure and morphology of the material have been analyzed by powder X-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray measurement techniques. The self-assembled flower-like CuCo₂O₄ material showed remarkable catalytic activity in the direct aerobic oxidative azo coupling of anilines under oxidant and other additive-free reaction conditions. The mechanistic insight of CuCo₂O₄ in the oxidative azo coupling reaction has been established by density functional theory calculations, which disclosed that the absorption and dissociation of areal oxygen preferentially take place at the Cu site and dissociation of aniline takes place at the Co site. Thus, the Cu and Co sites of CuCo₂O₄ exert a cooperative effect on the direct oxidative azo coupling reactions through the selective activation of anilines and aerobic oxygen. The CuCo₂O₄ material was recovered from the reaction mixture and reused for at least eight runs without appreciable loss of catalytic activity.

Enhanced light-driven photothermocatalytic activity on selectively dissolved LaTi1-xMnxO3+δ perovskites by photoactivation

LaTi_1-xMn_xO_3+δ (x = 0.2 and 0.4) perovskite-type catalysts are synthesized by acrylamide polymerization route and etched with diluted HNO₃ for oxidation of toluene as one of typical volatile organic compounds (VOCs). The substitution of Mn cations improves catalytic activity (toluene conversion increased from 0 to 50.6% by substituting 40% of Ti cations with Mn cations) by improving abilities of light absorption and light-to-heat conversion, and acid etching further promotes catalytic activity (toluene conversion increased from 50.6%-95.6% for LaTi_0.6Mn_0.4O_3+δ) by enlarging specific surface area, generating more surface active oxygen, strengthening mobility of surface oxygen, and improving low-temperature reducibility. To explore the origin of the light-driven photothermocatalytic activity of A-LaTi_0.6Mn_0.4O_3+δ by EPR analysis, O₂ desorption and H₂ consumption, we find that the light is not only as a thermal source to provide energy for toluene oxidation but also can promote oxidation reaction by photoactivation.