Breaking C–O Bonds with Uranium: Uranyl Complexes as Selective Catalysts in the Hydrosilylation of Aldehydes

P(V)-bis(amidophenolate) ligand cooperation: stoichiometric CO-bond cleavage in aldehydes and ketones

The cooperation between a geometrically constrained, highly electrophilic phosphorus(V) center, and an electronically rich tetradentate bis(amidophenolate) ligand enables the cleavage of the CO bond from typical aldehydes and ketones delivering iminio phosphoramidate species. The amphiphilic nature of these products, which is demonstrated through their reaction with typical Lewis acids and bases, enables their use as a mild source of silylium cations from silanes, allowing the selective reductive coupling of aldehydes to ethers under catalytic conditions.

Design of Promising Uranyl(VI) Complexes Thin Films with Potential Applications in Molecular Electronics

In this work, it is proposed the development of organic semiconductors (OS) based on uranyl(VI) complexes. The above by means of the synthesis and the characterization of the complexes by Infrared spectroscopy, Nuclear magnetic resonance spectroscopy, mass spectrometry, and X-ray diffraction. Films of these complexes were deposited and subsequently, topographic and structural characterization was carried out by Scanning Electron Microscopy, X-ray diffraction, and Atomic Force Microscopy. Additionally, the nanomechanical evaluation was performed to know the stiffness of uranyl films using their modulus of elasticity. Also, the optical characterization took place in the devices and their bandgap value ranges between 2.40 and 2.93 eV being the minor for the film of the uranyl complex with the N on pyridine in position 4 (2 c). Finally, the electrical behavior of the uranyl(VI) films was evaluated, and important differences were obtained: the uranyl complex with the N on pyridine in position 2 (2 a) film is not influenced by changes in lighting and its current density is in the order of 10-3 A/cm2. The film with uranyl complex with the N on pyridine in position 3 (2 b) and 2 c presents a greater current flow under lighting conditions and two orders of magnitude larger than in film 2 a. In these films 2 b and 2 c, ohmic behavior occurs at low voltages, while at high voltages the charge transport changes to space-charge limited current behavior.

The Tishchenko reaction mediated by organo-f-complexes: the myths and obstacles

For over a century, the Tishchenko reaction has been a valuable technique for synthesizing esters from aldehydes, serving a variety of applications in different domains. Beyond the remarkable advances in organoactinide and organolanthanide chemistry over the past two decades, there has been a significant increase in the research of the electrophilic d0/fn chemistry of organoactinide and organolanthanide compounds due to the captivating interplay between their structure and reactivity, and their exceptional performance in various homogeneous catalytic processes. The remarkable influence of ligand design, both in terms of steric hindrance and electronic properties, on the catalytic activity of organo-f-element complexes in organic transformations is well-established. However, the traditional view was that the significant oxophilicity of actinide and lanthanide complexes makes them unfavorable for reactions involving oxygen because of catalytic poisoning and their applications have been relatively limited, primarily focused on hydroalkoxylation, small-molecule activation, and cyclic ester polymerization. This review dissects the intricate interplay between ligand design and catalytic activity in actinide and lanthanide complexes, specifically in the context of the Tishchenko esterification.

Ion-molecule reactions of mass-selected ions

Gas-phase reactions of mass-selected ions with neutrals covers a very broad area of fundamental and applied mass spectrometry (MS). Oftentimes, ion-molecule reactions (IMR) can serve as a viable alternative to collision-induced dissociation and other ion dissociation techniques when using tandem MS. This review focuses on the literature pertaining applications of IMR since 2013. During the past decade considerable efforts have been made in analytical applications of IMR, including advances in one of the major techniques for characterization of unsaturated fatty acids and lipids, ozone-induced dissociation, and the development of a new technique for sequencing of large ions, hydrogen atom attachment/abstraction dissociation. Many advances have also been made in identifying gas-phase chemistry specific to a functional group in organic and biological compounds, which are useful in structure elucidation of analytes and differentiation of isomers/isobars. With "soft" ionization techniques like electrospray ionization having become mainstream for quite some time now, the efforts in the area of metal ion catalysis have firmly moved into exploring chemistry of ligated metal complexes in their "natural" oxidation states allowing to model individual steps of mechanisms in homogeneous catalysis, especially in combination with high-level DFT calculations. Finally, IMR continue to contribute to the body of knowledge in the area of chemistry of interstellar processes.

Catalytic regeneration of metal-hydrides from their corresponding metal-alkoxides via the hydroboration of carbonates to obtain methanol and diols

Thorium complexes decorated with 5-, 6-, and 7-membered N-heterocyclic iminato ligands containing mesityl wingtip substitutions have been synthesized and fully characterized. These complexes were found to be efficient in the hydroboration of cyclic and linear organic carbonates with HBpin or 9-BBN promoting their decarbonylation and producing the corresponding boronated diols and methanol. In addition, the hydroboration of CO2 breaks the molecule into "CO" and "O" forming boronated methanol and pinBOBpin. Moreover, the demanding depolymerization of polycarbonates to the corresponding boronated diols and methanol opens the possibility of recycling polymers for energy sources. Increasing the core ring size of the ligands allows a better performance of the complexes. The reaction proceeds with high yields under mild reaction conditions, with low catalyst loading, and short reaction times, and shows a broad applicability scope. The reaction is achieved via the recycling of a high-energy Th-H moiety from a stable Th-OR motif. Experimental evidence and DFT calculations corroborate the formation of the thorium hydride species and the reduction of the carbonate with HBpin to the corresponding Bpin-protected alcohols and H3COBpin through the formate and acetal intermediates.

Synthesis, Covalency Sequence, and Crystal Features of Pentagonal Uranyl Acylpyrazolone Complexes along with DFT Calculation and Hirshfeld Analysis

Three uranyl acylpyrazolone complexes [UO₂(PCBPMP)₂(CH₃CH₂OH)] (complex I), [UO₂(PCBMCPMP)₂(CH₃CH₂OH)] (complex II), and [UO₂(PCBPTMP)₂(CH₃CH₂OH)] (complex III) were synthesized from σ-donating acypyrazolone ligands to analyze their sequence of covalent characteristics, reactivity, and redox properties (PCBPMP: p-chlorobenzoyl 1-phenyl 3-methyl 5-pyrazolone; PCBMCPMP: p-chlorobenzoyl 1-(m-chlorophenyl) 3-methyl 5-pyrazolone; PCBPTMP: p-chlorobenzoyl 1-(p-tolyl) 3-methyl 5-pyrazolone). An examination of the structure, pentagonal bipyramidal geometry, and composition of these complexes was conducted mainly through their single-crystal X-ray diffraction (XRD) data, ¹H nuclear magnetic resonance (NMR) δ-values, plots of thermogravimetric-differential thermal analysis (TG-DTA), significant Fourier transform infrared (FTIR) vibrations, gravimetric estimation, and molar conductivity values. The covalency order was found to be complex II > III > I, which mainly depends on values of stretching frequencies, average bond lengths of axial uranyl bonds, values of average bond lengths on the pentagonal equatorial plane, solvent coordination on the fifth site of a pentagonal plane, and the type of aryl group on the nitrogen of the pyrazolone ring. This was confirmed by FTIR spectroscopy and single-crystal spectral characterization. To verify experimental results by comparison with theoretical results, density functional theory (DFT) calculations were carried out, which further gives evidence for the covalency order through theoretical frequencies and the gap of highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energies. Theoretical bond properties were also examined by the identification of global index parameters. Intermolecular noncovalent surface interactions were studied by the Hirshfeld surface analysis. The irreversible redox behavior of uranyl species was identified through electrochemical cyclic voltammetry-differential pulse voltammetry (CV-DPV) plot analysis.

Electroreductive CO coupling of benzaldehyde over SACs Au-NiMn2O4 spinel synergetic composites

Electroreductive CO coupling provides a prospective strategy for biomass derivative upgrading via reducing the number of oxygen-containing functional groups and increasing their molecular weight. However, exploring superior electrocatalysts with effective reactivity and high selectivity for target products are still a challenge. In this work, single atom Au surface derived NiMn₂O₄ (SACs Au-NiMn₂O₄) spinel synergetic composites were fabricated by a versatile adsorption-deposition method and applied in electroreductive self-coupling of benzaldehyde to dibenzyl ether. The SACs Au-NiMn₂O₄ spinel synergetic composites enhanced electroreductive coupling of benzaldehyde, significantly improved the yield and selectivity of dibenzyl ether. Systematic characterizations and density functional theory calculation revealed that atomically dispersed Au occupied surface Ni²⁺ vacancies, which played a dominated role in CO coupling of benzaldehyde. Detailed calculation results showed that benzaldehyde preferred to adsorb on Ni octa-hedral sites of NiMn₂O₄ spinel synergetic structure, single atom Au surficial derivation over NiMn₂O₄ further reduced the adsorption energy (E_ads) of benzaldehyde on SACs Au-NiMn₂O₄, thus the CO coupling of benzaldehyde to dibenzyl ether was promoted. Moreover, single atom Au surficial derivation lowered the energy barrier of rate-determining step, facilitated the formation of dibenzyl ether species. Our work also paves an avenue for rational design single atom materials using spinel as support.

Iridium-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with alcohols

An iridium complex-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with primary alcohols is presented, affording allyl ethers in excellent yields. Deuterated and control experiments showed that this etherification transformation proceeded through a cascade transfer hydrogenation and alcohol condensation process. Moreover, the utility of this protocol is evidenced by the gram-scale performance.

A Sacrificial Iminato Ligand in the Catalytic Cyanosilylation of Ketones Promoted by Organoactinide Complexes

Four new complexes containing the bis(pentamethylcyclopentadienyl)thorium(IV) moiety, Cp*₂Th(L1)(Me) (Th2), Cp*₂Th(L2)(Me) (Th3), Cp*₂Th(L1)Cl (Th5), and Cp*₂Th(L2)Cl (Th6), were synthesized in quantitative yields via the protonolysis reaction of the metallocene precursor complexes Cp*₂Th(Me)₂ (Th1) and Cp*₂Th(Me)Cl (Th4) and the respective six- and seven-membered N-heterocyclic neutral imine ligands L1H and L2H. The molecular structures of all the complexes were established by single-crystal X-ray structure analyses. The synthesized complexes along with the precursor complexes were employed as catalysts for the cyanosilylation reaction of ketones with trimethylsilyl cyanide (Me₃SiCN). The removal of the iminato ligand is necessary to trigger the reaction, allowing the formation of the active catalyst.

Silver(i)-catalyzed oxidative coupling of hydrosilanes with DMF to symmetrical and unsymmetrical disiloxanes

An alternative route to symmetrical and unsymmetrical disiloxanes, utilizing a 0.5% AgNTf2 catalyst to enable oxidative coupling of hydrosilanes with DMF as an oxygen source, is reported.

Uranyl(VI) Triflate as Catalyst for the Meerwein-Ponndorf-Verley Reaction

Catalytic transformation of oxygenated compounds is challenging in f-element chemistry due to the high oxophilicity of the f-block metals. We report here the first Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl substrates with uranium-based catalysts, in particular from a series of uranyl(VI) compounds where [UO₂(OTf)₂] (1) displays the greatest efficiency (OTf = trifluoromethanesulfonate). [UO₂(OTf)₂] reduces a series of aromatic and aliphatic aldehydes and ketones into their corresponding alcohols with moderate to excellent yields, using ⁱPrOH as a solvent and a reductant. The reaction proceeds under mild conditions (80 °C) with an optimized catalytic charge of 2.3 mol % and KOⁱPr as a cocatalyst. The reduction of aldehydes (1-10 h) is faster than that of ketones (>15 h). NMR investigations clearly evidence the formation of hemiacetal intermediates with aldehydes, while they are not formed with ketones.

Catalytic Reductive Alcohol Etherifications with Carbonyl-Based Compounds or CO2 and Related Transformations for the Synthesis of Ether Derivatives

Ether derivatives have myriad applications in several areas of chemical industry and academia. Hence, the development of more effective and sustainable protocols for their production is highly desired. Among the different methodologies reported for ether synthesis, catalytic reductive alcohol etherifications with carbonyl-based moieties (aldehydes/ketones and carboxylic acid derivatives) have emerged in the last years as a potential tool. These processes constitute appealing routes for the selective production of both symmetrical and asymmetrical ethers (including O-heterocycles) with an increased molecular complexity. Likewise, ester-to-ether catalytic reductions and hydrogenative alcohol etherifications with CO2 to dialkoxymethanes and other acetals, albeit in less extent, have undergone important advances, too. In this Review, an update of the recent progresses in the area of catalytic reductive alcohol etherifications using carbonyl-based compounds and CO2 have been described with a special focus on organic synthetic applications and catalyst design. Complementarily, recent progress made in catalytic acetal/ketal-to-ether or ester-to-ether reductions and other related transformations have been also summarized.

From Chemical Curiosities and Trophy Molecules to Uranium-Based Catalysis: Developments for Uranium Catalysis as a New Facet in Molecular Uranium Chemistry

Catalysis remains one of the final frontiers in molecular uranium chemistry. Depleted uranium is mildly radioactive, continuously generated in large quantities from the production and consumption of nuclear fuels and accessible through the regeneration of "uranium waste". Organometallic complexes of uranium possess a number of properties that are appealing for applications in homogeneous catalysis. Uranium exists in a wide range of oxidation states, and its large ionic radii support chelating ligands with high coordination numbers resulting in increased complex stability. Its position within the actinide series allows it to involve its f-orbitals in partial covalent bonding; yet, the U-L bonds remain highly polarized. This causes these bonds to be reactive and, with few exceptions, relatively weak, allowing for high substrate on/off rates. Thus, it is reasonable that uranium could be considered as a source of metal catalysts. Accordingly, uranium complexes in oxidation states +4, +5, and +6 have been studied extensively as catalysts in sigma-bond metathesis reactions, with a body of literature spanning the past 40 years. High-valent species have been documented to perform a wide variety of reactions, including oligomerization, hydrogenation, and hydrosilylation. Concurrently, electron-rich uranium complexes in oxidation states +2 and +3 have been proven capable of performing reductive small molecule activation of N₂, CO₂, CO, and H₂O. Hence, uranium's ability to activate small molecules of biological and industrial relevance is particularly pertinent when looking toward a sustainable future, especially due to its promising ability to generate ammonia, molecular hydrogen, and liquid hydrocarbons, though the advance of catalysis in these areas is in the early stages of development. In this Perspective, we will look at the challenges associated with the advance of new uranium catalysts, the tools produced to combat these challenges, the triumphs in achieving uranium catalysis, and our future outlook on the topic.

Recent developments in highly basic N-heterocyclic iminato ligands in actinide chemistry

In the last decade, major conceptual advances in the chemistry of actinide molecules and materials have been made to demonstrate their distinct reactivity profiles as compared to lanthanide and transition metal compounds, but some difficult questions remain concerning the intriguing stability of low-valent actinide complexes, and the importance of the 5f-orbitals in reactivity and bonding. The imidazolin-2-iminato moiety has been extensively used in ligands for the advancement of actinide chemistry owing to its unique capability of stabilizing the reactive and highly electrophilic metal ions by virtue of its strong electron donation and steric tunability. The current review article describes recent developments in the chemistry of light actinide metal ions (thorium and uranium) bearing these N-heterocyclic iminato moieties as supporting ligands. In addition, the effect of ring expansion of the N-heterocycle on the catalytic aptitude of the organoactinides is also described herein. The synthesis and reactivity of actinide complexes bearing N-heterocyclic iminato ligands are presented, and promising apposite applications are also presented. The current review focuses on addressing the catalytic behavior of actinide complexes with oxygen-containing substrates such as in the Tishchenko reaction, hydroelementation processes, and polymerization reactions. Actinide complexes have also found new catalytic applications, as demonstrated by the potent chemoselective carbonyl hydroboration and tandem proton-transfer esterification (TPTE) reaction, featuring coupling between an aldehyde and alcohol.

Uranyl-catalyzed hydrosilylation of para-quinone methides: access to diarylmethane derivatives

An efficient and convenient uranyl-catalyzed reductive hydrosilylation reaction of para-quinone methides (p-QMs) was developed by employing silane as the reductant. The hydrosilylation procedure using the UO2(NO3)2·6H2O/Et3SiH catalytic system proceeded smoothly and provided an expedient method for the construction of various diarylmethane derivatives in one step with good to excellent yields.

Self-assembly of Keggin-type U(vi)-containing tungstophosphates with a sandwich structure: an efficient catalyst for the synthesis of sulfonyl pyrazoles

Two Keggin-type U(vi)-containing tungstophosphates with sandwich structure were synthesized and characterized. Compound 1 presents excellent catalytic activity towards the condensation cyclization of sulfonyl hydrazines with 1,3-diketones to synthesize sulfonyl pyrazoles.

Detailed characterization of dioxouranium(vi) complexes with a symmetrical tetradentate N2O2-benzil bis(isonicotinoyl hydrazone) ligand

The reactions of UO2(OAc)2·2H2O with benzil bis(isonicotinoyl hydrazone) ligand (H2L) in varied solvent media resulted in the formation of a series of new dioxouranium(vi) complexes 1-3 of the type UO2(L)(X), [where 1, X = DMF; 2, X = DMSO; 3, X = H2O]. The complexes were systematically characterized by elemental analysis, UV-Visible spectroscopy, TGA, mass spectrometry, cyclic voltammetry, and powder X-ray diffraction study. Among all the complexes, 1 was confirmed by single-crystal X-ray diffraction study. It was found that 1 preferred a distorted pentagonal bipyramidal geometry, in which an equatorial coordination plane was formed by the ONNO-tetradentate cavity of the deprotonated hydrazone ligand along with an additional oxygen atom of the coordinated solvent molecule. Thermal analysis suggested that complexes 1 and 3 undergo weight loss in the temperature range 180-210 °C and 100-120 °C, respectively, due to the ready release of their coordinated solvent molecules. Complexes 1-3 exhibited analogous UV-Visible absorption bands and the intense band between 300-600 nm was assigned to the M ← L and n → π* transitions. Weakly resolved reduction waves assigned to {UO2}2+/{UO2}+ couple were observed for complexes 1 and 2 {1, -1.76 V; 2, -1.75 V; vs. ferrocenium/ferrocene (Fc+/Fc)} in DMSO solution, signifying the feeble electron-donating nature of the L2- ligand. Powder X-ray diffraction study suggested that the crystallite size of all the complexes was in the nanoscale range. Further analysis using density functional theory (DFT) calculations provided structural insights as well as information on the electronic properties of both complex 1 and the ligand.

Hydrothermal synthesis of two 2D uranyl coordination polymers: structure, luminescence, and photocatalytic degradation of rhodamine B

Two hydrothermal synthesized uranyl-organic coordination polymers showing effective photocatalytic activities for RhB degradation with quick equilibrium time in water.