Volcano Trend in Electrocatalytic CO2 Reduction Activity over Atomically Dispersed Metal Sites on Nitrogen-Doped Carbon

From Charge to Spin: An In-Depth Exploration of Electron Transfer in Energy Electrocatalysis

Catalytic materials play crucial roles in various energy-related processes, ranging from large-scale chemical production to advancements in renewable energy technologies. Despite a century of dedicated research, major enduring challenges associated with enhancing catalyst efficiency and durability, particularly in green energy-related electrochemical reactions, remain. Focusing only on either the crystal structure or electronic structure of a catalyst is deemed insufficient to break the linear scaling relationship (LSR), which is the golden rule for the design of advanced catalysts. The discourse in this review intricately outlines the essence of heterogeneous catalysis reactions by highlighting the vital roles played by electron properties. The physical and electrochemical properties of electron charge and spin that govern catalysis efficiencies are analyzed. Emphasis is placed on the pronounced influence of external fields in perturbing the LSR, underscoring the vital role that electron spin plays in advancing high-performance catalyst design. The review culminates by proffering insights into the potential applications of spin catalysis, concluding with a discussion of extant challenges and inherent limitations.

Pressure-Dependent CO2 Electroreduction to Methane over Asymmetric Cu-N2 Single-Atom Sites

Single-atom catalysts (SACs) with unitary active sites hold great promise for realizing high selectivity toward a single product in the CO2 electroreduction reaction (CO2RR). However, achieving high Faradaic efficiency (FE) of multielectron products like methane on SACs is still challenging. Herein, we report a pressure-regulating strategy that achieves 83.5 ± 4% FE for the CO2-to-CH4 conversion on the asymmetric Cu-N2 sites, representing one of the best CO2-to-CH4 performances. Elevated CO2 pressure was demonstrated as an efficient way to inhibit the hydrogen evolution reaction via promoting the competing adsorption of reactant CO2, regardless of the nature of the active sites. Meanwhile, the asymmetric Cu-N2 structure could endow the Cu sites with stronger electronic coupling with *CO, thus suppressing the desorption of *CO and facilitating the following hydrogenation of *CO to *CHO. This work provides a synergetic strategy of the pressure-induced reaction environment regulating and the electronic structure modulating for selective CO2RR toward targeted products.

Transition-Metal Porphyrin-Based MOFs In Situ-Derived Hybrid Catalysts for Electrocatalytic CO2 Reduction

Excellent electrocatalytic CO2 reduction reaction activity has been demonstrated by transition metals and nitrogen-codoped carbon (M-N-C) catalysts, especially for transition-metal porphyrin (MTPP)-based catalysts. In this work, we propose to use one-step low-temperature pyrolysis of the isostructural MTPP-based metal-organic frameworks (MOFs) and electrochemical in situ reduction strategies to obtain a series of hybrid catalysts of Co nanoparticles (Co NPs) and MTPP, named Co NPs/MTPP (M = Fe, Co, and Ni). The in situ introduction of Co NPs can efficiently enhance the electrocatalytic ability of MTPP (M = Fe, Co, and Ni) to convert CO2 to CO, particularly for FeTPP. Co NPs/FeTPP endowed a high CO faradaic efficiency (FECOmax = 95.5%) in the H cell, and the FECO > 90.0% is in the broad potential range of -0.72 to -1.22 VRHE. In addition, the Co NPs/FeTPP achieved 145.4 mA cm-2 at a lower potential of -0.70 VRHE with an FECO of 94.7%, and the CO partial currents increased quickly to reach 202.2 mA cm-2 at -0.80 VRHE with an FECO of 91.6% in the flow cell. It is confirmed that Co NPs are necessary for hybrid catalysts to get superior electrocatalytic activity; Co NPs also can accelerate H2O dissociation and boost the proton supply capacity to hasten the proton-coupled electron-transfer process, effectively adjusting the adsorption strength of the reaction intermediates.

A novel electrochemical flow-cell for operando XAS investigations in X-ray opaque supports

Improvement of electrochemical technologies is one of the most popular topics in the field of renewable energy. However, this process requires a deep understanding of the electrode-electrolyte interface behavior under operando conditions. X-ray absorption spectroscopy (XAS) is widely employed to characterize electrode materials, providing element-selective oxidation state and local structure. Several existing cells allow studies as close as possible to realistic operating conditions, but most of them rely on the deposition of the electrodes on conductive and X-ray transparent materials, from where the radiation impinges the sample. In this work, we present a new electrochemical flow-cell for operando XAS that can be used with X-ray opaque substrates, since the signal is effectively detected from the electrode surface, as the radiation passes through a thin layer of electrolyte (∼17 μm). The electrolyte can flow over the electrode, reducing bubble formation and avoiding strong reactant concentration gradients. We show that high-quality data can be obtained under operando conditions, thanks to the high efficiency of the cell from the hard X-ray regime down to ∼4 keV. We report as a case study the operando XAS investigation at the Fe and Ni K-edges on Ni-doped γ-Fe2O3 films, epitaxially grown on Pt substrates. The effect of the Ni content on the catalytic performances for the oxygen evolution reaction is discussed.

Reversible Structural Evolution of Metal-Nitrogen-Doped Carbon Catalysts During CO2 Electroreduction: An Operando X-ray Absorption Spectroscopy Study

Electrochemical CO2 reduction (CO2 RR) is a rising technology, aiming to reduce the energy sector dependence on fossil fuels and to produce carbon-neutral raw materials. Metal-nitrogen-doped carbons (M-N-C) are emerging, cost-effective catalysts for this reaction; however, their long-term stability is a major issue. To overcome this, understanding their structural evolution is crucial, requiring systematic in-depth operando studies. Here a series of M-N-C catalysts (M = Fe, Sn, Cu, Co, Ni, Zn) is investigated using operando X-ray absorption spectroscopy. It is found that the Fe-N-C and Sn-N-C are prone to oxide clusters formation even before CO2 RR. In contrast, the respective metal cations are singly dispersed in the as-prepared Cu-N-C, Co-N-C, Ni-N-C, and (Zn)-N-C. During CO2 RR, metallic clusters/nanoparticles reversibly formed in all catalysts, except for the Ni-N-C. This phenomenon, previously observed only in Cu-N-C, thus is ubiquitous in M-N-C catalysts. The competition between M-O and M-N interactions is an important factor determining the mobility of metal species in M-N-C. Specifically, the strong interaction between the Ni centers and the N-functional groups of the carbon support results in higher stability of the Ni single-sites, leading to the excellent performance of Ni-N-C in the CO2 to CO conversion, in comparison to other transition metals.

Modulating Electron Density of Ni-N-C Sites by N-doped Ni for Industrial-level CO2 Electroreduction in Acidic Media

Electro-chemically reducing CO2 in a highly acidic medium is promising for addressing the issue of carbonate accumulation. However, the hydrogen evolution reaction (HER) typically dominates the acidic CO2 reduction. Herein, we construct an efficient electro-catalyst for CO formation based on a core-shell structure, where nitrogen-doped Ni nanoparticles coexist with nitrogen-coordinated Ni single atoms. The optimal catalyst demonstrates a significantly improved CO faradaic efficiency (FE) of 96.7 % in the acidic electrolyte (pH=1) at an industrial-scale current density of 500 mA cm-2 . Notably, the optimal catalyst maintains a high FE of CO exceeding 90 % (current density=500 mA cm-2 ) in the electrolyte with a wide pH range from 0.67 to 14. In-situ spectroscopic characterization and density functional theory calculations show that the local electron density of Ni-N-C sites is enhanced by N-doped Ni particles, which facilitates the formation of *COOH intermediate and the adsorption of *CO. This study demonstrates the potential of a hybrid metal/Ni-N-C interface in boosting acidic CO2 electro-reduction.

Electrochemical carbonyl reduction on single-site M-N-C catalysts

Electrochemical conversion of organic compounds holds promise for advancing sustainable synthesis and catalysis. This study explored electrochemical carbonyl hydrogenation on single-site M-N-C (Metal Nitrogen-doped Carbon) catalysts using formaldehyde, acetaldehyde, and acetone as model reactants. We strive to correlate and understand the selectivity dependence on the nature of the metal centers. Density Functional Theory calculations revealed similar binding energetics for carbonyl groups through oxygen-down or carbon-down adsorption due to oxygen and carbon scaling. Fe-N-C exhibited specific oxyphilicity and could selectively reduce aldehydes to hydrocarbons. By contrast, the carbophilic Co-N-C selectively converted acetaldehyde and acetone to ethanol and 2-propanol, respectively. We claim that the oxyphilicity of the active sites and consequent adsorption geometry (oxygen-down vs. carbon-down) are crucial in controlling product selectivity. These findings offer mechanistic insights into electrochemical carbonyl hydrogenation and can guide the development of efficient and sustainable electrocatalytic valorization of biomass-derived compounds.

Activating dynamic atomic-configuration for single-site electrocatalyst in electrochemical CO2 reduction

One challenge for realizing high-efficiency electrocatalysts for CO2 electroreduction is lacking in comprehensive understanding of potential-driven chemical state and dynamic atomic-configuration evolutions. Herein, by using a complementary combination of in situ/operando methods and employing copper single-atom electrocatalyst as a model system, we provide evidence on how the complex interplay among dynamic atomic-configuration, chemical state change and surface coulombic charging determines the resulting product profiles. We further demonstrate an informative indicator of atomic surface charge (φe) for evaluating the CO2RR performance, and validate potential-driven dynamic low-coordinated Cu centers for performing significantly high selectivity and activity toward CO product over the well-known four N-coordinated counterparts. It indicates that the structural reconstruction only involved the dynamic breaking of Cu-N bond is partially reversible, whereas Cu-Cu bond formation is clearly irreversible. For all single-atom electrocatalysts (Cu, Fe and Co), the φe value for efficient CO production has been revealed closely correlated with the configuration transformation to generate dynamic low-coordinated configuration. A universal explication can be concluded that the dynamic low-coordinated configuration is the active form to efficiently catalyze CO2-to-CO conversion.

Combining Fe nanoparticles and pyrrole-type Fe-N4 sites on less-oxygenated carbon supports for electrochemical CO2 reduction

A great challenge for electrochemical CO2 reduction is to improve energy efficiency, which requires reducing overpotential while increasing product Faraday efficiency. Here, we designedly synthesize a hybrid electrocatalyst consisting of Fe nanoparticles, pyrrole-type Fe-N4 sites and less-oxygenated carbon supports, which exhibits a remarkable CO Faraday efficiency above 99% at an ultralow overpotential of 21 mV, reaching the highest cathode energy efficiency of 97.1% to date. The catalyst also can afford a CO selectivity nearly 100% with a high cathode energy efficiency (>90%) at least 100 h. The combined results of control experiments, in situ characterizations and theoretical calculations demonstrate that introducing Fe nanoparticles can reduce the overpotential by accelerating the proton transfer from CO2 to *COOH and lowering the free energy for *COOH formation, constructing pyrrole-type Fe-N4 sites and limiting oxygen species on carbon supports can increase CO Faraday efficiency through inhibiting the H2 evolution, thus achieving energy-efficient electrochemical CO2 reduction to CO.

Unraveling the Electronic Structure and Dynamics of the Atomically Dispersed Iron Sites in Electrochemical CO2 Reduction

Single-atom catalysts with a well-defined metal center open unique opportunities for exploring the catalytically active site and reaction mechanism of chemical reactions. However, understanding of the electronic and structural dynamics of single-atom catalytic centers under reaction conditions is still limited due to the challenge of combining operando techniques that are sensitive to such sites and model single-atom systems. Herein, supported by state-of-the-art operando techniques, we provide an in-depth study of the dynamic structural and electronic evolution during the electrochemical CO₂ reduction reaction (CO₂RR) of a model catalyst comprising iron only as a high-spin (HS) Fe(III)N₄ center in its resting state. Operando ⁵⁷Fe Mössbauer and X-ray absorption spectroscopies clearly evidence the change from a HS Fe(III)N₄ to a HS Fe(II)N₄ center with decreasing potential, CO₂- or Ar-saturation of the electrolyte, leading to different adsorbates and stability of the HS Fe(II)N₄ center. With operando Raman spectroscopy and cyclic voltammetry, we identify that the phthalocyanine (Pc) ligand coordinating the iron cation center undergoes a redox process from Fe(II)Pc to Fe(II)Pc^-. Altogether, the HS Fe(II)Pc^- species is identified as the catalytic intermediate for CO₂RR. Furthermore, theoretical calculations reveal that the electroreduction of the Pc ligand modifies the d-band center of the in situ generated HS Fe(II)Pc^- species, resulting in an optimal binding strength to CO₂ and thus boosting the catalytic performance of CO₂RR. This work provides both experimental and theoretical evidence toward the electronic structural and dynamics of reactive sites in single-Fe-atom materials and shall guide the design of novel efficient catalysts for CO₂RR.

Favoring Product Desorption by a Tailored Electronic Environment of Oxygen Vacancies in SrTiO3 via Cr Doping for Enhanced and Selective Electrocatalytic CO2 to CO Conversion

The electrochemical CO₂ reduction reaction (ECO₂RR) into value-added products is crucial to address the herculean task of CO₂ mitigation. Several efforts are being made to develop active ECO₂RR catalysts, targeting enhanced CO₂ adsorption and activation. A rational design of ECO₂RR catalysts with a facile product desorption step is seldom reported. Herein, ensuing the Sabatier principle, we report a strategy for an enhanced ECO₂RR with a faradaic efficiency of 85% for CO production by targeting the product desorption step. The energy barrier for product desorption was lowered via a tailored electronic environment of oxygen vacancies (O_vac) in Cr-doped SrTiO₃. The substitutional doping of Cr³⁺ for Ti⁴⁺ into the SrTiO₃ lattice favors the generation of more O_vac and modifies the local electronic environment. Density functional theory analysis evinces the spontaneous dissociation of COOH^# intermediates over O_vac and lower CO intermediate binding on O_vac reducing the energy demand for CO release due to Cr doping.

Manipulating local coordination of copper single atom catalyst enables efficient CO2-to-CH4 conversion

Electrochemical CO2 conversion to methane, powered by intermittent renewable electricity, provides an entrancing opportunity to both store renewable electric energy and utilize emitted CO2. Copper-based single atom catalysts are promising candidates to restrain C-C coupling, suggesting feasibility in further protonation of CO* to CHO* for methane production. In theoretical studies herein, we find that introducing boron atoms into the first coordination layer of Cu-N4 motif facilitates the binding of CO* and CHO* intermediates, which favors the generation of methane. Accordingly, we employ a co-doping strategy to fabricate B-doped Cu-Nx atomic configuration (Cu-NxBy), where Cu-N2B2 is resolved to be the dominant site. Compared with Cu-N4 motifs, as-synthesized B-doped Cu-Nx structure exhibits a superior performance towards methane production, showing a peak methane Faradaic efficiency of 73% at -1.46 V vs. RHE and a maximum methane partial current density of -462 mA cm-2 at -1.94 V vs. RHE. Extensional calculations utilizing two-dimensional reaction phase diagram analysis together with barrier calculation help to gain more insights into the reaction mechanism of Cu-N2B2 coordination structure.

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. This Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

Operando Spectroscopic Analysis of Axial Oxygen-Coordinated Single-Sn-Atom Sites for Electrochemical CO2 Reduction

Sn-based materials have been demonstrated as promising catalysts for the selective electrochemical CO₂ reduction reaction (CO₂RR). However, the detailed structures of catalytic intermediates and the key surface species remain to be identified. In this work, a series of single-Sn-atom catalysts with well-defined structures is developed as model systems to explore their electrochemical reactivity toward CO₂RR. The selectivity and activity of CO₂ reduction to formic acid on Sn-single-atom sites are shown to be correlated with Sn(IV)-N₄ moieties axially coordinated with oxygen (O-Sn-N₄), reaching an optimal HCOOH Faradaic efficiency of 89.4% with a partial current density (j_HCOOH) of 74.8 mA·cm^-2 at -1.0 V vs reversible hydrogen electrode (RHE). Employing a combination of operando X-ray absorption spectroscopy, attenuated total reflectance surface-enhanced infrared absorption spectroscopy, Raman spectroscopy, and ¹¹⁹Sn Mössbauer spectroscopy, surface-bound bidentate tin carbonate species are captured during CO₂RR. Moreover, the electronic and coordination structures of the single-Sn-atom species under reaction conditions are determined. Density functional theory (DFT) calculations further support the preferred formation of Sn-O-CO₂ species over the O-Sn-N₄ sites, which effectively modulates the adsorption configuration of the reactive intermediates and lowers the energy barrier for the hydrogenation of *OCHO species, as compared to the preferred formation of *COOH species over the Sn-N₄ sites, thereby greatly facilitating CO₂-to-HCOOH conversion.

Doped Graphene To Mimic the Bacterial NADH Oxidase for One-Step NAD+ Supplementation in Mammals

Nicotinamide adenine dinucleotide (NAD) is a critical regulator of metabolic networks, and declining levels of its oxidized form, NAD⁺, are closely associated with numerous diseases. While supplementing cells with precursors needed for NAD⁺ synthesis has shown poor efficacy in combatting NAD⁺ decline, an alternative strategy is the development of synthetic materials that catalyze the oxidation of NADH into NAD⁺, thereby taking over the natural role of the NADH oxidase (NOX) present in bacteria. Herein, we discovered that metal-nitrogen-doped graphene (MNGR) materials can catalyze the oxidation of NADH into NAD⁺. Among MNGR materials with different transition metals, Fe-, Co-, and Cu-NGR displayed strong catalytic activity combined with >80% conversion of NADH into NAD⁺, similar specificity to NOX for abstracting hydrogen from the pyridine ring of nicotinamide, and higher selectivity than 51 other nanomaterials. The NOX-like activity of FeNGR functioned well in diverse cell lines. As a proof of concept of the in vivo application, we showed that FeNGR could specifically target the liver and remedy the metabolic flux anomaly in obesity mice with NAD⁺-deficient cells. Overall, our study provides a distinct insight for exploration of drug candidates by design of synthetic materials to mimic the functions of unique enzymes (e.g., NOX) in bacteria.

Liquid Fluxional Ga Single Atom Catalysts for Efficient Electrochemical CO2 Reduction

Precise design and tuning of the micro-atomic structure of single atom catalysts (SACs) can help efficiently adapt complex catalytic systems. Herein, we inventively found that when the active center of the main group element gallium (Ga) is downsized to the atomic level, whose characteristic has significant differences from conventional bulk and rigid Ga catalysts. The Ga SACs with a P, S atomic coordination environment display specific flow properties, showing CO products with FE of ≈92 % at -0.3 V vs. RHE in electrochemical CO₂ reduction (CO₂ RR). Theoretical simulations demonstrate that the adaptive dynamic transition of Ga optimizes the adsorption energy of the *COOH intermediate and renews the active sites in time, leading to excellent CO₂ RR selectivity and stability. This liquid single atom catalysts system with dynamic interfaces lays the foundation for future exploration of synthesis and catalysis.

Catalytic Potential of Post-Transition Metal Doped Graphene-Based Single-Atom Catalysts for the CO2 Electroreduction Reaction

Catalysts are required to ensure electrochemical reduction of CO2 to fuels proceeds at industrially acceptable rates and yields. As such, highly active and selective catalysts must be developed. Herein, a density functional theory study of p-block element and noble metal doped graphene-based single-atom catalysts in two defect sites for the electrochemical reduction of CO2 to CO and HCOOH is systematically undertaken. It is found that on all of the systems considered, the thermodynamic product is HCOOH. Pb/C3 , Pb/N4 and Sn/C3 are identified as having the lowest overpotential for HCOOH production while Al/C3 , Al/N4 , Au/C3 and Ga/C3 are identified as having the potential to form higher order products due to the strength of binding of adsorbed HCOOH.

Pseudo-adsorption and long-range redox coupling during oxygen reduction reaction on single atom electrocatalyst

Fundamental understanding of the dynamic behaviors at the electrochemical interface is crucial for electrocatalyst design and optimization. Here, we revisit the oxygen reduction reaction mechanism on a series of transition metal (M = Fe, Co, Ni, Cu) single atom sites embedded in N-doped nanocarbon by ab initio molecular dynamics simulations with explicit solvation. We have identified the dissociative pathways and the thereby emerged solvated hydroxide species for all the proton-coupled electron transfer (PCET) steps at the electrochemical interface. Such hydroxide species can be dynamically confined in a "pseudo-adsorption" state at a few water layers away from the active site and respond to the redox event at the catalytic center in a coupled manner within timescale less than 1 ps. In the PCET steps, the proton species (in form of hydronium in neutral/acidic media or water in alkaline medium) can protonate the pseudo-adsorbed hydroxide without needing to travel to the direct catalyst surface. This, therefore, expands the reactive region beyond the direct catalyst surface, boosting the reaction kinetics via alleviating mass transfer limits. Our work implies that in catalysis the reaction species may not necessarily bind to the catalyst surface but be confined in an active region.

Holdups in Nitride MXene's Development and Limitations in Advancing the Field of MXene

As nanomaterials are becoming a key component in various electronics, 2D nanomaterials are emerging and attracting tremendous attention in the scientific community due to their unique physical, chemical, and structural properties. In recent years, a new family of 2D carbides and nitrides, known as MXenes, has become the center of attention for many electrochemical energy storage and conversion systems. While nitride MXenes have some publications centered around them, the overwhelming majority revolve around carbide and their direct application to systems without understanding the underlying mechanism behind their performance. The lack of publications in both of these fields, nitrides and mechanistic understanding, causes a major stopgap in MXene research and needs to be remedied in order to truly utilize their potential for future electronics and energy conversion systems. In this work, the limited works on nitride MXenes and the applications of in situ/operando characterization techniques in understanding the underlying mechanisms of energy storage and conversion in MXenes are reviewed, major progress and remaining challenges in both fields are identified, recommendations on how to circumvent the challenges and limitations are provided, and finally, new research directions that must be performed to advance the field of 2D carbide and nitride MXenes are proposed.

Artificial-intelligence-driven discovery of catalyst genes with application to CO2 activation on semiconductor oxides

Catalytic-materials design requires predictive modeling of the interaction between catalyst and reactants. This is challenging due to the complexity and diversity of structure-property relationships across the chemical space. Here, we report a strategy for a rational design of catalytic materials using the artificial intelligence approach (AI) subgroup discovery. We identify catalyst genes (features) that correlate with mechanisms that trigger, facilitate, or hinder the activation of carbon dioxide (CO2) towards a chemical conversion. The AI model is trained on first-principles data for a broad family of oxides. We demonstrate that surfaces of experimentally identified good catalysts consistently exhibit combinations of genes resulting in a strong elongation of a C-O bond. The same combinations of genes also minimize the OCO-angle, the previously proposed indicator of activation, albeit under the constraint that the Sabatier principle is satisfied. Based on these findings, we propose a set of new promising catalyst materials for CO2 conversion.

Fe-Catalyzed CO2 Adsorption over Hexagonal Boron Nitride with the Presence of H2O

The energy barrier of CO₂ chemically adsorbed on hexagonal boron nitride (h-BN) is relatively big. In order to cut down the energy barriers and facilitate fast adsorption of CO₂, it is necessary to apply catalysts as a promoter. In this study, single-atom iron is introduced as the catalyst to reduce the energy barriers of CO₂ adsorbed on pure/doped h-BN. Through density functional theory calculations, catalytic reaction mechanisms, stability of single-atom iron fixed on adsorbents, CO₂ adsorption characteristics, and features of thermodynamics/reaction dynamics during adsorption processes are fully investigated to explain the catalytic effects of single-atom iron on CO₂ chemisorption. According to calculations, when CO₂ and OH^- get into activated states (i.e., CO₂^•- and ^•OH) with the help of single-atom iron, their chemical activities will be promoted to a large degree, which makes the transition state (TS) energy barrier of HCO₃^- to decrease by 92.54%. In the meantime, it is proved that single-atom iron could be stably fixed on doped h-BN with the binding energy larger than 2 eV to achieve sustainable catalysis. With the presence of single-atom iron, TS energy barriers of CO₂ adsorbed on h-BN with the presence of H₂O decreased by 94.39, 78.87, and 30.63% over pure h-BN, 3C-doped h-BN, and 3N-doped h-BN, respectively. In the meantime, thermodynamic analyses indicate that TS energy barriers are mainly determined by element doping and temperatures are a little beneficial to the reduction of TS energy barriers. With the above aspects combined, the results of this study could supply crucial information for massively and quickly capturing CO₂ in real industries.

Clustering of metal dopants in defect sites of graphene-based materials

Single-atom catalysts are promising candidates for many industrial reactions. However, making true single-atom catalysts is an experimental dilemma, due to the difficulty of keeping dopant single atoms stable at temperature and under pressure. This difficulty can lead to clustering of the metal dopant atoms in defect sites. However, the electronic and geometric structure of sub-nanoscale clusters in single-atom defects has not yet been explored. Furthermore, recent studies have proven sub-nanoscale clusters of dopants in single-atom defect sites can be equally good or better catalysts than their single-atom counterparts. Here, a comprehensive DFT study is undertaken to determine the geometric and electronic structure effects that influence clustering of noble and p-block dopants in C₃- and N₄-defect sites in graphene-based systems. We find that the defect site is the primary driver in determining clustering dynamics in these systems.

Recent Advances in Catalyst Structure and Composition Engineering Strategies for Regulating CO2 Electrochemical Reduction

Electrochemical CO₂ reduction has been recognized as a promising solution in tackling energy- and environment-related challenges of human society. In the past few years, the rapid development of advanced electrocatalysts has significantly improved the efficiency of this reaction and accelerated the practical applications of this technology. Herein, representative catalyst structures and composition engineering strategies in regulating the CO₂ reduction selectivity and activity toward various products including carbon monoxide, formate, methane, methanol, ethylene, and ethanol are summarized. An overview of in situ/operando characterizations and advanced computational modeling in deepening the understanding of the reaction mechanisms and accelerating catalyst design are also provided. To conclude, future challenges and opportunities in this research field are discussed.

Coordination environment engineering on nickel single-atom catalysts for CO2 electroreduction

Coordination engineering has recently emerged as a promising strategy to boost the activity of single atom catalysts (SACs) in electrocatalytic CO₂ reduction reactions (CO₂RR). Understanding the correlation between activity/selectivity and the coordination environment would enable the rational design of more advanced SACs for CO₂ reduction. Herein, via density functional theory (DFT) computations, we systematically studied the effects of coordination environment regulation on the CO₂RR activity of Ni SACs on C, N, or B co-doped graphene. The results reveal that the coordination environments can strongly affect the adsorption and reaction characteristics. In the C and/or N coordinated Ni-B_XC_YN_Z (B-free, X = 0), only Ni acts as the active site. While in the B, C and/or N coordinated Ni-B_XC_YN_Z (X ≠ 0), the B has transition-metal-like properties, where B and Ni function as dual-site active centers and concertedly tune the adsorption of CO₂RR intermediates. The tunability in the adsorption modes and strengths also results in a weakened linear scaling relationship between *COOH and *CO and causes a significant activity difference. The CO₂RR activity and the adsorption energy of *COOH/*CO are correlated to construct a volcano-type activity plot. Most of the B, C, and/or N-coordinated Ni-B_XC_YN_Z (X ≠ 0) are located in the left region where *CO desorption is the most difficult step, while the C and/or N coordinated Ni-B_XC_YN_Z (X = 0) are located in the right region where *COOH formation is the potential-determining step. Among all the possible Ni-B_XC_YN_Z candidates, Ni-B₀C₃N₁ and Ni-B₁C₁N_2-N-oppo are predicted to be the most active and selective catalysts for the CO₂RR. Our findings provide insightful guidance for developing highly effective CO₂RR catalysts based on a codoped coordination environment.

Fast synthesis of porous iron doped CeO2 with oxygen vacancy for effective CO2 photoreduction

The activity of photocatalytic CO₂ conversion to carbon-containing products is determined by the adsorption and activation of CO₂ molecules on the surface of catalyst. Here, iron doped porous CeO₂ with oxygen vacancy (PFeCe) was prepared by one-step combustion method. The amount of CO₂ adsorbed via using the porous structure has been significantly increased in the case of a relatively small specific surface area and CO₂ molecules are more easily captured and undergo a reduction reaction with photoinduced carriers. In addition, oxygen vacancies are formed in the iron doped CeO₂ lattice as the active sites for CO₂ reduction, which can form strong interactions with CO₂ molecules, thereby effectively activating CO₂ molecules. The reduction products of CO₂ over PFeCe composite are CO and CH₄, which is approximately 9.0 and 7.7 folds than that of CeO₂. This work offers insights for the construction of efficient ceria-based photocatalysts to further achieve robust solar CO₂ conversion.

Effective Screening Route for Highly Active and Selective Metal-Nitrogen-Doped Carbon Catalysts in CO2 Electrochemical Reduction

To identify high-efficiency metal-nitrogen-doped (M-N-C) electrocatalysts for the electrochemical CO₂ -to-CO reduction reaction (CO₂ RR), a method that uses density functional theory calculation is presented to evaluate their selectivity, activity, and structural stability. Twenty-three M-N₄ -C catalysts are evaluated, and three of them (M = Fe, Co, or Ni) are identified as promising candidates. They are synthesized and tested as proof-of-concept catalysts for CO₂ -to-CO conversion. Different key descriptors, including the maximum reaction energy, differences of the *H and *CO binding energy (ΔG_*H -ΔG_*CO ), and *CO desorption energy (ΔG_{*CO→CO( g )} ), are used to clarify the reaction mechanism. These computational descriptors effectively predict the experimental observations in the entire range of electrochemical potential. The findings provide a guideline for rational design of heterogeneous CO₂ RR electrocatalysts.

Chemical vapour deposition of Fe-N-C oxygen reduction catalysts with full utilization of dense Fe-N4 sites

Replacing scarce and expensive platinum (Pt) with metal-nitrogen-carbon (M-N-C) catalysts for the oxygen reduction reaction in proton exchange membrane fuel cells has largely been impeded by the low oxygen reduction reaction activity of M-N-C due to low active site density and site utilization. Herein, we overcome these limits by implementing chemical vapour deposition to synthesize Fe-N-C by flowing iron chloride vapour over a Zn-N-C substrate at 750 °C, leading to high-temperature trans-metalation of Zn-N₄ sites into Fe-N₄ sites. Characterization by multiple techniques shows that all Fe-N₄ sites formed via this approach are gas-phase and electrochemically accessible. As a result, the Fe-N-C catalyst has an active site density of 1.92 × 10²⁰ sites per gram with 100% site utilization. This catalyst delivers an unprecedented oxygen reduction reaction activity of 33 mA cm^-2 at 0.90 V (iR-corrected; i, current; R, resistance) in a H₂-O₂ proton exchange membrane fuel cell at 1.0 bar and 80 °C.

Single-Atom Electrocatalysts for Multi-Electron Reduction of CO2

The multi-electron reduction of CO₂ to hydrocarbons or alcohols is highly attractive in a sustainable energy economy, and the rational design of electrocatalysts is vital to achieve these reactions efficiently. Single-atom electrocatalysts are promising candidates due to their well-defined coordination configurations and unique electronic structures, which are critical for delivering high activity and selectivity and may accelerate the explorations of the activity origin at atomic level as well. Although much effort has been devoted to multi-electron reduction of CO₂ on single-atom electrocatalysts, there are still no reviews focusing on this emerging field and constructive perspectives are also urgent to be addressed. Herein recent advances in how to design efficient single-atom electrocatalysts for multi-electron reduction of CO₂ , with emphasis on strategies in regulating the interactions between active sites and key reaction intermediates, are summarized. Such interactions are crucial in designing active sites for optimizing the multi-electron reduction steps and maximizing the catalytic performance. Different design strategies including regulation of metal centers, single-atom alloys, non-metal single-atom catalysts, and tandem catalysts, are discussed accordingly. Finally, current challenges and future opportunities for deep electroreduction of CO₂ are proposed.

Electrochemical Reduction of CO2: A Review of Cobalt Based Catalysts for Carbon Dioxide Conversion to Fuels

Electrochemical CO2 reduction reaction (CO2RR) provides a promising approach to curbing harmful emissions contributing to global warming. However, several challenges hinder the commercialization of this technology, including high overpotentials, electrode instability, and low Faradic efficiencies of desirable products. Several materials have been developed to overcome these challenges. This mini-review discusses the recent performance of various cobalt (Co) electrocatalysts, including Co-single atom, Co-multi metals, Co-complexes, Co-based metal-organic frameworks (MOFs), Co-based covalent organic frameworks (COFs), Co-nitrides, and Co-oxides. These materials are reviewed with respect to their stability of facilitating CO2 conversion to valuable products, and a summary of the current literature is highlighted, along with future perspectives for the development of efficient CO2RR.

Promoting the conversion of CO2 to CH4via synergistic dual active sites

Carbon-based single-atom catalysts (SACs) have shown promising applications in the conversion of CO₂ into CO. However, the deep reduction process for the production of high-value hydrocarbons is largely limited due to the weak activation of CO. Herein, on the basis of first-principles calculations, a simple coordination regulation method of the active site is proposed to improve the conversion of CO₂. Taking NiN₄ as an example, by introducing heteroatoms (B, C, O, P, and S atoms), we reveal that NiN₃B can effectively capture *CO and further convert to CH₄ with an ultralow limiting potential of -0.42 V. The excellent catalytic performance is probably attributed to the formed synergistic dual active sites between non-metal B and metal Ni atoms. Moreover, NiN₃B can maintain good stability and the catalytic performance can be further enhanced by increasing the B-doping concentration. This work demonstrates that coordination regulation is an effective strategy to improve the performance of single-atom catalysts and paves a possible way to advance the development of non-Cu-based CO₂RR electrocatalysts for high-value hydrocarbon products.

Quantification of Active Site Density and Turnover Frequency: From Single-Atom Metal to Nanoparticle Electrocatalysts

Single-atom catalysts (SACs) featuring atomically dispersed metal cations covalently embedded in a carbon matrix show significant potential to achieve high catalytic performance in various electrocatalytic reactions. Although considerable advances have been achieved in their syntheses and electrochemical applications, further development and fundamental understanding are limited by a lack of strategies that can allow the quantitative analyses of their intrinsic catalytic characteristics, that is, active site density (SD) and turnover frequency (TOF). Here we show an in situ SD quantification method using a cyanide anion as a probe molecule. The decrease in cyanide concentration triggered by irreversible adsorption on metal-based active sites of a model Fe-N-C catalyst is precisely measured by spectrophotometry, and it is correlated to the relative decrease in electrocatalytic activity in the model reaction of oxygen reduction reaction. The linear correlation verifies the surface-sensitive and metal-specific adsorption of cyanide on Fe-N x sites, based on which the values of SD and TOF can be determined. Notably, this analytical strategy shows versatile applicability to a series of transition/noble metal SACs and Pt nanoparticles in a broad pH range (1-13). The SD and TOF quantification can afford an improved understanding of the structure-activity relationship for a broad range of electrocatalysts, in particular, the SACs, for which no general electrochemical method to determine the intrinsic catalytic characteristics is available.

Effect of Cobalt Speciation and the Graphitization of the Carbon Matrix on the CO2 Electroreduction Activity of Co/N-Doped Carbon Materials

The electroreduction of carbon dioxide is considered a key reaction for the valorization of CO₂ emitted in industrial processes or even present in the environment. Cobalt-nitrogen co-doped carbon materials featuring atomically dispersed Co-N sites have been shown to display superior activities and selectivities for the reduction of carbon dioxide to CO, which, in combination with H₂ (i.e., as syngas), is regarded as an added-value CO₂-reduction product. Such catalysts can be synthesized using heat treatment steps that imply the carbonization of Co-N-containing precursors, but the detailed effects of the synthesis conditions and corresponding materials' composition on their catalytic activities have not been rigorously studied. To this end, in the present work, we synthesized cobalt-nitrogen co-doped carbon materials with different heat treatment temperatures and studied the relation among their surface- and Co-speciation and their CO₂-to-CO electroreduction activity. Our results reveal that atomically dispersed cobalt-nitrogen sites are responsible for CO generation while suggesting that this CO-selectivity improves when these atomic Co-N centers are hosted in the carbon layers that cover the Co nanoparticles featured in the catalysts synthesized at higher heat treatment temperatures.

Carbon-Supported Single Metal Site Catalysts for Electrochemical CO2 Reduction to CO and Beyond

The electrochemical CO₂ reduction reaction (CO₂ RR) is a promising strategy to achieve electrical-to-chemical energy storage while closing the global carbon cycle. The carbon-supported single-atom catalysts (SACs) have great potential for electrochemical CO₂ RR due to their high efficiency and low cost. The metal centers' performance is related to the local coordination environment and the long-range electronic intercalation from the carbon substrates. This review summarizes the recent progress on the synthesis of carbon-supported SACs and their application toward electrocatalytic CO₂ reduction to CO and other C₁ and C₂ products. Several SACs are involved, including MN_x catalysts, heterogeneous molecular catalysts, and the covalent organic framework (COF) based SACs. The controllable synthesis methods for anchoring single-atom sites on different carbon supports are introduced, focusing on the influence that precursors and synthetic conditions have on the final structure of SACs. For the CO₂ RR performance, the intrinsic activity difference of various metal centers and the corresponding activity enhancement strategies via the modulation of the metal centers' electronic structure are systematically summarized, which may help promote the rational design of active and selective SACs for CO₂ reduction to CO and beyond.