The Origin of the Special Surface and Catalytic Chemistry of Ga-Rich Ni3Ga in the Direct Dehydrogenation of Ethane

Porous Single-crystalline Centimeter-sized α-Al2 O3 Monoliths for Selective and Durable Non-oxidative Dehydrogenation of Ethane

Alpha alumina (α-Al2 O3 ) are inert materials with outstanding thermal, chemical and mechanical stability. Herein, we fabricate porous single-crystalline (PSC) α-Al2 O3 monoliths at centimeter scale to endow them with high catalytic activity while maintaining their stability. We reduce PSC α-Al2 O3 monoliths to create oxygen vacancies in lattice and stabilize them by the ordered lattice to construct unsaturated Al-O coordination structures for enhancing the catalytic activity. The generation of oxygen vacancy at 18e wyckoff position contributes to the unsaturated Al-O coordination. As a case study, we demonstrate the outstanding performance with conversion (≈34 %) and selectivity (≈95 %) toward non-oxidative dehydrogenation of ethane to ethylene at 700 °C. We achieve the outstanding performance without obvious degradation even after a continuous operation over 1000 hours at 700 °C.

Proteomes reveal metabolic capabilities of Yarrowia lipolytica for biological upcycling of polyethylene into high-value chemicals

IMPORTANCE

Sustainable processes for biological upcycling of plastic wastes in a circular bioeconomy are needed to promote decarbonization and reduce environmental pollution due to increased plastic consumption, incineration, and landfill storage. Strain characterization and proteomic analysis revealed the robust metabolic capabilities of Yarrowia lipolytica to upcycle polyethylene into high-value chemicals. Significant proteome reallocation toward energy and lipid metabolisms was required for robust growth on hydrocarbons with n-hexadecane as the preferential substrate. However, an apparent over-investment in these same categories to utilize complex depolymerized plastic (DP) oil came at the expense of protein biosynthesis, limiting cell growth. Taken together, this study elucidates how Y. lipolytica activates its metabolism to utilize DP oil and establishes Y. lipolytica as a promising host for the upcycling of plastic wastes.

Catalytic Combustion of Propane over Ce-Doped Lanthanum Borate Loaded with Various 3d Transition Metals

Ce-doped LaBO3 (Ce0.05La0.95BO3) and a corresponding incorporation with 3d transition metals (TMs) were prepared and evaluated for eliminating propane. Our results showed the catalytic activity toward propane combustion has a close relationship with the loaded TMs, which promoted oxygen vacancies density and further enhanced the reduction and acidity of this material. This eventually led to 90% propane conversion at 718 K for a Cu-loaded Ce0.05La0.95BO3 catalyst. During 10 h of catalytic propane oxidation, the propane-elimination rate was maintained very well, with no degradation of the catalyst.

Ga+-Chabazite Zeolite: A Highly Selective Catalyst for Nonoxidative Propane Dehydrogenation

Ga-chabazite zeolites (Ga-CHA) have been found to efficiently catalyze propane dehydrogenation with high propylene selectivity (96%). In situ Fourier transform infrared spectroscopy and pulse titrations are employed to determine that upon reduction, surface Ga₂O₃ is reduced and diffuses into the zeolite pores, displacing the Brønsted acid sites and forming extra-framework Ga⁺ sites. This isolated Ga⁺ site reacts reversibly with H₂ to form GaH_x (2034 cm^-1) with an enthalpy of formation of ∼-51.2 kJ·mol^-1, a result supported by density functional theory calculations. The initial C₃H₈ dehydrogenation rates decrease rapidly (40%) during the first 100 min and then decline slowly afterward, while the C₃H₆ selectivity is stable at ∼96%. The reduction in the reaction rate is correlated with the formation of polycyclic aromatics inside the zeolite (using UV-vis spectroscopy) indicating that the accumulation of polycyclic aromatics is the main cause of the deactivation. The carbon species formed can be easily oxidized at 600 °C with complete recovery of the PDH catalytic properties. The correlations between GaH_x vs Ga/Al ratio and PDH rates vs Ga/Al ratio show that extra-framework Ga⁺ is the active center catalyzing propane dehydrogenation. The higher reaction rate on Ga⁺ than In⁺ in CHA zeolites, by a factor of 43, is the result of differences in the stabilization of the transition state due to the higher stability of Ga³⁺ vs In³⁺. The uniformity of the Ga⁺ sites in this material makes it an excellent model for the molecular understanding of metal cation-exchanged hydrocarbon interactions in zeolites.

Propane dehydrogenation over extra-framework In(i) in chabazite zeolites

Indium on silica, alumina and zeolite chabazite (CHA), with a range of In/Al ratios and Si/Al ratios, have been investigated to understand the effect of the support on indium speciation and its corresponding influence on propane dehydrogenation (PDH). It is found that In₂O₃ is formed on the external surface of the zeolite crystal after the addition of In(NO₃)₃ to H-CHA by incipient wetness impregnation and calcination. Upon reduction in H₂ gas (550 °C), indium displaces the proton in Brønsted acid sites (BASs), forming extra-framework In⁺ species (In-CHA). A stoichiometric ratio of 1.5 of formed H₂O to consumed H₂ during H₂ pulsed reduction experiments confirms the indium oxidation state of +1. The reduced indium is different from the indium species observed on samples of 10In/SiO₂, 10In/Al₂O₃ (i.e., 10 wt% indium) and bulk In₂O₃, in which In₂O₃ was reduced to In(0), as determined from the X-ray diffraction patterns of the product, H₂ temperature-programmed reduction (H₂-TPR) profiles, pulse reactor investigations and in situ transmission FTIR spectroscopy. The BASs in H-CHA facilitate the formation and stabilization of In⁺ cations in extra-framework positions, and prevent the deep reduction of In₂O₃ to In(0). In⁺ cations in the CHA zeolite can be oxidized with O₂ to form indium oxide species and can be reduced again with H₂ quantitatively. At comparable conversion, In-CHA shows better stability and C₃H₆ selectivity (∼85%) than In₂O₃, 10In/SiO₂ and 10In/Al₂O₃, consistent with a low C₃H₈ dehydrogenation activation energy (94.3 kJ mol⁻¹) and high C₃H₈ cracking activation energy (206 kJ mol⁻¹) in the In-CHA catalyst. A high Si/Al ratio in CHA seems beneficial for PDH by decreasing the fraction of CHA cages containing multiple In⁺ cations. Other small-pore zeolite-stabilized metal cation sites could form highly stable and selective catalysts for this and facilitate other alkane dehydrogenation reactions.

Indium-containing chabazite zeolites show better stability and C₃H₆ selectivity for propane dehydrogenation than In₂O₃, In/SiO₂ and In/Al₂O₃. Extra-framework In⁺ is identified as the stable active site upon reduction of an impregnated sample.

Fundamental understanding of the synthesis of well-defined supported non-noble metal intermetallic compound nanoparticles

Fundamental insights into the synthesis of model-like, supported, non-noble metal intermetallic compound nanoparticle catalysts with phase pure bulk and bulk-like 1st-atomic-layer particle surface composition.

High-loading Ga-exchanged MFI zeolites as selective and coke-resistant catalysts for nonoxidative ethane dehydrogenation

A high-loading Ga-exchanged MFI zeolite was developed for efficient ethane dehydrogenation. Its high catalytic performance is ascribed to both the low amount of Brønsted acid sites and the major formation of [GaH2]+ ions among isolated Ga hydrides.

Near 100% ethene selectivity achieved by tailoring dual active sites to isolate dehydrogenation and oxidation

Prohibiting deep oxidation remains a challenging task in oxidative dehydrogenation of light alkane since the targeted alkene is more reactive than parent substrate. Here we tailor dual active sites to isolate dehydrogenation and oxidation instead of homogeneously active sites responsible for these two steps leading to consecutive oxidation of alkene. The introduction of HY zeolite with acid sites, three-dimensional pore structure and supercages gives rise to Ni²⁺ Lewis acid sites (LAS) and NiO nanoclusters confined in framework wherein catalytic dehydrogenation of ethane occurs on Ni²⁺ LAS resulting in the formation of ethene and hydrogen while NiO nanoclusters with decreased oxygen reactivity are responsible for selective oxidation of hydrogen rather than over-oxidizing ethene. Such tailored strategy achieves near 100% ethene selectivity and constitutes a promising basis for highly selective oxidation catalysis beyond oxidative dehydrogenation of light alkane.

It is important but challenging to prohibit deep oxidation of alkene in oxidative dehydrogenation of light alkane. Here, dual active sites are tailored to isolate dehydrogenation and oxidation thus achieving superior ethene selectivity.

Dehydrogenation of light alkanes to mono-olefins

In the past several decades, light alkane dehydrogenation to mono-olefins, especially propane dehydrogenation to propylene has gained widespread attention and much development in the field of research and commercial application. Under suitable conditions, the supported Pt-Sn and CrO_x catalysts widely used in industry exhibit satisfactory dehydrogenation activity and selectivity. However, the high cost of Pt and the potential environmental problems of CrO_x have driven researchers to improve the coking and sintering resistance of Pt catalysts, and to find new non-noble metal and environment-friendly catalysts. As for the development of the reactor, it should be noted that low operation pressure is beneficial for improving the single-pass conversion, decreasing the amount of unconverted alkane recycled back to the reactor, and reducing the energy consumption of the whole process. Therefore, the research direction of reactor improvement is towards reducing the pressure drop. This review is aimed at introducing the characteristics of the dehydrogenation reaction, the progress made in the development of catalysts and reactors, and a new understanding of reaction mechanism as well as its guiding role in the development of catalyst and reactor.

Metal-based catalysts for the non-oxidative dehydrogenation of light alkanes to light olefins

This review provides an overview of metal-based catalysts, including Pt-, Pd-, Rh- and Ni-based bimetallic catalysts for non-oxidative dehydrogenation of light alkanes to olefins.

The impact of synthetic method on the catalytic application of intermetallic nanoparticles

Intermetallic alloy nanocrystals have emerged as a promising next generation of nanocatalyst, largely due to their promise of surface tunability. Atomic control of the geometric and electronic structure of the nanoparticle surface offers a precise command of the catalytic surface, with the potential for creating homogeneous active sites that extend over the entire nanoparticle. Realizing this promise, however, has been limited by synthetic difficulties, imparted by differences in parent metal crystal structure, reduction potential, and atomic size. Further, little attention has been paid to the impact of synthetic method on catalytic application. In this review, we seek to connect the two, organizing the current synthesis methods and catalytic scope of intermetallic nanoparticles and suggesting areas where more work is needed. Such analysis should help to guide future intermetallic nanoparticle development, with the ultimate goal of generating precisely controlled nanocatalysts tailored to catalysis.

Catalytic conversion of ethane to valuable products through non-oxidative dehydrogenation and dehydroaromatization

Chemical utilization of ethane to produce valuable chemicals has become especially attractive since the expanded utilization of shale gas in the United States and associated petroleum gas in the Middle East. Catalytic conversion to ethylene and aromatic hydrocarbons through non-oxidative dehydrogenation and dehydroaromatization of ethane (EDH and EDA) are potentially beneficial technologies because of their high selectivity to products. The former represents an attractive alternative to conventional thermal cracking of ethane. The latter can produce valuable aromatic hydrocarbons from a cheap feedstock. Nevertheless, further progress in catalytic science and technology is indispensable to implement these processes beneficially. This review summarizes progress that has been achieved with non-oxidative EDH and EDA in terms of the nature of active sites and reaction mechanisms. Briefly, platinum-, chromium- and gallium-based catalysts have been introduced mainly for EDH, including effects of carbon dioxide co-feeding. Efforts to use EDA have emphasized zinc-modified MFI zeolite catalysts. Finally, some avenues for development of catalytic science and technology for ethane conversion are summarized.

Cyclic redox scheme towards shale gas reforming: a review and perspectives

Alkanes are potential precursors to many value-added chemicals such as olefins and other petrochemicals.