Photocatalytic Coproduction of Deoxybenzoin and H2 through Tandem Redox Reactions

Synthesis of deoxybenzoins from β-alkoxy styrenes and arylboronic acids via palladium-catalyzed regioselective Heck-arylation reactions

Palladium-catalyzed synthesis of deoxybenzoin derivatives from styryl ethers and arylboronic acids is reported. The reaction proceeds under mild conditions in the presence of TEMPO and provides the desired products in good to excellent yields. Simple operation, broad substrate scope, and functional group tolerance are the salient features of the developed methodology.

Photoredox Coupling of CO2 Reduction with Benzyl Alcohol Oxidation over Ternary Metal Chalcogenides (ZnmIn2S3+m, m = 1-5) with Regulable Products Selectivity

Integrating photocatalytic CO2 reduction with selective benzyl alcohol (BA) oxidation in one photoredox reaction system is a promising way for the simultaneous utilization of photogenerated electrons and holes. Herein, ZnmIn2S3+m (m = 1-5) semiconductors (ZnIn2S4, Zn2In2S5, Zn3In2S6, Zn4In2S7, and Zn5In2S8) with various composition faults were synthesized via a simple hydrothermal method and used for effective selective dehydrocoupling of benzyl alcohol into high-value C-C coupling products and reduction of CO2 into syngas under visible light. The absorption edge of ZnmIn2S3+m samples shifted to shorter wavelengths as the atomic ratio of Zn/In was increased. The conduction band and valence band position can be adjusted by changing the Zn/In ratio, resulting in controllable photoredox ability for selective BA oxidation and CO2 reduction. For example, the selectivity of benzaldehyde (BAD) product was reduced from 76% (ZnIn2S4, ZIS1) to 27% (Zn4In2S7, ZIS4), while the selectivity of hydrobenzoin (HB) was increased from 22% to 56%. Additionally, the H2 formation rate on ZIS1 (1.6 mmol/g/h) was 1.6 times higher than that of ZIS4 (1.0 mmol/g/h), and the CO formation rate on ZIS4 (0.32 mmol/g/h) was three times higher than that of ZIS1 (0.13 mmol/g/h), demonstrating that syngas with different H2/CO ratios can be obtained by controlling the Zn/In ratio in ZnmIn2S3+m. This study provides new insights into unveiling the relationship of structure-property of ZnmIn2S3+m layered crystals, which are valuable for implementation in a wide range of environment and energy applications.

Alternatives to water oxidation in the photocatalytic water splitting reaction for solar hydrogen production

The photocatalytic water splitting process to produce H₂ is an attractive approach to meet energy demands while achieving carbon emission reduction targets. However, none of the current photocatalytic devices meets the criteria for practical sustainable H₂ production due to their insufficient efficiency and the resulting high H₂ cost. Economic viability may be achieved by simultaneously producing more valuable products than O₂ or integrating with reforming processes of real waste streams, such as plastic and food waste. Research over the past decade has begun to investigate the possibility of replacing water oxidation with more kinetically and thermodynamically facile oxidation reactions. We summarize how various alternative photo-oxidation reactions can be combined with proton reduction in photocatalysis to achieve chemical valorization with concurrent H₂ production. By examining the current advantages and challenges of these oxidation reactions, we intend to demonstrate that these technologies would contribute to providing H₂ energy, while also producing high-value chemicals for a sustainable chemical industry and eliminating waste.

Hydrogen Bonding Promotes Alcohol C-C Coupling

Photocatalytic C-C bond formation coupled with H₂ production provides a sustainable approach to producing carbon-chain-prolonged chemicals and hydrogen energy. However, the involved radical intermediates with open-shell electronic structures are highly reactive, experiencing predominant oxidative or reductive side reactions in semiconductors. Herein, we demonstrate that hydrogen bonding on the catalyst surface and in the bulk solution can inhibit oxidation and reverse reaction of α-hydroxyethyl radicals (αHRs) in photocatalytic dehydrocoupling of ethanol over Au/CdS. Intentionally added water forms surface hydrogen bonds with adsorbed αHRs and strengthens the hydrogen bonding between αHRs and ethanol while maintaining the flexibility of radicals in solution, thereby allowing for αHRs' desorption from the Au/CdS surface and their stabilization by a solvent. The coupling rate of αHR increases by 2.4-fold, and the selectivity of the target product, 2,3-butanediol (BDO), increases from 37 to 57%. This work manifests that nonchemical bonding interactions can steer the reaction paths of radicals for selective photocatalysis.

Na2S-Mediated One-Pot Selective Deoxygenation of α-Hydroxyl Carbonyl Compounds including Natural Products

A practical method for the deoxygenation of α-hydroxyl carbonyl compounds under mild reaction conditions is reported here. The use of cheap and easy-to-handle Na₂S·9H₂O as the reductant in the presence of PPh₃ and N-chlorosuccinimide (NCS) enables the selective dehydroxylation of α-hydroxyl carbonyl compounds, including ketones, esters, amides, imides and nitrile groups. The synthetic utility is demonstrated by the late-stage deoxygenation of bioactive molecule and complex natural products.

Revealing the Role of Electronic Doping for Developing Cocatalyst-Free Semiconducting Photocatalysts

Developing cocatalyst-free photocatalysts is highly desired because it could avoid the very slow interfacial electron transfer that makes photocatalytic photon utilization a dilemma. However, even in the optimal case, photocatalysts without the use of cocatalysts deliver comparable performance only for conventional construction. We demonstrate here that electronic doping not only provides catalytically active sites in cocatalyst-free photocatalysts but also plays certain additional roles. These electronic states can efficiently channel the trapped electrons to the semiconductor surface without suffering from time-consuming detrapping and can facilitate the extraction of photogenerated holes. These features endow our demonstrated tungsten-doped CdS with evident superiority in photocatalytic performance over conventional counterparts loaded with platinum cocatalysts.

Revealing the role of surface elementary doping in photocatalysis

Doping CdS with manganese can catalyze hole extraction and facilitate interfacial electron transfer to metallic cocatalyst. This reduces the activation energy for spatial separation of photogenerated charge carriers and enhances photon utilization.

Metal Sulfide Photocatalysts for Lignocellulose Valorization

Transition metal sulfides are an extraordinarily vital class of semiconductors with a wide range of applications in the photocatalytic field. A great number of recent advances in photocatalytic transformations of lignocellulosic biomass, the largest renewable carbon resource, into high-quality fuels and value-added chemicals has been achieved over metal sulfide semiconductors. Herein, the progress and breakthroughs in metal-sulfide-based photocatalytic systems for lignocellulose valorization with an emphasis on selective depolymerization of lignin and oxidative coupling of some important bioplatforms are highligted. The key issues that control reaction pathways and mechanisms are carefully examined. The functions of metal sulfides in the elementary reactions, including CO-bond cleavage, selective oxidations, CC coupling, and CH activation, are discussed to offer insights to guide the rational design of active and selective photocatalysts for sustainable chemistry. The prospects of sulfide photocatalysts in biomass valorization are also analyzed and briefly discussed.

Revealing and Facilitating the Rate-Determining Step for Efficient Sunlight-Driven Photocatalysis

Because of the complex composition of the apparent activation energy, the rate-determining step in a photocatalytic reaction like hydrogen evolution is still being explored even after sluggish oxygen evolution is replaced with efficient hole extraction. This issue severely limits the implementation of certain strategies like the synergistic thermal effect. Here, by developing a combined monitor method based on open-circuit potential decay, we demonstrate that semiconductor-cocatalyst interfacial electron transfer occurring on a decisecond to second time scale dominates photocatalytic hydrogen evolution. This time scale is approximately 6-12 orders of magnitude larger than the widely reported values of picoseconds to microseconds and is comparable to that predicted by Durrant et al. To improve photocatalytic hydrogen evolution, we manage to create more intermediate sites by electronically doping the semiconductor surface. This measure promotes semiconductor-cocatalyst interfacial electron transfer by charge recombination and makes the synergistic thermal effect very evident.

Cooperative Coupling of Oxidative Organic Synthesis and Hydrogen Production over Semiconductor-Based Photocatalysts

Merging hydrogen (H₂) evolution with oxidative organic synthesis in a semiconductor-mediated photoredox reaction is extremely attractive because the clean H₂ fuel and high-value chemicals can be coproduced under mild conditions using light as the sole energy input. Following this dual-functional photocatalytic strategy, a dreamlike reaction pathway for constructing C-C/C-X (X = C, N, O, S) bonds from abundant and readily available X-H bond-containing compounds with concomitant release of H₂ can be readily fulfilled without the need of external chemical reagents, thus offering a green and fascinating organic synthetic strategy. In this review, we begin by presenting a concise overview on the general background of traditional photocatalytic H₂ production and then focus on the fundamental principles of cooperative photoredox coupling of selective organic synthesis and H₂ production by simultaneous utilization of photoexcited electrons and holes over semiconductor-based catalysts to meet the economic and sustainability goal. Thereafter, we put dedicated emphasis on recent key progress of cooperative photoredox coupling of H₂ production and various selective organic transformations, including selective alcohol oxidation, selective methane conversion, amines oxidative coupling, oxidative cross-coupling, cyclic alkanes dehydrogenation, reforming of lignocellulosic biomass, and so on. Finally, the remaining challenges and future perspectives in this flourishing area have been critically discussed. It is anticipated that this review will provide enlightening guidance on the rational design of such dual-functional photoredox reaction system, thereby stimulating the development of economical and environmentally benign solar fuel generation and organic synthesis of value-added fine chemicals.

Accurate exploration of synergistic thermal effect: Low-grade-heat-promoted charge recombination coupled with spherical incidence for efficient sunlight-driven photocatalysis

The major objective of the emerging photo-thermo-catalysis is using waste heat to boost the photocatalytic reaction, especially that powered by sunlight. Because of the complex composition of light-intensity-dependent apparent activation energies, the issue that principally hinders the synergistic thermal effect to photocatalysis has hardly been accurately explored. In this work, by virtue of mutual match of theoretical simulation and experimental behaviors, we demonstrate that photocatalytic reaction rates exhibit a sensitively positive correlation with temperature under weak illumination, in which charge recombination predominates the rate-determining step of semiconductor-cocatalyst interfacial electron transfer. Under high-intensity irradiation, however, the aggravation of charge leakage inherently accompanied by thermionic emission severely weakens the synergistic thermal effect or even slows down the reaction by raising the temperature. Inspired by these, we manage to maximize the photocatalytic solar utilization by spherical incidence of sunlight with the assistance of low-grade heat.

Visible-Light Acceleration of H2 Evolution from Aqueous Solutions of Inorganic Hydrides Catalyzed by Gold-Transition-Metal Nanoalloys

Production of hydrogen (H₂) upon hydrolysis of inorganic hydrides potentially is a key step in green energy production. We find that visible-light irradiation of aqueous solutions of ammonia-borane (AB) or NaBH₄ containing "click"-dendrimer-stabilized alloyed nanocatalysts composed of nanogold and another late transition-metal nanoparticle (LTMNP) highly enhances catalytic activity for H₂ generation while also inducing alloy to Au core@M shell nanocatalyst restructuration. In terms of visible-light-induced acceleration of H₂ production from both AB and NaBH₄, the Au₁Ru₁ alloy catalysts show the most significant light-boosting effect. Au-Rh and Au-PtNPs are also remarkable with total H₂ release time from AB and NaBH₄ down to 1.3 min at 25 °C (AuRh), 3 times less than in the dark, and Co is the best earth-abundant metal alloyed with nanogold. This boosting effect is explained by the transfer of plasmon-induced hot electron from the Au atoms to the LTMNP atoms facilitating water O-H oxidative addition on the LTMNP surface, as shown by the large primary kinetic isotope effect k_H/k_D upon using D₂O obtained for both AB and NaBH₄. The second simultaneous and progressive effect of visible-light irradiation during these reactions, alloy to Au core@M shell restructuration, enhances the catalytic activity in the recycling, because, in the resulting Au core@M shell, the surface metal (such as Ru) is much more active than the original Au-containing alloy surface in dark reactions. There is no light effect on the rate of hydrogen production for the recycled nanocatalyst because of the absence of Au on the NP surface, but it is still very efficient in hydrogen release during four cycles because of the initial light-induced restructuration, although it is slightly less efficient than the original nanoalloy in the presence of light. The dendritic triazole coordination on each LTMNP surface appears to play a key role in these remarkable light-induced processes.

Photocatalytic transformations of lignocellulosic biomass into chemicals

This review highlights recent advances in photocatalytic transformations of lignocellulosic biomass (polysaccharides and lignin) into chemicals (in particular organic oxygenates).