Porous Ni1–xCuxO Nanowire Arrays as Noble-Metal-Free High-Performance Catalysts for Ammonia-Borane Electrooxidation

Boron/nitrogen-trapping and regulative electronic states around Ru nanoparticles towards bifunctional hydrogen production

Developing a straightforward and general strategy to regulate the surface microenvironment of a carbon matrix enriched with N/B motifs for efficient atomic utilization and electronic state of metal sites in bifunctional hydrogen production via ammonia-borane hydrolysis (ABH) and water electrolysis is a persistent challenge. Herein, we present a simple, green, and universal approach to fabricate B/N co-doped porous carbons using ammonia-borane (AB) as a triple functional agent, eliminating the need for hazardous and explosive functional agents and complicated procedures. The pyrolysis of AB induces the regulation of the surface microenvironment of the carbon matrix, leading to the formation of abundant surface functional groups, defects, and pore structures. This regulation enhances the efficiency of atom utilization and the electronic state of the active component, resulting in improved bifunctional hydrogen evolution. Among the catalysts, B/N co-doped vulcan carbon (Ru/BNC) with 2.1 wt% Ru loading demonstrates the highest performance in catalytic hydrogen production from ABH, achieving an ultrahigh turnover frequency of 1854 min-1 (depending on the dispersion of Ru). Furthermore, this catalyst shows remarkable electrochemical activity for hydrogen evolution in alkaline water electrolysis with a low overpotential of 31 mV at 10 mA cm-2. The present study provides a simple, green, and universal method to regulate the surface microenvironment of various carbons with B/N modulators, thereby adjusting the atomic utilization and electronic state of active metals for enhanced bifunctional hydrogen evolution.

Double-Heterostructured Nickel Phosphate-Phosphides as High-Activity Electrocatalyst for Ammonia Borane Electrooxidation

The direct electrooxidation reaction of ammonia borane (ABOR) as the anodic reaction of direct ammonia borane fuel cells (DABFCs) is greatly dependent on the properties of electrocatalysts. Both the active sites and charge/mass transfer characteristics are the key to promoting the processes of kinetics and thermodynamics, which can further improve the electrocatalytic activity. Hence, the catalyst double-heterostructured Ni₂ P/Ni₂ P₂ O₇ /Ni₁₂ P₅ (d-NPO/NP) with the optimistic redistribution of electrons and active sites is prepared for the first time. The d-NPO/NP-750 catalyst obtained after pyrolysis at 750 °C shows the outstanding electrocatalytic activity toward ABOR with an onset potential of -0.329 V vs RHE which is better than all the published catalysts. The density functional theory (DFT) computations illustrate that the Ni₂ P₂ O₇ /Ni₂ P acts as the activity enhancement heterostructure with a high d-band center (-1.60 eV) and the low activation energy barrier, while the Ni₂ P₂ O₇ /Ni₁₂ P₅ acts as the conductivity enhancement heterostructure with the highest density of valence electrons.

A Petal-like Structured NiCuOOH-NF Electrode by a Sonochemical Combined with the Electrochemical Method for Ammonia Oxidation Reaction

Direct electrochemical oxidation, as an economical and efficient method, has recently received increasing attention for ammonia-nitrogen wastewater treatment. Developing a low-cost, efficient catalytic electrode is the key to solve the problem of sluggish ammonia oxidation reaction (AOR) kinetics. In this study, a three-dimensional (3D) Ni foam electrode coated with NiCuOOH petal-like cluster structures was prepared using a simple sonochemical method combined with a surface electrochemical reconstruction strategy. This structure has a large surface area and abundant NiCuOOH active sites, giving a good premise for extraordinary electrocatalytic activity of AOR. The results show that the maximum current density for AOR reaches 97.8 mA cm−2 at 0.60 V vs. saturated calomel electrode (SCE). Additionally, 96.53% of NH4+-N removal efficiency and 63.12% of TN removal efficiency were acquired in the electrolysis system based on the NiCuOOH-NF electrode, as well as a good stability for at least 24 h. It is a promising flow-through anode for the clean treatment of ammonia-nitrogen wastewater.

Modulating Hydroxyl-Rich Interfaces on Nickel-Copper Double Hydroxide Nanotyres to Pre-activate Alkaline Ammonia Oxidation Reactivity

The surface hydroxyl groups of Ni_x Cu_1-x (OH)₂ play a crucial role in governing their conversion efficiency into Ni_x Cu_1-x O_x (OH)_2-x during the electro-chemical pre-activation process, thus affecting the integral ammonia oxidation reaction (AOR) reactivity. Herein, the rational design of hierarchical porous NiCu double hydroxide nanotyres (NiCu DHTs) was reported for the first time by considering hydroxyl-rich interfaces to promote pre-activation efficiency and intrinsic structural superiority (i.e., annulus, porosity) to accelerate AOR kinetics. A systematic investigation of the structure-function relationship was conducted by manipulating a series of NiCu DHs with tunable intercalations and morphologies. Remarkably, the NiCu DHTs exhibit superior AOR activity (onset potential of 1.31 V with 7.52 mA cm^-2 at 1.5 V) and high ammonia sensitivity (detection limit of 9 μm), manifesting one of the best non-noble metal AOR electrocatalysts and electro-analytical electrodetectors. This work deepens the understanding of the crucial role of surface hydroxyl groups on determining the catalytic performance in alkaline medium.

Promotional effect of Mn-doping on the catalytic performance of NiO sheets for the selective oxidation of styrene

The direct oxidation of styrene into high-value chemicals under mild reaction conditions remains a great challenge in both academia and industry. Herein, we report a successful electronic structure modulation of intrinsic NiO sheets via Mn-doping towards the oxidation of styrene. By doping NiO with only a small content of Mn (Mn/Ni atomic ratio of 0.030), a 75.0% yield of STO can be achieved under the optimized reaction conditions, which is 2.13 times higher than that of the pure NiO. In addition, the catalyst exhibits robust stability and good recycling performance. The performance enhancement originates from the synergistic effect regarding the abundant Ni(II) species, the rich oxygen vacancy sites and the large amount of surface redox centers. This work provides new findings of the elemental-doping-induced multifunctionality in designing powerful catalysts for the efficient and selective oxidation of styrene and beyond.

Ammonia Borane: An Extensively Studied, Though Not Yet Implemented, Hydrogen Carrier

Ammonia borane H3N−BH3 (AB) was re-discovered, in the 2000s, to play an important role in the developing hydrogen economy, but it has seemingly failed; at best it has lagged behind. The present review aims at analyzing, in the context of more than 300 articles, the reasons why AB gives a sense that it has failed as an anodic fuel, a liquid-state hydrogen carrier and a solid hydrogen carrier. The key issues AB faces and the key challenges ahead it has to address (i.e., those hindering its technological deployment) have been identified and itemized. The reality is that preventable errors have been made. First, some critical issues have been underestimated and thereby understudied, whereas others have been disproportionally considered. Second, the potential of AB has been overestimated, and there has been an undoubted lack of realistic and practical vision of it. Third, the competition in the field is severe, with more promising and cheaper hydrides in front of AB. Fourth, AB has been confined to lab benches, and consequently its technological readiness level has remained low. This is discussed in detail herein.