Controlling and Stabilization of Ru Nanoparticles by Tuning the Nitrogen Content of the Support for Enhanced H2 Production through Aqueous-Phase Reforming of Glycerol

Aqueous Phase Reforming over Platinum Catalysts on Doped Carbon Supports: Exploring Platinum-Heteroatom Interactions

A series of platinum catalysts supported on carbon nanofibers with various heteroatom dopings were synthesized to investigate the effect of the local platinum environment on the catalytic activity and selectivity in aqueous phase reforming (APR) of ethylene glycol (EG). Typical carbon dopants such as oxygen, nitrogen, sulfur, phosphorus, and boron were chosen based on their ability to bring acidic or basic functional groups to the carbon surface. In situ X-ray absorption spectroscopy (XAS) was used to identify the platinum oxidation state and platinum species formed during APR of EG through multivariate curve resolution alternating least-squares analysis, observing differences in activity, selectivity, and platinum local environment among the catalysts. The platinum-based catalyst on the nitrogen-doped carbon support demonstrated the most favorable properties for H2 production due to high Pt dispersion and basicity (H2 site time yield 22.7 h-1). Direct Pt-N-O coordination was identified by XAS in this catalyst. The sulfur-doped catalyst presented Pt-S contributions with the lowest EG conversion rate and minimal production of the gas phase components. Boron and phosphorus-doped catalysts showed moderate activity, which was affected by low platinum dispersion on the carbon support. The phosphorus-doped catalyst showed preferential selectivity to alcohols in the liquid phase, associated with the presence of acid sites and Pt-P contributions observed under APR conditions.

Nitrogen-doped ordered mesoporous carbon supported ruthenium metallic nanoparticles: Opportunity for efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran by catalytic transfer hydrogenation

One of the most promising solutions to the current energy crisis is an efficient catalytic transformation of abundant low-cost renewable raw biomass into high-quality biofuel. Herein, a highly effective catalyst was constructed systematically for the selective synthesis of 2,5-dimethylfuran (DMF) biofuel from biomass-derived 5-hydroxymethylfurfural (HMF) via green catalytic transfer hydrogenolysis (CTH) using a nitrogen-doped ordered mesoporous carbon (N-CMK-1) decorated ruthenium (Ru)-based catalyst in i-propanol as hydrogen source. The structures and properties of different catalysts were characterized by different characterization techniques such as FTIR, XRD, N2-sorption, CO2-sorption, TGA, TEM, ICP-AES, CHNO analysis, and acid-base back titration. A complete HMF conversion with a high DMF yield of 88% was achieved under optimized reaction conditions. Regarding substrate conversion and product yield, the influence of reaction temperature, time, and hydrogen donors was thoroughly investigated. The nitrogen-promoted carbon support enhanced the dispersion of Ru due to the formation of appropriate basic site density which could efficiently promote the activation of alcohol hydroxyl in i-propanol and subsequent release of active hydrogen species. In the meantime, highly dispersed surface Ru nanoparticles (NPs) were beneficial for hydrogen transfer and activation of both carbonyl and hydroxyl groups in HMF. Moreover, Arrhenius kinetic analysis was studied by identifying 5-methyl furfural (5-MF) and 2,5-bishydroxymethylfuran (BHMF) as two key intermediates that dominate a distinct reaction pathway during hydrogenolysis of HMF to DMF via CTH. Furthermore, high stability without obvious loss of activity after three consecutive cycles was observed in a fabricated N-CMK-1 decorated Ru-based catalyst as a result of superior metal-support interaction and the mesoporous framework nature of the catalyst. These findings would not only offer a robust catalyst synthetic approach but also open a new avenue for the exploitation of biomass to specialty chemicals and advanced biofuels.

Selective electrocatalytic hydrogenation of lignocellulose-derived 5-hydroxymethylfurfural with superior productivities

Recently, valorization of biomass to value-added chemicals has drawn increasing attention due to carbon neutrality and sustainability. 5-Hydroxymethylfurfural is an important lignocellulose-derived biomass molecule. Herein, we have demonstrated the efficient electrocatalytic hydrogenation of 5-hydroxymethylfurfural to value-added 2,5-bis(hydroxymethyl)furan. An optimized electrolyzer with a highly electrolyte-permeable Pd cathode well balanced the selectivity, faradaic efficiency, and productivity. We have achieved high selectivity (97%) and faradaic efficiency (72%) at 50 mA cm-2 current density, and a record high productivity of 0.923 mmol cm-2·h-1 at 100 mA cm-2 current density, ∼2 times advanced compared with the best productivity in prior reports. We applied in situ infrared reflection-absorption spectroscopy to investigate the electrode-potential-dependent reaction pathways and mechanism, confirming that the highly selective hydrogenation of HMF is due to the tilted adsorption geometry through carbonyl group bonding to the surface of electrode. This work offers an opportunity for the sustainable electrocatalytic valorization of renewable lignocellulose-derived biomass with superior productivities approaching industrial level.

Production of Propanediols through In Situ Glycerol Hydrogenolysis via Aqueous Phase Reforming: A Review

Production of 1,2-propanediol and 1,3-propanediol are identified as methods to reduce glycerol oversupply. Hence, glycerol hydrogenolysis is identified as a thermochemical conversion substitute; however, it requires an expensive, high-pressure pure hydrogen supply. Studies have been performed on other potential thermochemical conversion processes whereby aqueous phase reforming has been identified as an excellent substitute for the conversion process due to its low temperature requirement and high H2 yields, factors which permit the process of in-situ glycerol hydrogenolysis which requires no external H2 supply. Hence, this manuscript emphasizes delving into the possibilities of this concept to produce 1,2-propanediol and 1,3-propanediol without “breaking the bank” with expenses. Various heterogenous catalysts of aqueous phase reforming (APR) and glycerol hydrogenolysis were identified, whereby the combination of a noble metal, support, and dopant with a good amount of Brønsted acid sites are identified as the key factors to ensure a high yield of 1,3-propanediol. However, for 1,2-propanediol, a Cu-based catalyst with decent basic support is observed to be the key for good yield and selectivity of product. The findings have shown that it is possible to produce high yields of both 1,2-propanediol and 1,3-propanediol via aqueous phase reforming, specifically 1,2-propanediol, for which some of the findings achieve better selectivity compared to direct glycerol hydrogenolysis to 1,2-propanediol. This is not the case for 1,3-propanediol, for which further studies need to be conducted to evaluate its feasibility.

Efficient Production of Adipic Acid by a Two-Step Catalytic Reaction of Biomass-Derived 2,5-Furandicarboxylic Acid

Efficient catalytic ring-opening coupled with hydrogenation is a promising but challenging reaction for producing adipic acid (AA) from 2,5-furan dicarboxylic acid (FDCA). In this study, AA synthesis is carried out in two steps from FDCA via tetrahydrofuran-2,5-dicarboxylic acid (THFDCA) over a recyclable Ru/Al2 O3 and an ionic liquid, [MIM(CH2 )4 SO3 H]I (MIM=methylimidazolium) to deliver 99 % overall yield of AA. Ru/Al2 O3 is found to be an efficient catalyst for hydrogenation and hydrogenolysis of FDCA to deliver THFDCA and 2-hydroxyadipic acid (HAA), respectively, where ruthenium is more economically viable than well-known palladium or rhodium hydrogenation catalysts. H2 chemisorption shows that the alumina phase strongly affects the interaction between Ru nanoparticles (NPs) and supports, resulting in materials with high dispersion and small size of Ru NPs, which in turn are responsible for the high conversion of FDCA. An ionic liquid system, [MIM(CH2 )4 SO3 H]I is applied to the hydrogenolysis of THFDCA for AA production. The [MIM(CH2 )4 SO3 H]I exhibits superior activity, enables simple product isolation with high purity, and reduces the severe corrosion problems caused by the conventional hydroiodic acid catalytic system.

Overturning CO2 Hydrogenation Selectivity with High Activity via Reaction-Induced Strong Metal-Support Interactions

Encapsulation of metal nanoparticles by support-derived materials known as the classical strong metal-support interaction (SMSI) often happens upon thermal treatment of supported metal catalysts at high temperatures (≥500 °C) and consequently lowers the catalytic performance due to blockage of metal active sites. Here, we show that this SMSI state can be constructed in a Ru-MoO₃ catalyst using CO₂ hydrogenation reaction gas and at a low temperature of 250 °C, which favors the selective CO₂ hydrogenation to CO. During the reaction, Ru nanoparticles facilitate reduction of MoO₃ to generate active MoO_3-x overlayers with oxygen vacancies, which migrate onto Ru nanoparticles' surface and form the encapsulated structure, that is, Ru@MoO_3-x. The formed SMSI state changes 100% CH₄ selectivity on fresh Ru particle surfaces to above 99.0% CO selectivity with excellent activity and long-term catalytic stability. The encapsulating oxide layers can be removed via O₂ treatment, switching back completely to the methanation. This work suggests that the encapsulation of metal nanocatalysts can be dynamically generated in real reactions, which helps to gain the target products with high activity.

Recovery and utilization of crude glycerol, a biodiesel byproduct

Biodiesel production has increased significantly in the past decade because it has been demonstrated to be a viable alternative and renewable fuel. Consequently, the production of crude glycerol, the main byproduct of the transesterification of lipids to biodiesel, has risen as well. Therefore, the effective recovery and utilization of crude glycerol can provide biodiesel with additional value. In this review, we first summarized the state-of-the-art progress on crude glycerol recovery and purification. Subsequently, numerous approaches have been reviewed for the utilization of crude glycerol, including use as animal feeds, for combustion, anaerobic fermentation, and chemical conversion. Finally, an extensive discussion and outlook is presented in relation to the techniques and processes in the chemical conversion of crude glycerol.

In this review, we summarize the latest technologies for the recovery and purification of crude glycerol and applications of crude glycerol, with focus on its chemical conversion.

Electronic Ni–N interaction enhanced reductive amination on an N-doped porous carbon supported Ni catalyst

Reductive amination on Ni/N-doped porous carbon catalyst was enhanced by the formation of Ni–Nx sites and the electronic interaction of N and Ni species, which promoted the reductive amination of CO bonds and reduced the activation energy.

Active and Recyclable Gold Metal Nanoparticles Catalyst Supported on Nitrogen-Doped Mesoporous Carbon for Chemoselective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol

Several supported gold metal catalysts with different Au nanoparticles sizes were prepared and evaluated for the chemoselective hydrogenation of cinnamaldehyde (CA) to cinnamyl alcohol (CAL). To investigate the structure-activity relationship, stability of catalyst, heterogeneity and recyclability, the structural characteristics of materials and Au catalysts (fresh and spent catalysts) were studied by employing variety of physico-chemical techniques. The interrelationship among Au nanoparticles size (nm) with turnover frequency (h^-1 ) of Au catalysts has also been explored. Among the various Au catalysts tested, nitrogen-doped mesoporous carbon (NMC) supported Au catalyst having homogeneously dispersed (78.8%) Au nanoparticles (1.6 nm) synthesized by sol-immobilization method (Au-NMC-SI) demonstrated improved catalytic activity affording 78% CAL selectivity and 94.2% CA conversion without using any promoter. Moreover, Au-NMC-SI catalyst exhibited good recyclability and stability. The catalyst synthesis approach described in this investigation opens up a novel strategy for the design of highly efficient metal nano-catalysts supported on NMC materials.

Monolayer Janus Te2Se-based gas sensor to detect SO2 and NOx: a first-principles study

In this study, the adsorption of gas molecules, such as O₂, NH₃, CO, CO₂, H₂O, NO_x (x = 1, 2) and SO₂, on Janus Te₂Se monolayer has been investigated by means of density functional theory (DFT) calculations.

Single atomic site catalysts: synthesis, characterization, and applications

Single atomic site catalysts (SASCs) have attracted great attention in heterogenous catalysis due to their maximized atomic utilization and unique electronic structure. This feature article summarizes the recent contributions of the authors in the synthesis, characterization, and applications of SASCs. Firstly, we disclose the tricks of our recent progress in the synthesis of SASCs, including impregnation of metal precursors on defect-rich supports, pyrolysis of polymer-encapsulated metals and isolation of contiguous atoms by alloying. Then, we show several key characterization technologies to identify the geometric and electronic structure of SASCs, and reveal the advantages and disadvantages of these characterization technologies. Finally, the applications of the SASCs in heterogenous catalysis are presented, which are classified into electrocatalysis and thermocatalysis, and the structure-function relationships are disclosed.