Optimizing Strategy for Enhancing the Stability and 99TcO4 - Sequestration of Poly(ionic liquids)@MOFs Composites

Flexible filament winding strategy to prepare COF@polyionic liquid-coated fibers for non-selective exclusion of macromolecules in electro-enhanced solid-phase microextraction

BACKGROUND

Accurate quantitative analysis of small molecule metabolites in biological samples is of great significance. Hydroxypolycyclic aromatic hydrocarbons (OH-PAHs) are metabolic derivatives of emerging pollutants, reflecting exposure to polycyclic aromatic hydrocarbons (PAHs). Macromolecules such as proteins and enzymes in biological samples will interfere with the accurate quantification of OH-PAHs, making direct analysis impossible, requiring a series of complex treatments such as enzymatic hydrolysis. Therefore, the development of matrix-compatible fiber coatings that can exclude macromolecules is of great significance to improve the ability of solid-phase microextraction (SPME) technology to selectively quantify small molecules in complex matrices and achieve rapid and direct analysis.

RESULTS

We have developed an innovative coating with a stable macromolecular barrier using electrospinning and flexible filament winding (FW) technologies. This coating, referred to as the hollow fibrous covalent organic framework@polyionic liquid (F-COF@polyILs), demonstrates outstanding conductivity and stability. It accelerates the adsorption equilibrium time (25 min) for polar OH-PAHs through electrically enhanced solid-phase microextraction (EE-SPME) technology. Compared to the powder form, F-COF@polyILs coating displays effective non-selective large-size molecular sieving. Combining gas chromatography-tandem triple quadrupole mass spectrometry (GC-MS/MS), we have established a simple, efficient quantitative analysis method for OH-PAHs with a low detection limit (0.008-0.05 ng L-1), wide linear range (0.02-1000 ng L-1), and good repeatability (1.0%-7.3 %). Experimental results show that the coated fiber exhibits good resistance to matrix interference (2.5%-16.7 %) in complex biological matrices, and has been successfully used for OH-PAHs analysis in human urine and plasma.

SIGNIFICANCE

FW technology realizes the transformation of the traditional powder form of COF in SPME coating to a uniform non-powder coating, giving its ability to exclude large molecules in complex biological matrices. A method for quantitatively detecting OH-PAHs in real biological samples was also developed. Therefore, the filament winding preparation method for F-COF@polyILs coated fibers, along with fibrous COFs' morphology control, has substantial implications for efficiently extracting target compounds from complex matrices.

Alkyl modified cationic COFs for preferential trapping of charge dispersed perrhenate: Synergistic hydrophobicity and anion-recognition effects

Charge dispersed oxoanionic pollutants (such as TcO4- and ReO4-) with low hydrophilicity are typically difficult to be preferentially extracted. Recently, cationic covalent organic frameworks (COFs) have received considerable attention for anions trapping. Two cationic COFs, denoted as Tp-S and Tp-D, were synthesized by incorporating ethyl and cyclic alkylated diquats into 2,2'-bipyridine-based COF. A synergistic effect of hydrophobic channel and anion-recognition sites were achieved by branched chains, which effectively surmounted the Hofmeister bias. Both Tp-S and Tp-D exhibited raising removal performance for surrogate ReO4- at high acidity with adsorption capacities of 435.6 and 291.4 mg g-1, respectively. Obvious variations caused by side chains were displayed in microstructures and adsorption performance. Specially, compared with Tp-D, Tp-S demonstrated desirable priority in uptake capacity and selectivity. In a real-scenario experiment, Tp-S could remove 72.8 % of ReO4- in a simulated Hanford LAW stream, which was attributed to the spatial effects and charge distribution arising from the open and flexible side chains of Tp-S. Otherwise, the rigid cyclic chains endowed pyridine-base Tp-D material an unprecedented alkaline stability. Spectra and theoretical calculations revealed a mechanism of preferential capture based on electrostatic interaction and hydrogen bonding between charge dispersed ReO4-/TcO4- and Tp-S/Tp-D. This work provides an innovative perspective to tailored materials for the treatment of oxoanionic contaminants.

Post-Modification of a Robust Covalent Organic Framework for Efficient Sequestration of 99 TcO4 - /ReO4. Chemistry 2023;29:e202302168. [PMID: 37534580 DOI: 10.1002/chem.202302168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Nuclear industry spent fuel reprocessing and some radioactive contamination sites often involve high acidity and salinity environments. Currently developed and reported sorbents in 99 TcO4 - sequestration from the nuclear waste are unstable and show low adsorption efficiency in harsh conditions. To address this issue, we developed a post-synthetic modification strategy by grafting imidazole-based ionic liquids (ILs) onto the backbone of covalent organic framework (COF) via vinyl polymerization. The resultant COF-polyILs sorbent exhibits fast adsorption kinetics (<5 min) and good sorption capacity (388 mg g-1 ) for ReO4 - (a nonradioactive surrogate of 99 TcO4 - ). Outstandingly, COF-polyILs composite shows superior ReO4 - removal even under highly acidic conditions and in the presence of excess competing ions of Hanford low-level radioactive waste stream, benefiting from the stable covalent bonds between the COF and polyILs, mass of imidazole rings, and hydrophobic pores in COF.

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Superiority of the Supramolecular Halogen Bond Receptor over Its H-Bond Analogue toward the Efficient Extraction of Perrhenate from Water

A halogen bond-based water-soluble tetrapodal iodoimidazolium receptor, (L-I)(4Br), exhibited a high degree of efficiency (∼96%) in extracting ReO₄^- from 100% aqueous medium within a wide range of concentrations and of pH values along with excellent reusability. The solid-state X-ray diffraction study showed the trapping of ReO₄^- by (L-I)(4Br) via the Re-O····I halogen bonding interaction. XPS studies also suggested the interaction between I and ReO₄^- through polarization of the electron density of I atoms by ReO₄^-. (L-I)(4Br) is found to be capable of retaining its high extraction efficiency in the presence of competing anions such as F^-, Cl^-, I^-, SO₄^2-, H₂PO₄^-, CO₃^2-, NO₃^-, BF₄^-, ClO₄^-, Cr₂O₇^2-, and a mixture of these anions. Interestingly, (L-I)(4Br) was found to be superior in ReO₄^- extraction as compared to its hydrogen-bond donor analogue, (L-H)(4Br), as confirmed by a series of control experiments and theoretical calculations. Our synthesized dipodal and tripodal halogen bond donor receptors and their H-analogues validated the superiority of these classes of supramolecular halogen bond donor receptors over their hydrogen-bond analogues. (L-I)(4Br) also showed superior practical applicability in terms of the removal of ReO₄^- at anion concentrations as low as ∼100 ppm, which was a major shortcoming of (L-H)(4Br).

CTAB assisted evaporation-induced self-assembly to construct imidazolium-based hierarchical porous covalent organic polymers for ReO4-/TcO4- removal

Evaporation-induced self-assembly method (EISA) was a facile and reliable method to synthesize porous materials. Herein, we report a kind of hierarchical porous ionic liquid covalent organic polymers (HPnDNH₂) under cetyltrimethylammonium bromide (CTAB) assisted by EISA for ReO₄^-/TcO₄^- removal. Unlike covalent organic frameworks (COFs), which usually needed to be prepared in a closed environment or with a long reaction time, HPnDNH₂ in this study was prepared within 1 h in an open environment. It was worth noting that CTAB not only served as a soft template for forming pore, but also induced ordered structure, which was verified by SEM, TEM, and Gas sorption. Benefit from its hierarchical pore structure, HPnDNH₂ exhibited higher adsorption capacity (690.0 mg g^-1 for HP1DNH₂ and 808.7 mg g^-1 for HP1.5DNH₂) and faster kinetics for ReO₄^-/TcO₄^- than 1DNH₂ (without employing CTAB). Additionally, the material used to remove TcO₄^- from alkaline nuclear waste was seldom reported, because combining features of alkali resistance and high uptake selectivity was not easy to achieve. In this study, in the case of HP1DNH₂, it displayed outstanding adsorption efficiency toward aqueous ReO₄^-/TcO₄^- in 1 mol L^-1 NaOH solution (92%) and simulated Savannah River Site High-level waste (SRS HLW) melter recycle stream (98%), which could be a potentially excellent nuclear waste adsorbing material.

Ultra-stable 3D pyridinium salt-based polymeric network nanotrap for selective 99TcO4-/ReO4- capture via hydrophobic and steric engineering

Selective capture of radioactive ⁹⁹TcO₄^- from highly alkaline nuclear waste is highly desirable for environmental remediation and waste disposal. However, the combined features of adsorbents with excellent chemical stability and high capture selectivity for ⁹⁹TcO₄^- have not yet been achieved. Herein, we report an ultra-stable 3D pyridinium salt-based polymeric network (TMP-TBPM) nanotrap with remarkable radiation, acid and base stability for selective capture of ReO₄^- via hydrophobic engineering and steric hindrance, a non-radioactive surrogate of ⁹⁹TcO₄^-. The batch capture experiments show that TMP-TBPM has high capture capacity (918.7 mg g^-1) and fast sorption kinetics (94.3 % removal in 2 min), which can be attributed to the high density of pyridinium salt-based units on the highly accessible pore channels of 3D interconnected low-density skeleton. In addition, the introduction of abundant alkyl and tetraphenylmethane units into the 3D framework not only greatly enhanced the hydrophobicity and stability of TMP-TBPM, but also significantly improved the affinity toward ⁹⁹TcO₄^-/ReO₄^-, enabling reversible and selective capture of ⁹⁹TcO₄^-/ReO₄^- even under highly alkaline conditions. This study exhibits the great potential of 3D pyridinium salt-based polymeric network nanotrap for ⁹⁹TcO₄^-/ReO₄^- capture from highly alkaline nuclear waste, providing a new strategy to construct high-performance cationic polymeric sorbents for radioactive wastewater treatment.

Halogen microregulation in metal-organic frameworks for enhanced adsorption performance of ReO4-/TcO4. JOURNAL OF HAZARDOUS MATERIALS 2023;446:130744. [PMID: 36630874 DOI: 10.1016/j.jhazmat.2023.130744]

Effective and selective removal of ⁹⁹TcO₄^-, one of the most nuisance radionuclides in nuclear waste, is highly desirable but remains a significant challenge. Herein, two isostructural MOFs, NCU-3-X (X = Cl, Br) were constructed by ZnX₂ coordinated to nitrogen-containing neutral ligand tri(4-(1H-imidazole-1-l) phenyl) amine for efficient adsorption ReO₄^-/TcO₄^-. Owning to the twofold interpenetrating structure, both of them exhibit strong alkaline resistance. Consequently, NCU-3-Br exhibited superior adsorption performances with a maximum capacity as high as 483 mg/g, which is 2.23 times larger than that of NCU-3-Cl. The primary reasons accounting for the enhanced adsorption performances of NCU-3-Br are that compared to chlorine atoms, the smaller electronegativity of bromine atoms as halogen bonds donor can facilitate the formation of σ-holes, enhance positively charged skeleton, and reduce the adsorption energy associated with ReO₄^-/TcO₄^-. In addition, the one-dimensional hydrophobic channels in the NCU-3-Br framework enable NCU-3-Br to have highly selective toward ReO₄^-, which has a low relative charge density against interfering ions. The SRS simulation removal experiment further confirmed the excellent adsorption capacity of NCU-3-Br to ReO₄^-/TcO₄^-. This work illustrated that the halogenated new strategy incorporated different halogen atoms into MOF skeletons can dramatically modulate the adsorption performances for ReO₄^-/TcO₄^-.

Ultraselective Extraction Reprocessing of 99TcO4-/ReO4- with a Promising Carbamic Acid Extractant System

With the development of nuclear energy, the reprocessing of ⁹⁹TcO₄^-/ReO₄^- has become a very difficult problem due to environmental issues such as high output, long life, and easy leakage. In this study, three extraction systems containing carbamic acid were introduced into the reprocessing of ⁹⁹TcO₄^-/ReO₄^- for the first time. The results involving one of the three results show that N-[N,N-di(2-ethylhexyl) aminocarbonylmethyl] glycine (D2EHAG) has ultrahigh selectivity for removal to ⁹⁹TcO₄^-/ReO₄^-. When the extreme concentration ratio of SO₄^2- and Cl^- to ReO₄^- of D2EHAG is 10,000:1, the distribution coefficient of ReO₄^- still reaches 12.73 and 2.67, respectively. Additionally, the most hydrophilic NO₃^-, when the extreme concentration ratio of NO₃^- and ReO₄^- is 1000:1, still has a distribution coefficient close to 2.33, which is more than the most reported MOF adsorption materials. Moreover, the reaction kinetics, stripping rate, and reuse rate were studied. After five cycles, the removal rate is still 98.12%, with a decrease of less than 0.7%. The system containing carbamic acid is a potential extraction removal system to remove ⁹⁹TcO₄^-/ReO₄^- from nuclear radioactive wastewater.

Two-Fold Interlocking Cationic Metal-Organic Framework Material with Exchangeable Chloride for Perrhenate/Pertechnetate Sorption

Albeit reported substantial sorbents for elimination of TcO₄^-, the issue of secondary contamination caused by released counterions (such as NO₃^-) from the cationic metal-organic framework (MOF) has not come into the sufficient limelight for researchers. Herein, our efforts are dedicated to settle the matter through synthesis of NiCl₂ based on the cationic MOF (ZJU-X4). Less harmful chlorides are used as exchangeable anions for replacing hazardous anions. Notably, ZJU-X4 exhibited fast sorption kinetics, high sorption capacity of 395 mg/g, decent selectivity, and excellent reusability in four recycles. The results of ion chromatography revealed that the released chloride ion was equal to sorption of target ions, and pair distribution functions were employed to analyze the changes in ZJU-X4 after sorption of ReO₄^-, clearly elucidating the anion-exchange mechanism. Furthermore, in the dynamic sorption experiments, ReO₄^- could be facilely and effectively removed and recovered, showing the value of practical applications. This work indicated that cationic MOF-based metal chloride salts would be a better choice for anionic sorbents.

Unveiling the Impact of Diverse Morphology of Ionic Porous Organic Polymers with Mechanistic Insight on the Ultrafast and Selective Removal of Toxic Pollutants from Water

In recent years, detoxification of contaminated water by different types of materials has received a great deal of attention. However, lack of methodical in-depth understanding of the role of various physical properties of such materials toward improved sorption performance limits their applicable efficiencies. In perspective, decontamination of oxoanion-polluted water by porous materials with different morphologies are unexplored due to a shortfall of proper synthetic strategies. Herein, systematic optimization of sequestration performance toward efficient decontamination of toxic oxoanion-polluted water has been demonstrated by varying the morphologies of an imidazolium-based cationic polymeric network [ionic porous organic polymers (iPOP-5)]. Detailed morphological evolution showed that the chemically stable ionic polymer exhibited several morphologies such as spherical, nanotube, and flakes. Among them, the flakelike material [iPOP-5(F)] showed ultrafast capture efficiency (up to ∼99 and >85% removal within less than 1 min) with high saturation capacities (301 and 610 mg g^-1) toward chromate [Cr(VI)] and perrhenate [Re(VII)] oxoanions, respectively, in water. On the other hand, the spherical-shaped polymer [iPOP-5(S)] exhibited relatively slow removal kinetics (>5 min for complete removal) toward both Cr(VI) and Re(VII) oxoanions. Notably, iPOP-5(F) eliminated Cr(VI) and Re(VII) selectively even in the presence of excessive (∼100-fold) competing anions from both high- and low-concentration contaminated water. Further, the compound demonstrated efficient separation of those oxoanions in a wide pH range as well as in various water systems (such as potable, lake, river, sea, and tannery water) with superior regeneration ability. Moreover, as a proof of concept, a column exchange-based water treatment experiment by iPOP-5(F) has been performed to reduce the concentration of Cr(VI) and Re(VII) below the WHO permitted level. Mechanistic investigation suggested that the rare in situ exfoliation of flakes into thin nanosheets helps to achieve ultrafast capture efficiency. In addition, detailed theoretical binding energy calculations were executed in order to understand such rapid, selective binding of chromate and perrhenate oxoanions with iPOP-5(F) over other nonmetal-based anions.

Low-Temperature and Additive-Free Synthesis of Spherical MIL-101(Cr) with Enhanced Dye Adsorption Performance

The chromium-benzenedicarboxylate metal–organic framework (MOF), MIL-101(Cr), is one of the most well-investigated and widely used prototypical MOFs. Regarding its synthesis, the use of a toxic modulator (usually HF) and high reaction temperature (220 °C) are the main factors hindering its further expansion of production and utilization. In fact, high quality MIL-101(Cr) crystals can be prepared at a much lower temperature (160 °C) with spherical morphology via an additive-free approach. Compared to traditional octahedral MIL-101(Cr), the spherical MIL-101(Cr) possesses higher adsorption performance toward dye molecules, including methyl orange (MO) and rhodamine B (RB). The results suggest that toxic additives and high reaction temperatures are not essential in the synthesis of MIL-101(Cr), and the fabrication of spherical MIL-101(Cr) may offer a facile and effective pathway for the large-scale industrial application of MIL-101(Cr).

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Peptide-Mediated Synthesis of Zeolitic Imidazolate Framework-8: Effect of Molecular Hydrophobicity, Charge Number and Charge Location

Three amphiphilic peptides with varied molecular hydrophobicity, charge number and charge location have been designed as regulators to modulate the crystal growth of zeolitic imidazolate framework-8 (ZIF-8). All three peptides can interact with ZIF-8 to inhibit {100} facet growth and produce truncated cubic crystals. The peptide's molecular hydrophobicity plays a dominant role in defining the final morphology and size of the ZIF-8 crystals. The peptides with less charge and higher hydrophobicity can promote nuclei formation and crystal growth to give smaller ZIF-8 crystals. However, the charge located in the center of the molecular hydrophobic region has little effect on the crystal nucleation and growth due to the shielding of its charge by molecular aggregation. The study provides insights into the effect of molecular charge and hydrophobicity on ZIF-8 crystal growth and is helpful for guiding the molecular design for regulating the synthesis of metal-organic framework materials.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Task-Specific Tailored Cationic Polymeric Network with High Base-Resistance for Unprecedented 99TcO4 - Cleanup from Alkaline Nuclear Waste

Direct removal of 99TcO4 - from alkaline nuclear waste is desirable because of the nuclear waste management and environmental protection relevant to nuclear energy but is yet to be achieved given that combined features of decent base-resistance and high uptake selectivity toward anions with low charge density have not been integrated into a single anion-exchange material. Herein, we proposed a strategy overcoming these challenges by rationally modifying the imidazolium unit of a cationic polymeric network (SCU-CPN-4) with bulky alkyl groups avoiding its ring-opening reaction induced by OH- because of the steric hindrance effect. This significantly improves not only the base-resistance but also the affinity toward TcO4 - as a result of enhanced hydrophobicity, compared to other existing anion-exchange materials. More importantly, SCU-CPN-4 exhibits record high uptake selectivity, fast sorption kinetics, sufficient robustness, and promising reusability for removing 99TcO4 - from the simulated high-level waste stream at the U.S. Savannah River Site, a typical alkaline nuclear waste, in both batch experiment and dynamic column separation test for the first time.

An anionic potassium-organic framework for selective removal of uranyl ions

Effective and selective removal of radioactive metal ions from aqueous solutions is of great importance due to their harmful effects on humans and other living species. However, it is a big challenge for researchers to develop effective adsorbents with high selectivity and a wide pH application range even if some progress has been achieved. Herein, we report an anionic potassium organic framework (UPC-K1) with protonated dimethylamine (Me2NH2+) residing inside the rhomboid channels. The unique 3D firm structure of UPC-K1 is constructed by the cross-linking of the 2D arrangement using weak K-O bonds (2.9270 Å) and strong hydrogen bonds (1.6498 Å), which endows it with excellent chemical stability in organic solvents, boiling water, and aqueous solution in the pH range 3-10. Based on the cation exchange, depending on pore size selectivity, UPC-K1 shows excellent adsorption performance towards UO22+ in aqueous solutions at 298 K with the following characteristics: (1) effective removal in the pH range 3-10; (2) high selectivity over other metal cations; (3) a high adsorption capacity of 551.4 mg g-1; (4) a rapid adsorption equilibrium within 3 hours under stirring; and (5) effective adsorption at low concentrations, with a residual concentration of 0.69 ppm even at an initial concentration of 10.3 ppm after stirring for 24 hours. These results indicate the great potential of UPC-K1 in the treatment of uranium-containing nuclear wastewater.