Precision Long-Chain Branched Polyethylene via Acyclic Diene Metathesis Polymerization

Achieving high molecular weight alternating copolymers of 1-octene with methyl acrylate via Lewis acid catalyzed copolymerization

The radical (co)polymerization of long-chain α-olefins (C4+) to produce high molecular weight (Mw) polymers is of great importance. However, this process is currently faced with significant challenges due to the presence of less reactive allylic radicals during radical (co)polymerization, leading to oligomers or polymers with extremely low Mw (less than 1 × 104 g mol-1). Using copolymerization of 1-octene with methyl acrylate (MA) as a proof-of-concept for addressing this challenge, we present a feasible method for synthesizing high Mw α-olefin copolymers via scandium trifluoromethanesulfonate (Sc(OTf)3)-mediated radical copolymerization. In this case, copolymers of 1-octene and MA (poly(1-octene-alt-MA)) with a Mw exceeding 3 × 104 g mol-1 were successfully synthesized in the presence of Sc(OTf)3. Meanwhile, the presence of alternating 1-octene-MA sequential structures was observed. To further enhance the Mw of poly(1-octene-alt-MA), a difunctional comonomer, 1,7-octadiene, was introduced to copolymerize with 1-octene and MA. The results indicate that the incorporation of difunctional comonomer leads to a significant increase in the Mw of the copolymers synthesized. The addition of 1 mol% of 1,7-octadiene resulted in a copolymer with a remarkably high Mw of up to 13.45 × 104 g mol-1 while still maintaining a high degree of the alternating 1-octene-MA sequence (41%). The influence of polymerization parameters on the molecular weight were also investigated. Increasing the monomer concentration, reducing the dosage of initiator, and lowering the polymerization temperature have been found to be advantageous in enhancing the molecular weight. This approach has also been successfully applied to the synthesis of high molecular weight alternating copolymers of other long-chain α-olefins, including 1-hexene, 1-decene and 1-tetradecane, with methyl acrylate. In summary, this study provides a feasible method for converting "less activated" α-olefins into high Mw olefin copolymers. This approach holds significant potential for the production of value-added polyolefins, thus offering promising prospects for future applications.

Analysis of Ethylene Copolymers with Long-Chain α-Olefins (1-Dodecene, 1-Tetradecene, 1-Hexadecene): A Transition between Main Chain Crystallization and Side Chain Crystallization

A series of ethylene copolymers with long-chain α-olefins [LCAOs, 1-dodecene (DD), 1-tetradecene (TD), 1-hexadecene (HD)] and various LCAO contents were prepared, and their thermal properties, including effects of LCAO content and side chain length, were explored. The Cp*TiCl2(O-2,6- i Pr2-4-SiEt3-C6H2)-MAO catalyst system afforded rather high-molecular-weight copolymers with unimodal molecular weight distributions and uniform compositions (confirmed by DSC thermograms). In addition to the melting temperatures (T m values) corresponding to the so-called main chain crystallization (samples with low LCAO contents, the T m value decreased upon increasing the LCAO content) and the side chain crystallization [polymer samples with high LCAO contents, by intermolecular interaction of side chains as observed in poly(DD), poly(TD), and poly(HD)], the other T m value was observed, especially in poly(ethylene-co-HD)s (assumed to be due to co-crystallization of the branch and the main chain through an interaction of the main chain and the long side chains). The presence of another crystalline phase in poly(ethylene-co-HD)s was also suggested by a wide-angle X-ray diffraction (WAXD) analysis. These T m values in poly(ethylene-co-TD)s and poly(ethylene-co-DD)s with rather high TD or DD contents were affected by the heating conditions in the measurement of DSC thermograms (5 or 10 °C/min), suggesting that the driving force for formation of the crystal packing (observed as T m) is weak and affected by the alkyl side chain lengths.

Synthesis of Semicrystalline Long Chain Aliphatic Polyesters by ADMET Copolymerization of Dianhydro-D-glucityl bis(undec-10-enoate) with 1,9-Decadiene and Tandem Hydrogenation

Acyclic diene metathesis (ADMET) copolymerization of dianhydro-D-glucityl bis(undec-10-enoate) (M1) with 1,9-decadiene (DCD) using ruthenium-carbene catalyst, RuCl2(IMesH2)(CH-2-OiPr-C6H4) [IMesH2 = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene, HG2], afforded unsaturated polyesters (Mn = 9300–23,400) under the optimized conditions. Subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C) with the addition of a small amount of Al2O3 resulted in the saturated polymers having a melting temperature of 71.7–107.6 °C, depending on the molar ratio of M1 and DCD.

Probing Polyester Branching by Hybrid Trapped Ion-Mobility Spectrometry-Tandem Mass Spectrometry

Trapped ion-mobility spectrometry combined with quadrupole time-of-flight mass spectrometry (TIMS-QTOFMS) was evaluated as a tool for resolving linear and branched isomeric polyester oligomers. Solutions of polyester samples were infused directly into the ion source employing electrospray ionization (ESI). TIMS-MS provides both mobility and m/z data on the formed ions, allowing construction of extracted-ion mobilograms (EIMs). EIMs of polyester molecules showed multimodal patterns, indicating conformational differences among isomers. Subsequent TIMS-MS/MS experiments indicated mobility differences to be caused by (degree of) branching. These assignments were supported by liquid chromatography-TIMS-MS/MS analysis, confirming that direct TIMS-MS provided fast (500 ms/scan) distinction between linear and branched small oligomers. Observing larger oligomers (up to 3000 Da) using TIMS required additional molecular charging to ensure ion entrapment within the mobility window. Molecular supercharging was achieved using m-nitrobenzyl alcohol (NBA). The additional charges on the oligomer structures enhanced mobility separation of isomeric species but also added to the complexity of the obtained fragmentation mass spectra. This complexity could be partly reduced by post-TIMS analyte-decharging applying collision-induced dissociation (CID) prior to Q1 with subsequent isolation of the singly charged ions for further fragmentation. The as-obtained EIM profiles were still quite complex as larger molecules possess more possible structural isomers. Nevertheless, distinguishing between linear and symmetrically branched oligomers was possible based on measured differences in collisional cross sections (CCSs). The established TIMS-QTOFMS approach reliably allows branching information on isomeric polyester molecules up to 3000 Da to be obtained in less than 1 min analysis time.

Synthesis of Biobased Long-Chain Polyesters by Acyclic Diene Metathesis Polymerization and Tandem Hydrogenation and Depolymerization with Ethylene

Acyclic diene metathesis (ADMET) polymerization of biobased α,ω-dienes of bis(undec-10-enoate) with diols (1,4-butanediol, isosorbide, isomannide, and 1,4-cyclohexanedimethanol) afforded high-molecular weight unsaturated polyesters, and subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C, 3 h) gave the saturated polymers upon addition of a small amount of Al2O3 (1.0-1.7 wt %). Subsequent reaction of the unsaturated polymers with ethylene afforded the oligomers (by depolymerization and degradation).

Precise polyethylene derivatives bearing mesogenic side-chains: delicate self-assembly depending on graft density

Precise polyethylene derivatives bearing mesogenic side-chains demonstrate a sophisticated side-chain spacing effect on the local coupling and spatial arrangement of the backbone and side-chains.

Functional Precision Polymers via Stereo- and Regioselective Polymerization Using Group 6 Metal Alkylidene and Group 6 and 8 Metal Alkylidene N-Heterocyclic Carbene Complexes

The concepts of functional precision polymers and the latest accomplishments in their synthesis are summarized. Synthetic concepts based on chain growth polymerization are compared to iterative synthetic approaches. Here, the term "functional precision polymers" refers to polymers that are not solely hydrocarbon-based but contain functional groups and are characterized by a highly ordered primary structure. If insertion polymerization is used for their synthesis, olefin metathesis-based polymerization techniques, that is, ring-opening metathesis polymerization (ROMP), acyclic diene metathesis (ADMET) polymerization, and the regio- and stereoselective cyclopolymerization of α,ω-diynes are almost exclusively applied. Particularly with regio- and stereospecific ROMP and with cyclopolymerization, the synthesis of tactic polymers and copolymers with high regio-, stereo-, and sequence control can be accomplished; however, it requires carefully tailored transition metal catalysts. The fundamental synthetic concepts and strategies are outlined.