Release Behavior of Polymeric Vesicles in Solution Controlled by External Electrostatic Field

Pathway-dependent Shape Transformation of Polymeric Vesicles under UV Light and the Assembly of UV-irradiated Polymer

Shape transformation of polymer particles is generally a nonequilibrium dynamics process. Controlling the shape transformation of polymers is increasingly attractive and challenging for scientists due to their extensive use in drug delivery and cancer therapy. Herein, we investigated the UV-triggered shape transformation pathway of polymeric vesicles assembled from Polystyrene-block-poly(4-vinylpyridine) and 4-hydroxyazobenzene (PS-b-P4VP(Azo-OH)) and the direct assembly pathway of UV-irradiated PS-b-P4VP(Azo-OH) homogeneous solution. In the shape transformation process, well-assembled vesicles can be transformed into toroid, cylindrical, rod-like, and spherical micelles. In the direct assembly pathway, rod-like and spherical micelles can be obtained. Interestingly, the toroid micelles can be obtained only from the UV-triggered shape transformation pathway. Contrasting the two pathways reveals the pathway dependence of PS-b-P4VP(Azo-OH) assembly, suggesting that the final assembly morphology is determined by the initial state and dynamic process. The speed of UV-triggered shape transformation and the final morphology of assemblies can be tuned easily by adjusting the UV illuminance, time, and content of Azo-OH addition. Moreover, the light-responsive polymeric vesicles can be used as drug carriers and have the potential to release drugs precisely.

Solution Self-Assembly of Amphiphilic Tadpole-like Giant Molecules Constructed by Monotethering Diblock Copolymer Chain onto a Nanoparticle

The self-assembly behavior of a tadpole-like giant molecule (TGM) constructed from a hydrophobic nanoparticle (NP) monotethered by a single amphiphilic AB diblock copolymer chain was investigated by combining self-consistent field theory and density functional theory in solution. The effects of the hydrophobicities of the B blocks and NPs (i.e., solvent properties) on the self-assembly behavior of the TGMs were investigated in the cases of weak and strong intramolecular interactions (i.e., incompatibilities) between the components of giant molecules, respectively. Besides conventional ordered aggregates (such as spheres, rings, and vesicles) with hydrophobic B-cores covered by NP shells, several aggregates with novel hierarchical structures, including vesicles with NP-inserted hydrophobic walls, bead-string-like micelles, and long cylindrical micelles with NP bumps, were obtained by tuning the solvent properties under different intramolecular interactions. Noteworthy that the simulation results show that the arrangement of the NP bumps on the long cylindrical micelles may have a certain degree of helicity, which means that these micelles may have some unique electromagnetic features such as circular dichroism. Phase diagrams as a function of the hydrophobicities of the B blocks and NPs were constructed to show the formation conditions of these novel structures. These findings can not only offer new insights into understanding of the self-assembly behavior of the TGM in solution but also provide useful guidance for simple and efficient regulation of the morphology, as well as the NP distribution and arrangement of the ordered aggregates in experiments.

Microwave Irradiation-Assisted Reversible Addition-Fragmentation Chain Transfer Polymerization-Induced Self-Assembly of pH-Responsive Diblock Copolymer Nanoparticles

Herein, we present a versatile platform for the synthesis of pH-responsive poly([N-(2-hydroxypropyl)]methacrylamide)-b-poly[2-(diisopropylamino)ethyl methacrylate] diblock copolymer (PHPMA-b-PDPA) nanoparticles (NPs) obtained via microwave-assisted reversible addition-fragmentation chain transfer polymerization-induced self-assembly (MWI-PISA). The N-(2-hydroxypropyl) methacrylamide (HPMA) monomer was first polymerized to obtain a macrochain transfer agent with polymerization degrees (DPs) of 23 and 51. Subsequently, using mCTA and 2-(diisopropylamino)ethyl methacrylate (DPA) as monomers, we successfully conducted MWI-PISA emulsion polymerization in aqueous solution with a solid content of 10 wt %. The NPs were obtained with high monomer conversion and polymerization rates. The resulting diblock copolymer NPs were analyzed by dynamic light scattering (DLS) and cryogenic-transmission electron microscopy (cryo-TEM). cryo-TEM studies reveal the presence of only NPs with spherical morphology such as micelles and polymer vesicles known as polymersomes. Under the selected conditions, we were able to fine-tune the morphology from micelles to polymersomes, which may attract considerable attention in the drug-delivery field. The capability for drug encapsulation using the obtained in situ pH-responsive NPs, the polymersomes based on PHPMA₂₃-b-PDPA₁₀₀, and the micelles based on PHPMA₅₁-b-PDPA₁₀₀ was demonstrated using the hydrophobic agent and fluorescent dye as Nile red (NR). In addition, the NP disassembly in slightly acidic environments enables fast NR release.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

Light-Enabled Reversible Shape Transformation of Block Copolymer Particles

Confined self-assembly of block copolymers (BCPs) is effective to manipulate various shapes of particles. In emulsion confined self-assembly, reversibly light-trigged switchable BCP particles are extremely expected, yet rarely reported. Herein, a novel strategy is developed to realize reversibly light-responsive shape-transformation of BCP particles by constructing functional surfactants with light-active azobenzene (azo) groups in the confined self-assembly of BCPs within emulsion droplet. Ultraviolet and visible lights can reversibly modulate the amphiphilicity and interfacial affinity of the surfactants to different blocks, triggering the reversible microphase structure transformation of BCP particles with high temporal-spatial resolution. We can realize shape and morphological transitions of BCP particles from onion-shaped spherical particles to striped ellipsoids and, ultimately, to inverse onion-like particles by ultraviolet irradiation. More importantly, this shape transformation is reversible by the irradiation of visible light, attributed to the reversible trans-cis isomerization of azo groups. We also demonstrate that the light-triggered shape transformation of BCP particles can be employed in a controllable drug release through a noncontacted and programmed manner, showing promising potential in clinic and biomedicine.

The responsive behaviors of bilayer membrane under uniaxial mechanical probe

In experiments, atomic force microscopy technology was used to measure the modulus of the membrane. However, these studies mainly focus on the linear responsive behavior. In the present work, a theoretical study is performed to show the nonlinear responsive behavior, which includes the stretching induced structural transitions. It demonstrates that the structural transition of the bilayer membrane takes place during the stretching process of the mechanical probe. A vertical cylindrical micelle can be obtained by stretching the membrane under deep compression conditions, and the cylindrical micelle can grow continuously along the axial direction. Moreover, under shallow compression conditions, the probe pulls a spherical micelle from the membrane, and then, the membrane returns to flatness. A comprehensive study is performed to show the mechanism of the responsive behaviors of the structural transition during the compression and stretching processes. When the probe acts on the B-rich layer, it is more likely to pull out a regular micelle. However, when the probe acts on the bottom A-rich layer, complex vesicles are more likely to be pulled out from the bilayer membrane. This study provides a comprehensive diagram of the mechanical responsive behavior of the membrane, which would be a guide for an experiment of biomembranes and the design of new self-assembled structures.

In Situ Fabrication of Polymeric Microcapsules by Ink-Jet Printing of Emulsions

Phase separation driven by solvent evaporation of emulsions can be used to create polymeric microcapsules. The combination of emulsion solvent evaporation with ink-jet printing allows the rapid fabrication of polymeric microcapsules at a target location on a surface. The ink is an oil-in-water emulsion containing in the dispersed phase a shell-forming polymer, a core-forming fluid that is a poor solvent for the polymer, and a low-boiling good solvent. After the emulsion is printed onto the substrate, the good solvent evaporates by diffusion through the aqueous phase, and the polymer and the poor solvent phase separate to form microcapsules. The continuous aqueous phase contains polyvinyl alcohol that serves as an emulsifier and a binder of the capsules to the substrate. This method is demonstrated for microcapsules with various shell-forming polymers (polystyrene, poly(methylmethacrylate) and poly(l-lactide)) and core-forming poor solvents (hexadecane and a 4-heptanone/sunflower oil mixture). Cargoes such as fluorescent dyes (Nile Red and tetracyanoquinodimethane) or active ingredients (e.g., the fungicide tebuconazole) can be encapsulated. Uniform microcapsules are obtained by printing emulsions containing monodisperse oil droplets produced in a microfluidic device. We discuss the physical parameters that need to be controlled for the successful fabrication of microcapsules in inkjet printing. The method for rapid, in situ encapsulation could be useful for controlled-release applications such as in agrochemical sprays, fragrances, functional coatings, and topical medicines.

Redox and pH responsive polymeric vesicles constructed from a water-soluble pillar[5]arene and a paraquat-containing block copolymer for rate-tunable controlled release

Herein, for rate-tunable controlled release, pH and redox dual responsive polymeric vesicles were constructed based on host-guest interaction between a water soluble pillar[5]arene (WP5) and a paraquat-containing block copolymer (BCP) in water. The yielding polymeric vesicles can be further applied in the controlled release of a hydrophilic model drug, doxorubicin hydrochloride (DOX). The drug release rate is regulated depending on the type of single stimulus or the combination of two stimuli. Meanwhile, DOX-loaded polymeric vesicles present anticancer activity in vitro comparable to free DOX under the studied conditions, which may be important for applications in the therapy of cancers as a controlled-release drug carrier.

A facile method for preparation of uniform polymeric vesicles with tunable size

Vesicle size and size uniformity determine whether the vesicle can realize its full potential in a wide range of biological and biomedical applications. Herein, we reported a simple yet general cosolvent method to directly prepare uniform polymeric vesicles with a tunable size ranging from 100 nm to 150 nm formed from the amphiphilic diblock copolymer poly(4-vinylpyridine)-block-polystyrene (P4VP77-b-PS318). The uniform polymeric vesicles can be easily obtained by adding plenty of selective solvent only once into the polymer solution and then resting overnight. It is found that uniform vesicles are formed with a fixed size. There is no further fusion between vesicles. The PDI of the vesicles measured by DLS can be as low as 0.03. Moreover, the size of these uniform vesicles can be controlled by the content of the selective solvent. The higher the content of the selective solvent, the smaller the vesicles that form. Monte Carlo simulation was also performed in this study. The simulation results indicated that the vesicle size indeed decreases with an increase in the content of the selective solvent. Two reasons leading to the decrease in vesicle size are elucidated. In addition, the simulations reveal that the size uniformity of the vesicle is essentially determined by the interactive enthalpy of the system.

Synthesis and self-assembly of a novel amphiphilic diblock copolymer consisting of isotactic polystyrene and 1,4-trans-polybutadiene-graft-poly(ethylene oxide)

Herein, a novel amphiphilic diblock copolymer consisting of isotactic polystyrene (iPS) and 1,4-trans-polybutadiene-graft-poly(ethylene oxide) (1,4-trans-PBD-g-PEO), iPS-b-(1,4-trans-PBD-g-PEO), was synthesized by the combination of living coordination copolymerization and graft copolymerization. iPS-b-1,4-trans-PBD was firstly synthesized via sequential monomer addition in the presence of 1,4-dithiabutandiyl-2,2′-bis(6-cumenyl-4-methylphenoxy) titanium dichloride (complex 1) activated by triisobutyl aluminum modified methylaluminoxane (MMAO). Moreover, hydroboration of double bonds in the 1,4-trans-PBD blocks were performed with 9-borabicyclo[3.3.1]nonane (9-BBN) and subsequent oxidation by NaOH/H₂O₂ to form hydroxyls. Consequently, PEO was grafted into the hydroxylated 1,4-trans-PBD block in terms of ring-opening polymerization of ethylene oxide with potassium/naphthalide as initiatior. We also described solvent-evaporation-induced self-assembly of iPS-b-1,4-trans-PBD in n-dodecane and iPS-b-1,4-trans-PBD-g-PEO in aqueous solution, which were selective solvent for 1,4-trans-PBD and for 1,4-trans-PBD-g-PEO blocks, respectively. In these cases, tetrahydrofuran (THF) was used as good and volatile solvent. These resultant iPS-containing diblock copolymers could self-assemble into spherical nano-micelles with an iPS core as amorphous agglomeration or a very low degree of crystallinity resulting from slow crystallization rate and nanoconfinement. In addition, after isothermal crystallization of iPS in the micellar cores self-assembled in n-dodecane at 120 °C for 3 hours, the micellar morphology changed from sphere-like to platelet-like. It was believed that isothermal crystallization of iPS induced the deformation of the micelles.

Herein, a novel amphiphilic diblock copolymer consisting of isotactic polystyrene and 1,4-trans-polybutadiene-graft-poly(ethylene oxide) was synthesized and its self-assembly behavior was investigated.

Recent progress in the self-assembly of block copolymers confined in emulsion droplets

When the self-assembly of block copolymers (BCPs) occurs within a deformable emulsion droplet, BCPs can aggregate into a variety of nanoscaled particles with unique nanostructures and properties since the confinement effect can effectively break the symmetry of a structure.

Self-assembly of block copolymers into sieve-like particles with arrayed switchable channels and as scaffolds to guide the arrangement of gold nanoparticles

Well-defined polymeric particles with not only a controllable shape and internal nanostructures but also stimuli-responsive functions have attracted intensive attention because of their great potential in various fields. Herein, we created unique sieve-like particles with lattice arrayed switchable channels via the confined self-assembly of poly(4-vinylpyridine)-b-polystyrene-b-poly(4-vinylpyridine) (P4VP-b-PS-b-P4VP) triblock copolymers within the emulsion droplets and the subsequent swelling treatment in ethanol. It is worth noting that the hexagonally packed P4VP channels in the sieve-like particles are switched on and off by changing the solvent type, i.e., P4VP channels are switched on in ethanol and switched off in water, which can operate as a solvent-controlled chemical gate. Moreover, the well-defined sieve-like particles can be further used as scaffolds to guide the spatial arrangement of gold nanoparticles, which generates hybrid nanomaterials with controllable morphology and ordered spatial arrangement of AuNPs.