Rigid-to-Flexible Conformational Transformation: An Efficient Route to Ring-Opening of a Tröger's Base-Containing Ladder Polymer

High Free Volume Polyelectrolytes for Anion Exchange Membrane Water Electrolyzers with a Current Density of 13.39 A cm-2 and a Durability of 1000 h

The rational design of the current anion exchange polyelectrolytes (AEPs) is challenging to meet the requirements of both high performance and durability in anion exchange membrane water electrolyzers (AEMWEs). Herein, highly-rigid-twisted spirobisindane monomer is incorporated in poly(aryl-co-aryl piperidinium) backbone to construct continuous ionic channels and to maintain dimensional stability as promising materials for AEPs. The morphologies, physical, and electrochemical properties of the AEPs are investigated based on experimental data and molecular dynamics simulations. The present AEPs possess high free volumes, excellent dimensional stability, hydroxide conductivity (208.1 mS cm-1 at 80 °C), and mechanical properties. The AEMWE of the present AEPs achieves a new current density record of 13.39 and 10.7 A cm-2 at 80 °C by applying IrO2 and nonprecious anode catalyst, respectively, along with outstanding in situ durability under 1 A cm-2 for 1000 h with a low voltage decay rate of 53 µV h-1 . Moreover, the AEPs can be applied in fuel cells and reach a power density of 2.02 W cm-2 at 80 °C under fully humidified conditions, and 1.65 W cm-2 at 100 °C, 30% relative humidity. This study provides insights into the design of high-performance AEPs for energy conversion devices.

Synthesis and Antibacterial Activity of Spiro[4H-pyran-3,3'-oxindoles] Catalyzed by Tröger's Base Derivative

OBJECTIVE

Two classes of spiro[4H-pyran-3,3'-oxindole] derivatives were prepared via the one pot reaction of chain diketones (1-phenyl-1,3-butanedione or dibenzoyl methane), substituted isatins and malononitrile successfully catalyzed by a Tröger's base derivative 1b (5,12-dimethyl-3,10-diphenyl-bis-1H-pyrazol[b,f][4,5]-1,5-diazadicyclo[3.3.1]-2,6-octadiene). The antibacterial activity of products against three wild-type bacteria (B. subtilis, S. aureus, and E. coli) and two resistant strains (Methicillin-resistant S. aureus (18H8) and E. coli carrying the BlaNDM-1 gene (18H5)) was evaluated using the minimum inhibitory concentration (MIC)..

METHODS

1-Phenyl-1,3-butanedione 2 or dibenzoylmethane 2' (0.42 mmol), substituted isatin 3 (0.4 mmol), malononitrile 4 (0.8 mmol), Tröger's base derivative 1b (0.08 mmol), and 10 mL of acetonitrile were added to a 50 mL round bottom flask and refluxed. After the completion (TLC monitoring), water (10 mL) was added to the reaction mixture; pH = 7 was adjusted with saturated NaHCO3 (aq.), and the mixture was extracted with CH2Cl2 (50 mL × 3). Organic layers were combined and dried with anhydrous Na2SO4; the solvent was removed under vacuum, and the residue was purified by column chromatography (VDCM: VMeOH = 80: 1) to afford product 5. The antibacterial activity was tested by the MTT method.

RESULTS

Seventeen spiro[4H-pyran-3,3'-oxindole] derivatives were synthesized through the reaction of chain diketones (1-phenyl-1,3-butanedione or dibenzoyl methane), substituted isatins, and malononitrile in one-pot in medium to high yields. Four compounds showed antibacterial activity, and two of them showed the same activity as the positive control Ceftazidime on S. aureus (MIC = 12.5 μg/mL).

CONCLUSION

Two classes of spiro[4H-pyran-3,3'-oxindole] derivatives were prepared, and their antibacterial activity was evaluated. Tröger's base derivative 1b (5,12-dimethyl-3,10-diphenyl-bis-1H-pyrazol[b,f][4,5]- 1,5-diazadicyclo[3,3,1]-2,6-octadiene) was used as an efficient organocatalyst for the reaction of low reactive chain diketones (1-phenyl-1,3-butanedione or dibenzoyl methane), substituted isatins, and malononitrile in one-pot successfully and effectively by providing multiple active sites and alkaline environment. By the theoretical calculation, we explained the possible reaction sequence and mechanism. Due to the superiority and high efficiency of the TB framework as an organocatalyst, the reaction showed many advantages, including mild reaction conditions, low catalyst loading, and a wide substrate range. It expanded the application of Tröger's base to the multicomponent reaction in organocatalysis. Some products were screened due to their high antibacterial activity in vitro, showing their potential in new antibacterial drug development.

A Six-Armed Phenhomazine Ligand with a Potential "Turn-Off" Copper(II) Sensing Capability through Terbium(III) Luminescence Quenching

Herein, the design, synthesis, and characterization of a phenhomazine ligand are described. The ligand has six pendant acetate arms designed for the combined coordination of copper(II) and lanthanide(III) ions, with the perspective of developing a "turn-off" copper sensor. The key step for the ligand preparation was the one-step endomethylene bridge fission of a diamino Tröger's base with a concomitant alkylation. Fluorescence and absorption spectroscopies as well as nuclear magnetic resonance (NMR) experiments were performed to analyze and understand the coordination properties of the ligand. Transition metal coordination was driven by the synergistic effect of the free nitrogen atoms of the diazocinic core and the two central acetate arms attached to those nitrogen atoms, whereas lanthanide coordination is performed by the external acetate arms, presumably forming a self-assembled 2:2 metallosupramolecular structure. The terbium complex shows the typical green emission with narrow bands and long luminescence lifetimes. The luminescence quenching produced by the presence of copper(II) ions was analyzed. This work sets, therefore, a starting point for the development of a phenhomazine-based "turn-off" copper(II) sensor.

Hydrophilic Microporous Polymer Membranes: Synthesis and Applications

Ion and water transfer in subnanometer-sized confined channels of hydrophilic microporous polymer membranes show enormous potential in tackling the ubiquitous trade-off between permeability and selectivity for energy and environment-related membrane technologies. To this end, a variety of hydrophilic polymers of intrinsic microporosity (HPIMs) have been developed. Herein, the synthetic strategies toward HPIMs are summarized, including post-synthetic modification of polymers to introduce polar groups (e. g., amines, hydroxy groups, carboxylic acids, tetrazoles) or charged moieties (e. g., quaternary ammonium salts, sulfonic acids), and the polymerization of hydrophilic monomers. The advantages of HPIM membranes over others when employed in energy conversion and storage, acid gas capture and separation, ionic diodes, and ultrafiltration, are highlighted.

Switching of the conformational flexibility of a diazacyclooctane-containing ladder polymer by coordination and elimination of a Lewis acid

We report the first system of ladder polymers capable of interconversion between rigid and flexible conformations by coordination and elimination of a Lewis acid (BPh₂Cl) on diazacyclooctane units in the main chain.

Selective synthesis of diazacyclooctane -containing flexible ladder polymers with symmetrically or unsymmetrically substituted side chains

We report a versatile synthetic method for selectively obtaining symmetrical or unsymmetrical N,N′-dialkylated DACO-containing flexible ladder polymers with various functionalities.

Facile Access to Optically Active 2,6-Dialkyl-1,5-Diazacyclooctanes

The chiral substituted 1,5-diazacyclooctane (1,5-DACO) is of considerable importance and has attracted attention from a wide range of fields due to their unique chemical and biological properties. Despite the application potential, further study has not been optimized due to difficulties in their synthetic accessibility. Here, we report that the 1,5-DACO bearing a chiral auxiliary obtained from the formal [4+4] cycloaddition of N-alkyl-α,β-unsaturated imines can be further derivatized by nucleophilic alkylation to give various chiral substituted 1,5-DACO derivatives. The removal of the chiral auxiliary was effectively carried out using hydrogenation over Pearlman's catalyst. This methodology allows the production of a broad range of unprecedented optically active 2,6-dialkyl-1,5-DACO, which could not be accessed by other methods.