Responsive Nanogel Probe for Ratiometric Fluorescent Sensing of pH and Strain in Hydrogels

Ferrocene/ β-cyclodextrin based supramolecular nanogels as theranostic systems

A supramolecular redox responsive nanogel (NG) with the ability to sense cancer cells and loaded with a releasing therapeutic agent was synthesized using hostguest interactions between polyethylene glycol-grafted-β-cyclodextrin and ferrocene boronic acid. Cyclic voltammetry matched with other spectroscopy and microscopy methods provided strong indications regarding host-guest interactions and formation of the NG. Moreover, the biological properties of the NG were evaluated using fluorescence silencing, confocal laser scanning microscopy, and cell toxicity assays. Nanogel with spherical core-shell architecture and 100-200 nm sized nanoparticles showed high encapsulation efficiency for doxorubicin (DOX) and luminol (LU) as therapeutic and sensing agents. High therapeutic and sensing efficiencies were manifested by complete release of DOX and dramatic quenching of LU fluorescence triggered by 0.05 mM H2O2 (as an ROS component). The NGs showed high ROS sensitivity. Taking advantage of a high loading capacity, redox sensitivity, and biocompatibility, the NGs can be used as strong theranostic systems in inflammation-associated diseases.

Strong and Tough Nanostructured Hydrogels and Organogels Prepared by Polymerization-Induced Self-Assembly

In nature, the hierarchical structure of biological tissues endows them with outstanding mechanics and elaborated functions. However, it remains a great challenge to construct biomimetic hydrogels with well-defined nanostructures and good mechanical properties. Herein, polymerization-induced self-assembly (PISA) is for the first time exploited as a general strategy for nanostructured hydrogels and organogels with tailored nanodomains and outstanding mechanical properties. As a proof-of-concept, PISA of BAB triblock copolymer is used to fabricate hydrogels with precisely regulated spherical nanodomains. These nanostructured hydrogels are strong, tough, stretchable, and recoverable, with mechanical properties correlating to their nanostructure. The outstanding mechanical properties are ascribed to the unique network architecture, where the entanglements of the hydrophilic chains act as slip links that transmit the tension to the micellar crosslinkers, while the micellar crosslinkers dissipate the energy via reversible deformation and irreversible detachment of the constituting polymers. The general feasibility of the PISA strategy toward nanostructured gels is confirmed by the successful fabrication of nanostructured hydrogels, alcogels, poly(ethylene glycol) gels, and ionogels with various PISA formulations. This work has provided a general platform for the design and fabrication of biomimetic hydrogels and organogels with tailorable nanostructures and mechanics and will inspire the design of functional nanostructured gels.

Preparation and self-assembly of ionic (PNIPAM-co-VIM) microgels and their adsorption property for phosphate ions

Using N-isopropyl acrylamide (NIPAM) as the main monomer, 1-vinyl imidazole (VIM) containing tertiary amine groups as the functional comonomer, and 1,5-dibromo pentane as the crosslinking agent, ionic P(NIPAM-co-VIM) microgels were prepared by a two-step method. The crosslinking agent was reacted with tertiary amino groups by the quaternary amination. The results of zeta potential and particle size analysis showed that P(NIPAM-co-VIM) microgels were positively charged and had a particle size of about 400 nm, and the microgels with 11 wt% VIM still showed temperature sensitivity with a volume phase transition temperature of approximately 37.5 °C. The effects of VIM content, ambient temperature, and pH on the adsorption properties of the microgels for phosphate anions were explored. The self-assembly of the positively charged P(NIPAM-co-VIM) microgels with polyelectrolytes and the adsorption behavior of the layers for phosphate anions were studied using a quartz crystal microbalance (QCM). It was found that at a phosphate concentration of 0.3 mg mL^-1, VIM mass fraction of 11%, pH of 5, and temperature of 20 °C, the largest adsorption capacity of P(NIPAM-co-VIM) microgel on phosphate ions could reach 346.3 mg g^-1. The frequency responses of the microgel-modified QCM sensor could reach 3.0, 18.8, and 25.9 Hz when exposed to 10^-8, 10^-7, and 10^-6 M phosphate solutions. Therefore, the ionic (PNIPAM-co-VIM) microgels could be promising for fabricating anion-binding materials for separation and sensing applications.

Comparing pH-responsive nanogel swelling in dispersion and inside a polyacrylamide gel using photoluminescence spectroscopy and small-angle neutron scattering

Nanosized probes that report their changes in dimensions within networks in response to environmental stimuli are potentially important for applications such as drug delivery, load-supporting hydrogels and soft robotics. Recently, we developed a fluorescent pH-responsive nanogel (NG) that used Förster-resonance energy transfer (FRET) to report changes in the probe separation and NG swelling within hydrogels using photoluminescence (PL) spectroscopy. However, FRET cannot measure nanoparticle dimensions and is subject to artefacts. Here, we report the use of small-angle neutron scattering (SANS) to study both the NGs in dispersion and in polyacrylamide (PAAm) gels as a function of pH. We compare the PL and SANS data for both systems and as a function of pH. The SANS data for the dispersed NGs indicate that they have a core-shell structure with a swollen mesh size of ∼1.0 nm. We hypothesized that the NGs inside the PAAm gel would show the same general changes in scattering as the pH is increased, as observed for the dispersed NGs, and this is confirmed by the data. In summary, the data confirm that PL is a suitable (accessible) method for reporting internal environmental changes within gels using NG probes.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Including fluorescent nanoparticle probes within injectable gels for remote strain measurements and discrimination between compression and tension

The ability to remotely and non-invasively monitor and measure the strain within injectable gels used to augment soft tissue is highly desirable. Such information could enable real-time monitoring of gel performance and bespoke gel design. We report progress towards this goal using two fluorescent particle probe systems included within two different injectable gels. The two injectable gels have been previously studied in the contexts of intervertebral disc repair and stretchable gels for cartilage repair. The two fluorophore particle probes are blue or near-infrared (NIR) emitting and are present at very low concentrations. The normalised photoluminescence (PL) intensity from the blue emitting probe is shown to equal the compressive deformation ratio of the gels. Furthermore, the normalised ratio of the PL intensities for the blue and NIR probes varies linearly with deformation ratio over a wide range (from 0.2 to 3.0) with a seamless transition from compression to tension. Hence, PL can discriminate between compression and tension. The new approach established here should apply to other gels and enable remote detection of whether a gel is being compressed or stretched as well as the extent. This study may provide an important step towards remotely and minimally invasively measuring the strain experienced by load-supporting gels in vivo.

Highly swelling pH-responsive microgels for dual mode near infra-red fluorescence reporting and imaging

Near infra-red (NIR) fluorescence is a desirable property for probe particles because such deeply penetrating light enables remote reporting of the local environment in complex surroundings and imaging. Here, two NIR non-radiative energy transfer (NRET) fluorophores (Cy5 and Cy5.5) are coupled to preformed pH-responsive poly(ethylacrylate-methacrylic acid-divinylbenzene) microgel particles (PEA-MAA-5/5.5 MGs) to obtain new NIR fluorescent probes that are cytocompatible and swell strongly. NIR ratiometric photoluminescence (PL) intensity analysis enables reporting of pH-triggered PEA-MAA-5/5.5 MG particle swelling ratios over a very wide range (from 1-90). The dispersions have greatly improved colloidal stability compared to a reference temperature-responsive NIR MG based on poly(N-isopropylacrylamide) (PNP-5/5.5). We also show that the wavelength of maximum PL intensity (λ _max) is a second PL parameter that enables remote reporting of swelling for both PEA-MAA-5/5.5 and PNP-5/5.5 MGs. After internalization the PEA-MAA-5/5.5 MGs are successfully imaged in stem cells using NIR light. They are also imaged after subcutaneous injection into model tissue using NIR light. The new NIR PEA-MAA-5/5.5 MGs have excellent potential for reporting their swelling states (and any changes) within physiological settings as well as very high ionic strength environments (e.g., waste water).

Stimuli-responsive polymer/nanomaterial hybrids for sensing applications

Chemical and biological/biochemical sensors are capable of generating readout signals that are proportional to the concentration of specific analytes of interest. Signal sensitivity and limit of detection/quantitation can be enhanced through the use of polymers, nanomaterials, and their hybrids. Of particular interest are stimuli-responsive polymers and nanomaterials due to their ability to change their physical and/or chemical characteristics in response to their environment, and/or in the presence of molecular/biomolecular species of interest. Their individual use for sensing applications have many benefits, although this review focuses on the utility of stimuli-responsive polymer and nanomaterial hybrids. We discuss three main topics: stimuli-responsive nanogels, stimuli-responsive network polymers doped with nanomaterials, and nanoparticles modified with stimuli-responsive polymers.

A coumarin-connected carboxylic indolinium sensor for cyanide detection in absolute aqueous medium and its application in biological cell imaging

Fluorescent sensor has been noticed in detecting system due to its sensitive, selective, operational simplicity and low cost. We designed a coumarin-connected carboxylic indolium sensor molecule that is water-soluble and cytomembrane-permeable. This infrared (IR) emitter is selectively sensitive towards cyanide detection in aqueous media according to CN^- nucleophilic attack on the indole C=N function. Upon the addition of CN^- anion, the color of sensor in water varied from blue to colorless by naked eyes and fluorescence quenching was observed by spectroscopic method. This was because the intramolecular charge transfer (ICT) effect occurred when the fluorescent sensor was added with CN^-. The minimum detection limit of the sensor's fluorescence response to CN^- is 4.44 × 10^-7 mol/L. Furthermore, the cytotoxicity test shows the sensor has lower cytotoxicity, and indicates that this sensor can be utilized for practical detection of trace cyanide in wastewater.

Multi-Color Photoluminescence Based on Mechanically and Thermally Induced Liquid-Crystalline Phase Transitions of a Hydrogen-Bonded Benzodithiophene Derivative

Controlling assembled structures of π-conjugated liquid-crystalline molecules is of great interest in the development of stimuli-responsive luminescent materials due to their molecular motility in the ordered states. Herein, we describe a mechanoresponsive hydrogen-bonded benzodithiophene liquid-crystalline molecule that exhibits a tricolor photoluminescence switching at ambient temperature. The compound shows a shear-induced phase transition from a rectangular columnar to a metastable optically anisotropic mesophase, which is accompanied by the luminescent color change from yellow to sky-blue. The metastable mesophase exhibits a time-responsive transformation to another metastable mesophase showing a blue-green emission through isothermal aging at room temperature. The luminescent color of aged sample reverts back to the initial yellow color by thermal annealing at 150 °C. These dynamic structural changes accompanied by the emission color changes are governed by distinct π-stacking modes and hydrogen-bonded patterns. The shear-induced luminescent color change from yellow to blue is found to occur above the shear strain of 390 % at which the shear stress is 2.4×10⁵  Pa as determined from dynamic viscoelastic measurements.

Model-based design and synthesis of ferrocene containing microgels

Modelling and synthesis go hand in hand to efficiently engineer copolymer microgels with various architectures: core–shell structures (with ferrocene mainly in the core or in the shell) and also microgels with homogeneous comonomer distribution.

Using green emitting pH-responsive nanogels to report environmental changes within hydrogels: a nanoprobe for versatile sensing

Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then "dope" that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment within four different gels as well as stem cells. As the swelling of the nanogel probe changes within the gels the non-radiative energy transfer efficiency is strongly altered. This efficiency change is sensitively reported using the PL ratiometric intensity from the donor and acceptor. We demonstrate that our new nanoprobes can reversibly report gel swelling changes due to five different environmental stimuli. The latter are divalent cations, gel degradation, pH changes, temperature changes and tensile strain. In the latter case, the nanoprobe rendered a nanocomposite gel mechanochromic. The results not only provide new structural insights for hierarchical natural and synthetic gels, but also demonstrate that our new green-fluorescing nanoprobes provide a viable alternative to custom fluorophore labelling for reporting the internal gel environment and its changes.

Degradable and Thermosensitive Microgels Synthesized via Simultaneous Quaternization and Siloxane Condensation

Degradable and thermosensitive microgels were successfully prepared via simultaneous quaternization and siloxane condensation during surfactant-free emulsion polymerization, with N-vinylcaprolactam as the main monomer and 1-vinylimidazole (VIM) as the comonomer, in the presence of (3-bromopropyl)trimethoxysilane (BPTMOS). The formation mechanism of cross-linking network was attributed to the hydrolysis and condensation of the methoxysilyl groups of BPTMOS and the quaternization of imidazole moiety of VIM by the bromine group of BPTMOS, leading to the microgels. The microgels were spherical in shape with a narrow size distribution, stable in an acidic buffer solution, but degradable in neutral and alkaline solutions. The presence of quaternized imidazolium in the same chain segment of Si-O-Si cross-linking points promoted the decomposition of Si-O-Si bonds and hence the degradation of the microgels. The obtained microgels could load and release the model drug, doxorubicin. The size, thermosensitivity, stability, degradation rate, and drug release behavior of the resultant microgels could be tuned by controlling the cross-linking degree, chemical composition, and degradation medium.

Shape and Color Switchable Block Copolymer Particles by Temperature and pH Dual Responses

Herein, we report a simple and robust strategy for preparing dual-responsive shape-switchable block copolymer (BCP) particles, which respond to subtle temperature and pH changes near physiological conditions (i.e., human body temperature and neutral pH). The shape transition of polystyrene- b-poly(4-vinylpyridine) BCP particles between lens and football shapes occurs in very narrow temperature and pH ranges: no temperature-based transition for pH 6.0, 40-50 °C transition for pH 6.5, and 25-35 °C for pH 7.0. To achieve these shape transitions, temperature/pH-responsive polymer surfactants of poly( N-(2-(diethylamino)ethyl)acrylamide- r- N-isopropylacrylamide) are designed to induce dramatic changes in relative solubility and their location in response to temperature and pH changes near physiological conditions. In addition, the BCP particles exhibit reversible shape-transforming behavior according to orthogonal temperature and pH changes. Colorimetric measurements of temperature and pH changes are enabled by shape-transforming properties combined with selective positioning of dyes, suggesting promising potential for these particles in clinical and biomedical applications.

Visual and Precise Detection of pH Values under Extreme Acidic and Strong Basic Environments by Cellulose-Based Superior Sensor

Precise determination of pH values with an instrument-free mode is challenging and practical in industry processes, life science, and environmental monitoring. Here, taking advantage of the intramolecular charge transfer process, we construct a cellulose-based superior pH sensor, Phen-MDI-CA, which contains a highly sensitive, pH-responsive, and extended conjugation structure by combining phenanthroline moiety as a chromophore with urea group as a bridge. The resultant Phen-MDI-CA can precisely and visually determine pH values under extreme acidic and strong basic environments, depending on the different colors. In visible light mode, Phen-MDI-CA can readily discriminate the pH values of 14.0, 13.0, 12.0, and 11.0 and distinguish pH 2.0 from 1.0 by the naked eye. In fluorescent mode, Phen-MDI-CA can recognize more accurate pH values of pH 11.6-13.2 at a 0.2-0.4 pH interval by the high-contrasting color change. After addition of pH-irresponsive dyes as the reference, the corresponding ratiometric systems exhibit different colors at a 0.2-0.4 pH interval during the pH values of 11.0-14.0 and 1.0-2.0. Benefiting from the excellent formability, the Phen-MDI-CA was readily fabricated into pH test strips by coating method. To our knowledge, this is the first study to monitor extreme acidity and strong basicity in such precise pH values with an instrument-free mode.

Do the properties of gels constructed by interlinking triply-responsive microgels follow from those of the building blocks?

Microgels (MGs) are swellable crosslinked polymer colloids. They can also be used as the only building block to construct nanostructured hydrogels which are denoted as doubly crosslinked microgels (DX MGs). Here, new triply responsive DX MGs comprised of interlinked MGs of oligo(ethylene glycol)methacrylate (OEGMA), 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA), methacrylic acid (MAA) and a o-nitrobenzyl-based UV photocleavable crosslinker are investigated. The MGs swelled or collapsed in response to temperature and pH changes. These behaviours were rationalised with a generic model using Monte Carlo simulations. The MGs also degraded when UV irradiated due to photocleavage of nPh. DX MGs were assembled from the MGs to give injectable gels that were not cytotoxic to nucleus pulposus cells. Comparison of the responsive properties of the DX MGs and MGs showed that the temperature and pH responses of the former were mostly governed by the latter. However, two key differences were found. Firstly, whilst increasing the crosslinker mol% in the MG building blocks (x) did not change MG particle swelling, the compression modulus (E) and swelling of the DX MG gels were strongly affected by x. The E value for the gels was tuneable using x which is a potentially useful new observation for DX MGs. Secondly, UV irradiation of the DX MGs enhanced gel mechanical photostability in contrast to the behaviour of the MGs. We find that the properties of the DX MGs do not simply follow those of the parent MGs and propose mechanisms to account for the differences. The new family of multi-responsive DX MGs presented in this study have potential application for soft tissue repair as injectable gels or as gel implants which report sterilisation.

Strain rate dependent nanostructure of hydrogels with reversible hydrophobic associations during uniaxial extension

An energy dissipation mechanism during deformation is required to impart toughness to hydrogels. Here we describe how in situ small angle X-ray scattering (SAXS) provides insight into possible energy dissipation mechanisms for a tough hydrogel based on an amphiphilic copolymer where nanoscale associations of the hydrophobic moieties act as effective crosslinks. The mechanical properties of the hydrogels are intimately coupled with the nanostructure that provides reversible crosslinks and evolves during deformation. As the extension rate increases, more mechanical energy is dissipated from rearrangements of the crosslinks. The scattering is consistent with hopping of hydrophobes between the nanoscale aggregates as the primary rearrangement mechanism. This rearrangement changes the network conformation that leads to non-affine deformation, where the change in the nanostructure dimension from SAXS is less than 15% of the total macroscopic strain. These nanostructure changes are rate dependent and correlated with the relaxation time of the hydrogel. At low strain rate (0.15% s-1), no significant change of the nanostructure was observed, whereas at higher strain rates (1.5% s-1 and 8.4% s-1) significant nanostructure anisotropy occurred during extension. These differences are attributed to the ability for the network chains to rearrange on the time scale of the deformation; when the characteristic time for extension is longer than the average segmental relaxation time, no significant change in nanostructure occurs on uniaxial extension. These results illustrate the importance of strain rate in the mechanical characterization and consideration of relaxation time in the design of tough hydrogels with reversible crosslinks.

Light and ferric ion responsive fluorochromic hydrogels with high strength and self-healing ability

Here, light and ferric ion (Fe³⁺) responsive fluorochromic hydrogels with high strength and self-healing ability were designed and synthesized.

Triply responsive coumarin-based microgels with remarkably large photo-switchable swelling

Using two different wavelengths of UV light enables remarkably strong photo-switchable swelling of pH- and temperature-responsive microgels and photo-release of doxorubicin.

Microcapsules Containing pH-Responsive, Fluorescent Polymer-Integrated MoS2: An Effective Platform for in Situ pH Sensing and Photothermal Heating

We report the design of a novel microcapsule platform for in situ pH sensing and photothermal heating, which involves the encapsulation of pH-responsive polymer-coated molybdenum disulfide (MoS₂) nanosheets (NSs) in microcapsules with an aqueous core and a semipermeable polymeric shell. The MoS₂ NSs were functionalized with pH-responsive polymers having fluorescent groups at the distal end to provide pH-sensitive Förster resonance energy transfer (FRET) effect. The pH-responsive polymers were carefully designed to produce a dramatic change in the polymer conformation, which translated to a change in the FRET efficiency near pH 7.0 in response to subtle pH changes, enabling the detection of cancer cells. The pH-sensitive MoS₂ NSs were microfluidically encapsulated within semipermeable membranes to yield microcapsules with a uniform size and composition. The microcapsules retained the MoS₂ NSs without leakage while allowing the diffusion of small ions and water through the membrane. At the same time, the membranes excluded adhesive proteins and lipids in the surrounding media, protecting the encapsulated MoS₂ NSs from deactivation and enabling in situ pH monitoring. Moreover, the encapsulated MoS₂ NSs showed high-performance photothermal heating, rendering the dual-functional microcapsules highly suitable for cancer diagnosis and treatment.