Supramolecular Self-Assembly of Methylated Rotaxanes for Solid Polymer Electrolyte Application

Thiourea-based rotaxanes: anion transport across synthetic lipid bilayers and antibacterial activity against Staphylococcus aureus

We report the synthesis of two rotaxanes (1 and 2) whose rings have appended thiourea units for the selective recognition of Cl- anions. Rotaxane 1 transports Cl- across synthetic lipid bilayers more efficiently than 2, exhibiting EC50 values of 0.243 mol% versus 0.736 mol%, respectively. A control rotaxane (3) without the thiourea units and the individual axle (4) also showed Cl- transport, although with much lower efficiency (EC50 values of 4.044 mol% and 4.986 mol%). The unthreaded ring (5) showed the lowest transport activity. This trend highlights the advantage of the interlocked system with a ring containing thiourea units. We also investigated how the membrane composition of liposomes influences the transport activity of 1 and 2, observing higher Cl- transport in membranes with higher fluidity. Additionally, we demonstrated that rotaxane 1 can kill drug-resistant and osmotolerant Staphylococcus aureus when used in combination with NaCl or arachidonic acid. The latter is known to increase the fluidity of the membrane in S. aureus, highlighting cooperative behavior. This work provides new insights into how various structural features and the membrane environment influence the anion transport activity of rotaxanes, offering important design principles for optimizing future rotaxanes for biomedical and other applications.

Highly Tough Slide-Crosslinked Gel Polymer Electrolyte for Stable Lithium Metal Batteries

Gel polymer electrolytes (GPEs) hold great promise for the practical application of lithium metal batteries. However, conventional GPEs hardly resists lithium dendrites growth and maintains long-term cycling stability of the battery due to its poor mechanical performance. Inspired by the slide-ring structure of polyrotaxanes (PRs), herein we developed a dynamic slide-crosslinked gel polymer electrolyte (SCGPE) with extraordinary stretchability of 970.93 % and mechanical strength of 1.15 MPa, which is helpful to buffer the volume change of electrodes and maintain mechanical integrity of the battery structure during cycling. Notably, the PRs structures can provide fast ion transport channels to obtain high ionic conductivity of 1.73×10-3 S cm-1 at 30 °C. Additionally, the strong polar groups in SCGPE restrict the free movement of anions to achieve high lithium-ion transference number of 0.71, which is favorable to enhance Li+ transport dynamics and induce uniform Li+ deposition. Benefiting from these features, the constructed Li|SCGPE-3|LFP cells exhibit ultra-long and stable cycle life over 1000 cycles and high-capacity retention (89.6 % after 1000 cycles). Even at a high rate of 16 C, the cells deliver a high capacity of 79.2 mAh g-1. The slide-crosslinking strategy in this work provides a new perspective on the design of advanced GPEs for LMBs.

Effects of a Mechanically Interlocked Structure on Ionic Conductivity in Polyrotaxane-Based Polymer Electrolytes

Polyrotaxane (PR) is a mechanically interlocked polymer (MIP) utilized as an electrolyte because of its distinctive property of dynamic molecular mobility. While numerous studies have concentrated on modifying external properties to decrease high crystallinity, few have explored the control of intrinsic properties. This study examines the crystalline properties and molecular mobility of PR-based electrolytes, along with their effects on ionic conductivity, by manipulating intrinsic properties. By systematically varying the inclusion ratio, we demonstrate that lower inclusion ratios lead to reduced crystallinity, enhancing molecular mobility. Consequently, 100PRE exhibits decreased crystallinity due to lower aggregation probabilities of α-cyclodextrins (α-CDs), longer T2 relaxation times (0.215 s), and higher ionic conductivity (3.4 × 10-3 S cm-1 at 25 °C).

Porous Cyclodextrin Polymer Enables Dendrite-Free and Ultra-Long Life Solid-State Zn-I2 Batteries

Zn-I2 batteries have attracted attention due to their low cost, safety, and environmental friendliness. However, their performance is still limited by the irreversible growth of Zn dendrites, hydrogen evolution reactions, corrosion, and shuttle effect of polyiodide. In this work, we have prepared a new porous polymer (CD-Si) by nucleophilic reaction of β-cyclodextrin with SiCl4 , and CD-Si is applied to the solid polymer electrolyte (denoted PEO/PVDF/CD-Si) to solve above-mentioned problems. Through the anchoring of the CD-Si, a conductive network with dual transmission channels was successfully constructed. Due to the non-covalent anchoring effect, the ionic conductivity of the solid polymer electrolytes (SPE) can reach 1.64×10-3  S cm-1 at 25 °C. The assembled symmetrical batteries can achieve highly reversible dendrite-free galvanizing/stripping (stable cycling for 7500 h at 5 mA cm-2 and 1200 h at 20 mA cm-2 ). The solid-state Zn-I2 battery shows an ultra-long life of over 35,000 cycles at 2 A g-1 . Molecular dynamics simulations are performed to elucidate the working mechanism of CD-Si in the polymer matrix. This work provides a novel strategy towards solid electrolytes for Zn-I2 batteries.

Dendritic Solid Polymer Electrolytes: A New Paradigm for High-Performance Lithium-Based Batteries

Li-ions battery is widely used and recognized, but its energy density based on organic electrolytes has approached the theoretical upper limit, while the use of organic electrolytes also brings some safety hazards (leakage and flammability). Polymer electrolytes (PEs) are expected to fundamentally solve the safety problem and improve energy density. Therefore, Li-ions battery based on solid PE has become a research hotspot in recent years. However, low ionic conductivity and poor mechanical properties, as well as a narrow electrochemical window limit its further development. Dendritic PEs with unique topology structure has low crystallinity, high segmental mobility, and reduced chain entanglement, providing a new avenue for designing high-performance PEs. In this review, the basic concept and synthetic chemistry of dendritic polymers are first introduced. Then, this story will turn to how to balance the mechanical properties, ionic conductivity, and electrochemical stability of dendritic PEs from synthetic chemistry. In addition, accomplishments on dendritic PEs based on different synthesis strategies and recent advances in battery applications are summarized and discussed. Subsequently, the ionic transport mechanism and interfacial interaction are deeply analyzed. In the end, the challenges and prospects are outlined to promote further development in this booming field.

Cyclodextrins for Lithium Batteries Applications

Due to their high energy and power density, lithium-ion batteries (LIBs) have gained popularity in response to the demand for effective energy storage solutions. The importance of the electrode architecture in determining battery performance highlights the demand for optimization. By developing useful organic polymers, cyclodextrin architectures have been investigated to improve the performance of Li-based batteries. The macrocyclic oligosaccharides known as cyclodextrins (CDs) have relatively hydrophobic cavities that can enclose other molecules. There are many industries where this "host-guest" relationship has been found useful. The hydrogen bonding and suitable inner cavity diameter of CD have led to its selection as a lithium-ion diffusion channel. CDs have also been used as solid electrolytes for solid-state batteries and as separators and binders to ensure adhesion between electrode components. This review gives a general overview of CD-based materials and how they are used in battery components, highlighting their advantages.

Natural Pyranosyl Materials: Potential Applications in Solid-State Batteries

Solid-state batteries have become one of the hottest research areas today, due to the use of solid-state electrolytes enabling the high safety and energy density. Because of the interaction with electrolyte salts and the abundant ion transport sites, natural polysaccharide polymers with rich functional groups such as -OH, -OR or -COO^- etc. have been applied in solid-state electrolytes and have the merits of possibly high ionic conductivity and sustainability. This review summarizes the recent progress of natural polysaccharides and derivatives for polymer electrolytes, which will stimulate further interest in the application of polysaccharides for solid-state batteries.

Probing distribution and dynamics of lithium ions in supermolecule β-CD-PEO/Li+ solid polymer electrolytes via solid-state NMR

In this work, the distribution and dynamics of Li⁺ ions in β-CD-PEO/Li⁺ (β-CD, β-cyclodextrin; PEO, polyethylene-oxides) crystalline polymer electrolytes were investigated by solid-state NMR to enlighten the ionic conduction mechanism. Specifically, ⁷Li-⁶Li REDOR NMR and variable-contact-time ¹H-⁶Li CP/MAS NMR were adopted for the study. The results demonstrate that Li⁺ ions coordinated by polymer chains have relatively compact spatial density and fast dynamics, which facilitate the improvement of the electrochemical properties. Additionally, the variation of the distribution and dynamics of the Li⁺ ions and the ionic conduction mechanism were studied and discussed by altering the amount of the Li⁺ ions. This work deepens our understanding of the distribution and dynamics of Li⁺ ions in β-CD-PEO/Li⁺ crystals and demonstrates possible future applications of solid-state NMR on the study of the polymer electrolytes.

Rational design of a topological polymeric solid electrolyte for high-performance all-solid-state alkali metal batteries

Poly(ethylene oxide)-based solid-state electrolytes are widely considered promising candidates for the next generation of lithium and sodium metal batteries. However, several challenges, including low oxidation resistance and low cation transference number, hinder poly(ethylene oxide)-based electrolytes for broad applications. To circumvent these issues, here, we propose the design, synthesis and application of a fluoropolymer, i.e., poly(2,2,2-trifluoroethyl methacrylate). This polymer, when introduced into a poly(ethylene oxide)-based solid electrolyte, improves the electrochemical window stability and transference number. Via multiple physicochemical and theoretical characterizations, we identify the presence of tailored supramolecular bonds and peculiar morphological structures as the main factors responsible for the improved electrochemical performances. The polymeric solid electrolyte is also investigated in full lithium and sodium metal lab-scale cells. Interestingly, when tested in a single-layer pouch cell configuration in combination with a Li metal negative electrode and a LiMn_0.6Fe_0.4PO₄-based positive electrode, the polymeric solid-state electrolyte enables 200 cycles at 42 mA·g⁻¹ and 70 °C with a stable discharge capacity of approximately 2.5 mAh when an external pressure of 0.28 MPa is applied.

Solid-state polymer electrolytes are crucial for developing future rechargeable batteries, but they are still limited in performance. Here, the authors designed a topological polymeric solid electrolyte, enabling an all-solid-state high-voltage lithium metal pouch cell to cycle 200 times efficiently.

Cyclodextrin-Integrated PEO-Based Composite Solid Electrolytes for High-Rate and Ultrastable All-Solid-State Lithium Batteries

Poly(ethylene oxide) (PEO)-based composite solid electrolytes (CSEs) are considered as one of the most promising candidates for all-solid-state lithium batteries (ASSLBs). However, a key challenge for their further development is to solve the main issues of low ionic conductivity and poor mechanical strength, which can lead to insufficient capacity and stability. Herein, β-cyclodextrin (β-CD) is first demonstrated as a multifunctional filler that can form a continuous hydrogen bond network with the ether oxygen unit from the PEO matrix, thus improving the comprehensive performances of the PEO-based CSE. By relevant characterizations, it is demonstrated that β-CD is uniformly dispersed into the PEO substrate, inducing adequate dissociation of lithium salt and enhancing mechanical strength through hydrogen bond interactions. In a Li/Li symmetric battery, the β-CD-integrated PEO-based (PEO-LiTFSI-15% β-CD) CSE works well at a critical current density up to 1.0 mA cm^-2 and retains stable lithium plating/stripping for more than 1000 h. Such reliable properties also enable its superior performance in LiFePO₄-based ASSLBs, with specific capacities of 123.6 and 114.0 mA h g^-1 as well as about 100 and 81.8% capacity retention over 300 and 700 cycles at 1 and 2 C (1 C = 170 mA g^-1), respectively.

Post-synthesis modification of slide-ring gels for thermal and mechanical reconfiguration

Ring-sliding behavior in polyrotaxanes imbues gels, elastomers, and glasses with remarkable stress-dissipation and actuation properties. Since these properties can be modulated and tuned by structural parameters, many efforts have been devoted to developing synthetic protocols that define the structures and properties of slide-ring materials. We introduce post-synthetic modifications of slide-ring gels derived from unmodified α-cyclodextrin and poly(ethylene glycol) polyrotaxanes that enable (i) actuation and control of the thermo-responsive lower critical solution temperature (LCST) behavior of ring-modified slide-ring hydrogels, and (ii) chemically bonding separate gels into hybrid or shape-reconfigured macro-structures with a slide-ring adhesive solution. The mechanical properties of the post-modified gels have been characterized by shear rheology and uniaxial tensile tests, while the corresponding xerogels were characterized by wide-angle X-ray scattering. These demonstrations show that post-synthetic modification offers a practical solution for re-configuring the properties and shapes of slide-ring gels.

Elastomers without Covalent Cross-Linking: Concatenated Rings Giving Rise to Elasticity

There is intense interest in making mechanically stable elastomers with properties resembling those of human muscles for use in soft robotics. Recently, a polydimethylsiloxane (PDMS) elastomer prepared without the use of cross-linking moieties from heterobifunctional PDMS macromonomers of intermediate molecular weight has been shown to exhibit surprising inherent softness and excellent stability upon both large deformation and swelling, in clear contradiction of classical rubber elasticity theories. In this work, this unexpected elasticity is shown to originate from concatenated rings.

Polyrotaxanes created by end-capping polypseudorotaxanes self-assembled from β-CDs with distal azide terminated PHEMA using propargylamine monosubstituted β-CDs

When a distal azide terminated PHEMA was allowed to self-assemble with varying amounts of β-CDs in water, followed by in situ reaction with PA-β-CDs via the CuAAC, linear polyrotaxanes (PRs) and a mixture of linear and hyperbranched PRs were obtained.

Intermolecular Chemistry in Solid Polymer Electrolytes for High-Energy-Density Lithium Batteries

Solid polymer electrolytes (SPEs) have aroused wide interest in lithium batteries because of their sufficient mechanical properties, superior safety performances, and excellent processability. However, ionic conductivity and high-voltage compatibility of SPEs are still yet to meet the requirement of future energy-storage systems, representing significant barriers to progress. In this regard, intermolecular interactions in SPEs have attracted attention, and they can significantly impact on the Li⁺ motion and frontier orbital energy level of SPEs. Recent advances in improving electrochemcial performance of SPEs are reviewed, and the underlying mechanism of these proposed strategies related to intermolecular interaction is discussed, including ion-dipole, hydrogen bonds, π-π stacking, and Lewis acid-base interactions. It is hoped that this review can inspire a deeper consideration on this critical issue, which can pave new pathway to improve ionic conductivity and high-voltage performance of SPEs.

Building Better Batteries in the Solid State: A Review

Most of the current commercialized lithium batteries employ liquid electrolytes, despite their vulnerability to battery fire hazards, because they avoid the formation of dendrites on the anode side, which is commonly encountered in solid-state batteries. In a review two years ago, we focused on the challenges and issues facing lithium metal for solid-state rechargeable batteries, pointed to the progress made in addressing this drawback, and concluded that a situation could be envisioned where solid-state batteries would again win over liquid batteries for different applications in the near future. However, an additional drawback of solid-state batteries is the lower ionic conductivity of the electrolyte. Therefore, extensive research efforts have been invested in the last few years to overcome this problem, the reward of which has been significant progress. It is the purpose of this review to report these recent works and the state of the art on solid electrolytes. In addition to solid electrolytes stricto sensu, there are other electrolytes that are mainly solids, but with some added liquid. In some cases, the amount of liquid added is only on the microliter scale; the addition of liquid is aimed at only improving the contact between a solid-state electrolyte and an electrode, for instance. In some other cases, the amount of liquid is larger, as in the case of gel polymers. It is also an acceptable solution if the amount of liquid is small enough to maintain the safety of the cell; such cases are also considered in this review. Different chemistries are examined, including not only Li-air, Li-O2, and Li-S, but also sodium-ion batteries, which are also subject to intensive research. The challenges toward commercialization are also considered.

Supramolecular Fluorine Magnetic Resonance Spectroscopy Probe Polymer Based on Passerini Bifunctional Monomer

A water-soluble fluorine magnetic resonance spectroscopy host-guest probe, P(HPA-co-AdamCF₃A), was successfully constructed from the facile synthesis of a bifunctional monomer via a quantitative Passerini reaction. Supramolecular complexation with (2-hydroxypropyl)-β-cyclodextrin promoted a change in the chemical environment, leading to modulation of both the relaxation properties as well as chemical shift of the fluorine moieties. This change was used to probe the supramolecular interaction by ¹⁹F MRI spectroscopy and give insight into fluorine probe formulation. This work provides a fundamental basis for an ¹⁹F MR imaging tracer capable of assessing host-guest inclusion and a potential model to follow the fate of a drug delivery system in vivo.

Unexpected Polypseudorotaxanes Formed from the Self-assembly of β-Cyclodextrins with Poly( N-isopropylacrylamide) Homo- and Copolymers

Compared with polypseudorotaxanes (PPRs) formed from the self-assembly of β-cyclodextrins (β-CDs) with poly(propylene glycol) (PPG) and γ-CDs with poly( N-isopropylacrylamide) (PNIPAAm), the ratio of the inner cavity size of β-CD to the cross-sectional area of PNIPAAm appears not appropriate for their self-assembly. For a better understanding of the possibility of β-CDs including PNIPAAm and the crystal structure of PPRs formed therefrom, the PNIPAAm homo- and copolymers were subjected to self-assembly with β-CDs in an aqueous solution at room temperature. The results revealed that when β-CDs meet thicker PNIPAAms, the self-assembly takes place, not only giving rise to PPRs by a manner of main-chain inclusion complexation but also presenting the PPRs a matched over-fit crystal structure different from those of either a matched tight-fit β-CD-PPG PPR or a mismatched over-fit γ-CD-PNIPAAm PPR. This is most likely due to the thicker PNIPAAm adapting its unfavorable main-chain cross-sectional area to fit into the cavity of β-CDs by changing the side-chain conformations. Based on the X-ray diffraction patterns, a monoclinic crystal system was created from these PPRs and the unit cell parameters calculated were as follows: a = 15.3 Å, b = 10.3 Å, and c = 21.2 Å; β = 110.3°; and space group P2. It suggested that this matched over-fit crystal structure would possess a Mosaic crystal structure rather than a typical channel-like one.

Enhanced electrochemical CO2 reduction selectivity by application of self-assembled polymer microparticles to a silver electrode

The self-assembled PS-modified Ag electrodes increased the selectivity for CO₂ reduction to CO and inhibited H₂ generation.

How Does PHEMA Pass through the Cavity of γ-CDs to Create Mismatched Overfit Polypseudorotaxanes?

A syndiotactic-rich PHEMA oligomer ( rr = 74%, DP = 29, PDI = 1.19) was synthesized and subsequently subjected to self-assembly with a varying amount of γ-CDs in its aqueous solution to create mismatched overfit polypseudorotaxanes (PPRs). The inclusion complexation proceeded in an obvious mismatched manner between the cavity of γ-CDs and the cross-sectional area of an incoming PHEMA chain. The 2D-NOESY NMR analysis provided direct evidence indicating that two adjacent pendant hydroxyethyl groups in PHEMA preferably adopt a curled conformation to pass through the cavity of γ-CDs, giving the PPRs characteristics of a mismatched overfit instead of a matched tight-fit crystal structure. The results suggested that the mutual adaption of pendant side chains of HEMA units with the cavity geometry of γ-CDs would play a dominant role in this unfavorable overfit inclusion complexation besides the size of γ-CDs and the stereoregularity of the PHEMA chain.