Converging the Hole Mobility of Poly(2-N-carbazoylethyl acrylate) with Conjugated Polymers by Tuning Isotacticity

Stereoselective Polymerization of 3,6-Disubstituted N-Vinylcarbazoles

Poly(N-vinylcarbazole) (PNVC-H) is a valuable nonconjugated photoconductive polymer, but the free radical polymerization conditions typically used for its synthesis do not control polymer stereochemistry and are not tolerant to many substituted N-vinylcarbazoles. Here, we report the stereoselective cationic polymerization of a series of 3,6-disubtituted N-vinylcarbazole derivatives using a chiral scandium-bis(oxazoline) Lewis acid catalyst. The combination of asymmetric ion-pairing catalysis and inherent monomer stereoelectronics facilitated stereoselective polymerization at room temperature, which enabled the polymerization of less soluble 3,6-disubstituted-N-vinylcarbazole derivatives. Isotactic halogen-substituted PNVCs demonstrated self-assembly in solution through halogen-halogen bonding, which was not observed in their atactic counterparts. Initial spectral characterization displayed a wide range of excitation-emission profiles for substituted PNVCs, which demonstrate the promise of these materials as a new class of nonconjugated photoconductive polymers for optoelectronic applications. Overall, these results showcase a diverse class of isotactic poly(N-vinylcarbazoles), highlight the benefits of identifying alternative stereocontrol mechanisms for polymerization, and expand the suite of accessible nonconjugated hole-transport materials.

Relating Structure to Properties in Non-Conjugated Pendant Electroactive Polymers

Non-conjugated pendant electroactive polymers (NCPEPs) are an emerging class of polymers that offer the potential of combining the desirable optoelectronic properties of conjugated polymers with the superior synthetic methodologies and stability of traditional non-conjugated polymers. Despite an increasing number of studies focused on NCPEPs, particularly on understanding fundamental structure-property relationships, no attempts have been made to provide an overview on established relationships to date. This review showcases selected reports on NCPEP homopolymers and copolymers that demonstrate how optical, electronic, and physical properties of the polymers are affected by tuning of key structural variables such as the chemical structure of the polymer backbone, molecular weight, tacticity, spacer length, the nature of the pendant group, and in the case of copolymers the ratios between different comonomers and between individual polymer blocks. Correlation of structural features with improved π-stacking and enhanced charge carrier mobility serve as the primary figures of merit in evaluating impact on NCPEP properties. While this review is not intended to serve as a comprehensive summary of all reports on tuning of structural parameters in NCPEPs, it highlights relevant established structure-property relationships that can serve as a guideline for more targeted design of novel NCPEPs in the future.

Design of Microstructure-Engineered Polymers for Energy and Environmental Conservation

With the ever-growing demand for sustainability, designing polymeric materials using readily accessible feedstocks provides potential solutions to address the challenges in energy and environmental conservation. Complementing the prevailing strategy of varying chemical composition, engineering microstructures of polymer chains by precisely controlling their chain length distribution, main chain regio-/stereoregularity, monomer or segment sequence, and architecture creates a powerful toolbox to rapidly access diversified material properties. In this Perspective, we lay out recent advances in utilizing appropriately designed polymers in a wide range of applications such as plastic recycling, water purification, and solar energy storage and conversion. With decoupled structural parameters, these studies have established various microstructure-function relationships. Given the progress outlined here, we envision that the microstructure-engineering strategy will accelerate the design and optimization of polymeric materials to meet sustainability criteria.

Synthesis of Block Copolymers Containing Stereoregular Pendant Electroactive Blocks

The stereoregular nonconjugated pendant electroactive polymer (NCPEP) poly((N-carbazolylethylthio) propyl methacrylate) (PCzETPMA) has recently shown charge carrier mobilities that are on par with conjugated polymers. Here, we increased the complexity of the architecture for this NCPEP by introducing a polystyrene (PS) block via an anionic, living polymerization yielding a family of PS-b-PCzETPMA block copolymers as the first examples of NCPEP-block-copolymers with controlled stereoregularity of the NCPEP-blocks. Through this methodology we were able to control the molar masses, PS to PCzETPMA block ratios, and tacticities of the PCzETPMA-blocks. We found all three parameters to significantly impact the hole mobilities (μ_h) of the resulting copolymers, which increased with higher molar masses, longer PCzETPMA-blocks, and higher isotacticity of the PCzETPMA-block, giving the best μ_h of 2.33 × 10^-5 cm²/V·s after annealing at 150 °C for the highest molar mass copolymer with a dominant isotactic PCzETPMA-block. This work is the first reported synthesis of a block copolymer bearing a NCPEP-block with a controlled tacticity and demonstrates that such complex polymer architectures can be realized with NCPEPs while maintaining control over their stereoregularity and without significantly suppressing the hole mobility in the resulting copolymers.

Contrasting the Charge Carrier Mobility of Isotactic, Syndiotactic, and Atactic Poly((N-carbazolylethylthio)propyl methacrylate)

Isotactic nonconjugated pendant electroactive polymers (NCPEPs) have recently shown potential to achieve comparable charge carrier mobilities with conjugated polymers. Here we report the broader influence of tacticity in NCPEPs, using poly((N-carbazolylethylthio)propyl methacrylate) (PCzETPMA) as a model polymer. We utilized the thiol-ene reaction as an efficient postpolymerization functionalization method to achieve pendant polymers with high isotacticity and syndiotacticity. We found that a stereoregular isotactic polymer showed ∼100 times increased hole mobility (μh) as compared to both atactic and low molecular weight syndiotactic PCzETPMA, achieving μh of 2.19 × 10-4 cm2 V-1 s-1 after annealing at 120 °C. High molecular weight syndiotactic PCzETPMA gave ∼10 times higher μh than its atactic counterpart, comparable to isotactic PCzETPMA after annealing at 150 °C. Importantly, high molecular weight syndiotactic PCzETPMA showed a dramatic increase in μh to 1.82 × 10-3 cm2 V-1 s-1 when measured after annealing at 210 °C, which surpassed the well-known conjugated polymer poly(3-hexylthiophene) (P3HT) (μh = 4.51 × 10-4 cm2 V-1 s-1). MD simulations indicated short-range π-π stacked ordering in the case of stereoregular isotactic and syndiotactic polymers. This work is the first report of charge carrier mobilities in syndiotactic NCPEPs and demonstrates that the tacticity, annealing conditions, and molecular weight of NCPEPs can strongly affect μh.

Fabrication of PCDTBT Conductive Network via Phase Separation

Poly[N-9'-hepta-decanyl-2,7-carbazole-alt-5-5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) is a stable semiconducting polymer with high rigidity in its molecular chains, which makes it difficult to organize into an ordered structure and affects the device performance. Here, a PCDTBT network consisting of aggregates and nanofibers in thin films was fabricated through the phase separation of mixed PCDTBT and polyethylene glycol (PEG). Using atomic force microscopy (AFM), the effect of the blending conditions (weight ratio, solution concentration, and molecular weight) and processing conditions (substrate temperature and solvent) on the resulting phase-separated morphologies of the blend films after a selective washing procedure was studied. It was found that the phase-separated structure's transition from an island to a continuous structure occurred when the weight ratio of PCDTBT/PEG changed from 2:8 to 7:3. Increasing the solution concentration from 0.1 to 3.0 wt% led to an increase in both the height of the PCDTBT aggregate and the width of the nanofiber. When the molecular weight of the PEG was increased, the film exhibited a larger PCDTBT aggregate size. Meanwhile, denser nanofibers were found in films prepared using PCDTBT with higher molecular weight. Furthermore, the electrical characteristics of the PCDTBT network were measured using conductive AFM. Our findings suggest that phase separation plays an important role in improving the molecular chain diffusion rate and fabricating the PCDTBT network.

Influence of Alkyl Chain Spacer Length on the Charge Carrier Mobility of Isotactic Poly(N-carbazolylalkyl acrylates)

In the search for semiconducting polymer alternatives to conjugated polymers, stereoregular nonconjugated pendant electroactive polymers (NCPEPs) have recently shown competitive hole mobilities with conjugated polymers and a dramatic increase in mobility relative to atactic analogues. Here we investigate one of the key structural variables of NCPEPs: the flexible alkyl spacer that separates the electroactive pendant from the backbone. We investigate a straightforward postpolymerization functionalization synthetic method to synthesize such polymers with high isotacticity using poly(N-carbazolylalkyl acrylate) as a model system, where the alkyl chain spacer in the NCPEPs is varied from 2 to 12 carbons. We observed that the hole mobility increased from the two-carbon spacer, resulting in the highest mobility upon thermal annealing with a four-carbon spacer for 75% isotactic polymers and with a six-carbon spacer for 87% isotactic polymers. As such, we have demonstrated an important role of the spacer chain in influencing mobility. For all spacer lengths, higher mobilities were measured with the more isotactic polymer. While physical characterization of the largely amorphous polymers yielded little insight into the structure-function relationships, DFT and MD simulations indicated helical structures for the polymers where intermolecular short-range π-stacking is observed and is affected by spacer chain length. This work demonstrates that both the degree of stereoregularity and the spacer chain length play a role in determining the hole mobility in NCPEPs.