100th Anniversary of Macromolecular Science Viewpoint: Photochemical Reaction Orthogonality in Modern Macromolecular Science

On photokinetics under polychromatic light

Since the dawn of photochemistry 150 years ago, photoreactions have been conducted under polychromatic light. However, despite the pivotal role that photokinetics should naturally play for such reactive photosystems, the literature lacks a comprehensive description of that area. Indeed, one fails to identify explicit model integrated rate laws for these reactions, a characteristic type for their kinetic behavior, or their kinetic order. In addition, there is no consensus in the community on standardized investigative tools to evaluate the reactivity of these photosystems, nor are there venues for the discussion of such photokinetic issues. The present work is a contribution addressing some of these knowledge gaps. It proposes an unprecedented general formula capable of mapping out the kinetic traces of photoreactions under polychromatic light irradiation. This article quantitatively discusses several reaction situations, including the effects of initial reactant concentration and the presence of spectator molecules. It also develops a methodology for standardizing actinometers and defines and describes both the spectral range of highest reactivity and the photonic yield. The validity of the model equation has been proven by comparing its results to both theoretical counterparts and those generated by fourth-order Runge-Kutta numerical calculations. For the first time, a confirmation of the Φ -order character of the kinetics under polychromatic light was established.

A Photoreactor-Interfaced Mass Spectrometer: An Online Platform to Monitor Photochemical Reactions

An experimental platform is reported that allows for the online characterization of photochemical reactions by coupling a continuous flow photoreactor, equipped with LED light irradiation and a dual-tipped ESI source, directly to a mass spectrometer with electrospray ionization. The capabilities of this platform are demonstrated with two classes of photoreactions: (1) the photopolymerization of methyl methacrylate and (2) photocatalyzed alkyne insertion into a 1,2,3-benzotriazinone. The online technique provides rapid information to inform the underlying photochemical mechanism and evaluate the overall photochemistry.

Cooperative Network Formation via Two-Colour Light-Activated λ-Orthogonal Chromophores

Independently addressing photoreactive sites within one molecule with two colours of light is a formidable challenge. Here, we combine two sequence independent λ-orthogonal chromophores in one heterotelechelic dilinker molecule, to exploit their disparate reactivity utilizing the same reaction partner, a maleimide-containing polymer. We demonstrate that polymer network formation only proceeds if two colours of light are employed. Upon single colour irradiation, linker-decorated post-functionalized polymers are generated at either wavelength and in either sequence. Network formation, however, is only achieved by sequential or simultaneous two colour irradiation. The herein introduced photoreactive system demonstrates the power of wavelength orthogonal chemistry in macromolecular synthesis.

Upconversion particle-assisted NIR polymerization enables microdomain gradient photopolymerization at inter-particulate length scale

High crosslinking and low shrinkage stress are difficult to reconcile in the preparation of performance-enhancing photopolymer materials. Here we report the unique mechanism of upconversion particles-assisted NIR polymerization (UCAP) in reducing shrinkage stress and enhancing mechanical properties of cured materials. The excited upconversion particle emit UV-vis light with gradient intensity to the surroundings, forming a domain-limited gradient photopolymerization centered on the particle, and the photopolymer grows within this domain. The curing system remains fluid until the percolated photopolymer network is formed and starts gelation at high functional group conversion, with most of the shrinkage stresses generated by the crosslinking reaction having been released prior to gelation. Longer exposures after gelation contribute to a homogeneous solidification of cured material, and polymer materials cured by UCAP exhibit high gel point conversion, low shrinkage stress and strong mechanical properties than those cured by conventional UV polymerization techniques.

Rapid hydrogel formation via tandem visible light photouncaging and bioorthogonal ligation

The formation of benign polymer scaffolds in water using green-light-reactive photocages is described. These efforts pave an avenue toward the fabrication of synthetic scaffolds that can facilitate the study of cellular events for disease diagnosis and treatment. First, a series of boron dipyrromethene (BODIPY) photocages with nitrogen-containing nucleophiles were examined to determine structure-reactivity relationships, which resulted in a >1,000× increase in uncaging yield. Subsequently, photoinduced hydrogel formation in 90 wt % water was accomplished via biorthogonal carbonyl condensation using hydrophilic polymer scaffolds separately containing BODIPY photocages and ortho-phthalaldehyde (OPA) moieties. Spatiotemporal control is demonstrated with light on/off experiments to modulate gel stiffness and masking to provide <100 μm features. Biocompatability of the method was shown through pre-/post-crosslinking cell viability studies. Short term, these studies are anticipated to guide translation to emergent additive manufacturing technology, which, longer term, will enable the development of 3D cell cultures for tissue engineering applications.

A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Additive manufacturing or 3D printing of materials is a prominent process technology which involves the fabrication of materials layer-by-layer or point-by-point in a subsequent manner. With recent advancements in additive manufacturing, the technology has excited a great potential for extension of simple designs to complex multi-material geometries. Vat photopolymerization is a subdivision of additive manufacturing which possesses many attractive features, including excellent printing resolution, high dimensional accuracy, low-cost manufacturing, and the ability to spatially control the material properties. However, the technology is currently limited by design strategies, material chemistries, and equipment limitations. This review aims to provide readers with a comprehensive comparison of different additive manufacturing technologies along with detailed knowledge on advances in multi-material vat photopolymerization technologies. Furthermore, we describe popular material chemistries both from the past and more recently, along with future prospects to address the material-related limitations of vat photopolymerization. Examples of the impressive multi-material capabilities inspired by nature which are applicable today in multiple areas of life are briefly presented in the applications section. Finally, we describe our point of view on the future prospects of 3D printed multi-material structures as well as on the way forward towards promising further advancements in vat photopolymerization.

Exploiting Wavelength Orthogonality in Photoinitiated RAFT Dispersion Polymerization and Photografting for Monodisperse Surface-Functional Polymeric Microspheres

We report a strategy toward surface-functional polymeric microspheres using a wavelength orthogonality technique that employs photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization and the subsequent photografting under different wavelengths of light. Initial screening of reaction conditions indicated photoreactive polymeric microsphere with uniform sizes could be prepared by using photoinitiator-functionalized macro-RAFT agents under purple light irradiation. Photoreactive polymeric microspheres allowed photografting polymerizations under UV light irradiation, and we further demonstrated the broad scope of this method by photografting acrylamide, acrylic, and methacrylic monomers. Finally, carboxyl-functionalized polymeric microspheres with an exceptional high number of carboxyl groups were successfully prepared by this technique, which permitted extensive surface bioconjugation of model proteins (e.g., streptavidin). This method should expand the capabilities of RAFT dispersion polymerization to afford diverse surface-functional polymeric microspheres for some specific applications.

Rational Design of Photocatalysts for Controlled Polymerization: Effect of Structures on Photocatalytic Activities

Over the past decade, the use of photocatalysts (PCs) in controlled polymerization has brought new opportunities in sophisticated macromolecular synthesis. However, the selection of PCs in these systems has been typically based on laborious trial-and-error strategies. To tackle this limitation, computer-guided rational design of PCs based on knowledge of structure-property-performance relationships has emerged. These rational strategies provide rapid and economic methodologies for tuning the performance and functionality of a polymerization system, thus providing further opportunities for polymer science. This review provides an overview of PCs employed in photocontrolled polymerization systems and summarizes their progression from early systems to the current state-of-the-art. Background theories on electronic transitions are also introduced to establish the structure-property-performance relationships from a perspective of quantum chemistry. Typical examples for each type of structure-property relationships are then presented to enlighten future design of PCs for photocontrolled polymerization.

Organocatalytic orthogonal ATRP and ring-opening polymerization using a single dual-function photocatalyst

Organocatalytic orthogonal atom transfer radical polymerization and ring-opening polymerization have been achieved using a single designer dual-function photocatalyst.

Orthogonal chemistry in the design of rare-earth metal oxyhydrides

Inorganic systems containing two or more kinds of anions, such as rare-earth metal oxyhydrides, have a number of interesting properties that can be used in the design and development of new functional materials with desired characteristics. Chemical synthesis of these materials can be accomplished by oxidation of metal hydrides. However, the oxidation process of a metal hydride is directly accompanied by the release of hydrogen; both processes are a combination of two sequential reactions. This is usually not favorable for the formation and crystallization of the ternary oxyhydride composition. One possible way to overcome this problem is to introduce an appropriate amount of oxygen atoms into certain interstitial positions adjacent to the metal sites of the hydride lattice. Guided by the ideas of orthogonality, we have proposed a theoretical model capable of providing a thorough understanding of the chemical processes occurring in a multicomponent system at the molecular level. This model opens the way for predicting a wide range of new, stable multi-anion compounds of different compositions. It can also control functionality by adding noncovalent interactions between different kinds of anions, which can lead to the formation of chiral structures or a significant increase in ferro- and piezoelectric properties.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Photo Click Reaction of Acylsilanes with Indoles

Light-mediated coupling of acylsilanes with indoles is reported. This photo click reaction occurs under mild conditions (415 nm) mostly in quantitative yield and provides stable silylated N,O-acetals via light mediated siloxycarbene generation with subsequent indole-N-H insertion. We show that this very efficient and fully atom economic coupling process can be applied to conjugate complex systems, as documented by the clicking of carbohydrates with indole alkaloids. The method is also applicable to the conjugation of polymer chains. The linking acetal moiety can be readily cleaved and it is also shown that wavelength-selective coupling and cleavage with acyl silanes bearing a second photoactive moiety is possible. This is documented by a successful polymerization/depolymerization sequence and by a polymer folding/unfolding process.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

Predicting wavelength-dependent photochemical reactivity and selectivity

Predicting the conversion and selectivity of a photochemical experiment is a conceptually different challenge compared to thermally induced reactivity. Photochemical transformations do not currently have the same level of generalized analytical treatment due to the nature of light interaction with a photoreactive substrate. Herein, we bridge this critical gap by introducing a framework for the quantitative prediction of the time-dependent progress of photoreactions via common LEDs. A wavelength and concentration dependent reaction quantum yield map of a model photoligation, i.e., the reaction of thioether o-methylbenzaldehydes via o-quinodimethanes with N-ethylmaleimide, is initially determined with a tunable laser system. Combined with experimental parameters, the data are employed to predict LED-light induced conversion through a wavelength-resolved numerical simulation. The model is validated with experiments at varied wavelengths. Importantly, a second algorithm allows the assessment of competing photoreactions and enables the facile design of λ-orthogonal ligation systems based on substituted o-methylbenzaldehydes.

Advances, Challenges, and Opportunities of Poly(γ-butyrolactone)-Based Recyclable Polymers

The discovery and prosperous growth of synthetic polymers have presented both significant advantages and daunting challenges in the last century. To address the issues of environmental pollution and fossil consumption, recyclable, degradable, and/or biobased polymers have been given much attention in the polymer science community. This viewpoint focuses on the emerging fully chemical recyclable poly(γ-butyrolactone)-based polymers. The breakthrough from nonpolymerizable to efficient polymerization is highlighted by the benefits of the development of a series of catalysis for ring-opening polymerization of γ-butyrolactone. Subsequently, the design of γ-butyrolactone derivatives and synthesis of more recyclable polymers are summarized together with the discussions about the structure and property relationship. Finally, the remaining challenges and promising opportunities are suggested in order to provide insights into the further direction for sustainable polymers.

Self-catalyzing photoredox polymerization for recyclable polymer catalysts

A photoactive eosin Y-derived monomer was developed that can induce photoelectron/energy transfer, while simultaneously partaking in the polymerization as a monomer, affording polymer catalysts with tunable eosin Y incorporations.

Solvent Effects and Side Reactions in Organocatalyzed Atom Transfer Radical Polymerization for Enabling the Controlled Polymerization of Acrylates Catalyzed by Diaryl Dihydrophenazines

Investigation of the effects of a solvent on the photophysical and redox properties of the photoredox catalyst (PC), N,N-di(2-naphthyl)-5,10-dihydrophenazine (PC 1), revealed the opportunity to use tetrahydrofuran (THF) to modulate the reactivity of PC 1 toward achieving a controlled organocatalyzed atom transfer radial polymerization (O-ATRP) of acrylates. Compared with dimethylacetamide (DMAc), in tetrahydrofuran (THF), PC 1 exhibits a higher quantum yield of intersystem crossing (ΦISC = 0.02 in DMAc, 0.30 in THF), a longer singlet excited-state lifetime (τ Singlet = 3.81 ns in DMAc, 21.5 ns in THF), and a longer triplet excited-state lifetime (τ Triplet = 4.3 μs in DMAc, 15.2 μs in THF). Destabilization of 1 •+, the proposed polymerization deactivator, in THF leads to an increase in the oxidation potential of this species by 120 mV (E 1/2 0 = 0.22 V vs SCE in DMAc, 0.34 V vs SCE in THF). The O-ATRP of n-butyl acrylate (n-BA) catalyzed by PC 1 proceeds in a more controlled fashion in THF than in DMAc, producing P(n-BA) with low dispersity, Đ (Đ < 1.2). Model reactions and spectroscopic experiments revealed that two initiator-derived alkyl radicals add to the core of PC 1 to form an alkyl-substituted photocatalyst (2) during the polymerization. PC 2 accesses a polar CT excited state that is ~40 meV higher in energy than PC 1 and forms a slightly more oxidizing radical cation (E 1/2 0 = 0.22 V for 1 •+ and 0.25 V for 2 •+ in DMAc). A new O-ATRP procedure was developed wherein PC 1 is converted to 2 in situ. The application of this method enabled the O-ATRP of a number of acrylates to proceed with moderate to good control (Đ = 1.15-1.45 and I* = 83-127%).

Light-intensity switch enabled nonsynchronous growth of fluorinated raspberry-like nanoparticles

Raspberry-like (RB) nanoparticles hold potential for diverse applications due to their hierarchical morphology. Here we developed a novel tandem synthetic approach of nonsynchronous growth based on photo-mediated reversible-deactivation radical polymerization, enabling simple, efficient and bottom-up synthesis of RB nanoparticles of uniform sizes at quantitative conversions of fluorinated monomers. Chain transfer agents of different chain lengths, concentrations and chemical compositions were varied to tune the diameter of RB particles. Importantly, fluorinated RB nanoparticles obtained with this method allow facile post modifications via both covalent bond formation and intermolecular physical interactions without disrupting the RB morphology. The facile nature of this method and versatility of the obtained fluorinated RB materials open new opportunities for the development of functional materials using nanoparticles.

Mixed Polymer Brushes for "Smart" Surfaces

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors. This contribution highlights state-of-the-art MPBs studies, covering synthetic approaches, phase behavior, responsiveness to external stimuli as well as novel applications of MPBs. Current limitations are recognized and possible directions for future studies are identified.

Designing with Light: Advanced 2D, 3D, and 4D Materials

Recent achievements and future opportunities for the design of 2D, 3D, and 4D materials using photochemical reactions are summarized. Light is an attractive stimulus for material design due to its outstanding spatiotemporal control, and its ability to mediate rapid polymerization under moderate reaction temperatures. These features have been significantly enhanced by major advances in light generation/manipulation with light-emitting diodes and optical fiber technologies which now allows for a broad range of cost-effective fabrication protocols. This combination is driving the preparation of sophisticated 2D, 3D, and 4D materials at the nano-, micro-, and macrosize scales. Looking ahead, future challenges and opportunities that will significantly impact the field and help shape the future of light as a versatile and tunable design tool are highlighted.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Visible Light Catalyzed Step-Growth Polymerization through Mizoroki-Heck Coupling Reaction

The results of polymer synthesis via visible light (blue light λ = 465 nm) and a Pd-catalyzed Mizoroki-Heck coupling reaction at ambient temperature are reported. The kinetic study demonstrates that the polymerization rate is faster under light irradiation than that in the dark, affording larger molecular weight of polymer product in the former. A mechanistic study using ¹⁹ F NMR indicates that light can activate the oxidative addition step, increasing the rate of formation of the oxidative addition intermediate. The present work not only reveals a new mechanism of light's effect on Mizoroki-Heck coupling reaction in the absence of sensitizer, but also represents the first example of its application in step-growth polymerization.

Size effect of semiconductor quantum dots as photocatalysts for PET-RAFT polymerization

Larger QDs result in a higher polymerization rate and a better fit ofM_n,GPCwithM_{n,theoretical}for PET-RAFT polymerization using CdSe QDs photocatalysts.

Fluorinated vesicles embedded with Ru-based catalysts as efficient and recyclable nanoreactors for photo-mediated aerobic oxidation

This article reports a versatile platform to prepare efficient nanoreactors containing a variety of catalysts for diverse reactions, especially for aerobic oxidation.

Photoswitchable catalysis using organometallic complexes

Photoswitchable catalysis using organometallic complexes: a ligand design perspective.

Photoregulated reversible addition–fragmentation chain transfer (RAFT) polymerization

Different strategies on photoregulated RAFT polymerization are developed. This minireview summarizes recent advances in photoregulated RAFT polymerization and its applications.

Photo-controlled RAFT polymerization mediated by organic/inorganic hybrid photoredox catalysts: enhanced catalytic efficiency

Photo-controlled RAFT polymerization mediated by an organic/inorganic hybrid photoredox catalyst (ZnTPP–POSS) was performed and showed enhanced catalytic efficiency compared with the ZnTPP photocatalyst.

Two colours of light drive PET–RAFT photoligation

By fusing the realms of photopolymerisation and photoligation, our contribution exploits two orthogonal wavelengths of visible light to readily synthesise and functionalise well defined polymers from a unique dual functionality RAFT agent.

Cationic quaternary ammonium salt-catalyzed LED-induced living radical polymerization within situhalogen exchange

Cationic quaternary ammonium salts were employed as organocatalysts for light-emitting diode (LED)-induced living radical polymerization (LRP) with thein situhalogen exchange of methacrylate monomers.

100th Anniversary of Macromolecular Science Viewpoint: Heterogenous Reversible Deactivation Radical Polymerization at Room Temperature. Recent Advances and Future Opportunities

Heterogenous reversible deactivation radical polymerization (RDRP) has become an important method for the preparation of a diverse set of well-defined polymer materials in dispersed systems. Conducting heterogeneous RDRP at room temperature seems to be a minor adjustment in polymerization technique but this will lead to a great opportunity for functional polymer synthesis, developing of interesting heterogeneous RDRP systems, and better mechanistic insights into heterogeneous RDRP. In this Viewpoint, we highlight some recent advances of room-temperature heterogeneous RDRP that are challenging to achieve via traditional thermally initiated heterogeneous RDRP. We hope that this Viewpoint can provide some inspiration for both experts in this field and new comers, as well as nonexperts who are interested in preparing their own polymer materials by conducting room-temperature heterogeneous RDRP.

The heavy-atom effect on xanthene dyes for photopolymerization by visible light

Heavy halogen atoms on the xanthene ring significantly increase the photoredox catalytic performance for visible-light-induced photopolymerization.