Atomic-Scale Tuning of Graphene/Cubic SiC Schottky Junction for Stable Low-Bias Photoelectrochemical Solar-to-Fuel Conversion

Aging Ni(OH)2 on 3C-SiC Photoanodes to Achieve a High Photovoltage of 1.1 V and Enhanced Stability for Solar Water Splitting in Strongly Alkaline Solutions

Photoelectrochemical (PEC) water splitting is a promising approach to directly convert solar energy to renewable and storable hydrogen. However, the very low photovoltage and serious corrosion of semiconductor photoelectrodes in strongly acidic or alkaline electrolytes needed for water splitting severely impede the practical application of this technology. In this work, we demonstrate a facile approach to fabricate a high-photovoltage, stable photoanode by depositing Ni(OH)2 cocatalyst on cubic silicon carbide (3C-SiC), followed by aging in 1.0 M NaOH at room temperature for 40 h without applying electrochemical bias. The aged 3C-SiC/Ni(OH)2 photoanode achieves a record-high photovoltage of 1.10 V, an ultralow onset potential of 0.10 V vs the reversible hydrogen electrode, and enhanced stability for PEC water splitting in the strongly alkaline solution (pH = 13.6). This aged photoanode also exhibits excellent in-air stability, demonstrating identical PEC water-splitting performance for more than 400 days. We find that the aged Ni(OH)2 dramatically promotes the hole transport at the photoanode/electrolyte interface, thus significantly enhancing the photovoltage and overall PEC performance. Furthermore, the oxygen evolution reaction (OER) activity and the phase transitions of the Ni(OH)2 electrocatalyst before and after aging are systematically investigated. We find that the aging process is critical for the formation of the relatively stable and highly active Fe-doped β-NiOOH, which accounts for the enhanced OER activity and stability of the PEC water splitting. This work provides a simple and effective approach to fabricate high-photovoltage and stable photoanodes, bringing new premise toward solar fuel development.

Boosting Interfacial Electron Transfer and CO2 Enrichment on ZIF-8/ZnTe for Selective Photoelectrochemical Reduction of CO2 to CO

Artificial photosynthesis is an effective way of converting CO2 into fuel and high value-added chemicals. However, the sluggish interfacial electron transfer and adsorption of CO2 at the catalyst surface strongly hamper the activity and selectivity of CO2 reduction. Here, we report a photocathode attaching zeolitic imidazolate framework-8 (ZIF-8) onto a ZnTe surface to mimic an aquatic leaf featuring stoma and chlorophyll for efficient photoelectrochemical conversion of CO2 into CO. ZIF-8 possessing high CO2 adsorption capacity and diffusivity has been selected to enrich CO2 into nanocages and provide a large number of catalytic active sites. ZnTe with high light-absorption capacity serves as a light-absorbing layer. CO2 molecules are collected in large nanocages of ZIF-8 and delivered to the ZnTe surface. As evidenced by scanning electrochemical microscopy, the interface can effectively boost interfacial electron transfer kinetics. The ZIF-8/ZnTe photocathode with unsaturated Zn-Nx sites exhibits a high Faradaic efficiency for CO production of 92.9% and a large photocurrent of 6.67 mA·cm-2 at -2.48 V (vs Fc/Fc+) in a nonaqueous electrolyte at AM 1.5G solar irradiation (100 mW·cm-2).

Tailoring Cu-Based Electrocatalysts for Enhanced Electrochemical CO2 Reduction to Alcohols: Structure-Selectivity Relationship

The use of CO2 as a feedstock for the production of carbon-based fuels and value-added chemicals offers a promising route toward carbon neutrality. In this study, two Cu-based electrocatalysts, namely, Cu24/N-C and Cu2/N-C, are successfully prepared by thermal treatment of Cu24 metal-organic polyhedron-loaded zeolitic imidazolate framework-8 (ZIF-8) nanocrystals (Cu24/ZIF-8) and Cu2 dinuclear compound-loaded ZIF-8 nanocrystals (Cu2/ZIF-8), respectively. Extensive structural and compositional analyses were conducted to confirm the formation of Cu nanocluster-loaded N-doped porous carbon supports in both Cu24/N-C and Cu2/N-C and Cu nanoparticles encapsulated by graphitic carbons in Cu2/N-C as well. These two Cu-based electrocatalysts exhibited different behaviors in the electrochemical CO2 reduction reaction (CO2RR). The Cu24/N-C electrocatalyst showed high selectivity for CO production, while Cu2/N-C showed a preference for alcohol generation. The excellent stability of Cu2/N-C over a 30 h continuous electrochemical reduction further highlights its potential for practical applications. The difference in electrocatalytic performance observed in the two catalysts for CO2RR was attributed to distinct catalytic sites associated with Cu nanoclusters and nanoparticles. This research reveals the significance of their structures and compositions for the development of highly selective electrocatalysts for CO2 reduction.

Schottky Junction and D-A1 -A2 System Dual Regulation of Covalent Triazine Frameworks for Highly Efficient CO2 Photoreduction

Covalent triazine frameworks (CTFs) are emerging as a promising molecular platform for photocatalysis. Nevertheless, the construction of highly effective charge transfer pathways in CTFs for oriented delivery of photoexcited electrons to enhance photocatalytic performance remains highly challenging. Herein, a molecular engineering strategy is presented to achieve highly efficient charge separation and transport in both the lateral and vertical directions for solar-to-formate conversion. Specifically, a large π-delocalized and π-stacked Schottky junction (Ru-Th-CTF/RGO) that synergistically knits a rebuilt extended π-delocalized network of the D-A1 -A2 system (multiple donor or acceptor units, Ru-Th-CTF) with reduced graphene oxide (RGO) is developed. It is verified that the single-site Ru units in Ru-Th-CTF/RGO act as effective secondary electron acceptors in the lateral direction for multistage charge separation/transport. Simultaneously, the π-stacked and covalently bonded graphene is regarded as a hole extraction layer, accelerating the separation/transport of the photogenerated charges in the vertical direction over the Ru-Th-CTF/RGO Schottky junction with full use of photogenerated electrons for the reduction reaction. Thus, the obtained photocatalyst has an excellent CO2 -to-formate conversion rate (≈11050 µmol g-1 h-1 ) and selectivity (≈99%), producing a state-of-the-art catalyst for the heterogeneous conversion of CO2 to formate without an extra photosensitizer.

Mixed-Dimensional van der Waals Heterostructures for Boosting Electricity Generation

The emerging technology of harvesting environmental energy using hydrovoltaic devices enriches the conversion forms of renewable energy. It provides more concepts for power supply in micro/nano systems, and hydrovoltaic technology with high performance, usability, and integration is essential for achieving sustainable green energy. Comparing the discovery of multiscale nanomaterials, working layers with innovative microstructures have gradually become the dominant trend in the construction of graphene-based hydrovoltaic devices. However, reports on promoting ion/electron redistribution at the solid-liquid interface through the substrate effect of graphene are accompanied by tedious procedures, nondiverse substrates, and monolithic regulation of enhancement mechanisms. Here, the electrophoretic deposition (EPD)-driven SiC whiskers (SiCw)-assisted graphene transfer process is adopted to alleviate the complexity of the device fabrication caused by graphene transfer. The resulting output performance of the graphene/SiCw (GS) mesh films is significantly boosted. The high integrity of graphene and prominent negative surface charge near the graphene-droplet interface are derived from the overlayer and underlayer inside the graphene-based mixed-dimensional van der Waals (vdW) heterostructures, respectively. Additionally, a self-powered desalination-monitoring system is designed based on integrated hydrovoltaic devices. Electricity harvested from the ionic solutions is reused for deionization, representing an efficient strategy for energy conversion and utilization.

Electrochemical Li+ Insertion/Extraction Reactions at LiPON/Epitaxial Graphene Interfaces

Redox reactions of the Li+ insertion/extraction from one to two interlayers of graphene (Gr) on area-defined single-crystalline SiC substrates are investigated using lithium phosphorus oxynitride glass (LiPON) as the solid-state electrolyte. Unlike an organic liquid electrolyte, this glassy electrolyte does not induce a reduction current and excludes the desolvation reaction of Li+. Gr electrodes with less than two Gr layers show a single reduction peak and one or two oxidation peaks below +0.21 V (vs Li+/Li), differing distinctly from those of graphite and multilayer Gr, which display multiple peaks (multiple stage transitions). However, this finding aligns with the conventional understanding that graphite stage structure transitions proceed with stepwise increases or decreases in the number of Gr layers between adjacent Li-inserted interlayers. Cyclic voltammetry measurements indicate the presence of surface capacity due to Li+ adsorption/desorption at the LiPON/Gr interface. Moreover, Li+ insertion and extraction induce different charge transfer resistances at the level of a single interlayer. These sensitive measurements are achieved using high-quality epitaxial Gr and LiPON electrolyte, which prevent the formation of a solid electrolyte interphase and the desolvation reaction of Li+. Similar measurements using bilayer Gr produced by chemical vapor deposition coupled with a Gr transfer method and an ethylene carbonate/dimethyl carbonate liquid electrolyte are not reliable. Thus, the proposed method is effective for electrochemical measurement of Gr electrodes with a controlled number of layers.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

Self-enhanced photoelectrochemical sensor based on a Schottky heterostructure organic electron donor matrix

A self-enhanced photoelectrochemical copper ions sensor was constructed using an organic electron donor matrix with a Schottky heterostructure prepared from dopamine and single walled carbon nanohorns. The determination of Cu²⁺ with no additional electron donor solution, with high sensitivity and low background, provides new inspiration for the development of photoelectric sensing.

Porous Silicon Carbide (SiC): A Chance for Improving Catalysts or Just Another Active-Phase Carrier?

There is an obvious gap between efforts dedicated to the control of chemicophysical and morphological properties of catalyst active phases and the attention paid to the search of new materials to be employed as functional carriers in the upgrading of heterogeneous catalysts. Economic constraints and common habits in preparing heterogeneous catalysts have narrowed the selection of active-phase carriers to a handful of materials: oxide-based ceramics (e.g. Al₂O₃, SiO₂, TiO₂, and aluminosilicates-zeolites) and carbon. However, these carriers occasionally face chemicophysical constraints that limit their application in catalysis. For instance, oxides are easily corroded by acids or bases, and carbon is not resistant to oxidation. Therefore, these carriers cannot be recycled. Moreover, the poor thermal conductivity of metal oxide carriers often translates into permanent alterations of the catalyst active sites (i.e. metal active-phase sintering) that compromise the catalyst performance and its lifetime on run. Therefore, the development of new carriers for the design and synthesis of advanced functional catalytic materials and processes is an urgent priority for the heterogeneous catalysis of the future. Silicon carbide (SiC) is a non-oxide semiconductor with unique chemicophysical properties that make it highly attractive in several branches of catalysis. Accordingly, the past decade has witnessed a large increase of reports dedicated to the design of SiC-based catalysts, also in light of a steadily growing portfolio of porous SiC materials covering a wide range of well-controlled pore structure and surface properties. This review article provides a comprehensive overview on the synthesis and use of macro/mesoporous SiC materials in catalysis, stressing their unique features for the design of efficient, cost-effective, and easy to scale-up heterogeneous catalysts, outlining their success where other and more classical oxide-based supports failed. All applications of SiC in catalysis will be reviewed from the perspective of a given chemical reaction, highlighting all improvements rising from the use of SiC in terms of activity, selectivity, and process sustainability. We feel that the experienced viewpoint of SiC-based catalyst producers and end users (these authors) and their critical presentation of a comprehensive overview on the applications of SiC in catalysis will help the readership to create its own opinion on the central role of SiC for the future of heterogeneous catalysis.

Nanoporous Cubic Silicon Carbide Photoanodes for Enhanced Solar Water Splitting

Cubic silicon carbide (3C-SiC) is a promising photoelectrode material for solar water splitting due to its relatively small band gap (2.36 eV) and its ideal energy band positions that straddle the water redox potentials. However, despite various coupled oxygen-evolution-reaction (OER) cocatalysts, it commonly exhibits a much smaller photocurrent (<∼1 mA cm^-2) than the expected value (8 mA cm^-2) from its band gap under AM1.5G 100 mW cm^-2 illumination. Here, we show that a short carrier diffusion length with respect to the large light penetration depth in 3C-SiC significantly limits the charge separation, thus resulting in a small photocurrent. To overcome this drawback, this work demonstrates a facile anodization method to fabricate nanoporous 3C-SiC photoanodes coupled with Ni:FeOOH cocatalyst that evidently improve the solar water splitting performance. The optimized nanoporous 3C-SiC shows a high photocurrent density of 2.30 mA cm^-2 at 1.23 V versus reversible hydrogen electrode (V_RHE) under AM1.5G 100 mW cm^-2 illumination, which is 3.3 times higher than that of its planar counterpart (0.69 mA cm^-2 at 1.23 V_RHE). We further demonstrate that the optimized nanoporous photoanode exhibits an enhanced light-harvesting efficiency (LHE) of over 93%, a high charge-separation efficiency (Φ_sep) of 38%, and a high charge-injection efficiency (Φ_ox) of 91% for water oxidation at 1.23 V_RHE, which are significantly outperforming those its planar counterpart (LHE = 78%, Φ_sep = 28%, and Φ_ox = 53% at 1.23 V_RHE). All of these properties of nanoporous 3C-SiC enable a synergetic enhancement of solar water splitting performance. This work also brings insights into the design of other indirect band gap semiconductors for solar energy conversion.

Single-Atom-Based Heterojunction Coupling with Ion-Exchange Reaction for Sensitive Photoelectrochemical Immunoassay

Benefiting from the maximum atom-utilization efficiency and distinct structural features, single-atom catalysts open a new avenue for the design of more functional catalysts, whereas their bioapplications are still in their infancy. Due to the advantages, platinum single atoms supported by cadmium sulfide nanorods (Pt SAs-CdS) are synthesized to build an ultrasensitive photoelectrochemical (PEC) biosensing platform. With the decoration of Pt SAs, the PEC signal of CdS is significantly boosted. Furthermore, theory calculations indicate the positively charged Pt SAs could change the charge distribution and increase the excited carrier density of CdS. Meanwhile, it also suggests that Cu²⁺ can severely hinder the photoexcitation and electron-hole separation of CdS. As a proof of concept, prostate-specific antigen is chosen as the target analyte to demonstrate the superiority of the Pt SAs-CdS-based PEC sensing system. As a result, the PEC biosensor based on Pt SAs-CdS exhibits outstanding detection sensitivity and promising applicability.

Highly Selective Photocatalytic CO2 Reduction to CH4 by Ball-Milled Cubic Silicon Carbide Nanoparticles under Visible-Light Irradiation

The ultimate goal of photocatalytic CO2 reduction is to achieve high selectivity for a single product with high efficiency. One of the most significant challenges is that expensive catalysts prepared through complex processes are usually used. Herein, gram-scale cubic silicon carbide (3C-SiC) nanoparticles are prepared through a top-down ball-milling approach from low-priced 3C-SiC powders. This facile mechanical milling strategy ensures large-scale production of 3C-SiC nanoparticles with an amorphous silicon oxide (SiOx) shell and simultaneously induces abundant surface states. The surface states are demonstrated to trap the photogenerated carriers, thus remarkably enhancing the charge separation, while the thin SiOx shell prevents 3C-SiC from corrosion under visible light. The unique electronic structure of 3C-SiC tackles the challenge associated with low selectivity of photocatalytic CO2 reduction to C1 compounds. In conjugation with efficient water oxidation, 3C-SiC nanoparticles can reduce CO2 into CH4 with selectivity over 90%.