Three-Dimensional Molybdenum Diselenide Helical Nanorod Arrays for High-Performance Aluminum-Ion Batteries

ZCNC Beaded Heterostructure toward High-Performance Aluminum Batteries

We designed and prepared the ZnSe/CoSe2@NC/CNTs (ZCNC) cathode material for aluminum batteries (ABs). The ZCN (ZnSe/CoSe2@NC) is connected by the interwoven carbon nanotube (CNT) conductive network to form a beaded structure. CNTs and the carbon formed by carbonization of organic ligands is beneficial to improving the electrical conductivity of the material and reducing structural damage during cycling. The internal electric field generated at the interface of heterostructures can promote the transfer of electrons/ions. This special structure promotes ZCNC excellent electrochemical properties. At 100 mA/g, the specific capacity of the first discharge reaches 338 mAh/g, while the specific capacity after 500 cycles still reaches 217 mAh/g. Compared with ZCN and CN(CoSe2@NC), it demonstrates a great advantage.

Intermolecular Hydrogen Bonding Networks Stabilized Organic Supramolecular Cathode for Ultra-High Capacity and Ultra-Long Cycle Life Rechargeable Aluminum Batteries

Rechargeable aluminum batteries (RABs) are a promising candidate for large-scale energy storage, attributing to the abundant reserves, low cost, intrinsic safety, and high theoretical capacity of Al. However, the cathode materials reported thus far still face challenges such as limited capacity, sluggish kinetics, and undesirable cycle life. Herein, we propose an organic cathode benzo[i] benzo[6,7] quinoxalino [2,3-a] benzo [6,7] quinoxalino [2,3-c] phenazine-5,8,13,16,21,24-hexaone (BQQPH) for RABs. The six C=O and six C=N redox active sites in each molecule enable BQQPH to deliver a record ultra-high capacity of 413 mAh g-1 at 0.2 A g-1. Encouragingly, the intermolecular hydrogen bonding network and π-π stacking interactions endow BQQPH with robust structural stability and minimal solubility, enabling an ultra-long lifetime of 100,000 cycles. Moreover, the electron-withdrawing carbonyl group induces a reduction in the energy level of the lowest unoccupied molecular orbital and expands the π-conjugated system, which considerably enhances both the discharge voltage and redox kinetics of BQQPH. In situ and ex situ characterizations combined with theoretical calculations unveil that the charge storage mechanism is reversible coordination/dissociation of AlCl2 + with the N and O sites in BQQPH accompanied by 12-electron transfer. This work provides valuable insights into the design of high-performance organic cathode materials for RABs.

Transition metal dichalcogenide-based materials for rechargeable aluminum-ion batteries: A mini-review

Rechargeable aluminum-ion batteries (AIBs) have emerged as a promising candidate for energy storage applications and have been extensively investigated over the past few years. Due to their high theoretical capacity, nature of abundance, and high safety, AIBs can be considered an alternative to lithium-ion batteries. However, the electrochemical performance of AIBs for large-scale applications is still limited due to the poor selection of cathode materials. Transition metal dichalcogenides (TMDs) have been regarded as appropriate cathode materials for AIBs due to their wide layer spacing, large surface area, and distinct physiochemical characteristics. This mini-review provides a succinct summary of recent research progress on TMD-based cathode materials in non-aqueous AIBs. The latest developments in the benefits of utilizing 3D-printed electrodes for AIBs are also explored.

Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid-State Electrolytes

Solid-state batteries (SSBs) have received significant attention due to their high energy density, reversible cycle life, and safe operations relative to commercial Li-ion batteries using flammable liquid electrolytes. This review presents the fundamentals, structures, thermodynamics, chemistries, and electrochemical kinetics of desirable solid electrolyte interphase (SEI) required to meet the practical requirements of reversible anodes. Theoretical and experimental insights for metal nucleation, deposition, and stripping for the reversible cycling of metal anodes are provided. Ion transport mechanisms and state-of-the-art solid-state electrolytes (SEs) are discussed for realizing high-performance cells. The interface challenges and strategies are also concerned with the integration of SEs, anodes, and cathodes for large-scale SSBs in terms of physical/chemical contacts, space-charge layer, interdiffusion, lattice-mismatch, dendritic growth, chemical reactivity of SEI, current collectors, and thermal instability. The recent innovations for anode interface chemistries developed by SEs are highlighted with monovalent (lithium (Li+ ), sodium (Na+ ), potassium (K+ )) and multivalent (magnesium (Mg2+ ), zinc (Zn2+ ), aluminum (Al3+ ), calcium (Ca2+ )) cation carriers (i.e., lithium-metal, lithium-sulfur, sodium-metal, potassium-ion, magnesium-ion, zinc-metal, aluminum-ion, and calcium-ion batteries) compared to those of liquid counterparts.

Interaction Mechanism between Cyano-Organic Molecular Structures and Energy Storage of Aluminum Complex Ions in Aluminum Batteries

Aluminum ion batteries (AIBs) are widely regarded as the most potential large-scale metal ion battery because of its high safety and environment-friendly characteristics. To solve the problem of weak electrical conductivity of organic materials, different structures of cyano organic molecules with electrophilic properties are selected as the cathode materials of aluminum batteries. Through experimental characterization and density functional theory theoretical calculation, Phthalonitrile is the best cathode material among the five organic molecules and proved that the C≡N group is the active site for insertion/extraction of AlCl2 + ions. The first cycle-specific capacity of the assembled flexible package battery is as high as 191.92 mAh g-1 , the discharge-specific capacity is 112.67 mAh g-1 after 1000 cycles, and the coulombic efficiency is ≈97%. At the same time, the influences of different molecular structures and functional groups on the battery are also proved. These research results lay a foundation for selecting safe and stable organic aluminum batteries and provide a new reference for developing high-performance AIBs.

Tremella-like Vanadium Tetrasulfide as a High-Performance Cathode Material for Rechargeable Aluminum Batteries

Rechargeable aluminum batteries (RABs) are gaining widespread attention for large-scale energy storage applications as a result of their high energy densities, high security, and abundance. The key to sustain the progress of RABs lies in the quest for the proper cathode materials with prominent capacity and reversible cycle life. Herein, we propose a tremella-like VS₄ as a cathode material aiming to tackle this problem. Obtained from a morphology modification process, VS₄ with a unique nanosheet structure provides sufficient active sites for intercalation and conversion reactions, shortens the transport paths for charge carrier ions, and facilitates the infiltration process for electrolyte. The RAB with the VS₄ cathode exhibits excellent electrochemical performance, including outstanding specific capacity (407.9 mAh g^-1) and stable cycling performance (∼300 cycles at a high current density). The energy storage mechanism has been comprehensively investigated and is confirmed to be a combination of the intercalation/deintercalation of Al³⁺ and AlCl₄^- ions and conversion reaction by various techniques and DFT calculation. Our study not only provides a peculiar and simple strategy for the rational design of metal sulfide cathode materials with high capacity and long-term stability but also proposes a specific energy storage mechanism that guides the development of cathode materials of RABs in the future.

Rational Design on Polymorphous Phase Switching in Molybdenum Diselenide-Based Memristor Assisted by All-Solid-State Reversible Intercalation toward Neuromorphic Application

In this work, a low-power memristor based on vertically stacked two-dimensional (2D) layered materials, achieved by plasma-assisted vapor reaction, as the switching material, with which the copper and gold metals as electrodes featured by reversible polymorphous phase changes from a conducting 1T-phase to a semiconducting 2H-one once copper cations interacted between vertical lamellar layers and vice versa, was demonstrated. Here, molybdenum diselenide was chosen as the switching material, and the reversible polymorphous phase changes activated by the intercalation of Cu cations were confirmed by pseudo-operando Raman scattering, transmission electron microscopy, and scanning photoelectron microscopy under high and low resistance states, respectively. The switching can be activated at about ±1 V with critical currents less than 10 μA with an on/off ratio approaching 100 after 100 cycles and low power consumption of ∼0.1 microwatt as well as linear weight updates controlled by the amount of intercalation. The work provides alternative feasibility of reversible and all-solid-state metal interactions, which benefits monolithic integrations of 2D materials into operative electronic circuits.

High Performance and Long-cycle Life Rechargeable Aluminum Ion Battery: Recent Progress, Perspectives and Challenges

The rising energy crisis and environmental concerns caused by fossil fuels have accelerated the deployment of renewable and sustainable energy sources and storage systems. As a result of immense progress in the field, cost-effective, high-performance, and long-life rechargeable batteries are imperative to meet the current and future demands for sustainable energy sources. Currently, lithium-ion batteries are widely used, but limited lithium (Li) resources have caused price spikes, threatening progress toward cleaner energy sources. Therefore, post-Li, batteries that utilize highly abundant materials leading to cost-effective energy storage solutions while offering desirable performance characteristics are urgently needed. Aluminum-ion battery (AIB) is an attractive concept that uses highly abundant aluminum while offering a high theoretical gravimetric and volumetric capacity of 2980 mAh g^-1 and 8046 mAh cm^-3 , respectively. As a result, intensified efforts have been made in recent years to utilize numerous electrolytes, anodes, and cathode materials to improve the electrochemical performance of AIBs, and potentially create high-performance, low-cost, and safe energy storage devices. Herein, recent progress in the electrolyte, anode, and cathode active materials and their utilization in AIBs and their related characteristics are summarized. Finally, the main challenges facing AIBs along with future directions are highlighted.

Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries

Manipulating the reversible redox chemistry of transition metal dichalcogenides for energy storage often faces great challenges as it is difficult to regulate the discharged products directly. Herein we report that tensile-strained MoSe₂ (TS-MoSe₂) can act as a host to transfer its strain to corresponding discharged product Mo, thus contributing to the regulation of Gibbs free energy change (ΔG) and enabling a reversible sodium storage mechanism. The inherited strain results in lattice distortion of Mo, which adjusts the d-band center upshifted closer to the Fermi level to enhance the adsorbability of Na₂Se, thereby leading to a decreased ΔG of the redox chemistry between Mo/Na₂Se and MoSe₂. Ex situ and in situ experiments revealed that, unlike the unstrained MoSe₂, TS-MoSe₂ shows a highly reversible sodium storage, along with an evidently improved reaction kinetics. This work sheds light on the study on electrochemical energy storage mechanism of other electrode materials.

Manipulating the redox chemistry of transition metal dichalcogenides still faces challenges. Here the authors report that tensile-strained MoSe2 can pass on the strain to its sodiated product Mo, and thus regulate the Gibbs free energy in the charging process to enable the reversible sodium storage.

Design Strategies of High-Performance Positive Materials for Nonaqueous Rechargeable Aluminum Batteries: From Crystal Control to Battery Configuration

Rechargeable aluminum batteries (RABs) have been paid considerable attention in the field of electrochemical energy storage batteries due to their advantages of low cost, good safety, high capacity, long cycle life, and good wide-temperature performance. Unlike traditional single-ion rocking chair batteries, more than two kinds of active ions are electrochemically participated in the reaction processes on the positive and negative electrodes for nonaqueous RABs, so the reaction kinetics and battery electrochemistries need to be given more comprehensive assessments. In addition, although nonaqueous RABs have made significant breakthroughs in recent years, they are still facing great challenges in insufficient reaction kinetics, low energy density, and serious capacity attenuation. Here, the research progresses of positive materials are comprehensively summarized, including carbonaceous materials, oxides, elemental S/Se/Te and chalcogenides, as well as organic materials. Later, different modification strategies are discussed to improve the reaction kinetics and battery performance, including crystal structure control, morphology and architecture regulation, as well as flexible design. Finally, in view of the current research challenges faced by nonaqueous RABs, the future development trend is proposed. More importantly, it is expected to gain key insights into the development of high-performance positive materials for nonaqueous RABs to meet practical energy storage requirements.

Co-Construction of Solid Solution Phase and Void Space in Yolk-Shell Fe0.4Co0.6S@N-Doped Carbon to Enhance Cycling Capacity and Rate Capability for Aluminum-Ion Batteries

Rechargeable aluminum-ion batteries (AIBs), using low-cost and inherent safety Al metal anodes, are regarded as promising energy storage devices next to lithium-ion batteries. Currently, one of the greatest challenges for AIBs is to explore cathodes suitable for feasible Al³⁺ insertion/extraction with high structure stability. Herein, a facile co-engineering on solid solution phase and cavity structure is developed via Prussian blue analogues by a simple and facile sulfidation strategy. The obtained uniform yolk-shell Fe_0.4Co_0.6S@N-doped carbon nanocages (y-s Fe_0.4Co_0.6S@NC) display a high reversible capacity of 141.3 mA h g^-1 at 500 mA g^-1 after 100 cycles and a good rate capability of 100.9 mA h g^-1 at 1000 mA g^-1. The improved performance can be mainly ascribed to the dual merits of the composite; that is, more negative Al³⁺ formation energy and improved Al³⁺ diffusion kinetics favored by the solid solution phase and Al³⁺ insertion/extraction accommodable space stemmed from the yolk-shell structure. Moreover, the reaction mechanism study discloses that the reaction involves the intercalation of Al³⁺ ions into Fe_0.4Co_0.6S to generate Al_lFe_mCo_nS and elemental Fe and Co.

Long life of exceeding 10000 cycles for aluminum-ion batteries based on FeTe2@GO composite as cathode

Iron telluride wrapped with graphene oxide (GO) nanocomposite via a hydrothermal method is introduced as the cathode material for aluminum-ion batteries (AIBs), exhibiting best cyclability ( 120.4 mA h g-1...

Molybdenum carbide anchored on glucose-derived carbon (β-Mo2C@C) as a bifunctional catalyst for conversion of fructose to 2,5-diformylfuran

Molybdenum carbide anchored on glucose-derived carbon (β-Mo2C@C) has been successfully synthesized and applied as a bifunctional catalyst for one-pot conversion of fructose to DFF.

Polycyclic Aromatic Hydrocarbons as a New Class of Promising Cathode Materials for Aluminum-Ion Batteries

As an emerging post-lithium battery technology, aluminum ion batteries (AIBs) have the advantages of large Al reserves and high safety, and have great potential to be applied to power grid energy storage. But current graphite cathode materials are limited in charge storage capacity due to the formation of stage-4 graphite-intercalated compounds (GICs) in the fully charged state. Herein, we propose a new type of cathode materials for AIBs, namely polycyclic aromatic hydrocarbons (PAHs), which resemble graphite in terms of the large conjugated π bond, but do not form GICs in the charge process. Quantum chemistry calculations show that PAHs can bind AlCl₄ ^- through the interaction between the conjugated π bond in the PAHs and AlCl₄ ^- _, forming on-plane interactions. The theoretical specific capacity of PAHs is negatively correlated with the number of benzene rings in the PAHs. Then, under the guidance of theoretical calculations, anthracene, a three-ring PAH, was evaluated as a cathode material for AIBs. Electrochemical measurements show that anthracene has a high specific capacity of 157 mAh g^-1 (at 100 mA g^-1 ) and still maintains a specific capacity of 130 mAh g^-1 after 800 cycles. This work provides a feasible "theory guides practice" research model for the development of energy storage materials, and also provides a new class of promising cathode materials for AIBs.

Al-Storage Behaviors of Expanded Graphite as High-Rate and Long-Life Cathode Materials for Rechargeable Aluminum Batteries

The rational design and synthesis of capable cathode materials with low cost that can exhibit good electrochemical performance are key to the development of rechargeable aluminum batteries (RABs). In this article, we have developed low-cost expanded graphite as typical cathode materials for high-performance RABs in pouch cells. Remarkably, the commercial expanded graphite can show high-rate performance, long-term cyclic life, and high energy density (64 Wh kg^-1 based on a whole pouch cell). In particular, it delivers a high capacity of 111 mAh g^-1 at a current density of 2 A g^-1 after 300 cycles and 61.1 mAh g^-1 at a high current density of 50 A g^-1 after 10 000 cycles. The high-rate performance is derived from the rapid kinetic enhancement caused by the chemisorption-involved-intercalation pseudocapacitance effect. Further, a series of facile electrochemical means are used to confirm the intercalation (1.5-2.4 V)-adsorption mechanism (0.5-1.5 V) of expanded graphite. This work can provide significant support for further understanding the Al-storage behaviors of graphite materials in RABs.

Ammonium Intercalation Induced Expanded 1T-Rich Molybdenum Diselenides for Improved Lithium Ion Storage

Transition metal dichalcogenides (TMDs), particularly molybdenum diselenides (MoSe₂), have the merits of their unique two-dimensional (2D) layered structures, large interlayer spacing (∼0.64 nm), good electrical conductivities, and high theoretical capacities when applied in lithium-ion batteries (LIBs) as anode materials. However, MoSe₂ remains suffering from inferior stability as well as unsatisfactory rate capability because of the unavoidable volume expansion and sluggish charge transport during lithiation-delithiation cycles. Herein, we develop a simultaneous reduction-intercalation strategy to synthesize expanded MoSe₂ (e-MoSe₂) with an interlayer spacing of 0.98 nm and a rich 1T phase (53.7%) by rationally selecting the safe precursors of ethylenediamine (NH₂C₂H₄NH₂), selenium dioxide (SeO₂), and sodium molybdate (Na₂MoO₄). It is noteworthy that NH₂C₂H₄NH₂ can effectively reduce SeO₂ and MoO₄^2- forming MoSe₂ nanosheets; in the meantime, the generated ammonium (NH₄⁺) efficiently intercalates between MoSe₂ layers, leading to charge transfer, thus stabilizing 1T phases. The obtained e-MoSe₂ exhibits high capacities of 778.99 and 611.40 mAh g^-1 at 0.2 and 1 C, respectively, together with excellent cycling stability (retaining >90% initial capacity at 0.2 C over 100 charge-discharge cycles). It is believed that the material design strategy proposed in this paper provides a favorable reference for the synthesis of other transition metal selenides with improved electrochemical performance for battery applications.

Wrapping Plasmonic Silver Nanoparticles inside One-Dimensional Nanoscrolls of Transition-Metal Dichalcogenides for Enhanced Photoresponse

The low light absorption of transition-metal dichalcogenide (TMDC) nanosheets hinders their application as high-performance optoelectronic devices. Rolling them up into one-dimensional (1D) nanoscrolls and decorating them with plasmonic nanoparticles (NPs) are both effective strategies for enhancing their performance. When these two approaches are combined, in this work, the light-matter interaction in TMDC nanosheets is greatly improved by encapsulating silver nanoparticles (Ag NPs) in TMDC nanoscrolls. After the silver nitrate (AgNO₃) solution was spin-coated on monolayer (1L) MoS₂ and WS₂ nanosheets grown by chemical vapor deposition, Ag NPs were homogeneously formed to obtain MoS₂-Ag and WS₂-Ag nanosheets due to the TMDC-assisted spontaneous reduction, and their size and density can be well controlled by tuning the concentration of the AgNO₃ solution. By the simple placement of alkaline droplets on MoS₂-Ag or WS₂-Ag hybrid nanosheets, MoS₂-Ag or WS₂-Ag nanoscrolls with large sizes were obtained in large area. The obtained hybrid nanoscrolls exhibited up to 500 times increased photosensitivities compared with 1L MoS₂ nanosheets, arising from the localized surface plasmon resonance effect of Ag NPs and the scrolled-nanosheet structure. Our work provides a reliable method for the facile and large-area preparation of NP/nanosheet hybrid nanoscrolls and demonstrates their great potential for high-performance optoelectronic devices.

Nonaqueous Rechargeable Aluminum Batteries: Progresses, Challenges, and Perspectives

For significantly increasing the energy densities to satisfy the growing demands, new battery materials and electrochemical chemistry beyond conventional rocking-chair based Li-ion batteries should be developed urgently. Rechargeable aluminum batteries (RABs) with the features of low cost, high safety, easy fabrication, environmental friendliness, and long cycling life have gained increasing attention. Although there are pronounced advantages of utilizing earth-abundant Al metals as negative electrodes for high energy density, such RAB technologies are still in the preliminary stage and considerable efforts will be made to further promote the fundamental and practical issues. For providing a full scope in this review, we summarize the development history of Al batteries and analyze the thermodynamics and electrode kinetics of nonaqueous RABs. The progresses on the cutting-edge of the nonaqueous RABs as well as the advanced characterizations and simulation technologies for understanding the mechanism are discussed. Furthermore, major challenges of the critical battery components and the corresponding feasible strategies toward addressing these issues are proposed, aiming to guide for promoting electrochemical performance (high voltage, high capacity, large rate capability, and long cycling life) and safety of RABs. Finally, the perspectives for the possible future efforts in this field are analyzed to thrust the progresses of the state-of-the-art RABs, with expectation of bridging the gap between laboratory exploration and practical applications.

Advanced High-Performance Potassium-Chalcogen (S, Se, Te) Batteries

Current great progress on potassium-chalcogen (S, Se, Te) batteries within much potential to become promising energy storage systems opens a new avenue for the rapid development of potassium batteries as a complementary option to lithium ion batteries. The discussion mainly concentrates on recent research advances of potassium-chalcogen (S, Se, Te) batteries and their corresponding cathode materials in this review. Initially, the development of cathode materials for four types of batteries is introduced, including: potassium-sulfur (K-S), potassium-selenium (K-Se), potassium-selenium sulfide (K-Se_x S_y ), and potassium-tellurium (K-Te) batteries. Next, critical challenges for chalcogen-based electrodes in devices operation are summarized. In addition, some pragmatic strategies are proposed as well to relieve the low electronic conductivity, large volumetric expansion, shuttle effect, and potassium dendrite growth. At last, the perspectives on designing advanced cathode materials for potassium-chalcogen batteries are provided with the goal of developing high-performance potassium storage devices.