Highly Stable Perovskite Quantum Dots Modified by Europium Complex for Dual-Responsive Optical Encoding

Self-healing photoluminescent polymers with photosensitive behavior for information storage and multiple-level dynamic encryption

Photo-responsive luminescent materials capable of responding to light stimuli are crucial in the realm of sophisticated encryption, anti-counterfeiting, and optical data storage. Yet, the development of such materials that also feature self-healing capabilities, swift reaction times, light weight, fatigue resistance, dynamic display abilities, and enhanced security measures is exceedingly rare and presents considerable challenges. Herein, a novel family of self-healing and photo-stimuli-responsive photoluminescent polymers are reported, which is achieved by interlinking terpyridine- and spiropyran-functionalized polymers through N-Ln coordination bonds and hydrogen bonding among the polymer chains. The resulting polymers exhibit good processability, superior tensile strength, fast self-healing ability, and photo-stimuli-responsive performance. The photo-stimuli-responsive properties include unique color shifts (colorless and purple) and light-controlled time-dependent fluorescence modulation (green-, red-, and yellow-emission), which stem from fine-tuning the isomerization of spiropyran and leveraging the fluorescence resonance energy transfer (FRET) from Ln-Tpy donors to spiropyran acceptors, respectively. Besides, these polymers have been successfully applied in dynamic multi-level information encryption applications. We are convinced that these smart materials, crafted through our innovative approach, hold vast potential for applications in information storage, cutting-edge anti-counterfeiting encryption, UV-sensing, and light-writing technologies, marking a novel strategy in the design of photosensitive luminescent smart materials.

Concealed fluorescent anti-counterfeiting paper prepared by loading perovskite and lead-metal-organic framework on cellulose fibers

Counterfeiting has caused great concern all over the world. What's more, the fluorescent materials play an important role in technological research and development for high-security. In this work, lead-metal-organic framework (Pb-MOF) and perovskite (MAPbBr3) were used in papers to achieving fluorescence counterfeiting. Pb-MOF, as the template or precursor of MAPbBr3, were in-situ generated on the surface of cellulose fibers (CFs) to preparing into hand sheets (Pb-MOF@CFs). Through the analysis of experimental results, it was found that ligands, reaction systems, addition sequences of drugs, time, etc. would affect the deposition of Pb-MOF on the surface of CFs. Using CH3NH3Br (MABr) as the anti-counterfeiting ink to write on Pb-MOF@CFs, the orange writing leaped across the paper, which caused by Pb in Pb-MOF chemically reacting with MABr forming MAPbBr3. The orange writing displayed green fluorescence under 365 nm ultraviolet lamp excitation. The orange writing with green fluorescence could be extinguished and reconstructed, which had promise for reuse. In addition, fluorescent security papers (MAPbBr3@Pb-MOFs@CFs) were prepared by immersing Pb-MOF@CFs in MABr solution. The fluorescence of MAPbBr3@Pb-MOFs@CFs opened when the surface of it was scraped under 365 nm ultraviolet lamp. This unique fluorescence property was very important in improving the security of products. Consequently, the ongoing research on perovskite and MOFs materials is of great significance.

Multilevel Information Encryption Based on Thermochromic Perovskite Microcapsules via Orthogonal Photic and Thermal Stimuli Responses

Increasing modal variations of stimulus-responsive materials ensure the high capacity and confidentiality of information storage and encryption systems that are crucial to information security. Herein, thermochromic perovskite microcapsules (TPMs) with dual-variable and quadruple-modal reversible properties are designed and prepared on the original oil-in-fluorine (O/F) emulsion system. The TPMs respond to the orthogonal variations of external UV and thermal stimuli in four reversible switchable modes and exhibit excellent thermal, air, and water stability due to the protection of perovskites by the core-shell structure. Benefiting from the high-density information storage TPMs, multiple information encryptions and decryptions are demonstrated. Moreover, a set of devices are assembled for a multilevel information encryption system. By taking advantage of TPMs as a "private key" for decryption, the signal can be identified as the corresponding binary ASCII code and converted to the real message. The results demonstrate a breakthrough in high-density information storage materials as well as a multilevel information encryption system based on switchable quadruple-modal TPMs.

Ratiometric fluorescence sensor based on europium-organic frameworks for selective and quantitative detection of cerium ions

BACKGROUND

Due to the unavoidable use of cerium in daily life, the accumulation of cerium in the environment increases health risks for humans. Therefore, it is crucial to develop a chemical sensing technology for the rapid, sensitive, and selective detection of cerium ions.

RESULTS

In this research work, a novel two-dimensional chain structure of a europium-based metal organic framework (Eu-MOF) [Eu2(tcpa)(Htcpa)2] was synthesized by using 3,4,5,6-tetrachloro-1,2-benzenedicarboxylic acid (H2TCPA) as the ligand and europium nitrate as the metal source. The results of powder X-ray diffraction and thermogravimetric analysis show that the synthesized Eu-MOF has excellent chemical and thermal stability. When the Eu-MOF suspension was excited by ultraviolet light at 292 nm, four fluorescence emissions were observed at 420, 595, 620 and 705 nm. It was particularly interesting that when cerium ions (Ce3+/Ce4+) were added to the Eu-MOF suspension, the fluorescence intensity at 420 nm was enhanced, while the fluorescence at 620 nm was quenched. On this basis, a ratiometric fluorescent sensor for detecting cerium ions was constructed, which has a good linear relationship in the range of 0.05-15 μM and a detection limit of 16 nM. The plausible mechanism of the change in the fluorescence characteristics of Eu-MOF caused by cerium ions was discussed in detail. Through the study of fluorescence lifetime and ultraviolet absorption, it was proven that the mechanism of Ce3+-quenching Eu-MOF fluorescence is the inner filter effect. Photoinduced electron transfer and internal filtering effects lead to fluorescence quenching at 620 nm, while redox reactions lead to fluorescence enhancement of the ligand at 420 nm.

SIGNIFICANCE

The proposed ratiometric fluorescence sensor was successfully employed for the detection of cerium ions in real water samples, confirming that it can be used as an alternative method for the detection of Ce3+ and Ce4+ in environmental samples.

Metal-Ion-Doped Manganese Halide Hybrids with Tunable Emission for Advanced Anti-Counterfeiting

Stimuli-responsive luminescent materials have received great attention for their potential application in anti-counterfeiting and information encryption. Manganese halide hybrids have been considered an efficient stimuli-responsive luminescent material due to their low price and adjustable photoluminescence (PL). However, the photoluminescence quantum yield (PLQY) of PEA₂MnBr₄ is relatively low. Herein, Zn²⁺- and Pb²⁺-doped PEA₂MnBr₄ samples are synthesized, and show an intense green emission and orange emission, respectively. After doping with Zn²⁺, the PLQY of PEA₂MnBr₄ is elevated from 9% to 40%. We have found that green emitting Zn²⁺-doped PEA₂MnBr₄ could transform to a pink color after being exposed to air for several seconds and the reversible transformation from pink to green was achieved by using heating treatment. Benefiting from this property, an anti-counterfeiting label is fabricated, which exhibits excellent "pink-green-pink" cycle capability. Pb²⁺-doped PEA₂Mn_0.88Zn_0.12Br₄ is acquired by cation exchange reaction, which shows intense orange emission with a high QY of 85%. The PL of Pb²⁺-doped PEA₂Mn_0.88Zn_0.12Br₄ decreases with increasing temperature. Hence, the encrypted multilayer composite film is fabricated relying on the different thermal responses of Zn²⁺- and Pb²⁺-doped PEA₂MnBr₄, whereby the encrypted information can be read out by thermal treatment.

Electrospinning Preparation, Structure, and Properties of Fe3O4/Tb(acac)3phen/Polystyrene Bifunctional Microfibers

Compared to single functional materials, multifunctional materials with magnetism and luminescence are more attractive and promising; Thus, it has become an important subject. In our work, bifunctional Fe₃O₄/Tb(acac)₃phen/polystyrene) microfibers with magnetic and luminescent properties (acac: acetylacetone, phen: 1,10-phenanthroline) were synthesized by simple electrospinning process. The doping of Fe₃O₄ and Tb(acac)₃phen made the fiber diameter larger. The surface of pure polystyrene microfibers and microfibers doped only with Fe₃O₄ nanoparticles were chapped similar to bark, whereas the surface of the microfibers was smoother after doping with Tb(acac)₃phen complexes. The luminescent properties of the composite microfibers were systematically studied in contrast to pure Tb(acac)₃phen complexes, including excitation and emission spectra, fluorescence dynamics, and the temperature dependence of intensity. Compared with the pure complexes, the thermal activation energy and thermal stability of composite microfiber was significantly improved, and the luminescence of the unit mass of Tb(acac)₃phen complexes in composite microfibers was stronger than that in pure Tb(acac)₃phen complexes. The magnetic properties of the composite microfibers were also investigated using hysteresis loops, and an interesting experimental phenomenon was found that the saturation magnetization of the composite microfibers gradually increased with the increase in the doping proportion of terbium complexes.

Concentration-dependent dielectric and electro-optical properties of composites based on nematic liquid crystals and CdS:Mn quantum dots

Composites in a wide concentration range of 0-0.6 wt% based on a nematic liquid crystal mixture and CdS quantum dots doped with manganese ions (Mn 6%) are presented. The effect of the CdS:Mn quantum dots on the phase diagram and electronic structure of composites was studied using differential scanning calorimetry and fluorescence analysis. Nonmonotonic concentration-dependent changes in the clearing point, which correlate with the fluorescence quenching behavior of the main CdS:Mn peak, were found. Dielectric spectroscopy and electro-optic studies revealed a corresponding increase in the dielectric permittivity anisotropy and birefringence in the 0.2-0.4 wt% range, where thermodynamic changes occur. The initiating factors behind this effect are supposed to be the self-assembly of quantum dots, and the distortion of the orientation order of liquid crystal molecules at a higher mass concentration of quantum dots.

Study of Judd-Ofelt, Urbach energy and photosensitization process in luminescent Sm(III) complexes with heterocyclic ligands

Six samarium (III) complexes were synthesised by employing the β-ketocarboxylic acid as main ligand and five N-donor systems as ancillary ligands through the environmentally safe liquid-assisted grinding method. Various characterisation techniques were employed to determine the structure of the complexes i.e. NMR, IR, XRD and SEM. Photoluminescent studies were carried out in solid as well as in solution form. In solid and solution form emission spectra show maximum intensity peak at 604 and 602 nm, respectively, assigned to ⁴G_5/2 → ⁶H_7/2 transition which explains orange emission on UV excitation in complexes. CCT, CP, colorimetric parameters and quantum yield (relative and intrinsic) of the synthesized complexes were calculated. With the help of reflectance spectra, band gap and Urbach energy were determined. Lasing parameters were also calculated by employing FWHM values obtained from Gaussian fitting. Energy transfer study revealed the efficacious energy transfer from ligand to metal's emissive level. Further antimicrobial studies revealed higher activity in case of complexes in comparison to ligand.

Competitive Dual-Emission-Induced Thermochromic Luminescence in Organic-Metal Halides

Lead-free Halides, especially Mn-based ones, are preferred as hotspots in the exploration of photoluminescent materials. However, there are few reports on sensitive reversible thermochromism and switchable dual emission originating from self-trapped exciton emission in pure Mn-Based materials. Here, we report a new Mn-based hybrid material [TMPA]₂MnI₄ (TMPA = trimethylphenylammonium), which shows two emission peaks at 545 and 660 nm benefitting from the d-d orbital transition of Mn²⁺ and the generation of self-trapped excitons, respectively. Due to the different sensitivity to temperature, the stages of thermal activation and thermal quenching of the two emission types are also inconsistent, showing a certain competition relationship and dominating the emission colors in different temperature ranges, resulting in adjustable green-orange-green thermochromic luminescence from 100 to 403 K (both high and low temperatures correspond to green, and orange is displayed at near room temperature). Therefore, thermochromic luminescence can be easily achieved by controlling the temperature under the guidance of excited states. This work provides new insights into the synthesis and application of thermochromic materials. Therefore, it is certain that regulating temperature while being guided by excited states will achieve thermochromic luminescence. This research offers fresh perspectives on the development and potential of thermochromic materials.

Systematic Study on the Luminescent Properties, Thermal Stability, and Magnetic Behavior of GdOF: RE3+ (RE = Eu, Yb, and Er) Red Phosphors with Various Morphologies

In this work, GdOF:RE³⁺ (RE = Eu, Yb, and Er) phosphors with high thermally stable luminescence were reported, which were synthesized by an ionic liquid-assisted two-phase system and subsequent calcination technique for the first time. Nanodisks, nanorod aggregates, nanoneedles, and stubby nanorods were obtained by simply regulating the pH value. The luminescent properties of precursors and products were discussed in detail. By carefully adjusting the calcination temperature and the pH value of the initial system, pure red emission was achieved in both GdOF:Eu³⁺ and GdOF:Yb³⁺, Er³⁺ phosphors. The reason for distinct luminescent properties of different products was discussed from various perspectives. Moreover, the temperature-dependent spectra were measured and the GdOF:Eu³⁺ and GdOF:Yb³⁺, Er³⁺ products both exhibited outstanding thermal stability. In addition, the as-prepared nanomaterials presented paramagnetic properties, indicating their potential application in both field-emission displays and magnetic resonance imaging technology.

Review for Rare-Earth-Modified Perovskite Materials and Optoelectronic Applications

In recent years, rare-earth metals with triply oxidized state, lanthanide ions (Ln³⁺), have been demonstrated as dopants, which can efficiently improve the optical and electronic properties of metal halide perovskite materials. On the one hand, doping Ln³⁺ ions can convert near-infrared/ultraviolet light into visible light through the process of up-/down-conversion and then the absorption efficiency of solar spectrum by perovskite solar cells can be significantly increased, leading to high device power conversion efficiency. On the other hand, multi-color light emissions and white light emissions originated from perovskite nanocrystals can be realized via inserting Ln³⁺ ions into the perovskite crystal lattice, which functioned as quantum cutting. In addition, doping or co-doping Ln³⁺ ions in perovskite films or devices can effectively facilitate perovskite film growth, tailor the energy band alignment and passivate the defect states, resulting in improved charge carrier transport efficiency or reduced nonradiative recombination. Finally, Ln³⁺ ions have also been used in the fields of photodetectors and luminescent solar concentrators. These indicate the huge potential of rare-earth metals in improving the perovskite optoelectronic device performances.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

Two luminescent film sensors constructed from new lanthanide coordination polymers for ratiometric detection of Zn2+ and NH3 in water and their white emission properties

Two luminescent film sensors constructed from new lanthanide coordination polymers based on a new tetra-monodentated ligand for ratiometric detection of Zn2+ and NH3 in water were developed.