Sulfur-Rich Polymers Based Cathode with Epoxy/Ally Dual-Sulfur-Fixing Mechanism for High Stability Lithium-Sulfur Battery

Coordinatively Unsaturated Co Single-Atom Catalysts Enhance the Performance of Lithium-Sulfur Batteries by Triggering Strong d-p Orbital Hybridization

The catalytic activities displayed by single-atom catalysts (SACs) depend on the coordination structure. SACs supported on carbon materials often adopt saturated coordination structures with uneven distributions because they require high-temperature conditions during synthesis. Herein, bisnitrogen-chelated Co SACs that are coordinatively unsaturated are prepared by integrating a Co complex into a conjugated microporous polymer (CMP-CoN2). Compared with saturated analogues, i.e., tetranitrogen-chelated Co SACs (denoted as CMP-CoN4), CMP-CoN2 exhibits higher electrocatalytic activity in polysulfide conversions due to an enhanced hybridization between the 3d orbitals of the Co atoms and the 3p orbitals of the S atoms in the polysulfide. As a result, sulfur cathodes prepared with CoN2 deliver outstanding performance metrics, including a high specific capacity (1393 mA h g-1 at 0.1 C), a superior rate capacity (673.2 mA h g-1 at 6 C), and a low capacity decay rate (of only 0.045% per cycle at 2 C over 1000 cycles). They also outperform sulfur cathodes that contain CMP-CoN4 or CMPs that are devoid of Co SACs. This work reveals how the catalytic activity displayed by SACs is affected by their coordination structures, and the rules that underpin the structure-activity relationship may be extended to designing electrocatalysts for use in other applications.

Transforming Element Sulfur to High Performance Closed-Loop Recyclable Polymer via Proton Transfer Enabled Anionic Hybrid Copolymerization

The utilization of sulfur has been a global issue. Copolymerization of element sulfur (S8) with other monomers is a promising route to convert it to useful materials but is limited by the comonomers. Here, we report anionic hybrid copolymerization of S8 with acrylate and epoxide at room temperature, where S8 does not copolymerize with epoxide in the absence of acrylate. Yet, the proton transfer from the methyne in acrylate to the oxygen anion enables the ring-opening of the cyclic comonomer and hence the copolymerization. The cyclic comonomers can be expanded to lactone and cyclic carbonate. Specifically, the copolymer of S8 with bisphenl A diglycidyl ether and diacrylate displays mechanical properties comparable to those of most common plastics, namely, it has ultimate tensile strength as high as 60.8 MPa and Young's modulus up to 680 MPa. It also exhibits high UV resistance and good transparency. Particularly, it has excellent UV-induced self-healing, reprocessability and closed-loop recyclability due to the abundant dynamic S-S bonds and ester groups. This study provides an efficient strategy to turn element sulfur into closed-loop recyclable polymer with high mechanical and optical performances.

Inverse Vulcanization of Activated Norbornenyl Esters-A Versatile Platform for Functional Sulfur Polymers

Elemental sulfur has shown to be a promising alternative feedstock for development of novel polymeric materials with high sulfur content. However, the utilization of inverse vulcanized polymers is restricted by the limitation of functional comonomers suitable for an inverse vulcanization. Control over properties and structure of inverse vulcanized polymers still poses a challenge to current research due to the dynamic nature of sulfur-sulfur bonds and high temperature of inverse vulcanization reactions. In here, we report for the first time the inverse vulcanization of norbornenyl pentafluorophenyl ester (NB-PFPE), allowing for post-modification of inverse vulcanized polymers via amidation of reactive PFP esters to yield high sulfur content polymers under mild conditions. Amidation of the precursor material with three functional primary amines (α-amino-ω-methoxy polyethylene glycol, aminopropyl trimethoxy silane, allylamine) was investigated. The resulting materials were applicable as sulfur containing poly(ethylene glycol) nanoparticles in aqueous environment. Cross-linked mercury adsorbents, sulfur surface coatings, and high-sulfur content networks with predictable thermal properties were achievable using aminopropyl trimethoxy silane and allylamine for post-polymerization modification, respectively. With the broad range of different amines available and applicable for post-polymerization modification, the versatility of poly(sulfur-random-NB-PFPE) as a platform precursor polymer for novel specialized sulfur containing materials was showcased.

Sulfonic Acid-Functionalized Graphdiyne for Effective Li-S Battery Separators

Lithium-sulfur (Li-S) batteries enable a promising high-energy-storage system while facing practical challenges regarding lithium dendrites and lithium polysulfides (LiPSs) shuttling. Herein, a fascinating SO3H-functionalized graphdiyne (SOGDY) was developed by grafting SO3H onto GDY to modify the separator in Li-S batteries. It realizes structure-retained material transformation, that is, SOGDY retains the crystalline all-carbon network and uniform subnanopores from the initial GDY. The abundant SO3H and uniform pores create a rapid Li+ transport relay station, benefit rapid Li+ transport and even lithium deposition, and prevent lithium dendrite growth. The spatial obstruction and strong polar adsorption sites from SO3H effectively inhibit LiPS shuttling. Additionally, SOGDY establishes a fast electron-transfer pathway to facilitate the LiPS conversion. The SOGDY/PP separator exhibited steady cycling at 1 mA cm-2 over 3500 h in the Li∥Li symmetric battery and achieved outstanding low-temperature and high-rate performance in the Li-S battery with a high initial specific capacity of 804.5 mA h g-1 and a final capacity of 504.9 mA h g-1 after 500 cycles at 3 C and -10 °C. This work demonstrates that introducing a stable all-carbon network and uniform functionalized nanopores is an effective strategy to modify the Li-S battery separator.

Modulating the Coordination Chemistry of Cobalt Catalytic Sites by Ruthenium Species to Accelerate the Polysulfide Conversion Kinetics in Lithium-Sulfur Batteries

The performance of lithium-sulfur batteries is compromised by the loss of sulfur as dissolved polysulfides in the electrolyte and consequently the polysulfide redox shutting effect. Accelerating the conversion kinetics of polysulfide intermediates into sulfur or lithium sulfide through electrocatalysis has emerged as a root-cause solution. Co-N-C composite electrocatalyst is commonly used for this purpose. It is illustrated here that how the effectiveness can be improved by modulating the coordination chemistry of Co-N-C catalytic sites through introducing Ru species (RuCo-NC). The well-dispersed Ru in the Co-NC carbon matrix altered the total charge distribution over the Co-N-C catalytic sites and led to the formation of electron-rich Co-N, which is highly active for the polysulfide conversion reactions. Using Ru to modulate the electronic structure in the Co-N-C configuration and the additional catalytic sites over the Ru-Nx species can manifest optimal adsorption behavior of polysulfides. Consequently, the sulfur cathode with RuCo-NC can reduce the capacity fade rate from 0.11 % per cycle without catalyst (initial capacity of 701 mAh g-1) to 0.054 % per cycle (initial capacity of 1074 mAh g-1) over 400 cycles at 0.2 C rate. The results of this study provide the evidence for a feasible catalyst modification strategy for the polysulfide electrocatalysis.

Achievements, challenges, and perspectives in the design of polymer binders for advanced lithium-ion batteries

Energy storage devices with high power and energy density are in demand owing to the rapidly growing population, and lithium-ion batteries (LIBs) are promising rechargeable energy storage devices. However, there are many issues associated with the development of electrode materials with a high theoretical capacity, which need to be addressed before their commercialization. Extensive research has focused on the modification and structural design of electrode materials, which are usually expensive and sophisticated. Besides, polymer binders are pivotal components for maintaining the structural integrity and stability of electrodes in LIBs. Polyvinylidene difluoride (PVDF) is a commercial binder with superior electrochemical stability, but its poor adhesion, insufficient mechanical properties, and low electronic and ionic conductivity hinder its wide application as a high-capacity electrode material. In this review, we highlight the recent progress in developing different polymeric materials (based on natural polymers and synthetic non-conductive and electronically conductive polymers) as binders for the anodes and cathodes in LIBs. The influence of the mechanical, adhesion, and self-healing properties as well as electronic and ionic conductivity of polymers on the capacity, capacity retention, rate performance and cycling life of batteries is discussed. Firstly, we analyze the failure mechanisms of binders based on the operation principle of lithium-ion batteries, introducing two models of "interface failure" and "degradation failure". More importantly, we propose several binder parameters applicable to most lithium-ion batteries and systematically consider and summarize the relationships between the chemical structure and properties of the binder at the molecular level. Subsequently, we select silicon and sulfur active electrode materials as examples to discuss the design principles of the binder from a molecular structure point of view. Finally, we present our perspectives on the development directions of binders for next-generation high-energy-density lithium-ion batteries. We hope that this review will guide researchers in the further design of novel efficient binders for lithium-ion batteries at the molecular level, especially for high energy density electrode materials.

Advanced Polymers in Cathodes and Electrolytes for Lithium-Sulfur Batteries: Progress and Prospects

Lithium-sulfur (Li-S) batteries, which store energy through reversible redox reactions with multiple electron transfers, are seen as one of the promising energy storage systems of the future due to their outstanding advantages. However, the shuttle effect, volume expansion, low conductivity of sulfur cathodes, and uncontrollable dendrite phenomenon of the lithium anodes have hindered the further application of Li-S batteries. In order to solve the problems and clarify the electrochemical reaction mechanism, various types of materials, such as metal compounds and carbon materials, are used in Li-S batteries. Polymers, as a class of inexpensive, lightweight, and electrochemically stable materials, enable the construction of low-cost, high-specific capacity Li-S batteries. Moreover, polymers can be multifunctionalized by obtaining rich structures through molecular design, allowing them to be applied not only in cathodes, but also in binders and solid-state electrolytes to optimize electrochemical performance from multiple perspectives. The most widely used areas related to polymer applications in Li-S batteries, including cathodes and electrolytes, are selected for a comprehensive overview, and the relevant mechanisms of polymer action in different components are discussed. Finally, the prospects for the practical application of polymers in Li-S batteries are presented in terms of advanced characterization and mechanistic analysis.

The "dual-layer sulfur cathode" strategy: An In2S3/Bi2S3@rGO heterostructure as an interlayer/modified separator for boosting the areal capacities of lithium-sulfur batteries

The specific energies and energy densities of lithium-sulfur (Li-S) batteries are influenced by various cell parameters, including the sulfur loading, the sulfur weight percentage in the cathode, and the electrolyte/sulfur ratio. An In2S3/Bi2S3@rGO heterostructure was obtained by growing indium sulfide nanoparticles on the surface of bismuth sulfide nanoflowers in a graphene oxide (GO) solution via a one-step solvothermal approach. This structure was introduced as a modified separator/dual-layer sulfur cathode for Li-S batteries. The Bi2S3/In2S3 heterointerfaces act as active sites to speed up interfacial electron transfer, along with the entrapment, diffusion, and transformation of lithium polysulfides. A Li-S cell containing a dual-layer sulfur cathode (thin layer of In2S3/Bi2S3@rGO sandwiched between two thick layers of sulfur) and coupled with an In2S3/Bi2S3@rGO-coated separator suppressed the polysulfide shuttle effect. The cell based on the dual-layer sulfur cathode technology and operated at a current rate of 0.3C achieved a high capacity (7.1 mAh cm-2) after the 200th cycle, giving an electrolyte/sulfur ratio (10 µL mg-1) under a high sulfur loading (11.53 mg cm-2). These results demonstrate the unique nature of the dual-layer sulfur cathode technique, which can yield high energy density Li-S batteries with high sulfur loadings and low electrolyte/sulfur ratios.

Diagnosing and Correcting the Failure of the Solid-State Polymer Electrolyte for Enhancing Solid-State Lithium-Sulfur Batteries

Solid-state polymer electrolytes (SPEs) attract great interest in developing high-performance yet reliable solid-state batteries. However, understanding of the failure mechanism of the SPE and SPE-based solid-state batteries remains in its infancy, posing a great barrier to practical solid-state batteries. Herein, the high accumulation and clogging of "dead" lithium polysulfides (LiPS) on the interface between the cathode and SPE with intrinsic diffusion limitation is identified as a critical failure cause of SPE-based solid-state Li-S batteries. It induces a poorly reversible chemical environment with retarded kinetics on the cathode-SPE interface and in bulk SPEs, starving the Li-S redox in solid-state cells. This observation is different from the case in liquid electrolytes with free solvent and charge carriers, where LiPS dissolve but remain alive for electrochemical/chemical redox without interfacial clogging. Electrocatalysis demonstrates the feasibility of tailoring the chemical environment in diffusion-restricted reaction media for reducing Li-S redox failure in the SPE. It enables Ah-level solid-state Li-S pouch cells with a high specific energy of 343 Wh kg^-1 on the cell level. This work may shed new light on the understanding of the failure mechanism of SPE for bottom-up improvement of solid-state Li-S batteries.

Colloid Electrolyte with Changed Li+ Solvation Structure for High-Power, Low-Temperature Lithium-Ion Batteries

Lithium-ion batteries currently suffer from low capacity and fast degradation under fast charging and/or low temperatures. In this work, a colloid liquid electrolyte (CLE) is designed, where the trace amount of lithium thiocarbonate (LTC) colloids in commercial carbonate electrolyte (1 m LiPF₆ in ethylene carbonate/dimethyl carbonate) not only boosts up σ_Li+ but also improves the Li⁺ transfer kinetics at LiNi_0.8 Co_0.15 Al_0.05 O₂ (NCA) cathode/electrolyte interface. The competitive coordination of LTCs with anions and solvents facilitates the dissociation of lithium salts and Li⁺ decoupling, dramatically enhancing the σ_Li+ (15 to 4.5 mS cm^-1 at 30 and -20 °C, respectively); meanwhile, the desolvation process is accelerated. It demonstrates that LTC colloids induce an ≈5 nm ultrathin Li₂ CO₃ -rich cathode electrolyte interface and infuse the grain boundary of NCA particles, enhancing interfacial Li⁺ transfer and inhibiting the particle cracks during cycling. Consequently, the Li||CLE||NCA battery delivers a maximum capacity of 135 mAh g^-1 at a 10 C rate with 80% retention after 2000 cycles. Moreover, the fast-charging capability under a sub-zero environment is proved (122 mAh g^-1 with 90% retention after 400 cycles at 2 C and -10 °C). This strategy for tailoring the interfacial charge transfer appears generalizable and can practically be extended to next-generation energy-storage systems.

Proton-Induced Defect-Rich Vanadium Oxides as Reversible Polysulfide Conversion Sites for High-Performance Lithium Sulfur Batteries

Lithium-sulfur (Li-S) batteries have attracted attention due to their high theoretical energy density, natural abundance, and low cost. However, the diffusion of polysulfides decreases the utilization and further degrades the battery's life. We have successfully fabricated a defect-rich layered sodium vanadium oxide with proton doping (HNVO) nanobelt and used it as the functional interface layer on the separator in Li-S batteries. Benefiting from the abundant defects of NVO and the catalytic activity of metal vanadium in the electrochemical process, the shuttle of polysulfides was greatly decreased by reversible chemical adsorption. Moreover, the extra graphene layer contributes to accelerating the charge carrier at high current densities. Therefore, a Li-S battery with G@HNVO delivers a high capacity of 1494.8 mAh g^-1 at 0.2 C and a superior cycling stability over 700 cycles at 1 C. This work provides an effective strategy for designing the electrode/separator interface layer to achieve high-performance Li-S batteries.

Organosulfur Materials for Rechargeable Batteries: Structure, Mechanism, and Application

Lithium-ion batteries have received significant attention over the last decades due to the wide application of portable electronics and increasing deployment of electric vehicles. In order to further enhance the performance of the batteries and overcome the capacity limitations of inorganic electrode materials, it is imperative to explore new cathode and functional materials for rechargeable lithium batteries. Organosulfur materials containing sulfur-sulfur bonds as a kind of promising organic electrode materials have the advantages of high capacities, abundant resources, tunable structures, and environmental benignity. In addition, organosulfur materials have been widely used in almost every aspect of rechargeable batteries because of their multiple functionalities. This review aims to provide a comprehensive overview on the development of organosulfur materials including the synthesis and application as cathode materials, electrolyte additives, electrolytes, binders, active materials in lithium redox flow batteries, and other metal battery systems. We also give an in-depth analysis of structure-property-performance relationship of organosulfur materials, and guidance for the future development of organosulfur materials for next generation rechargeable lithium batteries and beyond.

Unraveling Polysulfide's Adsorption and Electrocatalytic Conversion on Metal Oxides for Li-S Batteries

Lithium sulfur (LiS) batteries possess high theoretical capacity and energy density, holding great promise for next generation electronics and electrical vehicles. However, the LiS batteries development is hindered by the shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPSs). Designing highly polar materials such as metal oxides (MOs) with moderate adsorption and effective catalytic activity is essential to overcome the above issues. To design efficient MOs catalysts, it is critical and necessary to understand the adsorption mechanism and associated catalytic processes of LiPSs. However, most reviews still lack a comprehensive investigation of the basic mechanism and always ignore their in-depth relationship. In this review, a systematic analysis toward understanding the underlying adsorption and catalytic mechanism in LiS chemistry as well as discussion of the typical works concerning MOs electrocatalysts are provided. Moreover, to improve the sluggish "adsorption-diffusion-conversion" process caused by the low conductive nature of MOs, oxygen vacancies and heterostructure engineering are elucidated as the two most effective strategies. The challenges and prospects of MOs electrocatalysts are also provided in the last section. The authors hope this review will provide instructive guidance to design effective catalyst materials and explore practical possibilities for the commercialization of LiS batteries.

An Unprecedented Fireproof, Anion-Immobilized Composite Electrolyte Obtained via Solidifying Carbonate Electrolyte for Safe and High-Power Solid-State Lithium-Ion Batteries

The update of electrolytes from a liquid state to a solid state is considered effective in improving the safety and energy density of lithium-ion batteries (LIBs). Although numerous efforts have been made, solid-state electrolytes' (SSEs) insufficient charge transfer capability remains a significant obstruction to practical applications. Herein, a fireproof and anion-immobilized composite electrolyte is designed by solidifying carbonate electrolyte, exhibiting superior Li-ion conductivity (11.5 mS cm^-1 at 30 °C) and Li-ion transference number (0.90), which endows LIBs excellent rate capability and cycling stability. Elaborate characteristics and theoretical calculations demonstrate the presence of robust anion-molecule coordination (composed of lithium bond and Coulomb force) enables a more efficient ion transport, where the mobility of Li⁺ ion is enhanced meanwhile the anions are immobilized. This work highlights how the strong interactions between electrolyte components can be used to simultaneously regulate the migration of Li⁺ ion and anion, and realize a one-step conversion of inflammable liquid-state electrolyte to nonflammable solid-state electrolyte.

Ni-CeO2 Heterostructures in Li-S Batteries: A Balancing Act between Adsorption and Catalytic Conversion of Polysulfide

Lithium-sulfur (Li-S) batteries have attracted considerable attention over the last two decades because of a high energy density and low cost. However, the wide application of Li-S batteries has been severely impeded due to the poor electrical conductivity of S, shuttling effect of soluble lithium polysulfides (LiPSs), and sluggish redox kinetics of S species, especially under high S loading. To address all these issues, a Ni-CeO₂ heterostructure-doped carbon nanofiber (Ni-CeO₂ -CNF) is developed as an S host that combines the strong adsorption with the high catalytic activity and the good electrical conductivity, where the LiPSs anchored on the heterostructure surface can directly gain electrons from the current collector and realize a fast conversion between S₈ and Li₂ S. Therefore, Li-S batteries with S@Ni-CeO₂ -CNF cathodes exhibit superior long-term cycling stability, with a capacity decay of 0.046% per cycle over 1000 cycles, even at 2 C. Noteworthy, under a sulfur loading up to 6 mg cm^-2 , a high reversible areal capacity of 5.3 mAh cm^-2 can be achieved after 50 cycles at 0.1 C. The heterostructure-modified S cathode effectively reconciles the thermodynamic and kinetic characteristics of LiPSs for adsorption and conversion, furthering the development of high-performance Li-S batteries.

Regulating the Molecular Interactions in Polymer Binder for High-Performance Lithium-Sulfur Batteries

Polymer binders have been shown to efficiently conquer the notorious lithium polysulfide (LiPS) shuttle effects in lithium-sulfur (Li-S) batteries for years, but more study is needed. Herein, a water dispersible and molecular interaction regulated polymer binder (PNAVS) for Li-S batteries was elaborately designed by co-polymerizing N-acryloyl glycinamide and 3-(1-vinyl-3-imidazolio)propanesulfonate. We demonstrate that by modulating the multiple interactions between the functional groups through copolymerization the binder was able to coordinate the LiPSs with higher binding energy for shuttle effect alleviation and cycling performance improvement. In addition, the Li⁺ diffusion coefficient is also optimized in the PNAVS binder, which facilitates acceleration of the redox kinetics during cycling. Consequently, the PNAVS binder renders the Li-S battery with an ultrastable open circuit voltage for more than 3000 h. Even with a high sulfur loading of 11.7 mg cm^-2, the battery can still exhibit excellent areal capacity of 12.21 mA h cm^-2. As proof of concept, a pouch cell was also demonstrated with the stable cycling performance for 110 cycles. The binder engineering strategy in this work will propel the practical applications of high-performance batteries.

Inverse Vulcanization of Norbornenylsilanes: Soluble Polymers with Controllable Molecular Properties via Siloxane Bonds

The inverse vulcanization produces high sulfur content polymers from alkenes and elemental sulfur. Control over properties such as the molar mass or the solubility of polymers is not well established, and existing strategies lack predictability or require large variations of the composition. Systematic design principles are sought to allow for a targeted design of materials. Herein, we report on the inverse vulcanization of norbornenylsilanes (NBS), with a different number of hydrolysable groups at the silicon atom. Inverse vulcanization of mixtures of NBS followed by polycondensation yielded soluble high sulfur content copolymers (50 wt % S) with controllable weight average molar mass (MW ), polydispersity (Đ), glass transition temperature (TG ), or zero-shear viscosity (η0 ). Polycondensation was conducted in the melt with HCl as a catalyst, abolishing the need for a solvent. Purification by precipitation afforded polymers with a greatly reduced amount of low molar mass species.

Organosulfur polymer-based cathode materials for rechargeable batteries

Organosulfur polymer cathode materials have shown promising electrochemical performances in rechargeable batteries. This review covers recent developments of the polymer cathodes and the remaining challenges and future prospects are discussed.

Polymerizations with Elemental Sulfur: From Petroleum Refining to Polymeric Materials

The production of elemental sulfur from petroleum refining has created a technological opportunity to increase the valorization of elemental sulfur by the synthesis of high-performance sulfur-based plastics with improved optical, electrochemical, and mechanical properties aimed at applications in thermal imaging, energy storage, self-healable materials, and separation science. In this Perspective, we discuss efforts in the past decade that have revived this area of organosulfur and polymer chemistry to afford a new class of high-sulfur-content polymers prepared from the polymerization of liquid sulfur with unsaturated monomers, termed inverse vulcanization.