Coiled Conformation Hollow Carbon Nanosphere Cathode and Anode for High Energy Density and Ultrafast Chargeable Hybrid Energy Storage

A simple route to functionalized porous carbon foams from carbon nanodots for metal-free pseudocapacitors

The development of potent pseudocapacitive charge storage materials has emerged as an effective solution for closing the gap between high-energy density batteries and high-power density and long-lasting electrical double-layer capacitors. Sulfonyl compounds are ideal candidates owing to their rapid and reversible redox reactions. However, structural instability and low electrical conductivity hinder their practical application as electrode materials. This work addresses these challenges using a fast and clean laser process to interconnect sulfonated carbon nanodots into functionalized porous carbon frameworks. In this bottom-up approach, the resulting laser-converted three-dimensional (3D) turbostratic carbon foams serve as high-surface-area, conductive scaffolds for redox-active sulfonyl groups. This design enables efficient faradaic processes using pendant sulfonyl groups, leading to a high specific capacitance of 157.6 F g-1 due to the fast reversible redox reactions of sulfonyl moieties. Even at 20 A g-1, the capacitance remained at 78.4% due to the uniform distribution of redox-active sites on the graphitic domains. Additionally, the 3D-tsSC300 electrode showed remarkable cycling stability of >15 000 cycles. The dominant capacitive processes and kinetics were analysed using extensive electrochemical characterizations. Furthermore, we successfully used 3D-tsSC300 in flexible solid-state supercapacitors, achieving a high specific capacitance of up to 17.4 mF cm-2 and retaining 91.6% of the initial capacitance after 20 000 cycles of charge and discharge coupled with 90° bending tests. Additionally, an as-assembled flexible all-solid-state symmetric supercapacitor exhibits a high energy density of 12.6 mW h cm-3 at a high power density of 766.2 W cm-3, both normalized by the volumes of the full device, which is comparable or better than state-of-the-art commercial pseudocapacitors and hybrid capacitors. The integrated supercapacitor provides a wide potential window of 2.0 V using a serial circuit, showing great promise for metal-free energy storage devices.

Hollow carbon-based materials for electrocatalytic and thermocatalytic CO2 conversion

Electrocatalytic and thermocatalytic CO2 conversions provide promising routes to realize global carbon neutrality, and the development of corresponding advanced catalysts is important but challenging. Hollow-structured carbon (HSC) materials with striking features, including unique cavity structure, good permeability, large surface area, and readily functionalizable surface, are flexible platforms for designing high-performance catalysts. In this review, the topics range from the accurate design of HSC materials to specific electrocatalytic and thermocatalytic CO2 conversion applications, aiming to address the drawbacks of conventional catalysts, such as sluggish reaction kinetics, inadequate selectivity, and poor stability. Firstly, the synthetic methods of HSC, including the hard template route, soft template approach, and self-template strategy are summarized, with an evaluation of their characteristics and applicability. Subsequently, the functionalization strategies (nonmetal doping, metal single-atom anchoring, and metal nanoparticle modification) for HSC are comprehensively discussed. Lastly, the recent achievements of intriguing HSC-based materials in electrocatalytic and thermocatalytic CO2 conversion applications are presented, with a particular focus on revealing the relationship between catalyst structure and activity. We anticipate that the review can provide some ideas for designing highly active and durable catalytic systems for CO2 valorization and beyond.

Organic-Inorganic Hybrid Interfaces Enable the Preparation of Nitrogen-Doped Hollow Carbon Nanospheres as High-Performance Anodes for Lithium and Potassium-Ion Batteries

An abundant hollow nanostructure is crucial for fast Li⁺ and K⁺ diffusion paths and sufficient electrolyte penetration, which creates a highly conductive network for ionic and electronic transport. In this study, we successfully developed a molecular-bridge-linked, organic-inorganic hybrid interface that enables the preparation of in situ nitrogen-doped hollow carbon nanospheres. Moreover, the prepared HCNSs, with high nitrogen content of up to 10.4%, feature homogeneous and regular morphologies. The resulting HCNSs exhibit excellent lithium and potassium storage properties when used as electrode materials. Specifically, the HCNS-800 electrode demonstrates a stable reversible discharge capacity of 642 mA h g^-1 at 1000 mA g^-1 after 500 cycles for LIBs. Similarly, the electrode maintains a discharge capacity of 205 mA h g^-1 at 100 mA g^-1 after 500 cycles for KIBs. Moreover, when coupled with a high-mass-loading LiFePO₄ cathode to design full cells, the HCNS-800‖LiFePO₄ cells provide a specific discharge capacity of 139 mA h g^-1 at 0.1 C. These results indicate that the HCNS electrode has promising potential for use in high-energy and environmentally sustainable lithium-based and potassium-based batteries.

Design of Uniform Hollow Carbon Nanoarchitectures: Different Capacitive Deionization between the Hollow Shell Thickness and Cavity Size

Carbon-based materials with high capacitance ability and fast electrosorption rate are ideal electrode materials in capacitive deionization (CDI). However, traditional carbon materials have structural limitations in electrochemical and desalination performance due to the low capacitance and poor transmission channel of the prepared electrodes. Therefore, reasonable design of electrode material structure is of great importance for achieving excellent CDI properties. Here, uniform hollow carbon materials with different morphologies (hollow carbon nanospheres, hollow carbon nanorods, hollow carbon nano-pseudoboxes, hollow carbon nano-ellipsoids, hollow carbon nano-capsules, and hollow carbon nano-peanuts) are reasonably designed through multi-step template method and calcination of polymer precursors. Hollow carbon nanospheres and hollow carbon nano-pseudoboxes exhibit better capacitance and higher salt adsorption capacity (SAC) due to their stable carbonaceous structure during calcination. Moreover, the effects of the thickness of the shell and the size of the cavity on the CDI performance are also studied. HCNSs-0.8 with thicker shell (≈20 nm) and larger cavity (≈320 nm) shows the best SAC value of 23.01 mg g-1 due to its large specific surface area (1083.20 m2  g-1 ) and rich pore size distribution. These uniform hollow carbon nanoarchitectures with functional properties have potential applications in electrochemistry related fields.

Advances in Low-Temperature Dual-Ion Batteries

Fabricating rechargeable batteries for low-temperature (LT) applications is highly desired at high altitudes/latitudes, aerospace/subsea exploration, and defense. Lithium-ion batteries (LIBs) suffer from severe loss of capacity and energy/power density at sub-zero temperatures caused by the sluggish kinetics. By utilizing both cations and anions as charge carriers, dual-ion batteries (DIBs) become a nascent battery system for LT tolerance by overcoming ion-desolvation during discharge. Here, we summarize recent advances in LT DIBs. To begin with, distinctive advantages of DIBs at LTs are highlighted compared to LIBs, with a special attention to anion (de-)intercalation, and the in-depth understanding of key challenges for LT operation is discussed. The next major section deals with the exciting progress on the advanced strategies to improve the LT performance of DIBs, including alternative electrode materials, reliable electrolyte formulations, and construction of interphase protective layers. Finally, prospects and future developments in this exciting field of LT DIBs are suggested.