In Situ Surface Restraint-Induced Synthesis of Transition-Metal Nitride Ultrathin Nanocrystals as Ultrasensitive SERS Substrate with Ultrahigh Durability

Microsphere lens array embedded microfluidic chip for SERS detection with simultaneous enhancement of sensitivity and stability

Surface enhanced Raman spectroscopy (SERS) utilizes the fingerprint features of molecular vibrations to identify and detect substances. However, in traditional single focus excitation scenarios, its signal collection efficiency of the objective is restricted. Furthermore, the uneven distribution of samples on the SERS substrate would result in poor signal stability, while the excitation power is limited to avoid sample damage. SERS detection system always requires precise adjustment of focal length and spot size, making it difficult for point-of-care testing applications. Here, we proposed a SERS microfluidic chip with barium titanate microspheres array (BTMA) embedded using vacuum self-assembled hot-pressing method for SERS detection with simultaneous enhancement of sensitivity and stability. Due to photonic nano-jets and directional antenna effects, high index microspheres are perfect micro-lens for effective light focusing and signal collecting. The BTMA can not only disperse excitation beam into an array of focal points covering the target uniformly with very low signal fluctuation, but enlarge the power threshold for higher signal intensity. We conducted a proof-of-principle experiment on chip for the detection of bacteria with immuno-magnetic tags and immuno-SERS tags. Together with magnetic and ultrasonic operations, the target bacteria in the flow were evenly congregated on the focal plane of BTMA. It demonstrated a limit of detection of 5 cells/mL, excellent signal reproducibility (error∼4.84%), and excellent position tolerance of 500 μm in X-Y plane (error∼5.375%). It can be seen that BTMA-SERS microfluidic chip can effectively solve the contradiction between sensitivity and stability in SERS detection.

An Ultra-broadband Metallic Plasmonic Antenna for Ultrasensitive Molecular Fingerprint Identification

Near-field enhanced mid-infrared light-matter interactions via metallic plasmonic antennae (PA) have attracted much attention but are inevitably limited by the detuning between their narrow band and the broad applied spectral range. Here, we develop a new low-temperature incubation synthetic method to acquire uniform Ag microparticles (MPs) with numerous hotspots. Their plasmonic band is remarkably extended by the plasmonic coupling of numerous hotspots and covers the entire mid-infrared range (400-4000 cm-1). Hence, the almost complete molecular fingerprint of 4-mercaptobenzonitrile was successfully probed for the first time via resonant surface-enhanced infrared absorption (rSEIRA), and the rSEIRA spectra of different essential amino acids were further detected and exhibit a high spectral identification degree assisted by machine learning. This work changes the inertia perception of "narrow band and large size but small hotspot area" of mid-infrared metallic PA and paves the way for the ultrasensitive mid-infrared optical sensing.

Carboxyl-functionalized two-dimensional MXene-Au nanocomposites were prepared as SERS substrates for the detection of melamine in dairy products

In the present study, we address the limitations of conventional surface-enhanced Raman scattering (SERS) techniques for sensitive and stable detection of melamine in food products, especially dairy. To overcome these challenges, we developed a novel SERS-active substrate by incorporating gold nanoparticles (AuNPs) onto carboxyl-functionalized two-dimensional (2D) MXene material doped with nitrides, specifically Au-Ti2N-COOH. Our strategy leverages the unique physicochemical properties of MXene, a class of atomically thin, 2D transition metal carbides/nitrides, with tunable surface functionalities. By modifying the MXene surface with AuNPs and introducing carboxyl groups (-COOH), we successfully enhanced the interaction between the substrate and melamine molecules. The carboxyl groups form hydrogen bonds with the amino groups on the melamine's triazine ring, facilitating the adsorption of melamine molecules within the 'hotspot' regions responsible for SERS signal amplification. A series of characterization methods were used to confirm the successful synthesis of Au-Ti2N-COOH composites.Using Au-Ti2N-COOH as the SERS substrate, we detected melamine in spiked dairy product samples with significantly enhanced sensitivity and stability compared to nitride-doped MXene alone. The detection limit in liquid milk stands at 3.7008 μg kg-1, with spike recovery rates ranging from 99.84% to 107.55% and an approximate RSD of 5%. This work demonstrates the effectiveness of our approach in designing a label-free, rapid, and robust SERS platform for the accurate quantitation of melamine contamination in food, thereby mitigating health risks associated with melamine adulteration.

ZnO Nanocages Decorated with Au@AgAu Yolk-Shell Nanomaterials for SERS-Based Detection of Hyperuricemia

Surface-enhanced Raman scattering (SERS) is widely recognized as a highly sensitive technology for chemical detection and biological sensing. In SERS-based biomedical applications, developing highly efficient sensing platforms based on SERS plays a pivotal role in monitoring disease biomarker levels and facilitating the early detection of cancer biomarkers. Hyperuricemia, characterized by abnormally high concentrations of uric acid (UA) in the blood, was associated with a range of diseases, such as gouty arthritis, heart disease, and acute kidney injury. Recent reports have demonstrated the correlation between UA concentrations in blood and tears. In this work, we report the fabrication of SERS substrates utilizing ZnO nanocages and yolk-shell-structured plasmonic nanomaterials for the noninvasive detection of UA in tears. This innovative SERS substrate enables noninvasive and sensitive detection of UA to prevent hyperuricemia-related diseases.

Bifunctional Mo2N Nanoparticles with Nanozyme and SERS Activity: A Versatile Platform for Sensitive Detection of Biomarkers in Serum Samples

The combined application of nanozymes and surface-enhanced Raman scattering (SERS) provides a promising approach to obtain label-free detection. However, developing nanomaterials with both highly efficient enzyme-like activity and excellent SERS sensitivity remains a huge challenge. Herein, we proposed one-step synthesis of Mo2N nanoparticles (NPs) as a "two-in-one" substrate, which exhibits both excellent peroxidase (POD)-like activity and high SERS activity. Its mimetic POD activity can catalyze the 3,3',5,5'-tetramethylbenzidine (TMB) molecule to SERS-active oxidized TMB (ox-TMB) with high efficiency. Furthermore, combining experimental profiling with theory, the mechanism of POD-like activity and SERS enhancement of Mo2N NPs was explored in depth. Benefiting from the outstanding properties of Mo2N NPs, a versatile platform for indirect SERS detection of biomarkers was developed based on the Mo2N NPs-catalyzed product ox-TMB, which acts as the SERS signal readout. The feasibility of this platform was validated using glutathione (GSH) and target antigens alpha-fetoprotein antigen (AFP) and carcinoembryonic antigen (CEA) as representatives of small molecules with a hydroxyl radical (·OH) scavenging effect and proteins with a low Raman scattering cross-section, respectively. The limits of detection of GSH, AFP, and CEA were as low as 0.1 μmol/L, 89.1, and 74.6 pg/mL, respectively. Significantly, it also showed application in human serum samples with recoveries ranging from 96.0 to 101%. The acquired values based on this platform were compared with the standard electrochemiluminescence method, and the relative error was less than ±7.3. This work not only provides a strategy for developing highly active bifunctional nanomaterials but also manifests their widespread application for multiple biomarkers analysis.

Novel Digital SERS-Microfluidic Chip for Rapid and Accurate Quantification of Microorganisms

In this work, we present a simple and novel digital surface-enhanced Raman spectroscopy (SERS)-microfluidic chip designed for the rapid and accurate quantitative detection of microorganisms. The chip employs a high-density inverted pyramid microcavity (IPM) array to separate and isolate microbial samples. The presence or absence of target microorganisms is determined by scanning the IPM array using SERS and identifying the characteristic Raman bands. This approach allows for the "digitization" of the SERS response of each IPM, enabling quantification through the application of mathematical statistical techniques. Significantly, precise quantitative detection of yeast was achieved within a concentration range of 106-109 cells/mL, with the maximum relative standard deviation from the concentration calibrated by the cultivation method being 5.6%. This innovative approach efficiently addresses the issue of irregularities in SERS quantitative detection, which arises due to fluctuations in SERS intensity and poor reproducibility. We strongly believe that this digital SERS-microfluidic chip holds immense potential for diverse applications in the rapid detection of various microorganisms, including pathogenic bacteria and viruses.

Thermoelectrically Driven Dual-Mechanism Regulation on SERS and Application Potential for Rapid Detection of SARS-CoV-2 Viruses and Microplastics

Electric-induced surface-enhanced Raman scattering (E-SERS) has been widely studied for its flexible regulation of SERS after the substrate is prepared. However, the enhancement effect is not sufficiently high in the E-SERS technology reported thus far, and no suitable field of application exists. In this study, a highly sensitive thermoelectrically induced SERS substrate, Ag/graphene/ZnO (AGZ), was fabricated using ZnO nanoarrays (NRs), graphene, and Ag nanoparticles (NPs). Applying a temperature gradient to the ZnO NRs enhanced the SERS signals of the probe molecules by a factor of approximately 20. Theoretical and experimental results showed that the thermoelectric potential enables the simultaneous modulation of the Fermi energy level of graphene and the plasma resonance peak of Ag NPs, resulting in a double enhancement in terms of physical and chemical mechanisms. The AGZ substrate was then combined with a mask to create a wearable thermoelectrically enhanced SERS mask for collecting SARS-CoV-2 viruses and microplastics. Its SERS signal can be enhanced by the temperature gradient created between a body heat source (∼37 °C) and a cold environment. The suitability of this method for virus detection was also examined using a reverse transcription-polymerase chain reaction and SARS-CoV-2 virus antigen detection. This work offers new horizons for research of E-SERS, and its application potential for rapid detection of the SARS-CoV-2 virus and microplastics was also studied.

Molecularly Confined Topochemical Transformation of MXene Enables Ultrathin Amorphous Metal-Oxide Nanosheets

Two-dimensional (2D) amorphous nanosheets with ultrathin thicknesses have properties that differ from their crystalline counterparts. However, conventional methods for growing 2D materials often produce either crystalline flakes or amorphous nanosheets with an uncontrollable thickness. Here, we report that ultrathin amorphous metal-oxide nanosheets featuring superior flatness can be realized through the molecularly confined topochemical transformation of MXene. Using MXene Ti2CTx as an example, we show that surface modification of Ti2CTx nanosheets with molecular ligands, such as oleylamine (OAm) and oleic acid (OA), not only imparts notable colloidal dispersity to Ti2CTx nanosheets in nonpolar organic solvents but also confines their subsequent oxidation to in-plane configurations. We demonstrate that unlike the drastic oxidation conventionally observed for pristine MXene, hydrophobizing MXene with OAm and OA ligands enables individual Ti2CTx nanosheets to undergo independent oxidation in a nondestructive manner, resulting in amorphous titanium oxide (am-TiO2) nanosheets that faithfully retain the dimension and flatness of pristine MXene. These am-TiO2 nanosheets exhibit exceptional activity as substrates for surface-enhanced Raman scattering. Importantly, this molecular confinement strategy can be extended to other MXene materials, providing a versatile approach for synthesizing ultrathin amorphous metal-oxide nanosheets with tailored compositions and functionalities.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

MoS2 Nanoplatelets on Hybrid Core-Shell (HyCoS) AuPd NPs for Hybrid SERS Platform for Detection of R6G

In this work, a novel hybrid SERS platform incorporating hybrid core-shell (HyCoS) AuPd nanoparticles (NPs) and MoS₂ nanoplatelets has been successfully demonstrated for strong surface-enhanced Raman spectroscopy (SERS) enhancement of Rhodamine 6G (R6G). A significantly improved SERS signal of R6G is observed on the hybrid SERS platform by adapting both electromagnetic mechanism (EM) and chemical mechanism (CM) in a single platform. The EM enhancement originates from the unique plasmonic HyCoS AuPd NP template fabricated by the modified droplet epitaxy, which exhibits strong plasmon excitation of hotspots at the nanogaps of metallic NPs and abundant generation of electric fields by localized surface plasmon resonance (LSPR). Superior LSPR results from the coupling of distinctive AuPd core-shell NP and high-density background Au NPs. The CM enhancement is associated with the charge transfer from the MoS₂ nanoplatelets to the R6G. The direct contact via mixing approach with optimal mixing ratio can effectively facilitate the charges transfer to the HOMO and LUMO of R6G, leading to the orders of Raman signal amplification. The enhancement factor (EF) for the proposed hybrid platform reaches ~10¹⁰ for R6G on the hybrid SERS platform.

Nanowire-in-bowl-shaped piezoelectric cavity structure for SERS directional detection of nanoplastics less than 50 nm

The accurate detection of nanoplastics is crucial due to their harmful effects on the environment and human beings. However, there is a lack of detection methods for nanoplastics smaller than 50 nm. In this research, we successfully constructed an Ag/CuO nanowire (NW)/BaTiO₃@Polyvinylidene fluoride (PVDF) Bowl-shaped substrate with a nanowire-in-Bowl-shaped piezoelectric cavity structure that can modulate surface-enhanced Raman scattering (SERS) by the piezoelectric effect by the virtue of the tip effect of the CuO NW and light focusing effect of the Bowl-shaped cavity. Due to its unique nanowire-in-Bowl-shaped structure and piezoelectrically modifiable ability, nanoplastics less than 50 nm were successfully detected and quantitatively analyzed. We believe that the Ag/CuO NW/BaTiO₃@PVDF Bowl-shaped substrate can provide an efficient, accurate, and feasible way to achieve qualitative and quantitative detection of nanoplastics.

Sulfur Vacancy-Rich CuS for Improved Surface-Enhanced Raman Spectroscopy and Full-Spectrum Photocatalysis

There are growing interests in the development of bifunctional semiconducting nanostructures for photocatalysis and real-time monitoring of degradation process on catalysts. Defect engineering is a low-cost approach to manipulating the properties of semiconductors. Herein, we prepared CuS nanoplates by a hydrothermal method at increasing amounts of thioacetamide (CS-1, CS-2, and CS-3) and investigated the influence of sulfur vacancy (V_s) on surface-enhanced Raman spectroscopy (SERS) and photocatalysis performance. SERS intensity of 4-nitrobenzenethiol on CS-3 is 346 and 17 times that of CS-1 and CS-2, respectively, and enhancement factor is 1.34 × 10⁴. Moreover, SERS is successfully applied to monitor the photodegradation of methyl orange. In addition, CS-3 also exhibited higher efficiency of Cr(VI) photoreduction than CS-1 and CS-2, and removal rate is 88%, 96%, and 73% under 2 h UV, 4 h visible, and 4 h near-infrared illumination, respectively. A systematic study including electron paramagnetic resonance spectra, photoelectrochemical measurements, and nitrogen adsorption isotherms were conducted to investigate the underlying mechanism. This work may help to understand the impact of vacancy defect on SERS and photocatalysis, and provide an effective and low-cost approach for the design of multifunctional materials.