Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

Facile Preparation of High-Performance Free-Standing Micro-Supercapacitors by Optimizing Oxygen Groups on Graphene

Free-standing micro-supercapacitor (MSC) devices without substrate or current collectors are promising for practical applications. However, it is still difficult to prepare high-performance free-standing MSC devices because of the requirement of optimized active sites, conductivity, ion diffusion, controlled patterns, moisture susceptibility, etc. Here, it is proposed that the optimization of oxygen level on graphene is promising to solve these requirements because of the balance of sp2 and sp3 hybridization. Using the medium-oxidized graphene, the flexible, conductive, hydro-stable, easy-processing film can be facilely obtained, which facilitates the preparation of free-standing MSC electrodes. After constructing with gel electrolyte, the free-standing MSC device shows a high capacitance of 898.4 mF cm-2 using aqueous-gel electrolyte and 383.6 mF cm-2 using ion-gel electrolyte with mass loading of ca. 10 mg cm-2. Correspondingly, the MSC device can achieve a landmark energy density of 42.6 µWh cm-2 at 0.85 mW cm-2 (7.1 mWh cm-3 at 141.7 mW cm-3). The advantages of high performance, facile preparation, and low inactive components make the free-standing MSC device promising for practical applications.

Recent progress of high-performance in-plane zinc ion hybrid micro-supercapacitors: design, achievements, and challenges

With the increasing demand for wearable and miniature electronics, in-plane zinc (Zn) ion hybrid micro-supercapacitors (ZIHMSCs), as a promising and compatible energy power source, have attracted tremendous attention due to their unique merits. Despite enormous development and breakthroughs in this field, there is still a lack of a systematic and comprehensive review to update the recent progress of in-plane ZIHMSCs in the design and fabrication of both micro-anodes and micro-cathodes, the exploration and optimization of new electrolytes, and the investigation of related-energy storage mechanisms. This minireview summarizes the key breakthroughs and recent advances in the construction of high-performance in-plane ZIHMSCs. First, the background and fundamentals of in-plane ZIHMSCs are briefly introduced. Then, new concepts, strategies, and latest exciting developments in the preparation and interfacial engineering of Zn metal micro-anodes, the fabrication of advanced micro-cathodes, and the exploration of new electrolyte systems are discussed, respectively. Finally, the key challenges and future directions for the development of high-performance in-plane ZIHMSCs are presented as well. This review not only accounts for the recent research progress in the field of the in-plane ZIHMSCs, but also provides important new insights into the design of next-generation miniaturized energy storage devices.

Carbon Nanotube Network Topology-Enhanced Iontronic Capacitive Pressure Sensor with High Linearity and Ultrahigh Sensitivity

Flexible capacitive pressure sensors with high sensitivity over a wide pressure range are highly anticipated in the fields of tactile perception and physiological signal monitoring. However, despite the introduction of microstructures on the electrolyte layer, the deformability is still limited due to the size limitation of the microstructures, making it difficult to significantly improve the sensitivity of iontronic capacitive pressure sensors (ICPSs). Here, we propose an innovative strategy of combining carbon nanotubes (CNTs) topological networks and ionic hydrogel micropyramid array microstructures that can significantly enhance the sensitivity of flexible ICPSs for ultrasensitive pressure detection. Compared with other previously reported ICPSs, the sensor developed in this work exhibits an unprecedented sensitivity (Smin > 1050 kPa-1) and a high linear response (R2 > 0.99) in a wide pressure range (0.03-28 kPa) enabled by CNT percolation networks inside the microstructred electrolyte layer. This ultrasensitive and flexible ICPS also can effectively detect pressure from a variety of sources, including sound waves, lightweight objects, and tiny physiological signals, such as pulse rate and heartbeat. This work provides a general strategy to achieve an ICPS with both broader pressure-response range and higher sensitivity, which provides a stable and efficient way for a low-cost, scalable sensor for sensitive tactile sensing in human-computer interaction applications.

3D printing of hierarchically micro/nanostructured electrodes for high-performance rechargeable batteries

3D printing, also known as additive manufacturing, is capable of fabricating 3D hierarchical micro/nanostructures by depositing a layer-upon-layer of precursor materials and solvent-based inks under the assistance of computer-aided design (CAD) files. 3D printing has been employed to construct 3D hierarchically micro/nanostructured electrodes for rechargeable batteries, endowing them with high specific surface areas, short ion transport lengths, and high mass loading. This review summarizes the advantages and limitations of various 3D printing methods and presents the recent developments of 3D-printed electrodes in rechargeable batteries, such as lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries. Furthermore, the challenges and perspectives of the 3D printing technique for electrodes and rechargeable batteries are put forward. This review will provide new insight into the 3D printing of hierarchically micro/nanostructured electrodes in rechargeable batteries and promote the development of 3D printed electrodes and batteries in the future.