Electrochemical NO3- Reduction Catalyzed by Atomically Precise Ag30Pd4 Bimetallic Nanocluster: Synergistic Catalysis or Tandem Catalysis?

Ultrathin cobalt-based nanosheets containing surface oxygen promoted near-complete nitrate removal

Electrocatalytic nitrate removal offers a sustainable approach to alleviate nitrate pollution and to boost the anthropogenic nitrogen cycle, but it still suffers from limited removal efficiency at high rates, especially at low levels of nitrate. Herein, we report the near-complete removal of low-level nitrate (10-200 ppm) within 2 h using ultrathin cobalt-based nanosheets (CoNS) containing surface oxygen, which was fabricated from in-situ electrochemical reconstruction of conventional nanosheets. The average nitrate removal of 99.7 % with ammonia selectivity of 98.2 % in 9 cyclic runs ranked in the best of reported catalysts. Powered by a solar cell under the winter sun, the full-cell nitrate electrolysis system, equipped with ultrathin CoNS, achieved 100 % nitrogen gas selectivity and 99.6 % total nitrogen removal. The in-situ Fourier Transform Infrared included experiments and theoretical computations revealed that in-situ electrochemical reconstruction not only increased electrochemical active surface area but also constructed surface oxygen in active sites, leading to enhanced stabilization of nitrate adsorption in a symmetry breaking configuration and charge transfer, contributing to near-complete nitrate removal on ultrathin CoNS. This work provides a strategy to design ultrathin nanocatalysts for nitrate removal.

Recent advances in synthesis and properties of silver nanoclusters

Achieving atomic precision in nanostructured materials is essential for comprehending formation mechanisms and elucidating structure-property relationships. Within the realm of nanoscience and technology, atomically precise ligand-protected noble metal nanoclusters (NCs) have emerged as a rapidly expanding area of interest. These clusters manifest quantum confinement-induced optoelectronic, photophysical, and chemical properties, along with remarkable catalytic capabilities. Among coinage metals, silver distinguishes itself for the fabrication of stable nanoclusters, primarily due to its cost-effectiveness compared to gold. This minireview provides an overview of recent advancements since 2020 in synthetic methodologies and ligand selections toward attaining NCs boasting a minimum of two free valence electrons. Additionally, it explores strategies for fine-tuning optical properties. The discussion extends to surface reactivity, elucidating how exposure to ligands, heat, and light induces transformations in size and structure. Of paramount significance are the applications of silver NCs in catalytic reactions for energy and chemical conversion, supplemented by in-depth mechanistic insights. Furthermore, the review delineates challenges and outlines future directions in the NC field, with an eye toward the design of new functional materials and prospective applications in diverse technologies, including optoelectronics, energy conversion, and fine chemical synthesis.

[Au9Ag6(CCR)10(DPPM)2Cl2](PPh4): a four-electron cluster with a bi-decahedral twisted metal core

The assembly of cluster units in a distinct manner can give rise to nanoclusters exhibiting unique geometrical structures and properties. Herein, we present a one-pot synthesis and structural characterization of a AuAg alloy cluster, [Au9Ag6(CCR)10(DPPM)2Cl2](PPh4), denoted as Au9Ag6 (where HCCR is 3,5-bis(trifluoromethyl)phenylacetylene, and DPPM is bis(diphenylphosphino)methane). Single-crystal X-ray diffraction data analysis reveals that Au9Ag6 features a distinctive Au7Ag6 bi-decahedral core, formed by a twisted assembly of two Au4Ag3 decahedra sharing one vertex. The Au4Ag3 building blocks are bridged by two gold atoms on opposite sides of the bi-decahedral core. The Au9Ag6 cluster is monoanionic and it is stabilized by two chloride, two DPPM and ten alkynyl ligands. This cluster represents the first instance of a cluster of clusters built upon decahedral units.

Stepwise structural evolution toward robust carboranealkynyl-protected copper nanocluster catalysts for nitrate electroreduction

Atomically precise metal nanoclusters (NCs) are emerging as idealized model catalysts for imprecise metal nanoparticles to unveil their structure-activity relationship. However, the directional synthesis of robust metal NCs with accessible catalytic active sites remains a great challenge. In this work, we achieved bulky carboranealkynyl-protected copper NCs, the monomer Cu13·3PF6 and nido-carboranealkynyl bridged dimer Cu26·4PF6, with fair stability as well as accessible open metal sites step by step through external ligand shell modification and metal-core evolution. Both Cu13·3PF6 and Cu26·4PF6 demonstrate remarkable catalytic activity and selectivity in electrocatalytic nitrate (NO3-) reduction to NH3 reaction, with the dimer Cu26·4PF6 displaying superior performance. The mechanism of this catalytic reaction was elucidated through theoretical computations in conjunction with in situ FTIR spectra. This study not only provides strategies for accessing desired copper NC catalysts but also establishes a platform to uncover the structure-activity relationship of copper NCs.

Thermally Enhanced Relay Electrocatalysis of Nitrate-to-Ammonia Reduction over Single-Atom-Alloy Oxides

The electrochemical nitrate reduction reaction (NO3RR) holds promise for converting nitrogenous pollutants to valuable ammonia products. However, conventional electrocatalysis faces challenges in effectively driving the complex eight-electron and nine-proton transfer process of the NO3RR while also competing with the hydrogen evolution reaction. In this study, we present the thermally enhanced electrocatalysis of nitrate-to-ammonia conversion over nickel-modified copper oxide single-atom alloy oxide nanowires. The catalyst demonstrates improved ammonia production performance with a Faradaic efficiency of approximately 80% and a yield rate of 9.7 mg h-1 cm-2 at +0.1 V versus a reversible hydrogen electrode at elevated cell temperatures. In addition, this thermally enhanced electrocatalysis system displays impressive stability, interference resistance, and favorable energy consumption and greenhouse gas emissions for the simulated industrial wastewater treatment. Complementary in situ analyses confirm that the significantly superior relay of active hydrogen species formed at Ni sites facilitates the thermal-field-coupled electrocatalysis of Cu surface-adsorbed *NOx hydrogenation. Theoretical calculations further support the thermodynamic and kinetic feasibility of the relay catalysis mechanism for the NO3RR over the Ni1Cu model catalyst. This study introduces a conceptual thermal-electrochemistry approach for the synergistic regulation of complex catalytic processes, highlighting the potential of multifield-coupled catalysis to advance sustainable-energy-powered chemical synthesis technologies.

Vibrational wave-packet dynamics of the silver pentamer probed by femtosecond NeNePo spectroscopy

Vibrational wave-packet dynamics on the ground electronic state of the neutral silver pentamer (Ag5) are studied by femtosecond (fs) pump-probe spectroscopy using the 'negative ion - to neutral - to positive ion' (NeNePo) excitation scheme. A vibrational wave packet is prepared on the 2A1 state of Ag5via photodetachment of mass-selected, cryogenically cooled Ag5- anions using a fs pump pulse. The temporal evolution of the vibrational wave packet is then probed by an ultrafast probe pulse via resonant multiphoton ionization to Ag5+. Frequency analysis of the fs NeNePo transients for pump-probe delay times from 0.2 to 8 ps reveals three primary beating frequencies at 157 cm-1, 101 cm-1 and 56 cm-1 as well as four weaker features. A comparison of these experimentally obtained beating frequencies to harmonic normal mode frequencies calculated from electronic structure calculations confirms that Ag5 in the gas phase adopts a planar trapezoidal geometry, similar to that previously observed in solid argon. The dependence of the ionization yield on the laser polarization indicates a s-d wave electron photodetachment from a 'p-type' occupied molecular orbital of Ag5. Franck-Condon analysis shows that both processes, photodetachment and subsequent photoionization determine the beating frequencies probed in the time-dependent cation yield. The present study extends the applicability of fs NeNePo spectroscopy to characterize the vibrational spectra in the far-IR frequency range in the absence of perturbations from a medium or a messenger atom to mass-selected neutral metal clusters with more than three atoms in the ground electronic states.

Tandem Nitrate-to-Ammonia Conversion on Atomically Precise Silver Nanocluster/MXene Electrocatalyst

Electrocatalytic reduction of nitrate (NO3 RR) to synthesize ammonia (NH3 ) provides a competitive manner for carbon neutrality and decentralized NH3 synthesis. Atomically precise nanoclusters, as an advantageous platform for investigating the NO3 RR mechanisms and actual active sites, remain largely underexplored due to the poor stability. Herein, we report a (NH4 )9 [Ag9 (mba)9 ] nanoclusters (Ag9 NCs) loaded on Ti3 C2 MXene (Ag9 /MXene) for highly efficient NO3 RR performance towards ambient NH3 synthesis with improved stability in neutral medium. The composite structure of MXene and Ag9 NCs enables a tandem catalysis process for nitrate reduction, significantly increasing the selectivity and FE of NH3 . Besides, compared with individual Ag9 NCs, Ag9 /MXene has better stability with the current density performed no decay after 108 hours of reaction. This work provides a strategy for improving the catalytic activity and stability of atomically precise metal NCs, expanding the mechanism research and application of metal NCs.

Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants

Catalyzed reduction processes have been recognized as important and supplementary technologies for water treatment, with the specific aims of resource recovery, enhancement of bio/chemical-treatability of persistent organic pollutants, and safe handling of oxygenate ions. Palladium (Pd) has been widely used as a catalyst/electrocatalyst in these reduction processes. However, due to the limited reserves and high cost of Pd, it is essential to gain a better understanding of the Pd-catalyzed decontamination process to design affordable and sustainable Pd catalysts. This review provides a systematic summary of recent advances in understanding Pd-catalyzed reductive decontamination processes and designing Pd-based nanocatalysts for the reductive treatment of water-borne pollutants, with special focus on the interactions and transformation mechanisms of pollutant molecules on Pd catalysts at the atomic scale. The discussion begins by examining the adsorption of pollutants onto Pd sites from a thermodynamic viewpoint. This is followed by an explanation of the molecular-level reaction mechanism, demonstrating how electron-donors participate in the reductive transformation of pollutants. Next, the influence of the Pd reactive site structure on catalytic performance is explored. Additionally, the process of Pd-catalyzed reduction in facilitating the oxidation of pollutants is briefly discussed. The longevity of Pd catalysts, a crucial factor in determining their practicality, is also examined. Finally, we argue for increased attention to mechanism study, as well as precise construction of Pd sites under batch synthesis conditions, and the use of Pd-based catalysts/electrocatalysts in the treatment of concentrated pollutants to facilitate resource recovery.

Diselenophosphate Ligands as a Surface Engineering Tool in PdH-Doped Silver Superatomic Nanoclusters

The first hydride-doped Pd/Ag superatoms stabilized by selenolates are reported: [PdHAg19(dsep)12] [dsep = Se2P(OiPr)2] 1 and [PdHAg20(dsep)12]+ 2. 1 was derived from the targeted transformation of [PdHAg19(dtp)12] [dtp = S2P(OiPr)2] by ligand exchange, whereas 2 was obtained from the addition of trifluoroacetic acid to 1, resulting in a symmetric redistribution of the capping silver atoms. The transformations are all achieved while retaining an 8-electron superatomic configuration. VT-NMR attests to the good stability of the NCs in solution, and single-crystal X-ray diffraction reveals the crucial role that the interstitial hydride plays in directing the position of the capping silver atoms. The total structures are reported alongside their electronic and optical properties. 1 and 2 are phosphorescent with a lifetime of 73 and 84 μs at 77 K, respectively. The first antibacterial activity data for superatomic bimetallic Pd/Ag nanoclusters are also reported.

Electrocatalytic Systems for NOx Valorization in Organonitrogen Synthesis

Inorganic nitrogen oxide (NOx ) species, such as NO, NO2 , NO3 - , NO2 - generated from the decomposition of organic matters, volcanic eruptions and lightning activated nitrogen, play important roles in the nitrogen cycle system and exploring the origin of life. Meanwhile, excessive emission of NOx gases and residues from industry and transportation causes troubling problems to the environment and human health. How to efficiently handle these wastes is a global problem. In response to the growing demand for sustainability, scientists are actively pursuing sustainable electrochemical technologies powered by renewable energy sources and efficient utilization of hydrogen energy to convert NOx species into high-value organonitrogen chemicals. In this minireview, recent advances of electrocatalytic systems for NOx species valorization in organonitrogen synthesis are classified and described, such as amino acids, amide, urea, oximes, nitrile etc., that have been widely applied in medicine, life science and agriculture. Additionally, the current challenges including multiple side reactions and complicated paths, viable solutions along with future directions ahead in this field are also proposed. The coupling electrocatalytic systems provide a green mode for fixing nitrogen cycle bacteria and bring enlightenment to human sustainable development.

Alkynyl-Protected Bimetallic Nanoclusters with a Hybrid Mackay Icosahedral Ag42 Cu12 Cl Kernel and an Octahedral Ag22 Cu12 Kernel

A facile strategy that directly reduces alkynyl-silver precursors and copper salts for the synthesis of bimetallic nanoclusters using the weak reducing agent Ph2 SiH2 is demonstrated. Two alkynyl-protected concentric-shell nanoclusters, (Ph4 P)2 [Ag22 Cu12 (C≡CR)28 ] and (Ph4 P)3 [Ag42 Cu12 Cl(C≡CR)36 ] (Ag22 Cu12 and Ag42 Cu12 Cl, R=bis(trifluoromethyl)phenyl), were successfully obtained and characterized by single-crystal X-ray diffraction and electro-spray ionization mass spectrometry. For the first time, a hybrid 55-atom two-shell Mackay icosahedron was found in Ag42 Cu12 Cl, which is icosahedral M54 Cl instead of M55 . The incorporation of a chloride in the metal icosahedron contributes to the stability of the cluster from both electronic and geometric aspects. Alkynyl ligands show various binding-modes including linear "RC≡C-Cu-C≡CR" staple motifs.

Alkynyl-protected Ag20 Rh2 Nanocluster with Atomic Precision: Structure Analysis and Tri-functionality Catalytic Application

We report the overall structure and trifunctionality catalytic application of an atomically precise alloy nanocluster of Ag20 Rh2 (C≡C-t Bu)16 (CF3 CO2 )6 (H2 O)2 (abbreviated as Ag20 Rh2 hereafter). Ag20 Rh2 has a twisted rod-like structure, where a Ag4 @Rh2 kernel is connected by two twisted Ag8 cubes on two sides. Ag20 Rh2 is a superatomic cluster with four free valence electrons, and it has characteristic absorbance feature. Interestingly, Ag20 Rh2 exhibited superior catalytic performance than the larger AgRh nanoparticle counterparts in electrochemical hydrogen evolution reaction (HER), reduction of 4-nitrophenol, and the methyl orange degradation reaction. Such intriguing catalytic properties are attributed to the more exposed active sites from the ultrasmall nanoclusters than relatively large nanoparticles. This study not only enriches the family member of alkynyl-protected AgRh nanoclusters with atomic precision, but also highlights the great advantages of employing nanoclusters as efficient catalysts for multiple functionalities.