Direct Visualization of Catalytically Active Sites at the FeO-Pt(111) Interface

Nanoscale Chemical Probing of Metal-Supported Ultrathin Ferrous Oxide via Tip-Enhanced Raman Spectroscopy and Scanning Tunneling Microscopy

Metal-supported ultrathin ferrous oxide (FeO) has attracted immense interest in academia and industry due to its widespread applications in heterogeneous catalysis. However, chemical insight into the local structural characteristics of FeO, despite its critical importance in elucidating structure-property relationships, remains elusive. In this work, we report the nanoscale chemical probing of gold (Au)-supported ultrathin FeO via ultrahigh-vacuum tip-enhanced Raman spectroscopy (UHV-TERS) and scanning tunneling microscopy (STM). For comparative analysis, single-crystal Au(111) and Au(100) substrates are used to tune the interfacial properties of FeO. Although STM images show distinctly different moiré superstructures on FeO nanoislands on Au(111) and Au(100), TERS demonstrates the same chemical nature of FeO by comparable vibrational features. In addition, combined TERS and STM measurements identify a unique wrinkled FeO structure on Au(100), which is correlated to the reassembly of the intrinsic Au(100) surface reconstruction due to FeO deposition. Beyond revealing the morphologies of ultrathin FeO on Au substrates, our study provides a thorough understanding of the local interfacial properties and interactions of FeO on Au, which could shed light on the rational design of metal-supported FeO catalysts. Furthermore, this work demonstrates the promising utility of combined TERS and STM in chemically probing the structural properties of metal-supported ultrathin oxides on the nanoscale.

Probing Catalytic Sites and Adsorbate Spillover on Ultrathin FeO2-x Film on Ir(111) during CO Oxidation

The spatially resolved identification of active sites on the heterogeneous catalyst surface is an essential step toward directly visualizing a catalytic reaction with atomic scale. To date, ferrous centers on platinum group metals have shown promising potential for low-temperature CO catalytic oxidation, but the temporal and spatial distribution of active sites during the reaction and how molecular-scale structures develop at the interface are not fully understood. Here, we studied the catalytic CO oxidation and the effect of co-adsorbed hydrogen on the FeO2-x/Ir(111) surface. Combining scanning tunneling microscopy (STM), isotope-labeled pulse reaction measurements, and DFT calculations, we identified both FeO2/Ir and FeO2/FeO sites as active sites with different reactivity. The trilayer O-Fe-O structure with its Moiré pattern can be fully recovered after O2 exposure, where molecular O2 dissociates at the FeO/Ir interface. Additionally, as a competitor, dissociated hydrogen migrates onto the oxide film with the formation of surface hydroxyl and water clusters down to 150 K.

Getting the Most Out of Fluorogenic Probes: Challenges and Opportunities in Using Single-Molecule Fluorescence to Image Electro- and Photocatalysis

Single-molecule fluorescence microscopy enables the direct observation of individual reaction events at the surface of a catalyst. It has become a powerful tool to image in real time both intra- and interparticle heterogeneity among different nanoscale catalyst particles. Single-molecule fluorescence microscopy of heterogeneous catalysts relies on the detection of chemically activated fluorogenic probes that are converted from a nonfluorescent state into a highly fluorescent state through a reaction mediated at the catalyst surface. This review article describes challenges and opportunities in using such fluorogenic probes as proxies to develop structure-activity relationships in nanoscale electrocatalysts and photocatalysts. We compare single-molecule fluorescence microscopy to other microscopies for imaging catalysis in situ to highlight the distinct advantages and limitations of this technique. We describe correlative imaging between super-resolution activity maps obtained from multiple fluorogenic probes to understand the chemical origins behind spatial variations in activity that are frequently observed for nanoscale catalysts. Fluorogenic probes, originally developed for biological imaging, are introduced that can detect products such as carbon monoxide, nitrite, and ammonia, which are generated by electro- and photocatalysts for fuel production and environmental remediation. We conclude by describing how single-molecule imaging can provide mechanistic insights for a broader scope of catalytic systems, such as single-atom catalysts.

Activating lattice oxygen of single-layer ZnO for the catalytic oxidation reaction

Tuning an oxide/metal interface is of critical importance for the performance enhancement of many heterogeneous catalytic reactions. However, catalytic oxidation occurring at the interface between non-reducible oxide and metal has been challenging, since non-reducible oxides hardly lose their lattice oxygen (O_L) or dissociate O₂ from the gas phase. In this work, a ZnO monolayer film on Au(111) is used as an inverse catalyst to investigate CO oxidation occurring at the ZnO/Au(111) interface via high pressure scanning tunneling microscopy. Surface science experiments indicate that oxygen intercalation under the ZnO monolayer film, termed ZnO/O/Au(111), can be achieved via a surface reaction with 1 × 10^-6 mbar O₃. Subsequent exposure of the formed ZnO/O/Au(111) surface to mbar CO at room temperature leads to the recovery of the pristine ZnO/Au(111) surface. Theoretical calculations reveal that O_L adjacent to intercalated oxygen (O_int) is activated due to the O_L-Zn-O_int bonding and surface corrugation, which can be directly involved in CO oxidation. Subsequently, O_int migrates to the formed oxygen vacancy from the subsurface resuming the pristine ZnO structure. These results thus reveal that oxygen intercalation underneath single-layer ZnO will strongly boost the oxidation reaction via activating adjacent lattice oxygen atoms.

Platinum-Iron(II) Oxide Sites Directly Responsible for Preferential Carbon Monoxide Oxidation at Ambient Temperature: An Operando X-ray Absorption Spectroscopy Study

Operando X-ray absorption spectroscopy identified that the concentration of Fe²⁺ species in the working state-of-the-art Pt-FeO_x catalysts quantitatively correlates to their preferential carbon monoxide oxidation steady-state reaction rate at ambient temperature. Deactivation of such catalysts with time on stream originates from irreversible oxidation of active Fe²⁺ sites. The active Fe²⁺ species are presumably Fe⁺² O^-2 clusters in contact with platinum nanoparticles; they coexist with spectator trivalent oxidic iron (Fe³⁺ ) and metallic iron (Fe⁰ ) partially alloyed with platinum. The concentration of active sites and, therefore, the catalyst activity strongly depends on the pretreatment conditions. Fe²⁺ is the resting state of the active sites in the preferential carbon monoxide oxidation cycle.

Structural Changes in Monolayer Cobalt Oxides under Ambient Pressure CO and O2 Studied by In Situ Grazing-Incidence X-ray Absorption Fine Structure Spectroscopy

We have used grazing incidence X-ray absorption fine structure spectroscopy at the cobalt K-edge to characterize monolayer CoO films on Pt(111) under ambient pressure exposure to CO and O₂, with the aim of identifying the Co phases present and their transformations under oxidizing and reducing conditions. X-ray absorption near edge structure (XANES) spectra show clear changes in the chemical state of Co, with the 2+ state predominant under CO exposure and the 3+ state predominant under O₂-rich conditions. Extended X-ray absorption fine structure spectroscopy (EXAFS) analysis shows that the CoO bilayer characterized in ultrahigh vacuum is not formed under the conditions used in this study. Instead, the spectra acquired at low temperatures suggest formation of cobalt hydroxide and oxyhydroxide. At higher temperatures, the spectra indicate dewetting of the film and suggest formation of bulklike Co₃O₄ under oxidizing conditions. The experiments demonstrate the power of hard X-ray spectroscopy to probe the structures of well-defined oxide monolayers on metal single crystals under realistic catalytic conditions.

Surface structure of mass-selected niobium oxide nanoclusters on Au(111)

The structures formed by the deposition of mass-selected niobium oxide clusters, Nb₃O_y(y = 5, 6, 7), onto Au(111) were studied by scanning tunneling microscopy. The as-deposited Nb₃O₇clusters assemble into large dendritic structures that grow on the terraces as well as extend from the top and bottom of step edges. The Nb₃O₆cluster also forms dendritic assemblies but they are generally much smaller in size. The assemblies are composed of smaller discrete structures (<1 nm) which are likely to be single clusters. The dendritic assemblies for both the Nb₃O₇and Nb₃O₆clusters have fractal dimensions of about 1.7 which is very close to that expected for simple diffusion limited aggregation. Annealing the Nb₃O_7,6/Au(111) surfaces up to 550 K results in changes in assembly sizes and increases in heights, while heating to 700 results in the disruption of the assemblies into smaller structures. By contrast, the as-deposited Nb₃O₅/Au(111) surface at RT exhibits compact cluster structures which become 3D nanoparticles when annealed above 550 K. Differences in the observed surface structures and thermal stability are attributed to differences in metal-oxygen stoichiometry which can influence cluster binding energies, mobility and inter-cluster interactions.

Exsolution of Iron Oxide on LaFeO3 Perovskite: A Robust Heterostructured Support for Constructing Self-Adjustable Pt-Based Room-Temperature CO Oxidation Catalysts

Constructing highly active and stable surface sites for O₂ activation is essential to lower the barrier of Pt-based catalysts for CO oxidation. Although a few active Pt-metal oxide interfaces have been reported, questions about the stability of these sites under the long-term storage and operation remain unresolved. Here, based on developing a robust FeO_x/LaFeO₃ heterostructure as a support, we constructed stable Pt-support interfaces to achieve highly active CO oxidation at room temperature. Even after it is kept in the air for more than 6 months, the catalyst (without pretreatment) still maintains the high activity like a fresh one, which is superior to metal hydroxide-Pt interfaces, and meets the requirements of long-term storage for emergency use. In situ characterizations and systematic reaction results showed that CO oxidation occurs through an alternative mechanism, which is triggered by intrinsic reactants and self-adjusted to a more active interface in the reaction process. Theoretical calculations and ⁵⁷Fe Mössbauer spectra revealed that abundant cation vacancies significantly increase the activity of surface oxygen species and should be responsible for this unique process. This work demonstrates an alternative concept to fabricate robust and highly active Pt-based catalysts for catalytic oxidation.

Size-dependent phase stability in transition metal dichalcogenide nanoparticles controlled by metal substrates

Nanomaterials based on MoS₂ and related transition metal dichalcogenides (TMDCs) are remarkably versatile; MoS₂ nanoparticles are proven catalysts for processes such as hydrodesulphurization and the hydrogen evolution reaction, and transition metal dichalcogenides in general have recently emerged as novel 2D components for nanoscale electronics and optoelectronics. The properties of such materials are intimately related to their structure and dimensionality. For example, only the edges exposed by MoS₂ nanoparticles (NPs) are catalytically active, and extended MoS₂ systems show different character (direct or indirect gap semiconducting, or metallic) depending on their thickness and crystallographic phase. In this work, we show how particle size and interaction with a metal surface affect the stability and properties of different MoS₂ NPs and the resulting phase diagrams. By means of calculations based on the Density Functional Theory (DFT), we address how support interactions affect MoS₂ nanoparticles of varying size, composition, and structure. We demonstrate that interaction with Au modifies the relative stability of the different nanoparticle types so that edge terminations and crystallographic phases that are metastable for free-standing nanoparticles and monolayers are expressed in the supported system. These support-effects are strongly size-dependent due to the mismatch between Au and MoS₂ lattices, which explains experimentally observed transitions in the structural phases for supported MoS₂ NPs. Accounting for vdW interactions and the contraction of the Au(111) surface underneath the MoS₂ is further found to be necessary for quantitatively reproducing experimental results. We finally find that support-induced effects on the stability of nanoparticle structures are general to TMDC nanoparticles on metal surfaces, which we demonstrate also for MoS₂ on Au(111), WS₂ on Au(111), and WS₂ on Ag(111). This work demonstrates how the properties of nanostructured transition metal dichalcogenides and similar layered systems can be modified by the choice of supporting metal.

Versatile Homebuilt Gas Feed and Analysis System for Operando TEM of Catalysts at Work

Understanding how catalysts work during chemical reactions is crucial when developing efficient catalytic materials. The dynamic processes involved are extremely sensitive to changes in pressure, gas environment and temperature. Hence, there is a need for spatially resolved operando techniques to investigate catalysts under working conditions and over time. The use of dedicated operando techniques with added detection of catalytic conversion presents a unique opportunity to study the mechanisms underlying the catalytic reactions systematically. Herein, we report on the detailed setup and technical capabilities of a modular, homebuilt gas feed system directly coupled to a quadrupole mass spectrometer, which allows for operando transmission electron microscopy (TEM) studies of heterogeneous catalysts. The setup is compatible with conventional, commercially available gas cell TEM holders, making it widely accessible and reproducible by the community. In addition, the operando functionality of the setup was tested using CO oxidation over Pt nanoparticles.

Structure of two-dimensional Fe3O4

We have investigated the structure of an ultrathin iron oxide phase grown on Ag(100) using surface x-ray diffraction in combination with Hubbard-corrected density functional theory (DFT+U) calculations. The film exhibits a novel structure composed of one close-packed layer of octahedrally coordinated Fe²⁺ sandwiched between two close-packed layers of tetrahedrally coordinated Fe³⁺ and an overall stoichiometry of Fe₃O₄. As the structure is distinct from bulk iron oxide phases and the coupling with the silver substrate is weak, we propose that the phase should be classified as a metastable two-dimensional oxide. The chemical and physical properties are potentially interesting, thanks to the predicted charge ordering between atomic layers, and analogy with bulk ferrite spinels suggests the possibility of synthesis of a whole class of two-dimensional ternary oxides with varying electronic, optical, and chemical properties.

Synergism of Iron and Platinum Species for Low-Temperature CO Oxidation: From Two-Dimensional Surface to Nanoparticle and Single-Atom Catalysts

CO oxidation is one of the most studied reactions in heterogeneous catalysis. It is present in air cleaning and automotive emission control. It also participates in the removal of CO from streams of hydrogen used in fuel cells. Because of the competitive adsorption of CO and O₂ over active sites, the use of Pt-based catalysts for low-temperature CO oxidation remains a challenge. Recently, great progress has been made with catalysts containing Pt-Fe species because of the contribution of Fe species to O₂ activation. The structure-activity relationship and reaction mechanisms have been investigated with various Pt-Fe catalysts. In this Perspective, we give a summary of the recent advances of low-temperature CO oxidation over Pt-Fe catalysts with a focus on the synergistic effect of Pt and Fe species in the CO and O₂ activation of catalytic reactions. Future prospects for the preparation of highly effective Pt-Fe catalysts are also proposed.

Reversible oxidation and reduction of gold-supported iron oxide islands at room temperature

Monolayer iron oxides grown on metal substrates have widely been used as model systems in heterogeneous catalysis. By means of ambient-pressure scanning tunneling microscopy (AP-STM), we studied the in situ oxidation and reduction of FeO(111) grown on Au(111) by oxygen (O₂) and carbon monoxide (CO), respectively. Oxygen dislocation lines present on FeO islands are highly active for O₂ dissociation. X-ray photoelectron spectroscopy measurements distinctly reveal the reversible oxidation and reduction of FeO islands after sequential exposure to O₂ and CO. Our AP-STM results show that excess O atoms can be further incorporated on dislocation lines and react with CO, whereas the CO is not strong enough to reduce the FeO supported on Au(111) that is essential to retain the activity of oxygen dislocation lines.

Interface-confined triangular FeOx nanoclusters on Pt(111)

Under the oxidizing condition, the cheap metal component of bimetallic catalysts often segregates to the surface and forms oxide nanoclusters (NCs) supported on the metal surface, which exhibit unique structures and catalytic properties drastically different from the corresponding bulk materials. Here, density functional theory calculations are employed to describe the atomic and electronic structures of a series of triangular FeO_x NCs confined on Pt(111) with the size ranging from ∼0.3 nm to ∼2.2 nm, which behave differently from the FeO film reported previously. The lattice of supported FeO_x NCs on Pt(111) is found to vary not only with the NC size but also with the Fe/O ratio or the edge termination. Owing to a strong FeO_x-Pt interaction, the heterogeneous distribution of local atomic and electronic structures of Fe across the FeO_x NC is observed, though most of Fe atoms are positioned at the threefold hollow site of Pt(111). Our study not only sheds light on the catalytically active sites of supported FeO_x NCs but also provides guidance for the design of highly active and stable oxide nanocatalysts under reactive environment.

Atomic-Scale View of the Oxidation and Reduction of Supported Ultrathin FeO Islands

By means of scanning tunneling microscopy (STM) measurements, we studied in situ the oxidation and reduction of FeO bilayer islands on Au(111) by oxygen (O₂) and hydrogen (H₂), respectively. The FeO islands respond very dynamically toward O₂, with the coordinatively unsaturated ferrous (CUF) sites at the island edges being essential for O₂ dissociation and O atom incorporation. An STM movie obtained during oxidation reveals how further O₂ molecules can dissociate after the consumption of all initially existing CUF sites through the formation of new CUF sites. In contrast, we found that H₂ molecules only dissociate when vibrationally excited through the ion gauge and only at the basal plane of FeO islands, implying that the CUF sites are not relevant for H₂ dissociation. Our STM results reveal how excess O atoms are incorporated and released in O₂ and H₂ and thus shed light onto the stability of inverse catalysts during a catalyzed reaction.

Controlling the charge state of supported nanoparticles in catalysis: lessons from model systems

Model systems are very important to identify the working principles of real catalysts, and to develop concepts that can be used in the design of new catalytic materials.

Structure and Electronic Properties of Interface-Confined Oxide Nanostructures

The controlled fabrication of nanostructures has often used a substrate template to mediate and control the growth kinetics. Electronic substrate-mediated interactions have been demonstrated to guide the assembly of organic molecules or the nucleation of metal atoms but usually at cryogenic temperatures, where the diffusion has been limited. Combining STM, STS, and DFT studies, we report that the strong electronic interaction between transition metals and oxides could indeed govern the growth of low-dimensional oxide nanostructures. As a demonstration, a series of FeO triangles, which are of the same structure and electronic properties but with different sizes (side length >3 nm), are synthesized on Pt(111). The strong interfacial interaction confines the growth of FeO nanostructures, leading to a discrete size distribution and a uniform step structure. Given the same interfacial configuration, as-grown FeO nanostructures not only expose identical edge/surface structure but also exhibit the same electronic properties, as manifested by the local density of states and local work functions. We expect the interfacial confinement effect can be generally applied to control the growth of oxide nanostructures on transition metal surfaces. These oxide nanostructures of the same structure and electronic properties are excellent models for studies of nanoscale effects and applications.

Immobilization of Pt Nanoparticles via Rapid and Reusable Electropolymerization of Dopamine on TiO2 Nanotube Arrays for Reversible SERS Substrates and Nonenzymatic Glucose Sensors

Inspired by mussel-adhesion phenomena in nature, polydopamine (PDA) coatings are a promising route to multifunctional platforms for decorating various materials. The typical self-polymerization process of dopamine is time-consuming and the coatings of PDA are not reusable. Herein, a reusable and time-saving strategy for the electrochemical polymerization of dopamine (EPD) is reported. The PDA layer is deposited on vertically aligned TiO₂ nanotube arrays (NTAs). Owing to the abundant catechol and amine groups in the PDA layer, uniform Pt nanoparticles (NPs) are deposited onto the TiO₂ NTAs and can effectively prevent the recombination of electron-hole pairs generated from photo-electrocatalysis and transfer the captured electrons to participate in the photo-electrocatalytic reaction process. Compared with pristine TiO₂ NTAs, the as-prepared Pt@TiO₂ NTA composites exhibit surface-enhanced Raman scattering sensitivity for detecting rhodamine 6G and display excellent UV-assisted self-cleaning ability, and also show promise as a nonenzymatic glucose biosensor. Furthermore, the mussel-inspired electropolymerization strategy and the fast EPD-reduced nanoparticle decorating process presented herein can be readily extended to various functional substrates, such as conductive glass, metallic oxides, and semiconductors. It is the adaptation of the established PDA system for a selective, robust, and generalizable sensing system that is the emphasis of this work.

Enhanced oxidation resistance of active nanostructures via dynamic size effect

A major challenge limiting the practical applications of nanomaterials is that the activities of nanostructures (NSs) increase with reduced size, often sacrificing their stability in the chemical environment. Under oxidative conditions, NSs with smaller sizes and higher defect densities are commonly expected to oxidize more easily, since high-concentration defects can facilitate oxidation by enhancing the reactivity with O2 and providing a fast channel for oxygen incorporation. Here, using FeO NSs as an example, we show to the contrary, that reducing the size of active NSs can drastically increase their oxidation resistance. A maximum oxidation resistance is found for FeO NSs with dimensions below 3.2 nm. Rather than being determined by the structure or electronic properties of active sites, the enhanced oxidation resistance originates from the size-dependent structural dynamics of FeO NSs in O2. We find this dynamic size effect to govern the chemical properties of active NSs.

Edge reactivity and water-assisted dissociation on cobalt oxide nanoislands

Transition metal oxides show great promise as Earth-abundant catalysts for the oxygen evolution reaction in electrochemical water splitting. However, progress in the development of highly active oxide nanostructures is hampered by a lack of knowledge of the location and nature of the active sites. Here we show, through atom-resolved scanning tunnelling microscopy, X-ray spectroscopy and computational modelling, how hydroxyls form from water dissociation at under coordinated cobalt edge sites of cobalt oxide nanoislands. Surprisingly, we find that an additional water molecule acts to promote all the elementary steps of the dissociation process and subsequent hydrogen migration, revealing the important assisting role of a water molecule in its own dissociation process on a metal oxide. Inspired by the experimental findings, we theoretically model the oxygen evolution reaction activity of cobalt oxide nanoislands and show that the nanoparticle metal edges also display favourable adsorption energetics for water oxidation under electrochemical conditions.

Highly active and stable interface derived from Pt supported on Ni/Fe layered double oxides for HCHO oxidation

In this work, Ni/Fe layered double oxide supported Pt nanoparticles (Pt/LDO(N)) were prepared using a hydrothermal and colloid-impregnation method. The catalyst exhibited remarkable HCHO oxidation ability and long-time stability.

Fe Oxides on Ag Surfaces: Structure and Reactivity

One layer thick iron oxide films are attractive from both applied and fundamental science perspectives. The structural and chemical properties of these systems can be tuned by changing the substrate, making them promising materials for heterogeneous catalysis. In the present work, we investigate the structure of FeO(111) monolayer films grown on Ag(100) and Ag(111) substrates by means of microscopy and diffraction techniques and compare it with the structure of FeO(111) grown on other substrates reported in literature. We also study the NO adsorption properties of FeO(111)/Ag(100) and FeO(111)/Ag(111) systems utilizing different spectroscopic techniques. We discuss similarities and differences in the data obtained from adsorption experiments and compare it with previous results for FeO(111)/Pt(111).