Superconducting Continuous Graphene Fibers via Calcium Intercalation

Macroscopic assembly of 2D materials for energy storage and seawater desalination

Since the discovery of graphene in 2004, two-dimensional (2D) materials have attracted widespread attention due to their excellent physical and chemical properties in the fields of energy, environment, catalysis, and optoelectronics. However, there are still many key problems in the process of practical application. To further promote the potential of 2D materials for practical applications, macroscopic assembly of 2D materials is crucial for the continued development of 2D materials, especially in the fields of energy storage and seawater desalination. Therefore, this review focuses on the latest progress and current status related to the macroscopic assembly of 2D materials, including 1D fibers, 2D films, and 3D architectures. In addition, the application of macroscopic bodies assembled based on 2D materials in the fields of energy storage and seawater desalination is also introduced. Finally, future directions for the macroscopic assembly of 2D materials and their applications are prospected.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Carbonene Fibers: Toward Next-Generation Fiber Materials

The development of human society has set unprecedented demands for advanced fiber materials, such as lightweight and high-performance fibers for reinforcement of composite materials in frontier fields and functional and intelligent fibers in wearable electronics. Carbonene materials composed of sp²-hybridized carbon atoms have been demonstrated to be ideal building blocks for advanced fiber materials, which are referred to as carbonene fibers. Carbonene fibers that generally include pristine carbonene fibers, composite carbonene fibers, and carbonene-modified fibers hold great promise in transferring the extraordinary properties of nanoscale carbonene materials to macroscopic applications. Herein, we give a comprehensive discussion on the conception, classification, and design strategies of carbonene fibers and then summarize recent progress regarding the preparations and applications of carbonene fibers. Finally, we provide insights into developing lightweight, high-performance, functional, and intelligent carbonene fibers for next-generation fiber materials in the near future.

Single-layer polymeric tetraoxa[8]circulene modified by s-block metals: toward stable spin qubits and novel superconductors

Tunable electronic properties of low-dimensional materials have been the object of extensive research, as such properties are highly desirable in order to provide flexibility in the design and optimization of functional devices. In this study, we account for the fact that such properties can be tuned by embedding diverse metal atoms and theoretically study a series of new organometallic porous sheets based on two-dimensional tetraoxa[8]circulene (TOC) polymers doped with alkali or alkaline-earth metals. The results reveal that the metal-decorated sheets change their electronic structure from semiconducting to metallic behaviour due to n-doping. Complete active space self-consistent field (CASSCF) calculations reveal a unique open-shell singlet ground state in the TOC-Ca complex, which is formed by two closed-shell species. Moreover, Ca becomes a doublet state, which is promising for magnetic quantum bit applications due to the long spin coherence time. Ca-doped TOC also demonstrates a high density of states in the vicinity of the Fermi level and induced superconductivity. Using the ab initio Eliashberg formalism, we find that the TOC-Ca polymers are phonon-mediated superconductors with a critical temperature T_C = 14.5 K, which is within the range of typical carbon based superconducting materials. Therefore, combining the proved superconductivity and the long spin lifetime in doublet Ca, such materials could be an ideal platform for the realization of quantum bits.

Graphene-Based Fibers: Recent Advances in Preparation and Application

Graphene-based fibers (GBFs) are macroscopic 1D assemblies formed by using microscopic 2D graphene sheets as building blocks. Their unique structure exhibits the same merits as graphene such as low weight, high specific surface area, excellent mechanical/electrical properties, and ease of functionalization. Furthermore, the fibrous nature of GBFs is intrinsically compatible with existing textile technologies, making them suitable for applications in flexible and wearable electronics. Recently, novel synthetic methods have endowed GBFs with new structures and functions, further improving their mechanical and electrical properties. These improvements have rapidly bridged the gaps between laboratory demonstrations and real-life applications in fiber-shaped batteries, supercapacitors, and electrochemical sensors. Recent advances in the fabrication, optimization, and application of GBFs are systematically reviewed and a perspective on their future development is given.

A Review on Graphene Fibers: Expectations, Advances, and Prospects

Graphene fiber (GF) is a macroscopically assembled fibrous material made of individual units of graphene and its derivatives. Beyond traditional carbon fibers, graphene building blocks consisting of regulable sizes and regular orientations of GF are expected to generate extreme mechanical and transport properties, as well as multiple functions in smart electronic fibrous devices and textiles. Here, the features of GF are presented along four lines: preparation, morphology, structure-performance correlations, and state-of-the-art applications as flexible and wearable electronics. The principles, experiments, and keys of fabricating GF from graphite with different methods, focusing on the industrially viable mainstream strategy, wet spinning, are introduced. Then, the fundamental relationship between the mechanical and transport properties and the structure, including both highly condensed structures for high-performance and hierarchical structures for multiple functions, is presented. The advances of GF based on structure-performance formulas boost its functional applications, especially in electronic devices. Finally, the possible promotion methods and structural-functional integrated applications of GF are discussed.

2D Crystal-Based Fibers: Status and Challenges

2D crystals are emerging new materials in multidisciplinary fields including condensed state physics, electronics, energy, environmental engineering, and biomedicine. To employ 2D crystals for practical applications, these nanoscale crystals need to be processed into macroscale materials, such as suspensions, fibers, films, and 3D macrostructures. Among these macromaterials, fibers are flexible, knittable, and easy to use, which can fully reflect the advantages of the structure and properties of 2D crystals. Therefore, the fabrication and application of 2D crystal-based fibers is of great importance for expanding the impact of 2D crystals. In this Review, 2D crystals that are successfully prepared are overviewed based on their composition of elements. Subsequently, methods for preparing 2D crystals, 2D crystals dispersions, and 2D crystal-based fibers are systematically introduced. Then, the applications of 2D crystal-based fibers, such as flexible electronic devices, high-efficiency catalysis, and adsorption, are also discussed. Finally, the status-of-quo, perspectives, and future challenges of 2D crystal-based fibers are summarized. This Review provides directions and guidelines for developing new 2D crystal-based fibers and exploring their potentials in the fields of smart wearable devices.

Multifunctional reduced graphene oxide-CVD graphene core-shell fibers

The insufficient electrical conductivity and mechanical stretchability of conventional graphene fibers based on reduced graphene oxide liquid crystals (rGO-LCs) has limited their applications to numerous textile devices. Here, we report a simple method to fabricate multifunctional fibers with mechanically strong rGO cores and highly conductive CVD graphene shells (rGO@Gr fibers), which show an outstanding electrical conductivity as high as ∼137 S cm-1 and a failure strain value of 21%, which are believed to be the highest values among polymer-free graphene fibers. We also demonstrate the use of the rGO@Gr fibers for high power density supercapacitors with enhanced mechanical stability and durability, which would enable their practical applications in various smart wearable devices in the future.

Superconductivity in bilayer graphene intercalated with alkali and alkaline earth metals

With the enormous research activity focused on graphene in recent years, it is not surprising that graphene superconductivity has become an attractive area of research. To date, no superconducting properties have been experimentally observed in the pristine form of graphene but controllable structure manipulation is a promising way to induce a superconducting state in graphene-based systems. Therefore, herein we investigate the possible superconductivity in two-layer graphene intercalated with atoms of alkali and alkaline earth metals. Results of our calculations conducted within the framework of density functional theory combined with the Eliashberg theory allow us to conclude that the Cooper pairing in these superconductors can be described in a standard phonon-mediated scenario. In this regime, C6XC6 (X = K, Ca, Rb and Sr) are expected to be superconductors with estimated superconducting critical temperatures of 5.47-14.56 K and with the ratios of energy gap to transition temperature exceeding the value predicted by the Bardeen-Cooper-Schrieffer theory.

3D Graphene Fibers Grown by Thermal Chemical Vapor Deposition

3D assembly of graphene sheets (GSs) is important for preserving the merits of the single-atomic-layered structure. Simultaneously, vertical growth of GSs has long been a challenge for thermal chemical vapor deposition (CVD). Here, vertical growth of the GSs is achieved in a thermal CVD reactor and a novel 3D graphene structure, 3D graphene fibers (3DGFs), is developed. The 3DGFs are prepared by carbonizing electrospun polyacrylonitrile fibers in NH₃ and subsequently in situ growing the radially oriented GSs using thermal CVD. The GSs on the 3DGFs are densely arranged and interconnected with the edges fully exposed on the surface, resulting in high performances in multiple aspects such as electrical conductivity (3.4 × 10⁴ -1.2 × 10⁵ S m^-1 ), electromagnetic shielding (60 932 dB cm² g^-1 ), and superhydrophobicity and superoleophilicity, which are far superior to the existing 3D graphene materials. With the extraordinary properties along with the easy scalability of the simple thermal CVD, the novel 3DGFs are highly promising for many applications such as high-strength and conducting composites, flexible conductors, electromagnetic shielding, energy storage, catalysis, and separation and purification. Furthermore, this strategy can be widely used to grow the vertical GSs on many other substrates by thermal CVD.

An open holey structure enhanced rate capability in a NaTi2(PO4)3/C nanocomposite and provided ultralong-life sodium-ion storage

Sodium-ion battery (SIB) technology is competitive in the fields of transportation and grid storage, which require electrode materials showing rapid energy conversion (high rate capability) and long cycle life. In this work, a NaTi₂(PO₄)₃/C (NTP/C) nanocomposite with an open holey-structured framework was successfully prepared for the first time using a solvothermal reaction followed by pyrolysis. The nanocomposite realized fast sodium-ion transport and thus preferable battery performances. Within the wide rate range of 0.5-50C, only a very small decrease in capacity from 124 to 120 mA h g^-1 was observed. A high discharge capacity of 103 mA h g^-1 (88.3% retention of the 1st cycle) was delivered even after 10 000 cycles at an ultrahigh rate of 50C without any obvious morphological change and without structural pulverization. Forming open channels for ion transport proved to contribute to such performance enhancement and therefore has the potential to become a universal model for the development of sustainable electrode materials in SIBs and other battery systems.

Ultrasonic-assisted preparation of graphene oxide carboxylic acid polyvinyl alcohol polymer film and studies of thermal stability and surface resistivity

In this paper, flake graphite, nitric acid and acetic anhydride are used to prepare graphene oxide carboxylic acid (GO-COOH) via an ultrasonic-assisted method, and GO-COOH and polyvinyl alcohol polymer (PVA) are used to synthesize graphene oxide carboxylic acid polyvinyl alcohol polymer (GO-COOPVA) via the ultrasonic-assisted method, and GO-COOPVA is used to manufacture graphene oxide carboxylic acid polyvinyl alcohol polymer film (GO-COOPVA film) via a solidification method, and the structure and morphology of GO-COOH, GO-COOPVA and GO-COOPVA film are characterized, and the thermal stability and surface resistivity are measured in the case of the different amount of GO-COOH. Based on the characterization and measurement, it has been successively confirmed and attested that carboxyl groups implant on 2D lattice of GO to form GO-COOH, and GO-COOH and PVA have the esterification reaction to produce GO-COOPVA, and GO-COOPVA consists of 2D lattice of GO-COOH and the chain of PVA connected in the form of carboxylic ester, and GO-COOPVA film is composed of GO-COOPVA, and the thermal stability of GO-COOPVA film obviously improves in comparison with PVA film, and the surface resistivity of GO-COOPVA film clearly decreases.

Unprecedented sensitivity towards pressure enabled by graphene foam

Reduced graphene oxide foam (RGOF)-based pressure sensors have been fabricated through the combination of ultrasonic dispersion and freeze-drying methods. Due to the maintenance of the highly disordered structure of the ultrasonic dispersed graphene oxides before the freezing process, the RGOF sensors demonstrated an ultra-high sensitivity of 22.8 kPa^-1, an ultra-low detection limit of around 0.1 Pa, and a superior separation of 0.2-Pascal-scale difference.

Wrinkle-stabilized metal-graphene hybrid fibers with zero temperature coefficient of resistance

The interfacial adhesion between graphene and metals is poor, as metals tend to generate superlubricity on smooth graphene surface. This problem renders the free assembly of graphene and metals to be a big challenge, and therefore, some desired conducting properties (e.g., stable metal-like conductivities in air, lightweight yet flexible conductors, and ultralow temperature coefficient of resistance, TCR) likely being realized by integrating the merits of graphene and metals remains at a theoretical level. This work proposes a wrinkle-stabilized approach to address the poor adhesion between graphene surface and metals. Cyclic voltammetry (CV) tests and theoretical analysis by Scharifker-Hills models demonstrate that multiscale wrinkles effectively induce nucleation of metal particles, locking in metal nuclei and guiding the continuous growth of metal islands in an instantaneous model on rough graphene surface. The universality and practicability of the wrinkle-stabilized approach is verified by our investigation through the electrodeposition of nine kinds of metals on graphene fibers (GF). The strong interface bonding permits metal-graphene hybrid fibers to show metal-level conductivities (up to 2.2 × 10⁷ S m^-1, a record high value for GF in air), reliable weatherability and favorable flexibility. Due to the negative TCR of graphene and positive TCR of metals, the TCR of Cu- and Au-coated GFs reaches zero at a wide temperature range (15 K-300 K). For this layered model, the quantitative analysis by classical theories demonstrates the suitable thickness ratio of graphene layer and metal layer to achieve zero TCR to be 0.2, agreeing well with our experimental results. This wrinkle-stabilized approach and our theoretical analysis of zero-TCR behavior of the graphene-metal system are conducive to the design of high-performance conducting materials based on graphene and metals.

Graphene-Fiber-Based Supercapacitors Favor N-Methyl-2-pyrrolidone/Ethyl Acetate as the Spinning Solvent/Coagulant Combination

One-dimensional flexible fiber supercapacitors (FSCs) have attracted great interest as promising energy-storage units that can be seamlessly incorporated into textiles via weaving, knitting, or braiding. The major challenges in this field are to develop tougher and more efficient FSCs with a relatively easy and scalable process. Here, we demonstrate a wet-spinning process to produce graphene oxide (GO) fibers from GO dispersions in N-methyl-2-pyrrolidone (NMP), with ethyl acetate as the coagulant. Upon chemical reduction of GO, the resulting NMP-based reduced GO (rGO) fibers (rGO@NMP-Fs) are twice as high in the surface area and toughness but comparable in tensile strength and conductivity as that of the water-based rGO fibers (rGO@H₂O-Fs). When assembled into parallel FSCs, rGO@NMP-F-based supercapacitors (rGO@NMP-FSCs) offered a specific capacitance of 196.7 F cm^-3 (147.5 mF cm^-2), five times higher than that of rGO@H₂O-F-based supercapacitors (rGO@H₂O-FSCs) and also higher than most existing wet-spun rGO-FSCs, as well as those FSCs built with metal wires, graphene/carbon nanotube (CNT) fibers, or even pseudocapacitive materials. In addition, our rGO@NMP-FSCs can provide good bending and cycling stability. The energy density of our rGO@NMP-FSCs reaches ca. 6.8 mWh cm^-3, comparable to that of a Li thin-film battery (4 V/500 μAh).